External hard drive won't install, Please Help

I just purchased this same external hard drive, 3/7/2011.  I hooked everything up via my USB, put in the installation CD, got the Drive Set-up window, clicked on Backup Software and got a message "C:\DOCUMEN~1\Owner\LOCALS~1\Temp\pft48F~tmp\" and "Access denied" with the only choice of clicking on "OK"; when I clicked on OK, a small window titled "unpacking backup software" appears in the upper left corner; it got about halfway through, stopped and I got an alert from my McAfee security program that it detected a trojan and removed it. Then 3 gauges appear in the upper left corner and the message "Toshiba Backup Software Installation an error occurred during the move data process of the file REFILERW.SYS!" appears and I click OK again then the Toshiba Drive Setup window appears and a green checkmark is NOT next to Backup Software. However, if I go ahead and click on the other 2 items to install, Drive Monitor Software and Power Save Software, a green checkmark appears next to them. When I then click Exit I get my regular startup screen. The Drive Monitor appears in My Programs but nothing else.  Did Toshiba send me a trojan on their program?
When I checked out my McAfee to see what the name of the trojan was,it says: Artemis!8CBE6FC5C432
I'm not a technophobe and am just lost; I don't know what to do or where to get answers. I emailed Toshiba Tech Support twice but didn't get anything back.
Please, can someone out there help me?

It would be a false positive.  Some antivirus programs look for virus like activity, and that makes them much more prone to errors.
Get rid of McAfee's and switch to Microsoft Security Essentials, it is free and very good.   Security essentials is a very light program, so you will not notice any slow downs when it is running like the bloatware security programs are known for and you will have far fewer false positives.
http://www.microsoft.com/security_essentials/
When I used to manage a PC repair shop, we used to have people come in and pay us to get rid of McAfee's and Nortons on their systems because they would slow the computers down so much, and the false positives were making them miserable when trying to install programs that they knew were safe.
Welcome to the Toshiba user forums.
For those of you who do not know what a user forum is, it is a community of users who volunteer time to help other users. Anyone can participate. It's 100% voluntary.
Being super active is never a requirement

Similar Messages

  • External Hard Drive Read Only. Please Help!

    So I have looked for answers and I can't find one. I need help ASAP cause I have to edit pictures and I have no space.
    Ive read that I have to format my ED but it was working just fine. I don't want to erase none of the backups in there. Theres about 900GB already used.

    Looks like your HD is full. When something is full, the only way to make room is to delete stuff.
      Formatting will wipe it clean by removing everything in it.
    For alternatives, go into the HD and delete stuff selectively you no longer need to make room.
    The only other option is to buy a new HD.
    With that said, I see no indication the drive is failing. Only that it is full.  Unless you know for a fact there should not be enough data in it to have only 88GB left. I don't see anything overtly wrong with it.

  • After installing snow leopard my external hard drive won't show up on screen or backup

    Afer installing leopard my external hard drive won't show up on my desk top.  It also won't backup my hard drive with time machine. I need help.

    Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD.  Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on.  Hope this helps.

  • I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?

    I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?   I had to re-connect my iMovie t

    USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
    OWC have a few different ones for sale.
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
    Do you also connect the external USB drive to the AC power as well while you use it ?
    Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
    Stewie
    Message was edited by: stewiesno1

  • I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

  • External Hard Drive Won't Mount- Need to recover files

    Hello Everyone,
    I am hoping that one of you fine mac experts may be able to assist ~
    Problem: External Seagate FreeAgent Desktop USB external hard drive
    won't mount on desktop=ie: no access to my important files.. Please Help!
    Details:
    External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
    (using for document / file backup-not as a startup disc)
    on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
    ~
    Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
    and got the "beach ball of death" and needed to restart.
    My trusty G3 started up fine, however, the external HD was now
    not showing up on the desktop as normal. I troubleshooted -by restarting,
    trying different a/c plugs/ different USB ports , ran disk utility..called
    seagate -not much help . Seagate said to try the HD on another mac-which I did-
    a G5 tower- same problem.
    ~
    The External hard drive will show up in disk utility, but is grayed out.
    and when click "mount" same two messages keep showing:
    message 1: "a disk attempting to mount as unknown has failed verification or has failed to
    mount.please use disk utility to check the disk"
    ~
    message 2- when unplugging and repluggin the usb in-and upon
    restart:" you have inserted a disk containg no volumes that mac osx
    can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
    ~
    ( I really need access to these files- and do not want to re-initialize the HD!!)
    I ran Disk Utility /first aid "verify & repair , the following info came up:
    Repairing disk "main backup 2007 ".
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid key length ( <<<IN RED )
    Repair completed. "
    ~~
    Though it said the repair was completed, the "invalid key length" issue
    still comes up when re-running disk utility...Hard drive would still not
    mount on desktop-even after restarting .
    ~~~~~
    If there is a mac genius out there that can help?- it would be greatly
    appreciated. I have tried to call seagate several times in the last several hours-
    1st time-they disconnected me after being on hold 10 minutes-2nd call
    I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
    ~~~
    At this point, I am hoping to just get the files and photos off
    the hard drive- I heard about Disk Warrior-should I use that and if so
    what version?
    Thank you very much!
    L

