External Hardrives - Can they be switched from PC to Mac?

Hi-
I'm a poor grad student which means I have a hand-me-down PC, and I hate it. But dollars to buy a new Mac won't come for another few months at least so I am stuck with this piece of crap. For my research I am taking scads of photos (many gigabytes), which are currently stored on my hard drive, but that I would like to back up with some sort of external device. Thus I have purchased a Western Digital Passport external hard drive, which connects via USB and is compatible with both Windows 98/2000/XP and Mac OS 9.2.2 or Mac OS X 10.1.5+. My question is the following: if I use this device with my ****** Dell PC and store photos (and maybe mp3s) on it, will I then be able to plug it into the USB port on a new Mac and have everything be ok (as in I can read and manipulate the files that were saved via my PC on my Mac and also still use the device to store new files generated on the Mac)? Does anyone have experience with this? Thanks!

Yes, if formatted as FAT32 (MS-DOS).
iFelix

Similar Messages

I downloaded 10.5.1 now I cannot open libraries from my external hardrive. They are not highlighted when I open using the Option key

I downloaded 10.5.1 now I cannot open libraries from my external hardrive. They are not highlighted when I open using the Option key

Hello, when you try Tylerdowner's reply make sure that you '''do not install Firefox using a limited Windows XP account''', you need sp2 and above in your xp.
thank you

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

Once a older version of a program is uninstalled on a mac, can they be deleted from apps folder?

Once a older version of a program is uninstalled on a mac, can they be deleted from apps folder?

Did you use the Migration Assistant to help set up the new iMac using some of the files in the older PC? Some likely won't mean much, unless you have applications that can use or convert them. There's also a way to use the software Time Machine to import data files from an external or another computer, so you may have used that, too.
Hopefully someone with experience in a similar issue will reply...
Good luck & happy computing!

Gettting Ready to switch from PC to MAC-Can I use my back-up catalogue?

Hi! I am getting ready to switch from PC to MAC. My pics and back-up catalogue files are on an external hard drive. I am wondering if I can just use an up-to-date back-up catalogue to place in lightroom on my new MAC and then be up to speed. Will that work?
Thanks so much, Leora

Yes, this should be fine! You may wish to give your catalog (the .lrcat) a new name (prefix) when you first copy it to your Mac. This will force build a new Previews folder on the new machine, sometimes a very good thing; sometimes wholly unnecessary.....

I'm switching from PC to Mac. I'm using my one time switch for Lightroom. I have elements 7. Can I upgrade or do I née to just buy outright?

I'm switching from PC to Mac. I'm using my one time switch for Lightroom. I have elements 7. Can I upgrade or do I née to just buy outright?

If you use the organizer, you need to buy the boxed version of PSE 12. You can usually find it at big box stores and online retailers for less than adobe's upgrade price, if you shop around. You need the boxed version because you get a serial number that works on both platforms, and you will need to install PSE 12 in windows first, upgrade your catalog, then make a full backup to a removable drive and restore from that to the mac, after installing PSE 12 there.
If you don't use organizer, it doesn't matter.

HT1338 If I have OS 7.5 installed on an external drive, can I start up from the external drive in that OS when my macbook pro is 10.7?

If I have OS 10.6 installed on an external drive, can I start up from the external drive if I have 10.7 installed on my macbook pro?

Provided that the MBP supports booting from that version of 10.6, and the install was from a retail disk (not a different Mac model), then yes. If it's a newer Pro that came with Lion, it may not boot to 10.6.
Matt

How can I transfer pictures from my old Mac mini to an external hard drive?

HHow can I transfer pictures from my old Mac mini to an external hard drive? Thanks.

Normally you should be able to drag and drop them onto the drive, provided the drive is Mac formatted. Have you already tried that?
Matt

Does Time Capsule back up everything on my computer? If I inadvertently delete photos from iPhoto can they be retrieved from Time Capsule?

Does Time Capsule back up everything on my computer? If I inadvertently delete photos from iPhoto can they be retrieved from Time Capsule?

About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.
Also, see Pondini's Time Machine FAQ

Can I switch License switch from PC to mac? AE cs5

Can I switch License switch from PC to mac? AE cs5

Platform swaps only apply to current versions. You need to upgrade to CS6 and make the switch.
http://kb2.adobe.com/cps/405/kb405819.html
Mylenium

I have CS6 Design & Web Premium, would like to switch from PC to Mac. Can I do this for free?

I have CS6 Design & Web Premium, would like to switch from PC to Mac. Does anyone know if it's possible to do this for free? I have no interest in upgrading to CC.

Order an Adobe product platform swap or language swap
Mylenium

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

IPod classic - switching from Windows to Mac

I have an iPod classic and am switching from Windows to Mac - what's the best way to retain my iPod library? Thanks!

