External hd does not show up in devices

I have a late 2013 macbook pro and a 500GB WD external harddrive, back from when I was still on Windows. Therefore, it's a NTFS-formatted drive. I followed this guide to enable my macbook to read and write to it and later followed this guide to enable my macbook to read and write from all NTFS disks. However, now it no longer appears under 'devices' in Finder. However, it does appear when I open /Volumes and Disk Utility can also see it. Does anyone know why the drive does not appear under devices in Finder and how I could make it show up there?
Bonus question: I have been seeing 'Remote Disc' (see screenshot) ever since. Could that be related? What is it? It seems to be empty.
Thanks in advance!

Thanks a lot Niel,
Diskwarrior is a program for what you need to buy a DVD. I live in Brazil I have no idea where to buy it. Or can you download it?
A

Similar Messages

  • I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

    I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

    Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did  and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
    I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery.   I can go back to the IStudio  here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be.  Thanks for all the help so far. God bless.

  • My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    Hope this helps:
    http://www.apple.com/support/iphone/assistant/itunes/

  • External drive does not show up in finder/ disk utility not able to repair

    Hello,
    My external drive does not show up in finder. But it appaers in DISK UTILITY. When I tried to repair it, it said:
    Verify and Repair volume “ANNE HD”
    ** /dev/disk1s1 (NO WRITE)
    ** Phase 1 - Preparing FAT
    ** Phase 2 - Checking Directories
    Unable to read directory (Input/output error)
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    How can I back up files if the external drive is not found in FINDER? I tried to restore with disk utility, but it doesn't seem to be able to select the hard drive.
    Can you please help me?

    Thanks a lot Niel,
    Diskwarrior is a program for what you need to buy a DVD. I live in Brazil I have no idea where to buy it. Or can you download it?
    A

  • External drive does not show up in Time Machine

    I just applied the lastest update today and now my external drive does not show up in Time Machine. It does show up in Finder.

    Gracias Sir Kappy, These instructions didn't include Yosemite, but I followed the closest and used Mavericks instructions and the command-R was the key, which I suppose means 'restore?' Nothing is explained as we should all be able to read the programmers minds by now...
    Thanks for the help and problem resolved.

  • My samsung external HD does not show its folders on MAC. Does somebody can help me?

    My Samsung external hd does not show its folders on MAC. It runs sometimes at Windows systems. I hadl already tried to configure to show hidden folders, but it does not solve my problem.

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • My new iPad mini does not show under manage devices

    I just purchased a new iPad mini for my husband. I removed his old one from the section of iTunes that reads manage devices. And even though his new iPad mini is synced and backed up, now the new one does not show under manage devices.
    Can anyone tell me how to get it to show up? I called Apple support and the lady trying to help me did not even know what I was talking about.
    Thank you.

    If you're on Windows read this support article.
    If on Mac, read this one.

  • Ipod touch does not show up under Devices in iTunes, but it does in iPhoto

    My iPod touch does not show up under Devices in iTunes, but it does show up under iPhoto.  Can anyone help troubleshoot this problem?
    Thank you for your help.

    try following the info here
    http://support.apple.com/kb/TS3694#error1611
    Error 1611: This error may indicate a hardware issue with your device.  Follow the steps  in this article. Also attempt to restore while connected with a  known-good 30-pin Dock Connector cable, computer, and network to isolate  this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0)  can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611.    To troubleshoot third-party security software, follow these steps.

  • TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • W520 Smart Card reader does not show up in Device Manager

    W520 Smart Card reader does not show up in Device Manager.
    It was working before and now nothing.  Nothing happens when SD card plugges in.
    Could my smart card reader stop working or is this a configuration issue?
    Any thoughts?
    thanks
    Ian

    Hi  Ian,
    Welcome to the community, and thanks for the post.
    The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
    http://support.lenovo.com/en_SG/downloads/default.page?
    After that check if the issue get resolved.
    Regards,
    Sameer
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Kindle does not show up as device when plugged in USB

    I was trying to transfer some files to my Kindle using the USB port. I have a Kindle 2, and a Rocketfish Micro USB cord. The Kindle does charge up so it is drawing power through the cord. But the Kindle does not show up as a device attached to my MacBook. My external HD (Firewire) and iPods (USB) all work perfectly through this USB hub.
    I did call Apple (using my 30 day warranty for installing Snow Leopard) and the tech support person did not even know what a Kindle was.
    Amazon says it's an Apple problem.
    Apple doesn't seem to have any clue.
    I've seen from various threads that USB devices do seem to have intermittent problems. Is the Kindle one such device?

    Some devices do not work properly through a hub. Plug the kindle directly into your Mac and see if it works. Just because some devices work through a hub, doesn't mean all devices work through a hub. Apple does not support third party devices or third party hubs.

