External (interlaced) video monitor via firewire?

DSP offers the option of previewing a project on an external (interlaced) videomonitor. But only through an s-video port, which my system is not equipped with... Is there a way to route the preview via firewire? If not, what other options are available?

Please don't take the following as contradictory with your wish, but the truth is that monitoring DVD content over Firewire DV wouldn't be a reliable way, since you would be looking at DV compression on top of MPEG-2 compression instead of a "final result". This may seem like exquisite semantics, but remember that DV NTSC has a 4:1:1 color grid and NTSC DVD is 4:2:0. You would get a very significative reduction in color information. It may or may not be "close enough" for your liking, but it wouldn't be really accurate.
Strange as it may seem, uncompressed boards (like AJA or Decklink) would be the ideal way. Because in this case uncompressed would mean no additional (or different) compression on top of the already compressed MPEG-2 streams.
But yes, both things should be possible. Ideally, MPEG-2 through uncompressed component or SDI. And Firewire DV as a quick and cheap workaround (amazingly, though, Decklink uncompressed I/O boards are cheaper than most DV gear!)
Did you guys send an enhancement request for this through the DVD Studio Pro feedback page on Apple's site? I did that with both hands
Message was edited by: Adolfo Rozenfeld

Similar Messages

  • I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    Hello twrate,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iMovie '11: If iMovie doesn’t recognize your camcorder
    http://support.apple.com/kb/PH2146
    Best of luck,
    Mario

  • IMovie playback on external monitor via FireWire?

    this seems like a pretty obvious question, but is it possible to play back an iMovie timeline on an external monitor/TV? i'm connecting my Titanium laptop to a Sony DV camera via FireWire, then directly from the camera to my TV via mini-jack/RCA cable. this works fine in Final Cut Pro, but i can't seem to get my iMovie to show up on the TV. how do you get iMovie to playback output via FireWire?
    thanks.

    In iMovie>Preferences>Playback do you have "Play DV project video through to DV camera" checked?
    For your information: Checking that checkbox sends the audio to the DV camera INSTEAD of to the Mac's speakers, so if you disconnect the camera, you will have no audio.

  • Video out via firewire

    Is color capable of outputing preview video through my DVCam deck via firewire? The option in the video out preferences seems to be grey out as are the other options in there.

    I had forgotten I'd posted this and I need to make a clarification.
    At the time of this posting, I'd been assured by Blackmagic Designs that Color would preview externally through their Intensity Pro card although in 8-bit video. Since the time of this posting and upon further query with BM tech support, I was told the Intensity Pro could not be used in this function.
    Sorry if there has been any confusion caused by my statement.
    Zeb

  • Sending video OUT via Firewire to my Camcorder FROM my computer?

    Hi all!
    Can I send video OUT from my comp. to my camcorder via Firewire. I have a camcorder that has Passthrough to use it as a bridge which I have used to hook up a vcr with. But Im not sure if I can send video OUT to the camcorder and record it on the tape? Any help would be great!
    Thanks, Retha
    iMac G5 & iBook Dual USB G3/Airport   Mac OS X (10.4.8)   iLife 6 & QT Pro
    iMac G5 & iBook Dual USB G3/Airport   Mac OS X (10.4.8)   iLife 6 & QT Pro
    iMac G5 & iBook Dual USB G3/Airport   Mac OS X (10.4.8)   iLife 6 & QT Pro

    Hi Retha!
    Yes, you should be able to do this. Use the Export command in the File menu of iMovie, and you will see that Camera is one of the options.

  • Any chance of syncing my 5G video ipdod via firewire ?

    If I was to get an older ipod firewire dock, and use the included adapter plate, can I sync (and charge) my 60G ipod/video via firewire ? I am running out of USB ports and don't have room for another hub, it's a pain plugging and unplugging. I do have an unused FW 400 port. Any advice would be appreciated, I do realize it is not officially supported. But will it work, has anyone tried ?
    Thanks.
    - Jay

    OOPS ! Wrong forum, I see my question is being rather hotly debated in another forum here. I am guessing the answer to my question is NO ! Sorry for the mis-post.
    - Jay

  • Capturing two video streams via firewire simutaneously

    I want to record two videos from two firewire cameras simutaneously to my hardrive directly. I have been able to record 1 stream into quicktime and one stream in imovie hd at the same time without any trouble. Just want to save the space the hd dv format video file takes up. Would buying another quicktime pro license allow me to set one quicktime for one camera and the other quicktime for the other camera. If i can do this would the record setting be best set on mp4 or h.264 if I am editing this in fcp. If this isn´t plausible, does anyone know of software out there that might solve my problem. Can you achieve this in FCP. Thanks Dave

    Just click on the QuickTime Player icon in the Applications folder. Command-C to copy it then Command-V to paste it. You now have two copies of QuickTime Player. Open one, set it's input, then open the other and see if you can set it's input separately.

  • Video input via firewire

    This seems to be a common question with only expensive solutions.
    It cost me $40.00 (Canadian) to export video from iBook to TV via 'Apples Video Adapter Kit'. But it's going to cost about $200.00 to get video into my iBook via 'MyTV' or 'EyeTV' type products?
    There's got to be a cheaper way but I can't find it.
    As far as I understand it's even more expensive, about $350.00 or $400.00 to input video through Firewire, but appearantly that's the only way to record live to iMovie.
    I bought an iSight, and it's wonderful, but it's not like I can take it camping without the iBook. lol
    Anybody have a cheap solution? I'd settle for video in USB at this point and worry about Firewire later.
    Or simply correct my ignorance.

