External hard drives not going to sleep

External HDs (I have two) connected to my 2.26 unibody macbook are not going to sleep even though I have the appropriate check box selected in System Prefs. Running 10.6.8. Connected through the USB ports in my 23" cinema display. Any thoughts or suggestions?

Lion may not be able to put them to sleep (as it can internal drives). The drives often come with drive management software to do that (check that it is Mac OS compatible). I have two Segate drives that backup my server and then sleep, but that is managed by the managment software.
DB

Similar Messages

Hard drive not going to sleep

I have six external hard drives but since loading Maverick two of them won't 'go to sleep' at night. I never had a problem before.

I'm running FCP 5.0.4 on both machines. This is a re-render, and everything has rendered fine, several times, previously. So it's not an issue with a specific piece of media. This is the only sequence I've encountered the problem with, but I've rendered the same sequence previously without problems. Also, to be clear, I get the same issue if I render part of the sequence using the in/out points. I can finish very small renders, but anything lasting more than 10 minutes or so freezes up.
Unfortunately, I can't render to my start up drive. It looks like I'll be able to finish the render to the external disc from the desktop, but I'd like to figure out what's wrong with the Macbook Pro.
Thanks for your assistance, Michael.

External hard drive not mounting

external hard drive not mounting

I fixed mine by uninstalling the software that came with the harddrive such as Tuxera and reinstalled it now myharddrive works again and i did not have to delete the harddrive and reformat it.
I tried a lot like reseting the Pram And connecting other harddrives but by unstalling the original software it works all over again. I hope this works for you because i was getting pretty frustrated myself.
Im running a 2012 macbook pro with 10.9.3
boom mind blown

I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?

Most users should use the Time Capsule for backups. This assumes that "original" copies of your data are on the computer and backups of this data are stored on the Time Capsule.
If either the Time Capsule or the hard drive on your computer fails, there are at least copies of your important data on the other drive.
If you are asking if you can place "original" files on the Time Capsule, do you have a plan to backup those files?
If the Time Capsule drive has a problem....and your only copy of your important data is on the Time Capsule....you will lose everything.
If you are asking if this is OK, the answer for most folks would be "no".
Can you clarify if this is what you are asking?

Why is my External Hard Drive not showing in Aperture 3.6 Import?

Why is my External Hard Drive not showing in Aperture 3.6 Import?
Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.

Only my computer hard drive is and I want to import from an external drive. I have always been able to until I updated to Aperture 3.6 and Yosemite.
I had the same problem. On the folders on the drive with the Aperture library did show in the Import panel. After I clicked the computer icon in the upper left corner of the Import panel, suddenly all drives appeared.
You can also try to drag the folder you want to import into the Import panel, to point the file chooser to the drive.

I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-e (.mts)

My movies are type MPEG-2
I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-2 (.mts)
What can I do ?

1. Is your external HD connected by firewire?
2. mpeg2 is the final compressed delivery format of a DVD, not intended for editing, and iMovie cannot handle such files, so you need to convert them first:
For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.

External Hard Drive not sleeping or waking

Hi I have a mac mini with Mac OS X Lion 10.7.2. I recently purchased a iomega 2 TB external hard drive that came pre loaded with Mac OS Extended (Journaled) pre formatted on it. I use 800 FireWire for the connection. I had no problems with the drive mounting and transferring files until I put my computer to sleep. I took me some time to figure out that the sleep function was the cause of the problem I was having. The drive would still be listed in finder after my computer woke but when accessed finder would freeze up and I would get the spinning cursor. Also when I left it to sleep over night I would find the drive off and an error that it had been ejected wrong.
I watched the drive when I put my computer to sleep get the sleep command and flash for a second and start to sleep but then come on again as if there was an error in the sleep command from my mac. If I wake my computer again to see the action of the drive it then goes to sleep when my computer is waking. I am guessing the command is the same to the drive from my mac. Wake or sleep, it just depends on the drives current state as to whether it sleeps or wakes.
My fix so far is to not let my computer sleep at all. As well I have to choose in system preferences to not allow the drives to sleep. Did notice after some time the external hard drive will sleep anyway from idle time but now my mac is not sleeping obviously. Or I have to eject the disk manually and then turn off the external hard drive then put my computer to sleep.
Am I missing something here? It's either a hard drive error or a software bug in Lion.

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

When is Apple going to fix the problem with external hard drive not working on Lion?

