External HD connected to Time Capsule via USB, how can I back up this drive to Time Capsule?

I have my itunes media all on an external drive connected directly to Time Capsule via USB.
I plan to share this external drive over the network to share my media, but how can I back up this drive to the Time Capsule?

how can I back up this drive to the Time Capsule?
You will have to do this manually using the Finder, or try a commercial application like Chronosync or Carbon Copy Cloner which might be able to backup a network drive to another network drive. Check with their support folks first before you buy.
If you could connect the external drive directly to a Mac, Time Machine would backup both the Mac and the external hard drive (assuming that the external is formatted correcly to work with Time Machine).

Similar Messages

  • I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?

    I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?

    Try a different FW800 cable and also try doing a SMC reset. If neither work try another FW800 device to see if it's recognized, if it is then  you know it's not the Mac it's probably the EHD.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

    Shootist007 wrote:
    If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
    Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad.  Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS.  Just maybe right genius?  Don't rush to criticize someone's recommendations until you realize other possibilities.  (I did say "if it does")
    Thank you

  • Recharging my iPod (3rd gen.) on my 2010 iMac goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found itth

    Recharging my iPod shuffle (3rd gen.) on my 2009 iMac (OS 10.5.8) goes extremely slowly (via usb port at the back). This is mainly because recharging stops when my mac goes to sleep. I just can't believe that Apple doesn't have a sollution for this, but I haven't found it yet... What's the most efficient way of recharging?

    Purchase a wall charger for it instead. 
    B-rock

  • I have an external hard drive connected via usb, how can I view the contents?

    I'm new to Mac... I have an external hard drive, I plugged it in to the usb port but don't know how to view the contents.  What do I do?

    Open Finder (by clicking on the icon int he Dock) and your external USB disk should show up in the left pane under "Devices".
    Note that it has to be formatted for Mac if you want to read and write data.

  • How can I see my network drive from time capsule on windows vista pc?

    I connected my Time Capsule 2tb to Windows PC and do not see the Network Drive for TC. I can see TC on my wireless MacProBook, but cannot see TC drive on the pc. What can I do on the PC to find Time Capsule's drive?
    Thank you.

    From the Mac as it is easier to use.. open airport utilty and go to the  disks, file sharing page. turn on the guest account.. give read write  access.. and make sure the TC is in the correct workgroup or type in the  work group name.. update the TC.
    In vista.. Open windows explorer.. in the address bar type \\ip\
    IP meaning the IP of the TC. . wait.. waiting wait.. windows scratches its bum.. thinks some more.. will finally kick up a username and password request.. type in whatever you need. Voila.. TC appears.

  • How can i change my hard drive from time machine to a normal harddrive

    Hi guys I wrongly set my flash drive to my time machine drive but now i can not turn it back as the same it was at first . the main problem is PC are not able to identify my flash drive?

    First transfer any important information on the flash drive to your internal hard drive. Then open Disk Utility. You should see your flash drive in the list on the left, select it and then select the erase tab to the right. Name your flash drive and set format to MS-DOS (FAT). Hit the erase button and it will be ready for pc and mac.
    Message was edited by: Buda71

  • Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

    Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

    Hi Bob,
    I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
    Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

  • Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

    Dear Community,
    how can I connect SCSI tape recorder via USB to iMac ?
    Is there any adapter/converter on the market now ?
    Cheers, Marek

    Thanks Jan.
    Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
    I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
    Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
    Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
    My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
    Best regards,
    Marek

  • N70 unable to connect phone to compter via USB hel...

    Brand spanking new N70, downloaded PC suite however not able to connect phone to compter via USB to transfer music. Can anybody help?

    Hi bento
    When you install PC Suite for first time there are TWO seperate processes, firstly installing PC Suite then returns to desktop and then secondly establishing connectivity during which "Nokia Connectivity Cable Driver" and "PC Connectivity Solution" installed.
    You could go to Setings > Control Panel > Add/Remove Programs > Repair and see if this helps
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • I get the question mark in the folder on start up, but if i connect the same hard drive via usb it works fine is the hard drive faulty?

    but if i connect the same hard drive via usb it works fine is the hard drive faulty?

    It sort of sounds like a startup disk issue.  Have you tried starting up holding down the "Option" key?  This should generally give you the option of which drive you want to boot from after a few seconds.  Sometimes, especially if you had previously booted from an external drive (and it sounds as if you have) they system wants to continue booting from that drive.  If it can't find it, it just sort of hangs there.  Try holding down the "Option" key and see if your internal drive is shown as an option.  If it is, select it.  If you manage to get into the OS, go to System Preferences / Startup Disk and select the correct drive (even if there is only one drive shown, you should still select it).

  • How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?

        How do I set up my iPhone 4s to sync automatically to iTunes when connected to my iMac via USB?  Currently it only syncs when I manually click on sync.
        Somehow I do have my 5th gen. iPod set up to sync automatically with the same iTunes / computer.  But I do not actually see a checkbox for either device.
        (yes, the 'prevent devices from automatically syncing' is unchecked)
    thank you!

    Turn off mobile data?
    Talk to your carrier about the usage increase.
    Googling provides many tips- https://www.google.com/search?q=reduce+iPhone+data+usage&ie=utf-8&oe=utf-8

  • A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1

    A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?

    Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
    If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
    Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer.

  • My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately.

    My HP Deskjet 1055 was connected to my laptop via USB and wiould not print immediately. However, when the computer was restarted, the printing job started. Please help me with a solution.

    The problem is with your computer's USB port as it is powering down to save power. You need to turn this off. Go here. http://www.ehow.com/how_6818080_turn-port_s-power-save-option.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • My ipad is not charging while connected to any device via usb cable

    my ipad is not charging while connected to any device via usb cable

    If you mean that you've connected it to a computer's USB port then a lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

Maybe you are looking for