External hard drive that is not connected through a network

Will Time Machine work with an external WD hard drive that is connected through my network at home. I plan to connect the drive via by internet router or Airport Express. Can TM use any drive that my MacBook can see? (except for my local hard drive of course)

Thanks...the cable is pretty sturdy as is--plus the drive appears in the panel in Disc Utility, just not on desktop (?). Sorry can you elaborate on SMC?
I decided to try to recover some of the data using Data Rescue II--so far not able to get it off the drive, but I've had very good success with this app in the past. I was hoping for some similar suggestion like command-T (target disc mode as with firewire hard drives) but I don't know if this works with USB drives.

Similar Messages

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Screensaver won't automatically bring up picture from my iphoto since I switched to Mountain Lion.  Any suggestions on how to get it to work.  My photos are located on an external hard drive that I keep connected to my laptop.

    My screensaver won't automatically bring up pictures from my iphoto albums as it always did in the past since I installed Mountain Lion.  I do use an external hard drive to save all my pictures and music on that is always connected to my MacBookPro.  Any suggestions what I may be doing wrong.  I find it frustrating to have to set it daily as I close my computer down every night.

    Back up all data.
    Quit System Preferences if it's open.
    Triple-click the line below to select it:
    ~/Library/Preferences/ByHost
    Right-click or control-click the highlighted line and select
    Services ▹ Open
    from the contextual menu. A folder should open. Inside it there should be one or more files with a long name beginning with "com.apple.screensaver." Move those files to the Trash. Set your screensaver preferences and see whether they stick.

  • How to backup external hard drive that is not mounting

    Hi sorry if this is too easy or if it has been answered--my 150GB WD USB hard drive won't mount on the desktop (I think there is a bad connection at the drive--the mini usb port seems to lose disconnect). I can see it in disk utility, and I tried repairing -- it showed an error "INVALID SIBLING LINK" and then "The volume could not be repaired."
    I was hoping a reformat might fix it, but even if it is trashed, how do I back this thing up when it won't mount (still can see in disk utility).
    Thanks,
    J.

    Thanks...the cable is pretty sturdy as is--plus the drive appears in the panel in Disc Utility, just not on desktop (?). Sorry can you elaborate on SMC?
    I decided to try to recover some of the data using Data Rescue II--so far not able to get it off the drive, but I've had very good success with this app in the past. I was hoping for some similar suggestion like command-T (target disc mode as with firewire hard drives) but I don't know if this works with USB drives.

  • Can I access an external hard drive that is attached to my wireless network/router?

    Ok, so after a couple deployments and time in the military, my collection of movies and tv shows has grown to crazy amounts. Being married, I want to access all these files on the home tv. I have all my movies onto one hard drive. That hard drive is attached to a Belkin N600 router. The router is then attached to the ATT U-Verse. My question, is how do I access the movies on the hard drive? I plan on playing them through the HDMI adapter on my iPad. I have tried File Browser and File Manager. So what are my options now? I feel like its close, but just barely out of my reach to get it all set up.

    First off you will only be able to acess the content on the drive when you are at home where the drive is.  To access them you need to add them to iTunes on your computer then access them on the iPad though the Home Sharing service.
    I would skip trying to play them though the iPad though.  You will make your life a lot eaiser if you spend the $100 and just buy AppleTV.  It will make this MUCH eaiser.  As well as give you access to your music, photos, etc.
    Also as I am writing this I just realized if you have upgraded to iOS7 your iPad will probably not be able to play those movies.  iOS apprenlty will only play video purchased from iTunes.  It will not even play videos recorded by iOS6.

  • I have purchased a Seagate 1Tb external hard drive.  Will not connect to imac

    Seagate 1TB external hardrive

    We're missing a ton of information. How are you connecting it? Is it new (with warranty)? Give us more info.

  • Premier Pro Project: Created on one External Hard Drive, Transferred to Different External Hard Drive, Project Will Not Open

    Here is my problem listed in simple steps:
    I created a project in Premier a couple years ago on a G-Raid mini external hard drive.
    I backed up my project folder on a LaCie external hard drive. 
    The G-Raid mini hard drive died.
    I cannot open my project from the LaCie drive.
    When I attempt to open my project, I get 2 error messages:
    First:  "The scratch disks are write protected or unavailable. To open this project, the scratch disks will be set to your documents folder. Would you like to continue?"
    I say "Yes"
    Second: "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
    I say "OK", and that's the end.
    My understanding is that the problem has to do with the fact that my original scratch disks were created on the G-Raid mini hard drive, and that Premier will not open my project because the code for my .prproj file directs Premier to a hard drive that is not connected.  I have tried to edit the code in TextEdit, replacing the name of the old hard drive with the new one where the code reads:
    <project.settings.lastknowngoodprojectpath>
    This did not work.  I also tried changing the name of my new hard drive to match what the "lastknowngoodprojectpath" reads as in the code, but that did not work either.  I have searched high and low on the internet for someone who approaches the types of error messages I receive from the perspective of trying to open the project from a different hard drive, but I cannot find anyone who is specifically giving advice about this.  Any suggestions?

