External hd...not able to UN exclude it

I have two external HDs that I run off my laptop
I wanted timecapsule to back them both up.
Both were automatically excluded.
On can be taken off the list... the other can not...
help?

On can be taken off the list... the other can not...
The one that cannot.......if the name of the drive is greyed out.....and you cannot select it.....the drive is not formatted in Mac OS Extended (Journaled).
Time Machine cannot back up a drive unless is is formatted in Mac OS Extended (Journaled), which is also known as HFS+.

Similar Messages

External user not able to join Live Meeting, but can join Lync Meeting

We have LYNC 2010 pool with OCS 2007 R2 & Live Meeting clients ( with few LYNC 2010 clients). We are having issue with one external organization with Live Meetings. If any of our company user schedules Live Meeting, the particular external company users
( they have OCS 2007 R2 and Live Meeting clients) are not able to join our Live meetings. If we schedule Lync Meetings, they are able to join successfully through Web Interface.
On the other side, our users don't have any issue to join their Live Meetings.
We have LYNC edge servers and all external users don't have any issue to join our Live Meetings. The external company also don't have any issue with other users.
It's only 1 to 1 issue with Live Meeting ( not Lync meeting).
Any help to resolve this issue is much appreciated...
Tek-Nerd

Hi,
From your description, did you mean it is a coexistence environment?
Did they receive any error message from Live Meeting client?
If possible, you can test with other federation companies with Live Meeting client. If it happen to all federation companies, I suggest to double check port, certificate requirement for federation. If it happen only for one company, please check
if Live Meeting Clients update to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

External table not able to drop--Urgent Please

hi all
I created external table asd in my schema
but now asd not able to drop
giving error table or view does not exist ?
Regards

Hi Rob
I was using plsql developer and i created table like lower case 'asd'
It can drop from tode but not from plsql developer
but i i created table Upper ASD now can drop from plsql developer
Is this the bug of Plsql developer or what ?
Regards

External Users not able to login to Essbase Admin Services.

Hi,
We are facing strange problem in one of our Essbase 9x environments. In this environment, we installed Shared Services, Essbase Admin Services in one server and Essbase in another server.
We configured MSAD and provisioned some users. Now, these users are able to login to Essbase, Shared Services without any issues but not to EAS. Whats more strange is, Native users are not facing any issue while logging to EAS, Essbase. Just externally authenticated users are having this problem.
We checked the logs, but nothing to deduct from them. The EAS screen is just hanging as soon as credentials are entered. We did lot of troubleshooting and even Oracle Support is working
and is of the opinion that the issue is because we installed EAS Console on Virtual Machine which is out of their policy.
Any suggestions are welcome!!
Thanks,
PM

Guys,
I found something that may help or you may have seen this and rectified it already.
When i started the services in foreground, External users are able to login.
This is what i got in the cmd prompt.
INFO: Installing web application at context path /hbrlauncher from URL jar:file:
F:\Hyperion\AnalyticAdministrationServices\deployments\Tomcat\5.0.28\webapps\hbr
launcher.war!/
Jan 6, 2012 11:17:29 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-10080
Jan 6, 2012 11:17:29 AM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-10090
Jan 6, 2012 11:17:29 AM org.apache.catalina.startup.Catalina start
INFO: Server startup in 18952 ms
!!!Setting HBR appname to : HBR:XYZSERVER
2012-01-06 11:19:39,843 WARN http-10080-Processor23 com.hyperion.hbr.core.Access
ControlManagerServer - Error authenticating user in UserServerManager.
2012-01-06 11:19:39,843 WARN http-10080-Processor23 com.hyperion.hbr.core.UserMa
nagerServer - Error authenticating user in UserServerManager.
PM

Not able to connect database from another os user using externally?

Hi,
I want to connect database from another os user. i am able to connect database from oracle externally. but not able to connect different OS user.
As ORACLE User:
[oracle@test1 admin]$ sqlplus /
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jan 16 19:41:57 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
Non ORACLE user:
[sample@test1 ~]$ export ORACLE_HOME=/u01/app/oracle/product/11.2.0.2/
[sample@test1 ~]$ export ORACLE_SID=rman
[sample@test1 ~]$ export PATH=$ORACLE_HOME/bin:$PATH
[sample@test1 ~]$ sqlplus /
SQL*Plus: Release 11.2.0.2.0 Production on Mon Jan 16 19:37:42 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name:
Thanks

You didn't install Oracle correctly, especially you didn't run the root.sh and rootpre.sh scripts.
If you would have read the error message at all, and researched it, you would have known this.
Regrettably however you decided to ignore Forums Etiquette and to abuse this forum with Yet Another Doc Question.
Sybrand Bakker
Senior Oracle DBA

Not able to delete file from external hard disk

I connected my external hard disk to my macbook pro. But am not able to delete any file since it says the file cannot be deleted when I move it to trash. Could you let me know how to delete a file from the external hard disk?

How is your HDD formatted? NTFS? FAT?
Did you write files with rights? When you strike +I on any file, you can see its rights; if you're read-only, you may change your file's rights.

I am trying to authenticate at Filevault preboot using external Serial (RS232) to USB convertor where USB port is connected to my mac machine.But on preboot I am not able to type the password using console where my machine is connected.

I am using an external keyboard which is actually a Device KeyAT who do the keyboard simulator kind of operation over Serial (RS232) to USB connector.
I have a controller machine connected with Serial Port and MAC machine is connected by a USB port to that device.
I am able to type the password on OS X login screen but on using the same device and set up on Filevault preboot I am not able to type the password.
This connector is detected as a USB 2.0 composite device in System Hardware table.
Can someone hints or point out a potential cause or to rectify this issue.
Thanks in Advance.