    Will zapping the PRAM be of any use in getting the external to mount on the desktop?
    Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
    Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
    If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
    Have you ever used Disc Warrior and is using it complicated?
    I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
    When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
    Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
    From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
    My other thought was to take the external HD there and have them try to recover the files.
    Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

  • External hard drive won't mount, even after disk repair.

    My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

    Hello maccynicwhoalwayshasmacs,
    Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    USB and FireWire Quick Assist
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • How do I capture tape-based media to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The manual says to import tape footage directly into fcpx, but then I lose my external hard drive.   thanks for your help.

    In FCP X How do I capture tape-based media (hdv clips)- which I want to import-to my external hard drive?  There is only one firewire 800 port on the back of my I mac.  The FCPX manual says to import tape footage directly into final cut, which works, but then I lose  my external hard drive    Do I  have to import it into an event, then copy it over to an external hard drive?  On Larry Jordan's tutorial, he has 3 external hard drives that show up on his monitor WHILE he imports his tape based media.  How is that done?  I can only get either the camera to appear OR my external hard drive.   thanks for your help.

    Thanks for your response, but that doesn't solve the problem.  Yes, the LaCie hard drive has 2 firewire ports-
    I have always done what you suggest (works fine in FCP7), but in FCPX when I do that the camcorder icon
    does not appear.  It only shows up when I DIRECTLY import the footage via firewire.  ????

  • External hard drive won't shut down after switch from OS10.5 to OS10.4.11

    i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
    can anyone suggest how i can get it to do this again?
    i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
    thanks

    Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
    This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
    -mj
    [email protected]

  • External hard drive won't unmount for disk utility.

    Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

  • My Toshiba external hard drive won't mount after OSX Mavericks update. Please help.

    Two days ago I updated to Mavericks 10.9.3 and prior to this, my Toshiba 1TB external hard drive worked perfectly well. Since the update, my hard drive will no longer mount. It shows up in Disk Utility but will not let me 'mount', 'verify disk' or 'repair disk' through Disk Utility. My sister has an identical Macbook Pro which she has not updated to Mavericks. I have tested my hard drive on her laptop and it works just fine. Can anyone tell me how to fix this? Do I need to reformat my hard drive (and if so, will that clear everything on my hard drive?) or is there a simple fix?
    Thank you for any assistance you can offer!

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • My external hard drive won't show up on my macbook air, and my iPhone when connected won't show up as connected in iTunes, help

    When I connect my external hard drive to my MB Air it is to recognizing it. It did 2 days ago and it is compatible I have been using it for a month now. Also when I connect my iPhone 6 to it, it won't show up in iTunes anymore......please help

    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Boot into Recovery and launch Disk Utility. Is the drive recognized?
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • External hard drives won't mount after upgrading to Tiger 10.4.9. Help!

    Hi, I've just got the latest iMac. Very excited! I did all the software updates, connected my Western Digital extended hard drive so that I could copy some files over onto my new Mac. It was fine at first. Then when I wanted to open up the external hard drive icon on my desktop again and double clicked on it, everything disappeared from the screen for a few seconds, then reappeared but my external hard drive simply opened the window to my personal hard drive on the Mac. The WD links to my computer via Firewire. I then connected my USB external hard drive stick and it was the same story.
    I used Disk Utility to test everything and everything was fine.
    I then reinstalled Mac OSX 10.4.8 and plugged in my external hard drives. Everything worked perfectly. After copying over documents and a couple of programs, and downloading a few more programs, I ran my software updates again, upgrading the operating system to Tiger 10.4.9. I attached my external hard drive and it was the same problem all over again.
    I the read up the online discussions and also chatted to an Apple dealer, and their advice was to download the Intel Combo and reinstall the operating system. I have just done this and my external hard drives will still not mount properly. Their icons appear on screen but double click them and everything disappears.
    Please help. This is really frustrating as I have a backlog of work to do and I seem to be wasting hours on this. Not only that, this is a brand new machine which I rightly expect to work straight away.
    I look forward to your response. Thank you in advance.

