External hard drive won't shut down after switch from OS10.5 to OS10.4.11

i recently chanded my OS from 10.5 to 10.4.11 (as a programme i want to use is not compatible with leopard), but since i have done this my external hard-drive won't shut down automatically when i shut down my mac. i have to switch it off at the plug instead.
can anyone suggest how i can get it to do this again?
i'm a little concerned that i'm damaging the external drive by turning it off manually all the time..
thanks

Some hard drives shut off with shutdown, some don't. Sometimes hard drives that did shut off with one system will not do the same with a different system. My hard drives which did shut off, prior to 10.5 now stay on.
This is not really a problem as all hard drives spin down after 10- 20 minutes when not in use, whether your computer is on or off. Leaving the drive on is fine, shutting it off manually is fine.
-mj
[email protected]

Similar Messages

External Hard Drive won't shut down

New MacBook Pro 15" and Tiger my Lacie external hard drive does not turn off when the computer is shut down.
MacBook Pro 15" Mac OS X (10.4.9)

You need to provide more information about the drive. Is it bus powered or AC powered? If it's bus powered, you should probably contact LaCie support and ask them. If it's AC powered, then naturally you'd need to shut it off separtely.

External hard drive does not shut down

Hello, When my mini mac goes to sleep my samsung external hard drive does not shut down or dismount properly. when i wake computer i have a error message stating improperly ejected hard drive. It also does not reconize HD until I disconnect and reconnet??? PLEASE HELP Thank you

My Mini was doing the same thing until I reset the PRAM. With four external drives. They would stop inadvertently with an "improperly ejected" error. Granted two of the drives went bad (6 and 7 years old) but a brand spanking new Seagate and a 3 year old Hitachi drive doing the same. Haven't seen the error since resetting the PRAM.
If you don't know how to do that, Reboot while holding the Cmd+Opt+P+R keys until your hear the startup chime three times and then release the keys.

External hard drive won't mount, even after disk repair.

My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

Hello maccynicwhoalwayshasmacs,
Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
USB and FireWire Quick Assist
Thanks for using Apple Support Communities.
Have a nice day,
Mario

In Yosemite: External Hard Drives Won't Spin Down

Since installing Yosemite, my external (and perhaps internal) drives won't spin down in energy saver mode: 'Put hard drives to sleep when possible.' I'm using Seagate Barracuda 2TB internal drives in external Voyager Q drive bays. They seem to be getting a little too warm, I can also feel them spinning.
Thanks!
Steve

Thanks for those diagnostics & remedies. Those are good to know. Performed all of them but the problem persisted. I tried swapping out different drives and discovered that it was one particular Seagate drive that wasn't spinning down. So that was the culprit. Going to check out the Seagate discussions here or on Seagate and see what can be done, probably nothing.
Thanks much!
Steve

External Hard Drive won't play music after upgrade

I have all my music and iTunes on an external hard drive and it worked great unitl I upgraded to iTunes 10. Now it says it can't play the music because it is from an earlier version of iTunes. PLEASE HELP!!

Same here, but I can play everything that I own, but can't play rentals. I think that is the reason because it is on an external hard drive. iTunes is to big for my MBP hard drive. Not sure what the problem is.

External hard drive doesn't shut down

I just switched to an iMac from a G5. I have external firewire drives attached via a daisy chain. They do not shut off automatically when I turn the computer off. They did shut down when connected to the G5... they were not daisy chained to the G5, but I am not sure that makes a difference. Is there something I can do to make them shut off automatically? Thanks.

I have the same problem!
I used my iomega hdd on my old g3 imac - via firewire from the drive direct to the mac. When i put the imac to sleep, the drive stopped spinning and then i pressed the power button on the drive to turn off. It would then start up automatically when i woke up the mac.
I now have the drive plugged into my sparkling 24inch intel imac - once again directly by firewire from the drive to the mac - but when i put the mac to sleep the drive is still wide awake and will not even let me turn it off using the power button on the drive. I cant leave it on as the fans kick in and makes such a noise - i can hear it in my bedroom next door!
ive tried connecting by usb also but same issue. I've searched the iomega site with no results. is this an 'intel' issue? grrr

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

External hard drive won't unmount for disk utility.

Im not sure if this is the right topic area but I have a white macbook and my external hard drive won't unmount. I want to erase it via disk utility but it keeps telling me other programs are using it.

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

My Mac 10.7.5 won't shut down after new software (security update 2013-003) installation-- hangs at grey screen with "software update" at top. It also intermittently goes to sleep without my asking. What to do?

My Mac 10.7.5 won't shut down after a new software installation (Security Update 2013-003). It just hangs at a grey screen with "Software Update" at the top. I have to force quit, then restart-- but the new software hasn't installed.
My Mac also intermittently goes into Sleep mode, repeatedly, unprompted by me. I suspect a connection between these two problems.
I have tried deleting the /Library/Updates folder. It hasn't helped. The update still won't install, and my Mac won't shut down without my forcing the quit.
Help please!

Hi, I've just come accross the same problem... did you manage to get a resolution??
Cheers, Chris.

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

Coastal,
Frank gave you the exact answer to your question.
However, I would like to ask if you are indeed asking the right question. Do you really want different libraries? The implications are that you have to "switch" libraries to see what's in the others, and so that your searches don't work across all of your pictures? If so, then you asked the right question. If not, you may be more interested in relocating your masters to multiple hard drives so your library gets smaller, instead of breaking up the library.
nathan

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS without formatting it so that I can use it for Time Machine and the like?

There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

I deleted all the music from my itunes library because I thought I had it backed up on an external hard drive. Can I restore the library from my ipod touch?

I deleted all the music from my itunes library because I mistakenly thought I had it backed up on an external hard drive. Can I restore the library from my ipod touch?

Maybe here:
iCloud: Troubleshooting creating backups

External hard drive won't shut down after switch from OS10.5 to OS10.4.11

Similar Messages

Maybe you are looking for