External harddrive in network not recognized by windows XP

Hi,
I have an external harddrive (Iomega), FAT partioned, that windows, via bootcamp, will recognize. When I connect the ext. harddrive to my apple extreme, it is recognized by Apple but not by Windows XP SP2.
Anyone the same problems, or better, a solution?
Thanks in advance

Have you installed the Airport Disk application on the Windows XP SP2?

Similar Messages

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

Ipod not recognized by windows, itunes, and will not charge with pc.

yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
-1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
-2nd, windows gave me a message saying the hardware could not be recognized.
-3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

Device not recognized by Windows or iTunes - Blinking green light

When I try to connect my iPod shuffle to my computer (Windows XP), it's not recognized by Windows or iTunes. (i.e. device does not appear in Windows explorer or iTunes) While in the USB port, the Shuffle's green light blinks incessantly. My wife uses an iPod on this machine (under separate user name) and has no problems.
I've tried updating software (iTunes, iPod), restarting my computer and resetting the iPod to no avail. My machine is not on a network. The USB port(s) work fine as I can use my memory stick (no USB cable) with no problems. I've tried connecting my Shuffle under my user name as well as my wife's. Same problem.
Also, I had my Shuffle setup on an old computer (PC, Windows 2000) and it still works fine plugging into that. (I'm getting rid of it soon, hence why I'm discovering these new problems).
Please advise. Since my Shuffle is over a year old, I am not eligible for online chat or phone support without paying for an Apple Support agreement.
I know there's another thread with the same issue that was not resolved on the discussion board.
Thanks to anyone who can help.

Recently I used my ipod at work all night, just like normal. After work on the way home, like normal, I plugged it into my aux port on my car's head unit, and plugged it into power. 10 minutes later, in the middle of going over Ortgea Highway(hiway 74 between Orange and Riverside Counties), it just suddenly stopped working. When I plug it into any of my computers at home, nothing happens, it is not recognized or seen. When I plug it into power, it displays either a "sad ipod icon" or a battery with exclamation mark(!) icon. I have brand new power adapters both for the car and home, plus brand new usb cables, thinking that would help. It hasn't and now, since I opened those packages, I am out that $$ and ******. Since I received this unit as payment for electrical services rendered, I have no idea how old it is. Does anyone have any ideas? ([email protected])

IPod not recognized by Windows / iTunes

Hello,
I hope someone here can help. So far my first experience with Apple support has NOT been a positive impression.
I searched for info on this problem, but the other ones I see all seem to be related to freezing or battery issues.
iPod Classic 120GB, I don't sync very often, and just finished doing a bunch of cleanup in iTunes (album artwork, song info, etc.) and want to re-sync the pod.
When I connect to the PC with the USB cable, Windows doesn't seem to recognize the device, and it doesn't show up in iTunes.
It is charging through USB, however. The battery is fully charged.
I tried 3 different USB ports on the PC.
Tried restarting iTunes.
Tried restarting the computer.
Went to Apple support website, tried the troubleshooting assistant:
Reset the pod.
*Had already tried different USB ports.
*Had already trired restarting the PC (Although it mentions checking for the latest software updates - I didn't do this. WHAT software updates should I look for? Device drivers? OS updates? WHAT???)
Re-installed iTunes. (Was already at v 9.2.1.4)
*Did not try the restore. Reading the instructions, it appears that the iPod has to be connected to do this, and that's the problem -won't connect!
Also read something about disk mode. I set the iPod to disk mode, but it's not recognized that way, either. When connected by USB in this mode, the iPod screen still says "OK to disconnect".
I tried the link "iPhone, iPad, or iPod is not recognized by Windows".
I do not see the "Apple Mobile Device USB Driver" anywhere in Device Manager. I suppose this is the problem.
However, continuing with the instructions, it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC?????
(These instructions also say to disconnect the device, but nowhere says when to connect it. Why do they put half-baked troubleshooting instructions on their web site???)
Is there anyone from Apple support on this list who can help? I believe the driver needs to be reinstalled somehow, but it didn'thappen when i re-installed iTunes, so how do I do this?
Thanks
Keith

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

External hard drive is not recognized after attempt to format

I just got a new macbook and couldn't use my external hard drive because it was formatted on a PC and only allowed me to read the data. I backed up the data on the 250gb hd and then used Disk Utility to erase the hd and format it as "Mac OS extended (journaled)." After beginning, Disk Utility stopped working and showed up as "not responding" in the Activity Monitor.
Now the hd does not show up on the desktop and can only be seen in Disk Utility. If I try to erase again or partition the hd the utility stops responding. If I try to zero out the drive it continues to say "preparing to zero" indefinately. Now the hd is also not recognized by windows except in the windows disk utility, but it does not even give the option of formatting/initializing it, so that is not an option.
Has anyone ever seen anything like this before, or have any idea of something that I haven't tried yet. I really want to get the drive working and have exhausted all the ideas I can come up with. The internet has not provided too many ideas either.
Thanks so much for your help.
Black MacBook Mac OS X (10.4.6)

I have crazy solution to format it to FAT 32, it work a couple times on my several MAxtor, and Western Digital HD. But this is the last resort and if you are not handy and familiar, don't do it.
It happen on my external HD, so I crack the enclosure open, pulled the HD out and attached it as internal HD on a PC after adjusting the jumper to master and make sure no other HD attached to the motherboard. Make sure the motherboard detected (you can see it from bios menu).
Insert a bootable installer disk before XP ('98, ME, or 2000), and start from there until a promt comes, and type fdisk and you delete the old partition and create a new partition and restart once using the disk still and format it using FAT 32.
After that you put it back to the enclosure, and mount it to MacBook as a new HD with default factory format.
If you don't have the installer disk, this might help :
http://www.bootdisk.com/
But if your maxtor still under warranty better talk to them first and they might willing to reformat it for you.
Hope this help your external back and let you use it on your MacBook.