As for everyone else external hard drive does not work with Lion.
When will Apple fix this problem. Do they just ignore the customer : (

Copy off all your data off the NTFS formatted drive to another drive
Open Disk Utility in the Applications>Utilities folder
Select your external NTFS drive on the far left, should have the drive makers name, a ID perhaps plus the word "media"
Click the Partition Tab, click the big box and click 1 Partition
If you want a Mac only drive > Option: GUID >format OS X Extended (Journaled)
If you want a Mac/PC drive (for over 4GB sized files) > Option: MBR > format exFAT
If you want a Mac/PC drive (for the most compatibility with other devices, Win XP, but only under 4GB sized files) > Option: MBR > format MSDOS (FAT or FAT32)
Give it a name and click Apply.
You can also search Microsoft for a free exFAT download if you have Win XP.
https://discussions.apple.com/message/16276201#16276201

How to stop my Time Machine external hard drive preventing iMac from sleeping?

I have a late 2012 iMac, and have discovered that sometimes (I haven't noticed a pattern of when it doesn/doesn't happen) the computer will immediately wake up after I set it to Sleep (Apple Menu>Sleep). Through elimination I have found that it is the the USB 3.0 external hard drive I use as a Time Machine back-up that is the culprit; unplugging it then allows the computer to sleep. If I unplug it, then plug it back in later on, this normally solves the problem for a while, but not forever. This same Hard Drive didn't cause the wake problem on my previous '08 iMac.
A big issue is that when the machine immediately wakes from sleep, the display stays off (until I move the mouse) - this is good from a power saving point of view, but means I don't know if/when the machine is immediately waking from sleep (I have to listen to the fan when setting it to Sleep mode to hear if it has actually woken back up).
I've searched the forums, but can't find another poster with the same problem as myself. Can anyone advise a course for me to pursue to prevent this from happening?
Thanks. Jamie

Hi Frank. Nope, I'm still having the same symptoms; the plugged in external drive (TIme Machine) will wake the machine up a couple of seconds after it winding down when put to into sleep mode. Ejecting the drive and then sleeping the machine works. After plugging it in again to do a Time machine backup, it will allow the computer to sleep soundly for the first few sessions (eg a few days of sleeping, waking, sleeping, waking, etc), but then it will then suddenly start preventing it from sleeping again after a while.
It seems I'm fortunate in my case that the display stays dark (or off?) when the machine has been woken from sleep, but this was actually preventing me from knowing the machine wasn't in fact asleep for quite some time; I only eventually cottoned on because there wasn't any delay when 'waking' my machine (which there normally is). I would then have to carefully listen to the spinning fans to know if in fact it had gone to sleep or not.
So, to summarise, unfortunately no, I haven't solved this yet. If anyone else has a solution, please let us know?
Also, I've noticed occasionally after waking that there is a relatively quiet 'crackle' sound (kind of electrical sounding) from the bottom-right area of the machine. This goes on every so often for about 30mins. I see this is also an issue with other people's late 2012 iMacs, but I've not seen if anyone has a solution to it?

Time Machine & external hard drives not used daily

I have a question about Time Machine and external hard drives that I used for storing digital files. I do not need to turn on these drives every day. Or even every week. Is Time Machine going to "forget" them (delete their files from backups) if I don't turn them on regularly? What do I do to make sure they are safely backed up and that they stay backed up even if they aren't turned on every day?

