External hard drive won't appear on my desktop

I'm trying to run a backup, but my hard drive won't appear on my desktop. I see it in Disk Utility, so I know it's there...
...any suggestions?
Thanks,
kevin

Kevin - There might be a few reasons as to why your external drive won't appear have you tried any of these suggestions:-
STEP ONE - Confirm that the drive is being seen by the system
Click the Apple icon and select About This Mac.
Click More Info.
Select the Drives and Volumes tab.
If the Iomega Hard Disk drive is not listed under the USB/FireWire arrow, proceed to STEP THREE.
If the Hard Disk drive is listed, continue with the next step.
STEP TWO - Format the Hard Disk drive to Mac HFS format
The Iomega Hard Disk drive is factory formatted to FAT32 for maximum compatibility. If you have not reformatted the disk or the disk is formatted to FAT32:
The disk may mount very slowly in OS X if the disk is FAT32 formatted.
Mac OS X will not mount any DOS (FAT32) partition larger than 128GB. For more information, please check the Apple® Web site at http://docs.info.apple.com/article.html?artnum=107483
Warning: Erasing your Hard Disk drive will erase all of the information stored on the disk. If possible, back up your data before erasing the hard drive. Mac formatted disks are not cross compatible with other operating systems, such as Windows®, without the purchase of additional third-party software.
Double-click the Mac hard drive icon.
Double-click the Applications folder.
Double-click the Utilities folder.
Double-click the Disk Utilities icon.
Highlight the drive in the left window.
Click the Erase tab.
Select Mac OS Extended.
Click the Erase button and then click Erase from the confirmation window.
If the Hard Disk drive now mounts, you are ready to use the drive.
If the Hard Disk drive does not mount, continue with the next step.
STEP THREE - Are the Mac OS X drivers detecting the drive properly?
The Iomega Hard Drive may not mount if you are using Mac OS X versions under 10.1.3. If you are not using Mac OS X 10.1.3 or higher, please visit the Apple® Web site at http://www.apple.com/macosx/ for information on getting the latest version.

Similar Messages

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Two external hard drive are not appearing on the desktop anymore on my 2008 24" iMac. One is a Lacie d2 Quadra and the other is a G Drive. Both are 1 Tb

Are they daisy chained? Have you tried them one at a time? Have you tried a different FireWire cable? Do they show up in either system profiler or Disk Utility? Have you reset the SMC? http://support.apple.com/kb/HT3964

External Hard Drive won't appear on PC (want cross platform)

I have an external USB Hard Drive. I formatted it using the Disk Utility, OS Format and Journaling. Did a small partition in case I needed a system boot drive. Now my sis needed to backup her laptop (Dell laptop), but the drive won't appear in My Computer, it recognizes there is a USB device on the lower task bar, but no drive anywhere.
Do I have to reformat? what steps do I need to make this USB drive cross-platform friendly?
Paul

Hi, Paul.
You may not want to reformat the drive as FAT-32 since there is a limit on the size of the partition, the maximum file size, and other issues, especially if her Dell's drive is formatted as NTFS (FAT-32 does not support NTFS extended attributes). FAT-32 is unsuitable for backing-up Mac OS X volumes as it cannot preserve the extended attributes (permissions, etc.) employed by Mac OS X.
It's really best if you each have your own external hard drive for backup, as part of implementing a comprehensive Backup and Recovery solution, such as I use and detail in my "Backup and Recovery" FAQ. You also don't want one person inadvertently writing over another person's backups, which could happen if one is not careful. Furthermore, it is often easiest for recovery.
How one handles backup in cross-platform environments is tricky and depends on the native formats employed by the different computers involved, and whether backup will be performed over a network or by directly connecting backup drives to the computers one is backing up.
To enable her Dell to use the Mac-formatted drive, install Mediafour's MacDrive for Windows on the PC. MacDrive for Windows is probably the state-of-the-art application for enabling you to use Mac-formatted disks and hard drives on Windows-based PCs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

External hard drive won't appear on desktop

I just bought a Western Digital passport 250gb external hard drive and when I plug it into my iBook G4 (version OS 10.4.10) it will not appear (via usb 2.0). I tried plugging it into a macbook and it appeared. Any ideas would be very much appreciated.

