External Hard Drive won't read/mount sometimes..

hello,
i have an external 320GB Seagate HD i mainly use for music. i installed macfuse and ntfs-3g on my mac so i am able to use it on a pc as well. when i turn on my hard drive, it either works properly, i get nothing-like no mount/read on my desktop-, or i get this message from turning it off:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/Seagate 300GB SATA beacuse the
following problem occurred:
ntfsattr_preadi: ntfs_pread failed: Input/output
error
Failed to read NTFS $Bitmap: Input/output error
NTFS is either inconsistent, or there is a hardware
fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of
the /f parameter is very
important! If the device is a SoftRAID/FakeRAID
then first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see
the 'dmraid' documentation
for more details.
with the options of 'cancel' or 'ok'
And when it does work properly, as i am playing my music it will stop and 'think' and then a window would pop up and say:
Seagate 320GB SATA
There was a timeout waiting for the file system to respond. You can eject this volume immediately, but unsaved changes may be lost.
and will have the options of:
Don't Warn Again
Force Eject
Keep Trying
in the end i would have to force eject because 'Keep Trying' wouldn't work.
Any ideas?
Message was edited by: chadwicked

If the hard drive needs to be +read and write+ on both a Mac and Windows PC, it needs to be formatted as FAT32, aka +MS-DOS (FAT)+ in Disk Utility.
If the drive was formatted for Mac, you may have caused data corruption in some way when you connected it to the Windows PC. You said
apparently I did something I shouldn't have?
so it depends on what that "something" you did was.
When you connect it to the Mac now, the drive's volume does not show up in Finder, correct? But if you run Disk Utility, does the drive appear in the Disk Utility sidebar? If so, is there a volume indented under the drive (in the sidebar)? If so, can you select the volume (which may be grayed out) and click the Mount button to mount it? If so, the volume may become accessible through Finder.
If the drive appears, but there is no volume that you can mount, select the drive and go to the +First Aid+ tab. Click on the +Repair Disk+ button. Note if any errors are reported, and if there are errors, if Disk Utility was able to repair them.

Similar Messages

External Hard drive won't read on iMac

I recently got a new pc and I was using an external hard drive to transfer the files that I wanted from my mac to my pc. I put all the files on that I needed and when I went to copy them to my pc, apparently I did something I shouldn't have? I need to format the drive to use it on my PC, but now when I reattach the Hard Drive to my mac, it is now unable to be read. I would just format it and erase everything but all of my brother's files are stored in it. Is there any way I can view these files on my mac again?

If the hard drive needs to be +read and write+ on both a Mac and Windows PC, it needs to be formatted as FAT32, aka +MS-DOS (FAT)+ in Disk Utility.
If the drive was formatted for Mac, you may have caused data corruption in some way when you connected it to the Windows PC. You said
apparently I did something I shouldn't have?
so it depends on what that "something" you did was.
When you connect it to the Mac now, the drive's volume does not show up in Finder, correct? But if you run Disk Utility, does the drive appear in the Disk Utility sidebar? If so, is there a volume indented under the drive (in the sidebar)? If so, can you select the volume (which may be grayed out) and click the Mount button to mount it? If so, the volume may become accessible through Finder.
If the drive appears, but there is no volume that you can mount, select the drive and go to the +First Aid+ tab. Click on the +Repair Disk+ button. Note if any errors are reported, and if there are errors, if Disk Utility was able to repair them.

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

External hard drive won't mount, even after disk repair.

My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

Hello maccynicwhoalwayshasmacs,
Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Have a nice day,
Mario

External hard drives won't mount after upgrading to Tiger 10.4.9. Help!

Hi, I've just got the latest iMac. Very excited! I did all the software updates, connected my Western Digital extended hard drive so that I could copy some files over onto my new Mac. It was fine at first. Then when I wanted to open up the external hard drive icon on my desktop again and double clicked on it, everything disappeared from the screen for a few seconds, then reappeared but my external hard drive simply opened the window to my personal hard drive on the Mac. The WD links to my computer via Firewire. I then connected my USB external hard drive stick and it was the same story.
I used Disk Utility to test everything and everything was fine.
I then reinstalled Mac OSX 10.4.8 and plugged in my external hard drives. Everything worked perfectly. After copying over documents and a couple of programs, and downloading a few more programs, I ran my software updates again, upgrading the operating system to Tiger 10.4.9. I attached my external hard drive and it was the same problem all over again.
I the read up the online discussions and also chatted to an Apple dealer, and their advice was to download the Intel Combo and reinstall the operating system. I have just done this and my external hard drives will still not mount properly. Their icons appear on screen but double click them and everything disappears.
Please help. This is really frustrating as I have a backlog of work to do and I seem to be wasting hours on this. Not only that, this is a brand new machine which I rightly expect to work straight away.
I look forward to your response. Thank you in advance.

