External hard drives and Error Code -36

Just wanted to know if anyone knows what this error code means. I tried copying a bunch of video files about 600-700 mb to my USB external hard drive, and this error message popped up and said the disk could not be read or written to. I contacted the manufacturer of the hard drive and they said it was not a manufacturing fault, but an issue regarding the operating system.
Does anyone know why this might be? And also, does anyone know of anyway to get around it?
Thanks.

You can try DiskWarrior to repair the directory. If DW can't do it, you'll need to re-format the drive. I'd also suggest a zero out erase.
Steps for zeroing the drive Disk Utility:
1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear.
2. Once started up from CD or DVD, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)

Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3. Choose the entire disk (top icon).
4. Choose erase tab.
5. Click on "Security Options"
6. Choose "write zeros".
7. Erase
This will take a bit of time because the computer is physically writing zeros to each block.

Similar Messages

  • Can't see external hard drive after error code -36

    Hi, was copying iphoto data from an WD My Passport 750GB external hard drive to my MACBook when the system said it could not complete the copy as it had encountered a problem and indicated error code -36.  Now I can't see the external drive (or any data) on any computer.  I have tried 3 different MACs to no avail.  The drive makes a soft beeping noise but then stops but the light stays on.
    Any ideas on how I can get access to my data??

    Make sure the cable is securely seated on the device side.
    If that's not the problem, then either the drive mechanism or the enclosure has failed. If you don't have backups, you'd better hope it's the latter. Remove the mechanism from the enclosure and install it another enclosure. You can buy fairly inexpensive USB docks that a SATA drive drops into with no need for disassembly.
    Failing that, your only chance is to send the drive to a recovery service such as Drive Savers. They disassemble the drive mechanism in a clean room and mount the platters in another drive. Cost will be in the 4-5 figure range, and the results are uncertain.
    If you don't have backups, you don't have data.

  • External hard drive and errors - 'iTunesMiniPlayer.Resources'

    Hi there,
    I've got my music installed on an external hard drive. When I got a new iPod for Christmas, and had to start using another computer, I put all of my music onto this external hard drive. When I installed the program, I also installed it on the external hard drive. I'm thinking this may have been one of the reasons, but I'm not sure.
    Here's an error message I've been getting from the beginning-
    'iTunesMiniPlayer.Resources' is not a valid short file name
    Fatal error during installation
    It's also told me I should reinstall, but I've tried, and with no success. I'm running off of WINDOWS XP. I've also tried to repair via the program install AND in the control panel, with no success. Tried to uninstall via the control panel, again, no success.
    My external drive is labeled E, but I didn't choose that, it's kinda how it comes up automatically.
    BNoir, or one of the magical geniuses out there in iTunes land, can you give me some tips? I have a hard enough time opening it regularly, but today I tried to add music that I have on CD, and it won't even recognize it.
    Another error message comes up about reinstalling iTunes so that it can get CD information from the internet.
    Cheers, and thanks,
    ~ Josette ~

    Solved the problem. My external HD is a WD (My Book Studio). I needed to install updated driver manager and this fixed it:
    http://support.wd.com/product/download.asp?groupid=114&sid=62&lang=en
    If you have a WD external HD goto the above link and search for your model and a list of updates will be shown, Yay!!

  • External hard drive displays error code 22

    My Seagate GoFlex external hard drive displays code 22 when I try to initialize it to active status...what is code 22 ?

    You should really contact the vendor about this. Try the Seagate Forum. This is not a ConfigMgr issue.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • I deleted my back up files from my external hard drive and my trash won't empty. I get an error code -22. Can anyone tell me how to fix this?

    I deleted my back up files from my external hard drive and my trash won't empty. I get an error code -22. Can anyone tell me how to fix this?

    JLCruz wrote:
    I deleted my back up files from my external hard drive ...
    If this is related to Time Machine Backups...
    See here  >  Should I delete old backups?  If so, How?
    From Here  >  http://pondini.org/TM/FAQ.html
    If the TRASH still won’t Empty...
    See Here  >  http://pondini.org/TM/E6.html

  • Why  will photoshop not open after loading it to new iMac computer from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

    Why will Photoshop CS4 not open after loading to new iMac from an external hard drive and I get this message: Licensing for this product has stopped working:error code: 150:30

    A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
    The answer is easy: Reinstall CS4 from your disc. and apply all updates.
    Gene

  • I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

    I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
    Thanks! 

