External Hard Drive - One Partition shows no files.

I have an airport extreme with a WD 600 GB HD hooked up to the USB port. I have 2 partitions on the HD, the apple parition works fine (I am using it as my time capsule HD) The FAT32 partition shows up on the desktop and in the finder, but I can't see any files. I can see the files fine if I plug the HD straight to my macbook. HELP!

No ideas? I think I might backup that partition and redo it as an apple partition. Good idea?

Similar Messages

  • External Hard Drive is Not Showing Up on Desk top?

    My external hard drive is not showing up on my desk top any more. When I tried to reconnect it I get the follow message.
    You have inserted a disk containing no volumes that Mac OS X can read. To use the unreadable volumes, click Initialize.
    Help what should I do? I have 50 GB of music on it and it's never had this problem before.
    Thanks
    Jeremy

    Norton has a bad reputation because they have not kept up with changes in the Mac file structure. Norton version 8 is the one you should be using, if you choose to use it. Earlier versions will likely damage your directory, possibly beyond repair by other utilities.
    Any time you use any Disk Repair Utility, it is somewhat of a crap shoot. It may or may not be able to make the repair, and you may or may not lose a few to very many files in the process. The program best respected in this arena is Disk Warrior. If you choose to buy it, pay very close attention to which version you are buying, as the latest version CD (intended to boot 10.3 or 10.4) may not boot on your Mac.

  • I have some stuff i want to put on external hard drive when i drag the file or files it just puts them back

    i have some stuff i want to put on external hard drive when i drag the file or files it just puts them back

    Did you format the external disk on Windows? If you did this, probably the external disk is formatted in NTFS. OS X can't write on this format, so it's normal that it doesn't allow you to copy the files.
    In this case, you have three possibilities:
    1. Install Paragon NTFS. This program allows you to write on NTFS partitions.
    2. Copy the hard drive content to your internal disk and format the external disk with Mac OS Extended (Journaled). Do it only if you are going to use the external disk only with OS X.
    3. The same as the last one but formatting it with exFAT. This filesystem is compatible with Windows (XP, Vista, 7, 8) and OS X (10.6.5 and newer), so you can write and read files on external disks formatted with it on Windows and OS X, but you may have problems on Linux

  • My Western Digital external hard drive suddenly stopped showing up on my Macbook Pro and disappeared from Disk Utility. It works on a PC.

    My Western Digital external hard drive suddenly stopped showing up on my macbook pro and it disappeared from disk utility. I have tried making invisible files visible but nothing has worked and my hard drive shows up on a PC but not my Mac anymore.

    What is the manufacturer of the external and how old is it? Does it have its own AC power supply or is it USB bus powered?

  • External Hard Drive no longer showing in Devices

    My external hard drive no longer shows up as a device on my MBP. It has worked fine since the day I plugged it in.
    The Time Machine is using the HD, and continues to do it's backups, so power and USB connection is not an issue
    The HD shows up in Disk Utility (The Time Machine portion AND the partition that I've been using for storage)
    I ran a repair on the partition in Disk Utility and it checks out OK
    I can access this partition from VMware Fusion, so the windows side of the MBP sees it, and it's operational
    Used the HD all day yesterday without issue
    I've restarted the MBP to see if it would find the HD partition after a restart, it doesn't
    I've unplugged (USB) and powered-off the HD, and when I power-on, it still isn't seen.
    Any ideas?
    John

    If TM is turned on and it still doesn't show up then do a SMC reset.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • External Hard Drives: One for backup and one for storage

    Is it possible to have two external hard drives, one firewire and the other usb, using one as an additional hard drive, and the other as the backup drive, and backup from the external that is the additional hard drive to the the other which is the external back up drive?