Hi, try to put your HDD in other Mac and look if appear the same, also you can try to repair permission.

WD external hard drive won't mount

Hello,
I have a WD my passport 1TB external hard drive that will not mount. It has two partitions, one is a time machine backup, the other contains critical files. I thought I was backing up this second partition via SuperDuper, but for other reasons it stopped doing it's backup two years ago, so I now have two years worth of critical files that are seemingly inaccessible (my bad). I have done all the easy stuff like try it on other computers, changed cables, changed ports, tried it on PCs and Macs (I have a 2008 MBP). I have also taken it out of it's case, and even switched out the PCB with an exact copy (through PCB Solutions in Canada). Not long after I replaced the board, I got access again to the hard drive (though not right away), I began copying files as fast as possible (which was slow) and got about 25% (51GB) of the drive copied (less corrupt files). This took a couple days.
Then I stupidly shut down the computer as the drive seemed to be getting hot and I thought it worth the risk not to fry the board/drive. Alas, the hard drive would not mount again. I have tried to access it through the Terminal, as it does show up there (after a couple minutes) if I do a diskutil list like this:
Melissa-McManuss-MacBook-Pro:~ melissa$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *512.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Melissa's SSD           511.1 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                                                   *1.0 TB     disk1
It does not show up in Disk Utility or Finder however.
It will show up in Disk Utility after the Finder gives up on trying to mount it. It shows up as "1TB WD My Passport 0171D Media", but does not show the partitions.
I have read other similar cases, I can tell you that the fsck. program does not show up in the Activity Monitor. So this is not my problem.
I am out of potential remedies, but am loathe to send it to the Data Recovery people if not absolutely necessary (for obvious reasons).
Thank you in advance for any potential help!

Your best bet is DiskWarrior,...
http://www.alsoft.com/DiskWarrior/
Hold option key or alt key when selecting when choosing Rebuild, then use Scavenge, that may make a temporary directory that can then be used for copying the files.
If DW doesn't even see it or work, then...
Data Rescue...
http://www.prosofteng.com/products/data_rescue.php
rccharles on file recovery...
"Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
They have a trial version, so I guess you can see if your data can be recovered...
http://www.stellarinfo.com/mac-data-recovery.htm
FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume. FileSalvage is designed to restore files that have:
    * been accidentally deleted.
    * become unreadable due to media faults.
    * been stored on a drive before it was re-initialized/formatted.
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
http://discussions.apple.com/thread.jspa?messageID=11073082#11073082

External hard drive suddenly become read only

For those who have been using an external hard drive on OS X (using NTFS file system) without any problem and suddenly one day the system has started mounting it as a read only file system, this is because the file system right now has some inconsistences.
As it happened last night to me i started googling for a quick solution to solve the problem. But i didnt find anything out there. At least at first glance. So then i checked the system logs of the system in order to get some sort of specific information about why that was happening (in OS you have an application that makes so easy to have a look through the system logs and its in /applications/utilities/console.app). In my case, and i repeat, IN MY CASE, the problem was the following:
21/07/11 18:59:02 kernel NTFS-fs warning (device /dev/disk1s1, pid 2140): ntfs_system_inodes_get(): $MFTMirr does not match $MFT. Will not be able to remount read-write. Run ntfsfix and/or chkdsk.
So afterwards once known the problem, was as easy as to mount the external HD in windows and execute the command chkdsk /f (google about the usage of the tool if dont know how it works).
Alternatively, you have the Linux option using the ntfsfix command, but you will need to install the program before that (if dont have it previously in your system) or otherwise you won't be able to use it (sudo apt-get install ntfsprogs)
Hope it helps.
Marc

I got an error message that my External Hard Drive was now 'read only'. Having scoured the various forums looking for clues as to why it had happened I found numerous suggestions, all of which seemed overly complicated and beyond my basic understanding (I'm old enough to remember when Macs 'just worked').
Anyway, among the suggestions on how to correct this I found what seemed like an overly simplified one - 'Don't switch on your external hard drive until after you've booted up'. Since I tend to leave mine on all the time, I immediately turned it off and back on again and ran Time Machine in hope rather than expectation. Would you believe it? It backed up as normal first time. Hope it works for anyone else having the same problem.

External hard drive won't shut down after switch from OS10.5 to OS10.4.11

i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
can anyone suggest how i can get it to do this again?
i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
thanks

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

External hard drive won't unmount for disk utility.

Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write

Hello, All,
I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write without reformatting it ?

Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks,

External Hard Drive won't mount - tried Disk Warrior, am backing up as a .dmg...will this work?

Hi Guys,
Hopefully someone can help! Fairly desperate situation here...
I backed up around 700GB of data to an Iomega external hard drive (supplied by the client), using my Macbook Pro...all was fine when I unmounted the drive at the end of the backup.
The client took the drive away and called me to say he mounted the drive in Windows (on a PC), and he was able to work with the files for a time, but now the drive won't mount...
I collected the drive, hooked it up to my Mac Pro, but OSX tells me it can't mount the drive. It shows up in Disk Utility in the sidebar, but not on the desktop...
I tried repairing the disk using Disk Utility and with Disk Warrior, both tell me the disk cannot be repaired...
I am currently making a backup of the drive as a .dmg file, using a program called Disk Drill...it's slow as I expected, but I'm still not sure the .dmg will mount...because surely it's just making a copy of the data exactly, of which some part is not mounting (a mount directory or something???)
Is there any way you guys can think of me somehow taking the data and backing it up onto another disk?
Specialist recovery services seem to think there shouldn't be any problem recovering the data, and of couse, as a costly last resort, that's what I'll have to do, but does anyone know how they may go about doing it? It is something vastly complicated such as a command line thing?
Sorry about the length of this question...just hope someone can help!
Thanks in advance...

You didn't say what format (filesystem type) the disk was.
However, I'd say your analysis is probably correct. Something has corrupted the disk. You can make a disk image copy to the .dmg which will preserve the data, such as it is, but I doubt extremely if it will fix any file system corruption.
Furthermore, if both Disk Utility and Disk Warrior have said the disk is unreadable I'm dubious that anything else will magically repair it and that recovery probably consists of snuffling through the disk block by block.
However if the filesystem is FAT (Windows) there may be other (Windows) utilities that can fix it.
You said you 'backed up the data'. Does that mean you still have the original data on your MBP? Are you trying to recover the client's changes?

External Hard Drive won't mount on desktop!

Hey, guys.
I ran into a problem this morning that I've never ran into before and I wasn't sure where to write it but I thought this is best.
Here it goes...
Last night I had a power surge and when I restarted my computer, my external hard drive did not mount on my desktop. I than proceeded with restarting my computer, I relinked all my connections and I cant seem to get it fixed. I have a lot of material on my external drive that I dont have backed up (I know, a stupid move) anyways, I dont want to lose that information. Also, when I open up disk utility, the icon for my external drive is there and the partition I made for my external drive shows up also but the title of my partition for my external hard drive is not in bolded font. I tried to click the button to mount my external drive cause the specs tell me that it is not mounted but when I press the mount button, it does nothing. I than tried clicking the unmount button and than restart my computer and still nothing.
What problem am I facing and how can it be fixed?
Thanks.

Dear Jason,
Gary's advised is, IMHO, a very sound one.
The only thing I can think of about your problem, given the information you have provided us, is to run Disk Warrior on your external HD.
In fact, DW is particularly indicated in events, like:
"...you should run DiskWarrior when you suspect that there is directory damage on one of your disks. Directory damage can result in the disk not mounting (not appearing on the desktop when the computer is started), missing files or folders, an inability to move or copy files, or crashes when files are used...".
You could actually buy your copy of DW Licence on-line and download it directly onto your internal HD, starting from this "Information you must read before you make your purchase" page. A hardware copy of the software you have so purchased, will follow by postal service (or currier, if so you choose), shortly.
Follow all the instructions you will find in the download to install the DW software onto your main internal HD and then run it on your external hard drive.
DW has saved my data several times and in similar situations as you are experiencing. IMHO, you should seriously give it a try and, even in the unfortunate event it does not manage to solve your problem, it is one of those Mac OSX utilities which ANY Mac power user MUST have handy at all times.
So, no matter what, my opinion is that it is always well-spent-money those used to purchase your copy of DW: in the long run, you won't regret it.
In the event that even DW is unable to retrive your precious data, my suggestion is to contact Micro Com data recovery. It's going to cost you some money, but if you make a leaving out of the data you've lost on your external hard drive, it's going to be worth it.
All the best.
Costa

10.8.5 external hard drive won't mount

After installing 10.8.5 update my Seagate external hard drive that I use as my Time Machine backup won't mount. I can see it in Disk Utility, but it refuses to mount.
Anyone else? Suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

External Hard Drive won't read/mount sometimes..

Similar Messages

Maybe you are looking for