    I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

  • I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    Hello Drake, I suspect one or more of the Drives needs repairing, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • Lion External Hard Drive (and flash drive) problem

    I recently installed Mac OS X Lion on my Macbook Pro. I plugged in my external hard drive and my computer recognized the HD and even let me access files on it. However, when I tried to copy a movie onto it, it gave me an error: "The operation can’t be completed because an unexpected error occurred (error code -8003)." I decided to try a different file, the same thing happenned. I tried a USB flash drive and the same thing happenned. I checked the permissions for them and it says "you can read and write" so everything is fine there. If it helps the HD is formatted as "MS-DOS (FAT32)" and the USB stick is "MS-DOS (FAT16)".
    I don't really know what to do because I have never had this problem on the same computer with Snow Leopard in the past (the only time I did was when the file was too big to copy onto it because of the formatting or something but it definetely isn't the case now).
    PLEASE HELP!

    There might be a bug in the driver of the FAT-32 files systems. That is the likely cause, resolution, go for any free FAT-32 filesystem driver for mac. There is very less security feaures in FAT-32, and I am sure that the security messsagae is a red herring.
    What you can possibly do is a unmount, and then a remount, manually.
    [http://groups.google.com/group/comp.sys.mac/browse_thread/thread/875f76b02ae664c 5/5ec5b8769922a29f?pli=1]
    Please keep us posted. Sorry that you are disappointed. A leap is a leap is a leap, which always requires struggling... don't worry, it would fall in place.

  • Backing up images on external hard drive and restoring to new internal driv

    I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

    The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
    If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
    RB

  • How do I back up my itunes to an external hard drive and restore from same if necessary

    How do I back up my entire itunes to an external hard drive and restore from same if necessary.
    Thanks

    This is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
    I do not use a Windows machine, have a Windows Vista Dell I rarely startup now.  But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
    I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go.

  • Can I put my library on an external hard drive and use it between two computers?

    Can I put my library on an external hard drive and use it between two computers? I have two MBP; I will refer to one as computer A and to the other as computer B. I would like to be able to plug in my external hard drive, boot up iTunes, and if there were any changes made to the library previous to its last time accessed on this compluter, they show up on that computer, regardless of being imported on the other.
    A hypothetical example: I import three albums called 1, 2, and 3 on computer A over a week or so. I take the external hard drive and plug it into computer B. The entire library which was visible on A, is visible on B, including albums 1, 2, and 3.
    Is this possible? If so, what files need to be copied onto the external? I'm trying some different combinations, trial and error basically. Hopefully someone knows and can answer before I mess up my library. I also want to do this to free up space on my computer. All importing will be done from disc.

    iTunes/Preferences/Advanced : point your iTunes to the new location of the Library.
    Set "Share on local network" in the Sharing tab, and you or everyone on the local network can play your music.
    You make a backup first of the Library.
    Move the follwing to the new location:
    /Users/your username/Music/iTunes/iTunes Music
    have fun.

  • How do I save just my photos to an external hard drive and still access them in iphoto

    I have a lot of photos that take up space on my hard drive. It is now full and I need to continue to use them but i need to load new photo also. How do i save the old photos onto an external hard drive and then still access them in iphoto?

    This is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
    I do not use a Windows machine, have a Windows Vista Dell I rarely startup now.  But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
    I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go.

  • Backing up photos on iMac using external hard drive and time machine

    How do i back up photos from my imac using an external hard drive and time machine
    Thanks in advance

    Apple explains how to use Time Machine in http://support.apple.com/kb/ht1427.
    Setting up and using TM is very simple to do, connect any external HD (format as Mac OS Extended (Journaled) using Disk Utility ) and your computer shoudl ask if you want to use that EHD for a Time Machine backup. If you have any questions visit your local Apple Store or reseller and they can answer how to setup and use TM and also should be able to offer suggestions on EHDs. My personal preference is OWC (www.macsales.com) Mercury Elite Pro due to the build quality and OWC's level of support.

  • I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted

    I have itunes directory on an external hard drive and want to direct a new installation of itunes on windows 8 to use it. I tried holding down ctrl and clicking itunes and after many tries got it to work one time. When I went back in later it had reverted back to a blank version of itunes and I cant get ctrl to work again. Any other ideas?

    This is sometimes caused by a problem with the iTunesPrefs.xml file, normally found at C:\Users\<User>\AppData\Local\Apple Computer\iTunes\iTunesPrefs.xml. Try dragging this to the desktop and trying again.
    Alternatively the problem may be that you have McAfee AV and it is preventing iTunes from updating the same file and thus causing the problem. See Why does iTunes delete my itunesprefs.xml? for details.
    tt2

Maybe you are looking for