    Hi, try to put your HDD in other Mac and look if appear the same, also you can try to repair permission.

  • External hard drive not recognized... help please.

    okay, well here is the story:
    my iBook G4 had its stock 30gb hard drive in it and it was running extremely low on space. so i figured i didn't want to carry around an external hard drive, therefore i would buy an internal hard drive an install it. so i purchased a new 2.5" 80gb hard drive and called up the local apple store. they told me that although it was under warranty, that it did not cover hard drive installation. so i looked it up online and found step by step instructions to install the hard drive. so after lots of hard work and many screws, i installed the new hard drive successfully... but i still had this perfect 30gb hard drive. i thought maybe to save a few bucks i could turn it into a usb external hard drive. i found an enclosure for the hard drive and a usb 2.0 cable and plugged it into my ibook. it was recognized and everything. i put some files on the external hard drive and transferred it to another mac. this is where the trouble started. i plugged the hard drive into a PowerMac G4, and it was not recognized... so i tried it on a different mac. this time on a PowerBook G4, but no luck. this issue has been troubling me for a few weeks. but then i tried it on a similar iBook G4... and it was recognized. but i don't know why it was only recognized only on the iBook G4 (not the same iBook G4 it was pulled out of) and no other macs.
    does anybody have any ideas what we can do to get this hard drive to be recognized by other macs?
    any of even the smallest ideas would be greatly appreciated.
    thanks,
    tyler
    iBook G4   Mac OS X (10.4.3)  

    I can walk you through formatting the hard drive:
    1. Hook it up to an iBook that recognizes it.
    2. Go into your Applications folder, then scroll down to Utilities. Open Utilities and scroll down a bit and you should see Disk Utility. Double-click.
    3. On the left side you should see your internal hard drive and your external one. Each hard drive will have a sub-catagory with the partition indented.
    4. Your external hard drive will probably be the second catagory. Click it.
    5. In the center-top you should see the tabs First Aid, Erase, Partition, RAID, and Restore. Click the Erase tab.
    6. You should see Volume Format: and then a drop down menu, and Name: and a text box. Type in the name you want the external hard drive to be named.
    7. In the drop down menu, select Mac OS Extended (Journaled).
    8. Then, simply click Erase, watch the progress and it should be good to go!!
    Hope I helped you out. Oh, and it might be the enclosure...and also what OS's? Since it's USB it is probably using a USB Mass Storage driver. Mac-wise, if formatting doesn't help, I would get a FireWire enclosure because FireWire is much faster than just USB 2.0. Oh, thats nother thing...Is the enclosure Hi-Speed USB? If it isn't, I would definitely get a FireWire one...If it is, the PowerMac G4 doesn't have Hi-Speed so you're not taking full advantage..Just some insight
    iBook G4   Mac OS X (10.4.3)   512 MB Ram, CD-RW Combo Drive, 40 Gig HD, bought in October of 2005...
    Message was edited by: Hilary_Rose

  • HELP! External hard drive won't show up in finder!

    Last night, I was updating my macbook (from August 2008, still runs on leopard) and it needed to restart. I forgot to eject my LaCie Porsche 1tb external hard drive first and, when it rebooted, I got the error of death (aka "disk was not ejected..."). When connected to the USB port, the drive lights up, I can hear it spinning, but it won't show up in finder and I can't see it in Disk Utility to repair it (after the first error of death, the computer wouldn't even acknowledge that I had the drive plugged in). I've tried plugging it into the different USB ports and even on a different macbook, but no luck in getting the computer to recognize it long enough to use Disk Utility or DiskWarrior. Any tips on how I can get my macbook to read the drive again?

    If the external hard drive is not showing up in Disk Utility when connected to two or more different computers, then the problem is with the hard drive, it is broken. Get a new one.

Maybe you are looking for