External Hyperlinks Will Not Change after Publishing

Hi - I'm running the most up to date iWeb and trying to publish external hyperlinks that will not change no matter what I do. They do not overlap, there is no image blocking them, and I have checked and rechecked that they work on iWeb perfectly. I have tried saving each update individually with the inspector, publishing each update individually, re-entering each url then tab or enter - basically everthing suggested on these forums. The site is scullyfilm.com and the external links are to my pages on my squarespace site.
Any ideas?

It's very simple to do and it's virtually impossible to do it wrong.
Here's how I did it.
Went to Squarespace :
http://scullyfilm.squarespace.com/
Right-clicked a link and copied it :
In iWeb, selected a button and made it a hyperlink. iWeb automagically places the copied link in the URL field :
Repeated for other 3 links.
There's currently ONE hyperlink on your page (last updated 20140113) :
http://scullyfilm.com/scullyfilm/HOME.html
and it links to :
http://scullyfilm.com/casting/
which does not exist.

Similar Messages

  • Hyperlinks are not functioning after publishing

    I am running iWeb 3.0.4 and am publishing to my host site through GoDaddy.com. The hyperlinks work fine in iWeb itself, but after I publish the site and then go to the site to check it, some hyperlinks work, but most don't. It appears to be very random which hyperlinks are working and which are not. After Enabling hyperlinks in iWeb and checking the box Make hyperlinks active, I am choosing to Link to > One of my pages. All seems to be in order but again, after publishing the site, only some hyperlinks work but most do not. I have tried modifying little things in iWeb to see if it will help upon publishing - over and over and over again - but to no avail. I cannot stress how irritating this problem is, not getting the site to work after publishing!!! UGH!
    I've seen other posts regarding this issue and still have not found an applicable solution or at least one that is fixing my problem. Any other suggestions? Thank you.

    Thank you guys so much - specifically Old Toad, Cyclosaurus and Roddy - for helping me figure out what's wrong with my iWeb site! Just these little things you guys are suggesting are helping me slowly fix these subtle problems. I don't understand why these things that you guys are suggesting aren't explained somewhere in iWeb.
    Because of your help I have been able to most of the hyperlinks to work now, but still not all of them. Still seems like I have to do some tweeking and moving around some of the text. I can't believe how inaccurate and inefficient iWeb is!
    Anyway, Cyclosaurus - is there any way to shrink the size of the Canvas element so that I don't have to keep adjusting the text just to get the hyperlinks to work?
    Thanks again!!

  • Hyperlink is not working after publishing my site!

    I can fully activate my newly added page on my iweb site with no problem. I created a button and hyperlinked it to the newly created page. After I publish my site, the new button is NOT clickable. I created a new photo gallery page. I already have 1 photo page so when I clicked on that page, at the very top I am seeing a clickable link that will lead me to my newly created page. THIS IS NOT HOW I HAVE IT SET UP THOUGH! I have a button on my home page that if clicked, it will take you right to the new page! I tested it and it works! I go and publish my site and all the sudden it does NOT work!!! Anybody have a clue why this is?

    Turn on DB logging and see what the syntax is that CR tries to send to the Server. You can also enable crlogger ( search for this and you'll find a KBA on how to enable or DB logging component )
    First guess is the Date format is wrong, typically is the cause. try removing the date from the SQL and see if that works. Then try to add the selection formula in CR Designer and look at the SQL being generated
    Can be specific because you did not mention what DB you are using.
    Don

  • HELP-URL will not open after publishing!

    Please help me. I've read every forum discussion on this
    topic and still cannot get the web site to open after I publish and
    view in browser.
    I've used the drop down option and chose New and DE-selected
    the Continue playing option and still nothing.
    At the top I am enter the On Success and Open URL or file,
    then I enter the web address. I allow infinite attempts and on the
    Options tab i tried selecting and deselecting the pause until user
    clicks option and neither works.
    Can anyone please help me?! This project was due hours ago
    and this is the only glitch I could not fix.
    Is it the Next button- I removed the pause until user clicks
    and made it jump to next slide. :-{ I just don't know.
    Cheryl

    Hi Cheryl
    If you were to post this to a web server and test from there,
    I'd bet the URL works dandy. You are probably only seeing the issue
    on your PC.
    See if the link below helps you solve it.
    Click
    here
    Cheers... Rick

  • Top Nav buttons not working after publish, but works in app. WHY?