Welcome to Apple Discussions!
I am not sure just which model drive this is. Does it get its power from the computer? If so, it might be trying to use a bit more power than the iBook can deliver through the USB port. Some USB ports are very marginal and can deliver only the barest minimum of power, which sometimes is not enough for an external device. A powered hub might help.
Good luck!

External hard drive won't appear

I bought a 250GB Formac external hard drive a few years ago and have used it on and off to back up my old G4 powerbook. I purchased my MacBook in March this year and have previously connected it to the Formac drive without any problems. A couple of weeks ago I connected it up and deleted a load of mp3s from the hard drive to make space for some camcorder footage. Yesterday when I connected the hard drive to the MacBook I got the message that the disk I had inserted was not readable by the computer and offered me the choice of eject, ignore or initialise. I have connected the hard drive to my old PB and get the same message. I have been very careful with the external hard drive since I have had it and it hardly moves from it's resting place. I rarely plug it in to the mains except when I want to back up which is less frequent than I would like. The hard drive is making a whirring noise so something seems to be going on in there.
Can anyone suggest anything?

Hi Samir,
I've definitely seen an error message like this before, regrettably it's not a good one to get. The error message usually indicates that there's an issue with the integrity of the drive. This can be a hardware failure of the drive itself (causing the issue) or some sort of partition map corruption on the drive. The fact that it's occurring across multiple machines would further support that theory.
When you plug the drive in and you load Disk Utility, do you see the drive? Does it show the partition? Is it greyed out (indicated that it cannot be mounted)? Does it show something like... disk1s01?

External Hard Drives Won't Stay Open on Desktop

Greetings all! I have a strange little issue to share with the assembled.
I have one Seagate (USB) and two LaCie (FireWire) external drives. Both appear on my MacBook desktop just fine, but that's where things go astray!
Clicking on either of the drives icons leads to the drive opening briefly, then it immediately closes after what looks like a complete finder, or screen, refresh. Both drives are still visible after this rapid little process, but I just can't get the little fellas to remain open on my desktop. I can still access the data when going through an application - e.g. opening Photoshop, then using the open file command to browse and finally open a file.
Both drives have their own power source, and I have used disk utility to confirm that there are no obvious issues with either drive.
Your thoughts are greatly appreciated!

Does the problem exist if you only connect firewire with no USB attached? Or reverse that scenario.

Iomega USB Hard Drive won't appear on my desktop. Please help

Hi, I purchased an Iomega desktop hardrive about 3 months ago and all has been working well.
I had no problems working it with my MacBook Pro and backed up all my files easily. I now need to get some files from my Iomega hard drive, but now when I switch it on nothing appears on the desktop.
I have restarted my Mac and the hard drive several times and still nothing. I even tried using the USB cable that came with my printer in case the cable was faulty, but still nothing.
I have not used the Iomega hard drive for over a month, so am not sure if this may have something to do with it?
Can anyone help me?
Thanks in advance

OK… does the drive appear in Disk Utility else System Profiler? Also, if you are using bus power to run the drive try plugging it into AC. Another possilbility is to place a powered USB hub inbetween the drive and yur MBP as sometime this helps.

WD external hard drive doesn't appear on my Desktop or in Finder

Hi,
I have a Western Digital hard drive connected to my iMac (Intel). When I first intstalled it, it worked fine. Then it began to intermittently exit my desktop, generating the message This Device Was Not Properly Disconnected. If I restarted my computer it would usually return. However now I can't get it to appear on my Desktop at all.
I ran a WD Smartware check of the hard drive which indicated that it is fine. It powers on, the small white light is on, and I can hear and see that it is on. I also tried different data and power cables and ran Disk Utility, which said the WD drive was fine. The hard drive is connected directly to the computer, and to the wall socket, no buses, etc. I tried to download some pictures from my camera and got the error message Camera Window Does Not Recognize Hard Drive. Finally I tried connecting it to my laptop. The hard drive appears perfectly on the laptop and all my info, photos, backups etc, are there.
According to the WD website, if these are the results of the various trials, the problem is with a driver within my Mac OS. The WD drive doesn't have a driver of its own, it uses one that is built into the Mac OS, which WD says must have become corrupted.
I have no idea how to correct this! Does anyone have an idea?? WD says they don't know, only Apple will know.
I have two other older WD hard drives connected to my Mac as well and they work fine. They are different models though.
Thanks for any help!

