External Hard Drive Unreadable After Carbon Copy Cloner Backup

I am using a Maxtor OneTouch III Media external drive. I had formatted it to be read/writeable from Mac OS X 10.4 Tiger, and had been reading and writing files fine. Then I did a system backup to the external drive with Carbon Copy Cloner. Now when I plug the drive into the USB port, it says "the disk you inserted is not readable by this computer." I am guessing that Carbon Copy Cloner may have messed with the file system format. I had some pretty important files on there and would like to retrieve them, so I'd prefer not to reformat.
Disk Utility shows this information for the drive:
Name : Maxtor OneTouch III Media
Type : Disk
Disk Identifier : disk1
Media Name : Maxtor OneTouch III Media
Media Type : Generic
Connection Bus : USB
Connection Type : External
USB Serial Number : RA09E5XC
Writable : Yes
Ejectable : Yes
Mac OS 9 Drivers Installed : No
Location : External
Total Capacity : 149.1 GB (160,041,885,696 Bytes)
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 0
Also, Partition Scheme : Unformatted
I know that the drive had a name (besides the generic "Maxtor OneTouch III Media) before I did anything with Carbon Copy Cloner. Is my data already gone?
Message was edited by: theleez

Hi , and a warm welcome to the forums!
I think the problem is more the One-touch, they can't boot PPC Macs even via Firewire.
I think you'll have to Reformat it again... did you maybe use GUID Partition Scheme the first time?
See this, except for the GUID part...
http://carlbach.blogspot.com/2008/02/maxtor-one-touch-iii-and-formatting-on.html

Similar Messages

  • How can I move my iTunes movies from my computer to an external hard drive? After I copy them to the drive, do I just delete them from my computer? How will I be able to watch them again?

    Hi,
    I have a MacBook Air (July 2013) with the latest Mavericks OS X. I also have the lastest version of iTunes.
    My computer has very little memory left, so I wanted to free some up. When I looked, movies were taking up a considerable amount of space. I want to move them from my computer, but still be able to watch them if I want to later. I haven't purchased an external drive yet, because I didn't know what size to get. I also have a lot of Photoshop files that are taking up a lot of memory, so I might put some of those on too. Would you recommend a 1 TB one or bigger?
    Can you take me through the exact process of moving my iTunes movies to the external drive? I understand where to find the files (My Name<Music<iTunes Media<Movies), but am stuck from there. Do I simply drag them to the external drive and then delete them? Will this delete them from my iTunes library? How will I go about watching them again? I assumed that I would just plug the external hard drive in, click in the movie and watch. Is it this simple? I only want to move my movies, otherwise I would follow tutorials for backing up the library. Once you back up the movies, can you delete them from your computer?
    Thanks,
    Molly

    iTunes does not have provision for automatically storing one kind of media on a separate drive, so you have some basic decisions to make first.  Do you want these movies to still appear in your iTunes library, or are you content with browsing filenames on a drive in Finder when you want to look for one?  The second's the easiest thing because then you don't have to have an external drive permanently turned on and attached to your computer (wired or wireless).  To do that you literelly only need to drag your movies folder to an archive drive and delete movies from iTunes.  To watch them again you can add it back to iTunes while holding down the option key so the movie is used from its location on the external drive.
    There's ways to move the movies to an external drive while keeping them in iTunes but the external drive iwll always have to be turned on and connected to the computer or you will see a bunch of broken link exclamation marks.
    Realize what you are talking about is not "backup".  Backup (which you should do) is putting a second or more copy of items on external drives for the day when your internal drive fails and everything on it is lost, inclduing all your home photos and perhaps things that have been pulled from the iTunes Store and can no longer be re-downloaded.

  • I had backed up my I-tunes files to an external hard drive but after my computer crashed when I try to reload from the hard drive the message comes up saying I-tunes library cannot be read because it was created by a newer version. Help please!

    I had backed up my I-tunes files to an external hard drive but after my computer crashed and I restored it when I try to reload from the hard drive the message comes up ""I-tunes files cannot be read because it was created by a newer version of I-tunes". Help Please

    Upgrade the version of itunes on the new computer
    Itunes.com for free download.
    Peace

  • HT1338 how to copy a external hard drive to  other or  copy songs from one to  another

    how to copy a external hard drive to  other or  copy songs from one to  another

    Don't understand exactly what you want to do. Can you restate your question?
    You posted in the OS 10.3 forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
    Also you show iOS 6.1.4 on your profile. iOS 6.1.4 only runs on a iPhone, not a MacBook Pro.
     Cheers, Tom

  • How can I move photos from pictures to my Iomega external hard drive?  I have copied all photos, however it won't allow me to paste them.  The paste button is grayed out.