    I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
    <www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
    mini intel   Mac OS X (10.4.9)  

    They all work for me, try clearing your browser cache or using another browser.

  • HT4236 edited event name will not change on iPad

    I edited the spelling of an event name in my Iphoto App., but it will not change  after syncing with my Ipad.
    I tried deselecting the event and then sync the Ipad to delete the event on the Ipad. Then I selected the
    edited event and then synced the Ipad again. But the spelling of the event name did not change.
    Any Ideas?

    Oh yeah I have synched several times. I have PC with VISTA.  I think it has something to do with some titles being READ ONLY or something like that.  I need to find how to make them writeable.  No changes work on about 20 titles, the artist name? Genre? NOTHING will sync.  After sync all changes work fine accept for that 20 or so. titles just won't budge. every time.  If I go look on I tunes my changes are still there, just don't sync to Itouch.  It not the end of world but the more I upload the more I come across this.  I have about 900 full albums and maybe 20 is all that's doing it.   

  • Organizer will not open after I tried backing up photos on external hard drive on Mac. Editor opens, but not Organizer. This is a repost of a problem first reported 10 days ago.

    Organizer will not open after I tried backing up photos on an external hard drive on Mac. Editor opens, but will not launch Organizer. Have tried clearing the catalogs, but nothing works. This was first reported 10 days ago. Had to be out of the country for a week - without photoshop working-- and now I'm back with the same problem. Can someone please help, or do I dump this and try to get some help just reloading the program?

    jnrmendonca
    It had 4 years of photos and videos on it.
    To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
    Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
    ATR

  • Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.

    Why does the Iphone4 freeze up after downloading the IOS7.6 patch showing an ITUNE icon? The phone will not change screens for 4 hours.
    I Turn it off/on  and nothing changes.

    Hello bigboza,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • Lacie Rugged external drive will not show up after Yosemite update.

    Lacie Rugged external drive will not show up after Yosemite update.  It show up in disc utility I can't access it.

    I have the exact same issue. Have you had any luck with a solution?

  • B210a will not print after changing router\modem

    b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

    Good morning,
    Please use the second section of the following article to fix:
        http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

    My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

    Search this site for many reports of problems with GoFlex drives.

  • After 7.1.1 update my iphone5c time will not change if my phone is locked.

    I recently updated my iphone5c to 7.1.1. I then realized that my time will not change if my phone is locked. For example, if my phone clock says 2:00, the time will continue if I am using my phone. Say I use my phone until it is 2:30 and then lock my phone. It will still be at 2:30 when I use my phone again.I have turned it off and back on. I have restored it. I have turned it off of the "automatic" time zone and manually set my time. Nothing works. I don't know what else to do. Please help

    Hi there gwbell,
    You may find the troubleshooting steps in the article below helpful.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If you receive another error when restoring, take note of it, an take a look at the troubleshooting steps in the article below.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694
    -Griff W. 

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • Finder Icon will not change! Please help!

    I have been customizing the look of of my dockbar on my imac by giving all of my apps new ios 7 style icons.
    Yesterday I changed my Finder icon with no problem at all by going to:
    System→Library→Core Services→(right click 'Dock'→Show Package Contents)→Contents→Resources.
    And replacing the two png files (finder.png) and ([email protected]) with my new images. Yesterday I did this all perfectly fine and it changed to my new icon.
    However today I found a better finder icon and decided to change it again to this new version. However what ever I try it will not change to this new icon.
    I have followed the exact same steps as before, I have replaced my two png files from yesterday with my new ones and I have checked and re-checked that I am naming the files correctly, and that they are the right format etc.
    I have even deleted my original icons that I changed it to yesterday and emptied them from the trash but it is still there even after restarting and shutting down and rebooting.
    I have also tried going to terminal and typing 'killall Dock', it still returns with the same icon that I changed it to yesterday, even though I have deleted them from my hard drive.
    Please help me this is so frustrating and have wasted many many hours on this.
    (I am on mavericks btw)

    (I am on mavericks btw)
    iMac, OS X Mountain Lion (10.8.4)
    Then, update your profile/product info. BTW, I have nothing for the icon problem.

  • ITunes will not launch after upgrade--click, bounce bounce, nada

    iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
    then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
    iTunes current version
    on imac w/10.6.8

    I have the same issue.
    Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
    Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
    The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
    Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
    Thanks!

Maybe you are looking for