Well now the two other WD hard drives are beginning to act the same way...

External Hard Drive won't mount on desktop!

Hey, guys.
I ran into a problem this morning that I've never ran into before and I wasn't sure where to write it but I thought this is best.
Here it goes...
Last night I had a power surge and when I restarted my computer, my external hard drive did not mount on my desktop. I than proceeded with restarting my computer, I relinked all my connections and I cant seem to get it fixed. I have a lot of material on my external drive that I dont have backed up (I know, a stupid move) anyways, I dont want to lose that information. Also, when I open up disk utility, the icon for my external drive is there and the partition I made for my external drive shows up also but the title of my partition for my external hard drive is not in bolded font. I tried to click the button to mount my external drive cause the specs tell me that it is not mounted but when I press the mount button, it does nothing. I than tried clicking the unmount button and than restart my computer and still nothing.
What problem am I facing and how can it be fixed?
Thanks.

Dear Jason,
Gary's advised is, IMHO, a very sound one.
The only thing I can think of about your problem, given the information you have provided us, is to run Disk Warrior on your external HD.
In fact, DW is particularly indicated in events, like:
"...you should run DiskWarrior when you suspect that there is directory damage on one of your disks. Directory damage can result in the disk not mounting (not appearing on the desktop when the computer is started), missing files or folders, an inability to move or copy files, or crashes when files are used...".
You could actually buy your copy of DW Licence on-line and download it directly onto your internal HD, starting from this "Information you must read before you make your purchase" page. A hardware copy of the software you have so purchased, will follow by postal service (or currier, if so you choose), shortly.
Follow all the instructions you will find in the download to install the DW software onto your main internal HD and then run it on your external hard drive.
DW has saved my data several times and in similar situations as you are experiencing. IMHO, you should seriously give it a try and, even in the unfortunate event it does not manage to solve your problem, it is one of those Mac OSX utilities which ANY Mac power user MUST have handy at all times.
So, no matter what, my opinion is that it is always well-spent-money those used to purchase your copy of DW: in the long run, you won't regret it.
In the event that even DW is unable to retrive your precious data, my suggestion is to contact Micro Com data recovery. It's going to cost you some money, but if you make a leaving out of the data you've lost on your external hard drive, it's going to be worth it.
All the best.
Costa

External hard drive won't mount, even after disk repair.

My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

Hello maccynicwhoalwayshasmacs,
Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Have a nice day,
Mario

LR 5 my external hard drive no longer appears as a hard drive but as a folder under "Volumes"

I am running LR 5 on a MacBook pro and my external hard drive no longer appears as a hard drive but as a folder under "Volumes". will this affect my ability to search and store in this external hard drive? How can I get it back to normal?

I just started having the same problem, oddly enough with a LaCie 500GB D2 Quadra external. Had it connected via FW800 then suddenly it won't appear in the Finder.
It shows up as an "Unknown Device" in the System Profiler under the FireWire Bus.
I do need the data on it so which solution is easier?
Replace the housing? Or am I better off calling LaCie and using the warrenty?
Thanks,
Shannon