Which os version are you using?
Which iPod Nano model do you have? iPod Models
iPod not recognized in iTunes and Mac desktop

I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures.Is it ok if i create a vault and delete all my projects in the HD.Can I use an external HD use aperture through the vault??

I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures. I don't know what to do. I created a vault. My plan was to create a vault(put all my master files into an external harddrive) and then delete all my projects in my mac pro's harddrive. Is it the correct way to do it ? What should I do if I have thousands of raw files ? How should my workflow be? Can I use an external HD and use aperture through the vault,without keeping the master files on my computer's hard drive?? Or should I shoot raw+jpeg and store raw files in an external backup harddrive and import only jpegs into my aperture library?

There's a bit to learn. It will slowly make sense.
Aperture is an empty field. You're given a tractor and a whole bunch of attachments. What you grow, how, and where, is entirely up to you.
Vaults are for back-up and only for back-up. They have nothing to do with storing your working files.
When your Library outgrows your system drive (and for good performance, you should leave c. 20% of every drive empty), it's time to convert some of your image's Masters from Managed to Referenced. ("Managed" and "Referenced" refer to Masters, not to Libraries.)
There are hundreds of posts in the forum, and several pages in the User Manual on using Masters.
Many people run Aperture with the Library on their system disk, and most (or all) of their images' Masters on external FW drives. This is a good set-up. Note that you will likely have to take steps to back-up the data on your external drives.
If you do the above, there should be no reason to delete any Projects.
The choice of RAW or RAW+JPEG or JPEG depends on the kind of work you are doing. I capture RAW only -- but I don't do any commercial shoots. Pros on deadlines report that the RAW+JPEG works well for them. Capture JPEG if it saves you time. IMHO, there is not a good reason to shoot JPEG to save space (space is cheap; time expensive).
Short-term solution: buy and use a FW800 external 1 TB drive, formatted "Mac OS Extended (Journaled)", and using Aperture relocate the Masters of all images older than 30 days to that drive. (Be sure to change your back-up strategy to include this new drive; you may need a second new drive.)
This general post of mine might help you understand more about Aperture.

Not able to write on an external hard drive

I recently bought a external hard drive (Seagate) and formated that to NTFS. I used this to store files from my PC. Recently I bought my iMac, and when I connect the hard drive, it recognized it, but I am not able to transfer files from my iMac to the hard drive. Any suggestions on how I can achieve this?
Thanks

Mac can't write to NTFS formatted drives.
If the drive is plugged into a Windows PC, you could write to it via file-sharing with Windows, however.

I'm not able to save any files on an none apple external hard drive, what can i do to make it work?

I bought a omega 320GB external hard drive so a friend could save the files off an old windows laptop i had but now when i try and open the files on my mac, it doesn't let me. i'm also not able to save any file on to this hard drive either! can some one please help me?

The drive has the NTFS format, which the Mac OS can read but can't write to. Copy the files from the external drive onto your Mac, then reformat the external drive using Disk Utility, creating a Mac OS Extended volume and using the GUID partition scheme. Then you'll be able to write to the drive. Note that reformatting erases everything from the drive, so don't do it until after you've saved the drive's contents to other media.

I am not able to use my external hard drive with my Mac.

I am not able to use my external hard drive with my Mac. It was initially used with my Windows 7 laptop. Now when I insert my Hard drive in the Mac, it doesn't allow me to delete, format, make folders or copy new files on to my hard drive. I no longer have a Windows PC and am stuck. I tried going to Disc utilities,selected my HD, clicked on Erase and then changed the Format type to MS-DOS (FAT) but no luck .. Any other steps or advice?

It was likely formatted in NTFS which is readable by the Mac, but not writeable.
You should be able to reformat the disk in Disk Utility.
After having copied all the data off of it, you can try re-partitioning it.
Select the hard drive in the disk list in Disk Utility. Hard drives are the device itself, are left-aligned in the list, and are usually named with the manufacturer, size, and model number.
Click on the Partition tab.
Select 1-partition from the partition menu.
Click the Options button and set to GUID
Set the format to Mac OS Extended (Journaled)
Give the Volume a name and click Apply.

After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.

Hi
After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
Thanks
PT

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Sender File Adapter not able to get file via FTP from an external system

Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.

Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael

I am using an iMac and i am selling it tomorrow. So i am trying to back up all my files on my transcend external HD 500GB. I am not able to create a folder in the transcend and also even if I try to copy a file in the transcend folder. It just wont happen

I am using an iMac and i am selling it tomorrow. So i am trying to back up all my files on my transcend external HD 500GB. I am not able to create a folder in the transcend and also even if I try to copy a file in the transcend folder. It just wont happen. Please help !!
My transcend HD is on read only mode I guess. What to do? I dont have a windows computer to check and I need to create the back up right now..

Welcome to Apple Support Communities
It looks like the external disk is formatted in NTFS, a format that OS X can't write in. The solution is to format the external drive in "Mac OS Extended (Journaled)" (if you are going to get a Mac), or "MS-DOS (FAT)" (if you are going to get a PC) as Format in Disk Utility > http://pondini.org/OSX/DU1.html
Then, you will be able to copy the files you need to the external drive. Note that "MS-DOS (FAT)" doesn't support files bigger than 4 GB.
<Edited By Host>

I am not able to open few files from my external hard disc in snow lepord

i am not able to open few files from my external hard disc in snow lepord

Need more information. Is there a message when you try to open them?

External hd...not able to UN exclude it

Similar Messages

Maybe you are looking for