    I doubt that the error concerning the sequence preview preset file or codec has anything to do with the scratch disc location.
    Here are two posts specific to the second error message:
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?
    What to do when you get a preview preset codec error in Adobe Premiere Pro CS6 | Val Gameiro, Writer, Director, Filmmake…

  • I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Mac

    I just had to reformat the external hard drive that houses my iPhoto library, then restore it from a backup. Now Time Machine is telling me my backup hard drive suddenly does not have the space to complete a backup. I also noticed when I go in to Time Machine, there are only about 5 backups recorded on the ext. hard drive. There were many more before. Any idea what happened and if I have to buy a new back up hard drive?

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

    I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

    I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
    One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
    It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
    something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
    But it doesn't show in the Finder or the desktop for that matter.
    And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
    presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
    I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
    on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
    But... after that, it open a Finder window showing all my internal and external drives, but that drive's
    name is in washed grey, like if it was unmounted (see picture 2).
    When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
    BUT IT DOES NOT SHOW IN THE DESKTOP...
    that's my problem...
    I even did a Command+i for Info on the hard drive. (see picture 4)
    Can anyone shed some light on this issue?
    I would be eternally grateful!
    Thanks in advance!!!
    Cheers!

  • I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all. Can someone help?

    I am trying to confirm the time at which a particular backup occurred using an external hard drive that I have since misplaced. Although time machine lists the backup times for some backups, it does not list them for all, including the one in question. Can someone help?

    Okay, I've sussed it.  I saw a link to another discussion that hadn't turned up in any of my searches before I posted the question above.
    My Tosh HDD was formatted to FAT 32 and therefore would not be backed up by Time Machine.  I removed all data from it - nightmare as I hadn't enough space to put it on the macbook HDD, but, after trawling through numerous photos and deleting rubbish for hours, I finally made enough space and copied all data across.  Then, after clearing the data from the Tosh HDD, I used disk utilitity to reformat it to Mackintosh OS Extended.  Chose the option without kournalling because I'm not baking up onto this disk and so don't need it - according to some other discussions I found.
    When it was done I check on time machine in system prefs and once I selected options, I was able to remove it from the excluded from backups list.  Hey presto.  Now I'm moving my photo library and my music library onto the Tosh HDD and my macbook should start to breath again.  Hurray.

  • Just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented.  is it wise to do this or should i not??

    just got Prosoft drive genius 3 software, and it's telling me that the external hard drive that i am using for my time machine back up drive needs to be defragmented.  is it wise to do this or should i not??

    Let's hope a couple things: that you have bootable clones of your drives also; that the backup drive for TimeMachine has over 3x capacity of the data you plan and are storing. I would also switch TM backup drives so you have a 2nd.
    Fragmented free space affecting performance happens when the drive is too full which may mean there isn't enough free space for a full backup set.
    1.5TB for backing up 500GB, while WD Green 3TB is $140 and WD Black 1.5TB is, about the same price.
    I'd be worried about the integrity and directory, and whether you can afford to lose that drive. Defragging is also a very slow operation. the ideal: to just clone a drive, or start over with another drive and wait. cloning TM volumes has not been done or has it? SuperDuper hoped to but I don't think they or Bombich's CCC made it there.
    Trouble with highly fragged is when free space gets to 20% normally, 1/3 or so though for TM volumes, and finding where and a chunk of space for the file being written. Does TM use large spare image files of like 2GB?
    Best would be to ask in the TimeMachine section Snow Leopard
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard?view= discussions#/?tagSet=1009
    where there are some good FAQ and tutorials, and people that know the ins-and-outs and shortcomings.

  • My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

    My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

    Hello Sandra,
    The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
    Mac OS X 10.6: Recovering items using Time Machine and Spotlight
    http://support.apple.com/kb/PH6379
    Sincerely,
    Allen

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • How can I store my music files on an external hard drive and listen to them through iTunes that way?

    How can I store my music files on an external hard drive and listen to them through iTunes that way? At the moment they're both on the external hard drive and also stored on the computer but I'm quickly running out of memory on my iBook G4 so I'd like to only keep them on the external hard drive and, if possible, delete them from my computer's hard drive. At the moment, when the hard drive isn't plugged in a lot of the files won't play and I get the exclamation mark next to the particular song in iTunes, but everything plays fine when the hard drive is plugged in.
    Thank you.

    Sounds like your files are playing from the external drive already.  To check go to iTunes - Preferences - Advanced and check the Media Folder Location.  Change it to the external drive if you need to.

Maybe you are looking for