If you just want to connect and use the iPod on the Mac then set it to manual update on your PC first. The content of iTunes and the iPod are not syncronised in this mode so the two can be different. You can directly access the content of the iPod and play it through iTunes and you can drag and drop whatever you want to the iPod from either library:
Using iPod with Multiple computers
Managing content manually on iPod and iPhone
Syncing Music to iPod
Something else to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod
Macs can read Windows drives, the iPod shuffle for instance comes Windows formatted and is fully supported (you can update the firmware or restore it on the Mac and it retains it's Windows formatting). Other iPods (such as a 5th Generation or Classic for example) can be used in Windows format on a Mac but have to have the firmware updated or be restored on a PC to maintain the formatting. If however you don't intend using the iPod on a PC again you'll need to transfer your library from your PC so you can restore and reformat the iPod and keep it's firmware updated.
Once you are safely connected there are a few things you can do to restore your new iTunes directly from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
The transfer of content from sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod. I use Senuti but have a look at the web pages and documentation for the others too, you'll find that they have varying degrees of functionality and some will transfer movies, videos, photos and games as well. This is just a small selection of what's available, you can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
Senuti Mac Only (Currently only the beta version is iPod Touch & iPhone compatible)
PodView Mac Only
PodWorks Mac Only
iPodDisk PPC Mac Only (experimental version available for Intel Macs)
TuneAid Mac only (iPhone and iPod Touch compatible)
iPodRip Mac & Windows
YamiPod Mac & Windows
Music Rescue Mac & Windows
iPod Music Liberator Mac & Windows
iGadget Mac & Windows (iPhone and iPod Touch compatible)
Floola Mac & Windows
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide

Painless switch from PC to MAC

As many people do so, i will be making the switch from PC to MAC in 2009.
Since i want to do this as painless as possible, i want to be prepared as good as possible. I already found some information about licensing but i'm also much concerned about the technical issues.
- Creative Suite CS2 / Photoshop CS3 : can i take all my actions, custom settings, brushes etc to the other side? All compatible. Concerning third-party plugins i know i will have to contact them seperately
Working a lot in Indesign and Illustrator, i expect to have many Font issues. Any advice on this?
- Lightroom: i have 5 collections and some 100,000 photos in DNG, JPEG and PSD format on 3 different (internal and external) drives. I backup on another external drive. I'm concerned making the switch, Lightroom's database will either not be compatible or will not take along all settings (presets, keywords, sets, etc).
- color consistency / calibration. I know the colors displayed on my current monitor are correct. Can I expect differences when displaying my photos on a mac?
Anything else I have to think about? I don't want to lose years of work neither spend weeks switching from one platform to the other. Any advice is really welcome.

Mr. Isaacs,
Please note this definition of the word misinformation:
"False or inaccurate information, esp. that which is deliberately intended to deceive..."
I am not a lawyer, and you might not be either: but when I am repeatedly given misinformation by representatives of a corporation, I must consider the possibility of fraudulent behavior. Whether or not the persons giving out the misinformation are employees or outsourced contractors is immaterial to me; the ultimate responsibility lies with Adobe's management.
Here's another example for you of misinformation. I discovered yesterday (after quite a bit of searching) that Adobe Acrobat Pro for Mac does not include the application LiveCycle Designer. However, when I looked at the product description on the Store page, I saw no mention that this is a Windows-only feature:
From http://www.adobe.com/products/acrobatpro/features/:
"Create dynamic forms
Use Adobe LiveCycle Designer, a professional form design tool included with Acrobat 9 Pro, to further customize and automate dynamic XML forms."
I have several forms that I have created for clients using LiveCycle Designer. However, now that I have a Mac, I will be unable to edit those forms in Acrobat Pro, which I purchased as part of Creative Suite. From Help files http://help.adobe.com/en_US/Acrobat/8.0/Professional/help.html?content=WS58a04a822e3e50102 bd615109794195ff-7dfd.html:
In Windows, you can use LiveCycle Designer to edit forms that were created in Acrobat, but Acrobat can’t edit form fields that have been opened and saved in LiveCycle Designer.
So now I will need to purchase a full copy of Acrobat Pro for Windows ($449.00 USD) in order to continue to use the forms that I have created for my paying clients.
Just out of curiosity, I decided to ask a sales representative about whether or not LiveCycle Designer is included in the Mac version. I clicked the Chat button on the Acrobat Pro product page, and initiated a chat with "Randy." Here's the important bit of our conversation:
"Adrienne: Just to clarify, the Mac version of Acrobat Pro 9 does have LiveCycle designer included?
Randy: Yes."
"Randy" was only too eager to take my money then and there. Of course, if I had purchased Acrobat Pro 9, and once I opened, installed, and ran the software, I would have discovered that I did not in fact have LiveCycle Designer. I could then initiate a return, which would hopefully be completed within the three-week time frame specified.
I repeatedly requested that I be given an ID for the chat, either the representative's ID or a reference number for the chat. "Randy" told me he couldn't give me any "personal information," (I did not ask for his last name, just a way to identify him) but said I could email myself a copy of the chat. I entered my email address as instructed but never received a transcript of the chat.
I can only conclude two things from this experience:
One: Adobe's management of its Customer Service and Sales departments is incompetent;
OR
Two: Adobe is deliberately trying to deceive me, the customer, with "bait and switch" tactics.
If it's the first case, then I am only too eager to stop buying products from a company that cannot manage its Support and Sales teams. If it's the second case, I must consider filing a complaint with the FTC.
Mr. Isaacs, if you were in my position, what do you think you would do?

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

External Hardrives - Can they be switched from PC to Mac?

Similar Messages

Maybe you are looking for