"USB Hardware Not Recognized by Windows"

Please help. I keep getting an error mssage "USB Hardware not Recognized by Windows" I believe i have tried it all. Uninstalled Itunes. Reinstalled Itunes.
Okay I just tried pluggin it in as I typed this and it worked. The only thing I did diffrent was I unplugged my External Back-up drive.
Is this Common? Can anyone help explain this to me?

I have a combo floppy drive/USB 2.0 card reader and I believe I have the same problem.
I'm not over-clocking and while USB shows up in WinXP in device manager the card reader is not recognized by the system even though I KNOW I have it connected correctly. The floppy works fine.
I believe the 4 USB ports on the mobo are non-functional but can't test it until Thursday sometime.
Hopefully this is correctable with a BIOs update.
Anyone else have issues with the USB ports on the mobo and if so, were you able to fix it? How?

My external USB drive is not recognized by Win XP

Hi!
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Thanks for any help!
/ Anders

Hi Anders and welcome to Discussions,
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Yes it will !!
Although with the BootCamp 3.0 Drivers (from the OSX Snow Leopard DVD) and the 3.1 Driver update (downloadable) Apple has introduced read-access to HFS+ partitions from Windows this feature seems to have some serious problems for some people.
Personally I see this feature as "experimental" at the moment.
XP itself knows nothing and therefor can not use/see HFS+ partitions and GPT (GUID partition table) harddisks.
You might wanna have a look (or buy) at MacDrive http://www.mediafour.com/products/macdrive/ which right now is the better solution.
Thanks for any help!
/ Anders
Hope it helps
Stefan

802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

Out of warranty by a month!
Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
The touchscreen still works while the screen is black.
System restarted after sleep mode I think.
The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
When on the external monitor the internal display is not even recognized by windows.
When I boot in safe mode, the internal screen works fine with of course limited capability.
I have reloaded display drivers from the support site.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Anyone have any clues as to what my be going on? Hardware, driver etc???
What information can I provide?
Solved!
Go to Solution.

This is a pretty weird issue with conflicting observations.
1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
2) Display works on external monitor in regular mode. (So, not drivers issue)
Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
Could you re-open and check that all connections are good?
Is the Wi-Fi card working well?
I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

Stor.e slim not recognized by Windows 8.1

Hello,
A Stor.e slim external HDD is not recognized in Windows 8.1 (no problems with Windows 7). When plugged in, it s shown as a non-recognized device. Driver is being sought, but not found.

Hi
The Stor.E Slim external HDD is an 2.5 USB 3.0 HDD and it requires 900mA power in order to work properly.
I guess there is nothing wrong with this HDD but with your notebook.
The Win 8/8.1 requires different drivers and probably you need to install an proper driver in order to get the USB ports working properly (USB 3.0 as well as additional chipset driver would be also required).

5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

Ipod not recognized by windows or itunes

OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

OK here's a humdinger: my ipod used to be recognized by my computer (meaning Windows XP), but then abruptly stopped in a catastrophic meltdown that completely wiped my ipod of everything -- didn't even show the menu. Fastforward, ipod is replaced. Windows will still not recognize it -- most of the time. The toolbar says USB device detected and hardware installed and ready to use, but the message that it's not recognized by Windows still appears. Now I said it was recognized sometimes. When it magically is (this is my only description for it because there is no apparent reason), and this is rare, usually after the computer has been turned off for awhile, the ipod will sync through about a fifth of my library then quit. The "disc cannot be found" message appears, and Windows stops recognizing and I'm back to square one. One would think that I now at least have a fifth of my songs on the ipod. Nope, just one for each time this has happened (being 2). Please do not respond with anything having to do with updating or uninstalling/reinstalling drivers, disabling USB 2.0, searching for E:\ drive, Windows Update, the whole appleipod.bat thing, updating itunes, or scanning for new hardware as I have tried these and a few other solutions. I'm just wondering if I'm completely, well, you know. Thanks for your time.

I need help, my ipod touch is not recognized by windows as a harddisk

i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
i would like to transfer the files from pc to my ipod touch without useing itunes.
as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
Message was edited by: B0Om

B0Om wrote:
ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
how do i put programes and games in my ipod touch
Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

My 4 generation I touch is not recognized by windows 7 on any computer

My itouch is not recognized by windows 7 on any computer. Please help me. Thank you Gail

Hi Gail,
Have a look here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes

External harddrive in network not recognized by windows XP

Similar Messages

Maybe you are looking for