    Wunjo:
    Welcome to Apple Discussions.
    It is possible, but not necessary. If you have a large enough firewire HDD you can partition it so that one partition is approximately the size (capacity) of your internal HDD. Then you can make a bootable clone of your internal HDD to this partition using a utility like SuperDuper or Carbon Copy Cloner. You can then regularly update this partition so that you always have an up-to-date backup of your internal HDD. This will serve as a backup of your internal HDD, as well as an emergency boot drive. You can also boot the computer from it to run diagnostic tests and repairs on the internal HDD.
    The rest of your HDD can be used for whatever you wish. You can create additional partitions for different purposes, or just leave one large partition as a storage or work area. If you need directions for partitioning your HDD, do post back and ask.
    Of course, if you already have a firewire and a USB drive, you can use them as indicated. In any case, you can partition the drives to serve multiple purposes.
    Please do post back with further questions or comments.
    Cheers
    cornelius

  • HELP! External hard drive won't show up in finder!

    Last night, I was updating my macbook (from August 2008, still runs on leopard) and it needed to restart. I forgot to eject my LaCie Porsche 1tb external hard drive first and, when it rebooted, I got the error of death (aka "disk was not ejected..."). When connected to the USB port, the drive lights up, I can hear it spinning, but it won't show up in finder and I can't see it in Disk Utility to repair it (after the first error of death, the computer wouldn't even acknowledge that I had the drive plugged in). I've tried plugging it into the different USB ports and even on a different macbook, but no luck in getting the computer to recognize it long enough to use Disk Utility or DiskWarrior. Any tips on how I can get my macbook to read the drive again?

    If the external hard drive is not showing up in Disk Utility when connected to two or more different computers, then the problem is with the hard drive, it is broken. Get a new one.

  • I get the following error when formatting a external hard drive. Partition failed with the error:  POSIX reports: The operation couldn't be completed. Cannot allocate memory

    I get the following error when formatting a external hard drive.
    Partition failed with the error: 
    POSIX reports: The operation couldn’t be completed. Cannot allocate memory
    I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
    Is there any fixes?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • I recently updated my Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    Can you see them in Disk Utility?
    If so, can you select and Mount them?
    If not, disconnect them, reset the iMac's SMC and then reconnect them.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.

  • Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

    Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?

    Type move itunes library into the google serach bar.
    It has always been very basic to always maintain  abackup copy of your computer.  Do you not have a backup copy?

  • My external hard drive doesn't show up in finder, is it dead?

    My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
    I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
    Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

    If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
    If the Disk Utility doesn't see it, contact professional support.
    (64290)

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • External hard drive does not show up

    External hard drive does not show up in imovie.

    Hi,
    Welcome to the Discussions.
    The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
    John

  • External hard drive is not showing up when attached by USB

    My WD External Hard drive is not showing up on my iMac when i connect it by USB

    Hi, does that mean it shows up some other way of connecting it?
    Is it Bus powered or does it have AC power?

  • My external hard drive does not show up on my desktop

    My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive  and that showed up on my desktop.Any help????

    if it is NTFS then you need Paragon Software NTFS for Mac.
    NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
    If it is not NTFS then you need more details. Need more anyway.
    PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

Maybe you are looking for

  • Itunes won't import or convert .wav files?

    I have a bunch of .wav files that I wanted to import to itunes, so that I could convert/burn them to cd's. I don't have any problem playing the files in Quicktime. But when I import them, although it appears to work fine, if I try to play it, it won'

  • My iPhone 4S just turned off for no reason and won't turn back on?

    My iPhone 4S just died for no apparent reason and now it will not turn back on. It was at about 90% battery at the time because I had just recently charged it so I don't think it died because of low battery. I have tried plugging it into outlets and

  • Error message when connecting

    Just got a brand new ipod and when i connect to sync i get a "unknown error" message. HELP!!!!

  • "cannot open x.idd" in InDesign CS5.5 7.5 (Win7)

    Hello, I found some topics on this issue but didn't feel that they specific enough. I was working on an .idd file last night and saved it before going to bed. Now I get "Cannot open ..." when I try to open it. I can open any other idd file on my comp

  • Ajax Framework Navigation Detection

    Hi    We are currently adapting a component to work with every framework on the portal.    This component has to detect navigation(and respective node) and then do a amount of actions on pre-defined services with Java Code.   The problem is as far as