I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine

I have a MacBook Pro, 10.10.2 Yosemite. My external hard drive no longer appears on my screen or in Time Machine. I have gone into Disc Utility to repair disc, and get the message: Error: Partition map check failed because no slices were found. I was trying to follow Melophage's instructions by going into "Terminal" and entering "diskutil list; diskutil cs list; mount" and "diskutil info disk2." Then I entered the command "sudo got show disk1."   I am sure I have made the problem worse. Can you give me some help? Thank you. blelambert
Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *251.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         250.1 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
                                 Logical Volume on disk0s2
                                 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
                                 Unlocked Encrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 TB     disk2
   1:         Microsoft Reserved                         134.2 MB   disk2s1
~ belambert$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
    =========================================================
    Name:         Macintosh HD
Status:       Online
    Size:         250140434432 B (250.1 GB)
    Free Space:   8921088 B (8.9 MB)
    |
    +-< Physical Volume 7EDAFA20-FF9A-45FB-BA44-6526BB46C381
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     250140434432 B (250.1 GB)
    |
    +-> Logical Volume Family B47B0B40-CBF2-4D02-BFEF-182061AC6F8E
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Complete
        Conversion Direction:    -none-
        Has Encrypted Extents:   Yes
        Fully Secure:            Yes
        Passphrase Required:     Yes
        |
        +-> Logical Volume 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
            Disk:                  disk1
            Status:                Online
            Size (Total):          249779191808 B (249.8 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (unlock and decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
~ belambert$ mount
/dev/disk1 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
localhost:/vB3z604U-dvSpES6320fHq on /Volumes/MobileBackups (mtmfs, nosuid, read-only, nobrowse)
~ belambert$ diskutil info disk2
   Device Identifier:        disk2
   Device Node:              /dev/disk2
   Part of Whole:            disk2
   Device / Media Name:      WD My Book 111A Media
File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               2.0 TB (2000365289472 Bytes) (exactly 3906963456 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
belambert ttys000                   Wed Mar 11 17:34 - 17:39 (00:05)
belambert ttys000                   Wed Mar 11 17:33 - 17:34 (00:00)
wtmp begins Sun Mar 8 14:40
~ belambert$ ~ belambert$ diskutil list
-bash: :~: command not found
~ belambert$ /dev/disk0
-bash: /dev/disk0: Permission denied
:~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
~ belambert$    0:      GUID_partition_scheme                        *251.0 GB   disk0
-bash: 0:: command not found
:~ belambert$    1:                        EFI EFI                     209.7 MB   disk0s1
-bash: 1:: command not found
~ belambert$    2:          Apple_CoreStorage                         250.1 GB   disk0s2
-bash: 2:: command not found
~ belambert$    3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
-bash: /dev/disk1: Permission denied
~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
~ belambert$    0:                  Apple_HFS Macintosh HD           *249.8 GB   disk1
-bash: 0:: command not found
~ belambert$                                  Logical Volume on disk0s2
-bash: Logical: command not found
~ belambert$                                  7A998EAE-68FB-4BAC-BF40-7A31D2806B2C
-bash: 7A998EAE-68FB-4BAC-BF40-7A31D2806B2C: command not found
~ belambert$                                  Unlocked Encrypted
-bash: Unlocked: command not found
:~ belambert$ /dev/disk2
-bash: /dev/disk2: Permission denied
~ belambert$    #:                       TYPE NAME                    SIZE       IDENTIFIER
:~ belambert$    0:      GUID_partition_scheme                        *2.0 TB     disk2
-bash: 0:: command not found
~ belambert$    1:         Microsoft Reserved                         134.2 MB   disk2s1
-bash: 1:: command not found
~ belambert$ ~ belambert$ diskutil cs list
-bash: ~: command not found
~ belambert$ CoreStorage logical volume groups (1 found)
-bash: syntax error near unexpected token `('
~ belambert$ |
-bash: syntax error near unexpected token `|'
~ belambert$ +-- Logical Volume Group 883A56F4-5559-4872-A8DA-960F99655B63
-bash: +--: command not found
~ belambert$     =========================================================
-bash: =========================================================: command not found
~ belambert$     Name:         Macintosh HD
-bash: Name:: command not found
~ belambert$
-bash: 3:: command not found
~ belambert$ /dev/disk1
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
:~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
~ belambert$ Last login: Wed Mar 11 19:23:03 on ttys000
~ belambert$ diskutil list
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)

racergirl,
have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this?

When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this? My external hard drive is a FreeAgent GoFlex Drive.

Hi, what Format is the external Drive?
They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html

External hard drive won't appear on my desktop

Similar Messages

Maybe you are looking for