    How can I move photos from pictures to my external hard drive? I have copied all photos, however it won't allow me to paste the photos.  The paste button is grayed out.

    Do you want to copy some pictures to the external drive, or do you want to move your whole iPhoto library? The latter will free up hard drive space on your start up disk; the procedure is explained here:
    http://support.apple.com/kb/PH2506
    Note this is not the same as a Time Machine backup.
    If on the other hand you want to copy some photos from one drive to another, you can just drag and drop them from one location to another. This is a true copy, the originals will remain intact.

  • I did backup from my Imac to external hard drive, how can I unzip that backup to my mac

    I did backup from my Imac to external hard drive, how can I unzip that backup to my mac again

    It may be Time Machine, but Time Machine doesn't store backups in .zip folders. Open Finder and select your backup external disk in the Finder sidebar, under "Devices". If you are using Time Machine, you should see a folder called "Backups.backupdb".
    If you are using Time Machine and you want to restore a full Time Machine backup, there are different methods depending on the Mac OS X version you are using. Open  > About this Mac, see Version and tell me what version you are using

  • Help!  Photos Library copied to external hard drive, but after preparing the library I can NOT see any pictures.

    I am having a tough time and searched, but have not found an answer that works.  Last night I copied my iPhoto Library to an external hard drive because when I initially attempted to set up Photos, I got an error that said I needed 88 GB of space for the transfer.  I got the iPhoto Library onto the hard drive and reopened the app and it prepared the library.  It was talking forever, so I went to bed.  This morning, I have this screen...
    There are NO pictures in the actual app.  I went to the external hard drive and see that the Photos Library exists...
    I have tried to hold command and option and restart Photos and I did get a prompt that it was repairing; however, this was unsuccessful.  Please help!  I know the photos are there because when I show package contents, I see them all in my Masters/Old Masters folders.
    Thank you!

    Agree with baltwo, though even if you have saved the install app I wouldn't use it unless its been used to install a known good copy of the OS already.
    In your case, that probably means start fresh:
    Restart the computer, holding down 'command' and 'r'. When the recovery disk window shows, choose 'Reinstall Mac OS X'.

  • Should I set up my external hard drive as HFS when copying PC files to MAC

    I have just purchased an external hard drive and hooked it up to my PowerMac G5 running OS X. My Mac is networked to a PC via Wi-Fi. When using my Mac I can open/delete/save files to my PC and drag them to my Mac.
    I would like to back up my whole PC onto the firewire external drive. I only have a firewire connection on my Mac, so I don't want to unplug it and set it up on the PC as well.
    Are there any issues if I format the drive using Disc Utility and format it as HFS, then simply drag the files and applications from my PC to my external hard drive. If the PC fails, will I have any issues when I drag the files back to a networked PC via my Mac?

    Backing up an entire hard drive via Wi-Fi would be very slow and perhaps unreliable. I would really look into getting a firewire interface for the PC to accomplish the back-up. These cards are not very expensive and it would be a good investment.
    You may have trouble when returning files from an HFS drive to your PC. Some of the files may appear doubled as ._FILENAME and FILENAME. The ._ file is used by Mac OS and is hidden, but is not used by Windows and shows as a separate file. MacDrive6 from MediaFour (http://www.mediafour.com/products/macdrive6//) can solve this problem, as well as allow an HFS+ formatted drive to appear in the Windows explorer when connected via Firewire, but there may still be problems with a backup procedure using drag and drop. It is probably best if you want to do this to format your drive as a Windows drive.
    Also, backing up PC application and system files (or Mac ones for that matter) by dragging and dropping is a bad idea. Especially on the PC, but also occasionally on the Mac, applications install files in various system locations that are not easily accessable. It is best to restore applications and system files from the original software installation CD's or DVD's. If this is not possible, or inconvenient, look for a PC backup utility that is similar to Carbon Copy Cloner for the Mac (http://www.bombich.com/software/ccc.html). Utilities such as this can create an image of a hard disk for backup purposes on any drive recognized by the system. I am sure there are many good PC backup utilities available, many probably as freeware.

  • Backed library onto external hard drive, but after transfer, playlists, playcounts ect haven't saved?

    On my old laptop I backed up my music on to an external hard drive ready to transfer over to my new laptop.
    After copying the folder from my external to the new laptops' own drive, I duly followed instructions to restore the library.
    I thought all was well and good but I noticed that it only copied the songs.. no song history or playlists. I added a new album to the library (an annoying experience after the new update in Feb) and noticed that when I went to sync my ipod (classic), all it did was charge my ipod.
    So basically all my itunes is, is just a brand new library with my songs pasted in. Theres no history of song playcounts or playlists.
    Needless to say im very irritated, as I have had no problems in the past and seem to have lost over EIGHT YEARS of history :/ 
    The old laptop has been reformatted and wiped so I can't even go back and start again. Is there any way of moving my info from the ipod itself to the laptop?!! Any help would be appreciated, thank you.