As I said, then, "Time Machine will simply pick up wherever it left off." Just be sure to properly eject the drive before disconnecting or shutting off.
The "speed" question is a new one not present in your original post. You can address that in the following:
Kappy's Personal Suggestions About Mac Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utility is: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption. Drive Genius provides additional tools not found in Disk Warrior for defragmentation of older drives, disk repair, disk scans, formatting, partitioning, disk copy, and benchmarking.
Four outstanding sources of information on Mac maintenance are:
1. OS X Maintenance - MacAttorney.
2. Mac maintenance Quick Assist
3. Maintaining Mac OS X
4. Mac Maintenance Guide
Periodic Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) See Mac OS X- About background maintenance tasks. If you are running Leopard or later these tasks are run automatically, so there is no need to use any third-party software to force running these tasks.
If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced after Tiger. (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
Defragmentation
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive except when trying to install Boot Camp on a fragmented drive. But you don't need to buy third-party software. All you need is a spare external hard drive and Carbon Copy Cloner.
Cheap and Easy Defragmentation
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive. You will use Carbon Copy Cloner to create the backup and to restore it.
1. Get an empty external hard drive and clone your internal drive to the
       external one.
2. Boot from the external hard drive.
3. Erase the internal hard drive.
4. Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not depressed or is ghosted.
5. Click on the Clone button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the upward pointing arrow button.
After startup do the following:
Erase internal hard drive
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your internal hard drive (this is the entry with the
       mfgr.'s ID and size) from the left side list. Note the SMART status of the
       drive in DU's status area. If it does not say "Verified" then the drive is
       failing or has failed and will need replacing. SMART info will not be
       reported on external drives. Otherwise, click on the Partition tab in the
       DU main window.
3. Under the Volume Scheme heading set the number of partitions from the
       drop down menu to one. Set the format type to Mac OS Extended
       (Journaled.) Click on the Options button, set the partition scheme to
       GUID then click on the OK button. Click on the Partition button and wait
       until the process has completed.
Restore the clone to the internal hard drive
1. Open Carbon Copy Cloner.
2. Select the Source volume from the left side dropdown menu.
3. Select the Destination volume from the left side dropdown menu.
4. Be sure the Block Copy button is not selected or is ghosted.
5. Click on the Clone button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.
Malware Protection
As for malware protection there are few if any such animals affecting OS X. Starting with Lion, Apple has included built-in malware protection that is automatically updated as necessary. To assure proper protection, update your system software when Apple releases new OS X updates for your computer.
Helpful Links Regarding Malware Protection:
1. Mac Malware Guide.
2. Detecting and avoiding malware and spyware
3. Macintosh Virus Guide
For general anti-virus protection I recommend only using ClamXav, but it is not necessary if you are keeping your computer's operating system software up to date. You should avoid any other third-party software advertised as providing anti-malware/virus protection. They are not required and could cause the performance of your computer to drop.
Cache Clearing
I recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, Mountain Lion Cache Cleaner 7.0.9, Maintenance 1.6.8, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Corrupted cache files can cause slowness, kernel panics, and other issues. Although this is not a frequent nor a recurring problem, when it does happen there are tools such as those above to fix the problem.
If you are using Snow Leopard or earlier, then for emergency cleaning install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (AppleJack works with Snow Leopard or earlier.)
Installing System Updates or Upgrades
Repair the hard drive and permissions beforehand.
Update your backups in case an update goes bad.
Backup and Restore
Having a backup and restore strategy is one of the most important things you can do to maintain your computer. Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. You can never have too many backups. Don't rely on just one. Make several using different backup utilities. My personal recommendations are (order is not significant):
     1. Carbon Copy Cloner
     2. Get Backup
     3. Deja Vu
     4. SuperDuper!
     5. Synk Pro
     6. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance and backup and restore.
Always have a current backup before performing any system updates or upgrades.
Final Suggestions
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space. Avoid installing utilities that rely on Haxies, SIMBL, or that alter the OS appearance, add features you will rarely if ever need, etc. The more extras you install the greater the probability of having problems. If you install software be sure you know how to uninstall it. Avoid installing multiple new software at the same time. Install one at a time and use it for a while to be sure it's compatible.
Additional reading may be found in:
1. Mac OS X speed FAQ
2. Speeding up Macs
3. Macintosh OS X Routine Maintenance
4. Essential Mac Maintenance: Get set up
5. Essential Mac Maintenance: Rev up your routines
6. Five Mac maintenance myths
7. How to Speed up Macs
8. Myths of required versus not required maintenance for Mac OS X
Referenced software can be found at CNet Downloads or MacUpdate.
Most if not all maintenance is for troubleshooting problems. If your computer is running OK, then there isn't really a thing you need to do except repair the hard drive and permissions before installing any new system updates.

External hard drive not ejected properly?

Hi.
I've just bought a 1 Tb Hitachi external hard drive, to use for Time machine back up.
It's connected using the supplied USB 2 cable.
It installed OK but whenever my mac goes to sleep and I reawaken it, the message appears that the disk was not ejected properly and that next time I should go to finder etc etc.
Could I be damaging the data on the drive? Maybe even - Heaven forbid - lose it?
Thanks

Jim586 wrote:
Hi.
I've just bought a 1 Tb Hitachi external hard drive, to use for Time machine back up.
It's connected using the supplied USB 2 cable.
It installed OK but whenever my mac goes to sleep and I reawaken it, the message appears that the disk was not ejected properly and that next time I should go to finder etc etc.
Could I be damaging the data on the drive? Maybe even - Heaven forbid - lose it?
Hi, and welcome to the forums.
Yes, an improper disconnect can damage the directory structure on the disk. Do a +*Repair Disk+* per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
I'd start by checking with Hitachi's web site: see if there are updated drivers and/or firmware for Snow Leopard. Even though you just bought it, it may have been in stock somewhere for a while and not have the latest goodies.
Also see if there's an automatic sleep or "spin down" feature on the drive that you can adjust or disable.

Time Machine is causing my external hard drive not to be recognized or read

I have been using Time Machine on my MAC. I don't like it. I now have gone into preferences and stopped it from further backups. Now, I want to restore my Toshiba External Hard Drive and have it backup. When I look into my Macintosh HD, it does not "see" the drive. It doesn't appear in Finder. I am assuming that Time Machine configured it or reformatted it? So, how do I get it "back" from Time Machine? One person commented that this is an issue of formatting my hard drive, but the problem started with Time Machine. Where should I post this question, if not here?
Thank you!

I'm guessing that Time Machine hides it from Finder as most users aren't going to want to be mucking around in it. Try opening up Disk Utility and see if you can see it. You can reformat it from there as well.