  • Graphics Card Does Not Show Up In Device Manager (Re: Installing AMD Video Drivers - Windows 8.1 (Step-By-Step Tutorial)

    This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
    This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
    This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
    If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
    Method 1:
    First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
    Hardware devices are not working or are not detected in Windows.
    http://support.microsoft.com/mats/hardware_device_problems/en-us
    Method 2:
    Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
    Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
    Press the Windows key + X
    Select Command Prompt (Admin)
    Type set devmgr_show_nonpresent_devices=1 and hit enter
    Type Start DEVMGMT.MSC and hit enter.
    Once in Device Manager hit the View menu and select show hidden devices.
    From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
    After you install the drivers, reboot and see if you get any different results.
    If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
    If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    Method 3:
    If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

    This tutorial is a step-by-step tutorial on how to "fix" issues of a new graphics card not appearing in Windows 8.1 Pro, or not appearing (as a device) in Device Manager, or it's not being detected by Windows 8.1.
    This is the "second part" of a Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    GRAPHICS CARD IS NOT DETECTED AND DOES NOT SHOW UP IN WINDOWS 8.1 DEVICE MANAGER
    This problem can appear if the video card is not installed properly in the PCI slot and as a result the card is not detected in device manager. Check the physical connections again, reinsert the card properly in the PCI slot, check the connections (including the power cables going to the video card, and ensure that the fan on the graphics card is spinning and the card does have power and is properly seated/inserted) and then install the drivers from the manufacturer’s website.
    If the video card is in fact installed properly, but the problem of the video card not being discovered/found by the operating system persists, then try these following methods below to check if this solves the problem.
    Method 1:
    First, I would suggest you to run the following Microsoft Fixit to get the problem automatically detected and fixed. This Microsoft "fixit" App checks if the device is currently disabled or turned off or the driver is not installed.
    Hardware devices are not working or are not detected in Windows.
    http://support.microsoft.com/mats/hardware_device_problems/en-us
    Method 2:
    Sometimes, some devices in device manager are hidden due to corrupt or missing drivers.
    Follow the steps below to show hidden devices in the device manager and troubleshoot accordingly.
    Press the Windows key + X
    Select Command Prompt (Admin)
    Type set devmgr_show_nonpresent_devices=1 and hit enter
    Type Start DEVMGMT.MSC and hit enter.
    Once in Device Manager hit the View menu and select show hidden devices.
    From here, remove each instance of the AMD or Nvidia card you see as well as each unknown device. Exit Device Manager and reinstall the latest drivers you can find for your graphics card.
    After you install the drivers, reboot and see if you get any different results.
    If the above solved your problems and the Graphics Card is now working and is now being properly detected/displayed in Windows Device Manager:
    If your graphics card is now being detected by Windows 8.1 in Device Manager, but has a "yellow exclamation" mark (or video drivers are not found or not properly installed or the device is disabled) then install the latest graphics card drivers and proceed with this Step-by-Step Tutorial on how to install AMD Radeon graphics card drivers in Windows 8.1 Pro.
    Method 3:
    If methods suggested above does not help, I would recommend you to contact Apple/AMD/NVIDIA to get the latest chipset, BIOS, graphics card drivers installed properly.

  • My Laptop Pavilion 9700 will not recognize DVD/CD drive. Does not show up in Device Manager

    My laptop Pavilion 9700 will not recognize the DVD/CD drive:
    The drive does not show up in the Device Manager’s list:  The disk spins and the light is on: Use a
    paper clip to open the door;  I updated
    to Sevice Pak 2 recently, but I am not sure if this has anything to cause this
    problem:  Please Help, anyone!
    Thanks

    Hi,
    Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD without the need to install on your HDD.  This will show whether the problem is with Windows or a Hardware problem with the optical drive.
    http://www.ubuntu.com/desktop/get-ubuntu/download
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • When i plug my iphone in to my laptop it does not show up in devices

    i have tried to plug my iphone in to my laptop and download a memo.  however, my iphone does not show up in the devices.  any thoughts on the glich?

    PrinceKavin wrote:
    I need help to fix my iphone 5. i recently plug in my iphone 5 into the computer and tried to play music on youtube, or websites it does not play anysounds....
    Perhaps you need to spend a little bit of time here...
    iPhone User Guide (For iOS 6 Software)

Maybe you are looking for

  • ITunes will not allow me to delete songs off my ipod, option is not available

    i am trying to delete songs from my ipod 160 GB, and i do not have the ability to. I've tried delete key, right clicking, and edit. when i go to edit, delete option is there but grey'd out...please help i'd like to switch up my music. i also tried re

  • Hard disk problems with Far7 ?

    Hello Everyone, I am new to this board, and this is my first post. I purchased a FAR7 board about a month ago, and slowly came to realize I could  not get Windows XP Pro to install. The problem appeared to be with the IDE Controller.  In the BIOS, it

  • Download error code 49

    download error code 49

  • How to  get Workitem ID of workflow

    Hi all, i need to get the Workitem ID of workflow in my extended BOR method for some manipulation. how to achieve this. Please help, its urgent. Regards , Gaurav.

  • Skin does not show up when incorporating .flv file (Captivate 4)

    Hey folks, I am tired of beating my head on the wall, so here is my situation: I am attempting to have Captivate 4 call up a .flv file.  I am using Captivate's built-in feature to associate this file to the Captivate project.  Everything seems to go