    Ah sorted it. Basically I had renamed my iTunes folder in the hard drive, so when I transfered to My music there were two folders. I have since renamed and deleted the original iTunes folder and it works now. Thank you

  • I am trying to transfer my iTunes library via an external hard drive. It is copying the songs twice. What am I doing wrong???

    I am trying to transfer my iTunes library to a new computer via external hard drive. When I open iTunes on my new Windows 7 computer, after I have followed the tutorial on the website, I get an additional promt to "scan fror media". All the songs are copying twice. I have uninstalled the program twice and tried again with the same result. What am I doing wrong?

    Thank you for your response. I have done this...when I open the iTunes folder copied from my old computer, each song appears only once. When I open iTunes each song appears twice. Should I uninstall the iTunes folder from my old computer and reinstall it? It make no sense that I have 2 of everything in iTunes. Thank you for responding - I really appreciate it, as I don't want to have to delete each duplicate song

  • Firefox crashes after Carbon Copy Cloner

    I powered on the computer, and did not open anything other than Carbon Copy Cloner. I then copied one entire hard drive to another. Everything works, such as Thunderbird and Opera Next, except for Firefox! As it's my primary browser I have spent an hour or two trying to work out a few things. This was the second Carbon Copy Clone I did and it didn't state any errors during the copy process. Firefox was working flawlessly on the other hard drive.
    If I open Firefox it goes straight to crash reporter - no Firefox window. If I try and open profile manager the same happens, and if I try and open in safe mode the same happens. I have tried repairing disk permissions. There is no sign of Firefox being open in Activity Monitor

    please see this article and follow steps to send us the report of your crash
    [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]

  • Installing A New Hard Drive - Creating A Carbon Copy

    Hello and thanks in advance for any help you might be able to give me.
    I have a white Intel Macbook 2.1GHz that I purchased in October 2008. I'm about to upgrade it by fitting some RAM and fitting a new hard drive. I have a drive dock for the new 2.5 inch drive that I can connect via USB.
    Can anyone recommend the best method of transfering the contents of the old drive and creating a carbon copy of the original, so that when I install the new one, it runs just as before?
    Thanks again,
    Jonathan.

    I recommend SuperDuper because it's easy and it works.
    There is also Carbon Copy Cloner but I've never used it.
    As far as a method, I use these steps:
    1. Put the new drive in the enclosre.
    2. Attach the new drive to your MacBook and format it using Disk Utility.
    3. Clone your old drive to the new one.
    4. Test the new drive by booting your MacBook from it.
    5. Switch the drives.
    -GDF

  • My Time Machine stalls during initial backup on external hard drive even after several hours.

    We have been using Time Machine and an external hard drive to back up our MacBook for almost a year now.  Recently, the hard drive (using a USB) was removed without ejecting it properly.  After that, the auto backups began stalling.  We tried setting up Time Machine all over again but the initial back up stalls at different places (like 6MB of 87GB) even if it's left for several hours overnight.  Does anyone have any suggestions on how to fix this?  If not, can anyone suggest another inexpensive way of backing up our files from our MacBook? 
    Thanks!
    Shane

    It might have created a new user and loaded under that.. new user being the old user. But if you have issues do it again, only this time pick where the backup will go.
    http://pondini.org/TM/16.html
    The other questions might also be relevant as a new hard disk will make the Mac appear to the TM backup as a new computer.
    See 14-18 for restore info.

  • External hard-drive disappeared after dragging into Spotlight

    Dear users,
    My external hard-drive under devices  disappeared after I dragged it into Spotlight to reindex it to make it searchable.
    There was a cloud puff animation when i dragged it from the devices icon on the left of folders to the spotlight privacy box window.
    Please help. Thank you!

    Hi there,
    did you find out what the problem was or how to re-map the ext. HDD?
    I have the same problem.
    thank you.

  • External hard drive gone wrong and copied everything to Imac HDD filling it completely

    I have had my iMac backed up to an external hard drive for years and randomly the External hard drive is now not readable and it has seemed to copy everything to my imac hard drive filling it completely.
    any ideas how to firstly fix the external drive without losing everything on there and second why it would have copied everything to the Imac?
    I cant even do a restore from a back up as its all backed up to external drive and its saying its not readable.

    If they're still in two folders (iTunes app and Music) on your external, can you not just copy those two back to the internal drive and expect it to work properly again? It's my understanding that music you wish to be active in iTunes must be on your internal drive.

Maybe you are looking for