[Solved] E4200 - External hard drive not recognized

My external hard drive, a 2TB WD Elements, does not appear in the storage list in the web utility of my E4200. The drive is formated as NTFS, single partition. It works fine if I connect it to a computer.
If I connect a 4GB USB flash drive (FAT32) to the router, it does appear in the list.
I'm using the latest firmware, version 1.0.02.
Edit: Down(up?)grading to firmware version 1.0.01 fixed the problem.

Carborundum wrote:
Edit: Down(up?)grading to firmware version 1.0.01 fixed the problem.
not surprised. I was going to reccomend you dropped down too. But I see you fixed it. Kudos to you. Im glad it works. Lots of drives dont work with the E4200.
please fix the E4200 media server in .02 firmware

External hard drive not spinning up

Hi,
I have a 160GB Freecom FHD-3 external hard drive connected to my iBook with USB 2.0 that I use to store all my music / movies etc. I have a slight problem with this drive and i was wondering if anyone could help me.
Firstly when i turn the iBook on with the drive connected it takes a long time (>3 mins) to boot up. Secondly if the drive is connected and i put the iBook to sleep, the drive spins down and automatically powers off. When i wake the iBook the external drive does not spin up and my iBook freezes with the spinning pizza of death as it is desparately searching for the external HD with my iTunes music folder in.
I did not have this problem with my Mac Mini and i was wondering if there was anything i could do to sort it out.
Cheers

dickonhowell, Welcome to the discussion area!
I am guessing that the Mac mini keeps the USB ports powered even when sleeping. I would bet that the iBook turns off the USB ports when sleeping. That is probably why you experience different things with the 2 different Macs.

External Hard Drive Not Showing Files

Hi. I'm really in a panic right now because school starts tomorrow and a problem occurred with my external hard drive today. Before I start, I would like to clarify that I use a Macbook Pro 15" (not Retina Display). Here is what happened:
Around 6 months ago, I was organizing the contents of my external hard drive into folders (i.e. "Movies" > "Romance," "Action," "Horror," etc.). In the midst of doing so, my laptop kind of froze and before I knew what was happening, the contents of the "Movies" folder was invisible. The "Movies" folder itself was still visible and accessible, but its contents were not. When I double-clicked the "Movies" folder, nothing would be shown. It was as if it was empty. The problem is that something was still taking up space on my external hard disk. When my friends asked to copy some of my movies onto their computers, I agreed and saw that they could access the "Movies" folder on their Mac laptops! This means that it was probably a problem with my Mac laptop. I decided to ignore it because I was still able to access the contents of the folder if I plugged in my external hard drive into my TV (it's an LG TV).
Today, I decided that I've had enough with the invisible folder. I needed to access movies from the folder and because I couldn't access it, I got very stressed and decided to repair it myself. It was probably one of the worst decisions I've ever made.
I opened Disk Utilities and clicked "Repair Disk" and then "Verify Disk." I then clicked "Repair Disk" again just to be safe (which was absolutely stupid in hindsight). Hoping it would have solved the problem, I ejected my external hard drive and plugged it back in. Once I plugged it in and opened it, I was faced with this:
There was absolutely nothing else visible in my external hard drive. The reason I'm still fighting to fix this and not throwing out the hard disk is that when I got the info of my hard drive, a lot of space was still taking up my hard drive. Here is what I did (the name of my external hard drive is "Mines of Moria"):
Mines of Moria > right-click > Get Info
Once the info was shown ("Mines of Moria Info"), I saw this:
Do you see how annoying this is?! It clearly states that there is only 17.78 GB left on the external hard drive meaning that there are a LOT of files on this hard drive considering its capacity is 1 TB, but I can't access or see anything inside the external hard drive! I tried to open my hard drive on my brother's Alienware (Windows 7), but it couldn't open it because its format. I also tried plugging it into my LG TV and the only folder visible is the "found.000" folder and I can't access it.
Please give me some advice as to what I can do as soon as possible. I am willing to go to a store to fix it, but I would much rather try to do it myself at home. I transferred all my movies from my laptop to this external hard drive because I had no more space on my laptop (yes, almost 90% of the space taken up on my external hard drive is used up by movies and episodes).
Please help me. I also have school files on here (granted, they are from two years ago, but you never know when you're going to use them). I'm a HUGE movie junkie and I've downloaded so many movies that I don't even remember what I downloaded last week (I just can't keep track of which ones I've downloaded when).
This is really important to me, so I would be VERY grateful for any and all relevant and helpful tips and advice.

The problem is caused by the third-party software you installed in order to make NTFS volumes writable. Refer to the developer for support. You might be able to repair the volume in Windows using the CHKDSK program.

External hard drives not going to sleep

Similar Messages

Maybe you are looking for