    Hi Q_ball,
    What exactly are you trying to do? Do you have a video camera that you want to put the media on the iBook? Are you trying to get TV on your iBook?
    "It cost me $40.00 (Canadian) to export video from iBook to TV"
    Yes, this to mirror your iBooks display on a TV. The eyeTV is to take TV shows from the TV (analog, cable, etc) and put it on your iBook. The newest models let you also hook up your game console.
    "As far as I understand it's even more expensive, about $350.00 or $400.00 to input video through Firewire, but appearantly that's the only way to record live to iMovie."
    I am sorry, what are you talking about? Where do you get these figures? Are you talking about getting it from a video camera? Most video cameras have both FireWire and USB 2.0. iMovie works seamlessly with FireWire camcorders, but USB is a different story. Do you have a camcorder or are you in the market of buying one? I hope I don't sound rude, I just don't understand what you want. What are you trying to accomplish exactly?
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Video camcorder via firewire

    I am looking to buy a camcorder as a christmas gift for myself but am stuck deciding which to get. My main concern is that it must have a firewire connection. Price is not an issue ... I just need one that will connect via my firewire port on my G5.
    suggestions ... anyone?

    Get the sony handy cam dcr-trv460. It records on tape, but you can also (with a memory stick) Take digital photos. You can use iMovie to view the video recorded on the tape and all you need is the firewire cable. (It doesn't come with a firewire cable.) I purchased this camcorder last year and it is a good camera. It's easy to use, and it has good picture quality. It's a bit expensive though. about $350 in the US. I paid $400 for it two years ago. (august 2004) Hope you consider this camcorder as I'm an experienced camcorder user. P.S. You can get any brand camcorder you like, just not JVC. They get Terrible reviews on all their video products, mainly camcorders. -Trevor129

  • Send Video Out via Firewire 800?

    I have a macbook pro that has a firewire 800 port on it
    i also have a video switcher for video productions that takes a firewire 400 input as a video source
    i own a firewire 800 to 400 cable.
    is there any way to get video to send out of the macbook pro to go into the video switcher?
    when i connect the cables, nothing happens.
    please help!

    I had forgotten I'd posted this and I need to make a clarification.
    At the time of this posting, I'd been assured by Blackmagic Designs that Color would preview externally through their Intensity Pro card although in 8-bit video. Since the time of this posting and upon further query with BM tech support, I was told the Intensity Pro could not be used in this function.
    Sorry if there has been any confusion caused by my statement.
    Zeb

  • External drive not connecting via firewire thunderbolt

    I have a iMac at home and at work. This external drive connected via a thunderbolt/firewire adapter yesterday on my work iMac. When I try to connect on my home iMac it does not work. This drive is powered by the cable and I read that that is a problem but my trouble is that it did work on my work iMac yesterday but will not work on my home iMac today. I am using different adapters, is that the trouble? These macs are the same machine, one has more storage but otherwise the same. 

    I was thinking it might be an issue with the drive needing too much bus power. On the newer iMacs, USB provides higher bus power than FireWire. That might still be the issue, even if the drives supply their own power.
    Just one Firewire port on my iMac.
    I think it has two, but one is FireWire 400 and one is FireWire 800. So you only have one device plugged into those two ports?

  • MBP not detecting video camera via FireWire 800

    Hey all,
    I bought a MacBook Pro late 2008 mainly for video editing. Also, I purchased a 3rd-party FireWire cable because Apple doesn't distribute them here in Singapore (-_-).
    I've tried many times to connect my 2 video cameras to my Mac and NONE of them turn up in iMovie. It can't possibly be the cable because the store sells them to many people because Apple doesnt distribute them and none came back complaining it doesn't work. And us Singaporeans will go to lengthy methods to get back our money if products we bought don't work.
    My 2 video cameras are both Panasonic and they are
    NV-GS90
    NV-MD10000
    The first one is a small one while the second one is a professional camera.
    If the cameras can't connect then my whole purpose of purchasing the Mac is defeated. I called Panasonic and they said that it should work fine with the Mac, no drivers needed (Applecare told me to check with them for drivers).
    Anyone can provide a solution? T-T

    While you were in the store, did you connect any other FireWire devices to your computer to find out whether or not your FireWire port is working? You should certainly do that at the first opportunity, now that you've effectively eliminated a bad cable as a possible cause of your problem.
    You may also want to run the Apple Hardware Test that you'll find on one of the discs that were shipped with your MBP. That may be able to identify a problem with your FireWire port.
    Apple generally doesn't make or sell cables — there's not enough money in them. Apple leaves that market to third-party vendors, who supply them at lower prices than Apple could or would. And FireWire 800 is far from new: all or most new Macs have had FW800 ports for more than five years now.

  • Missing video device via firewire

    hey all,
    my fc 5.0 has a weird problem.
    yesterday, i was batch capturing from my panasonic nv-gs280 (connected via the front fw port), and everything went fine. but as i was trying to edit the final version to video, suddenly, final cut didn't find my camera (missing video device). i tried plug/unplug, restart, etc. several times, but it just didn't work. i also tried print to tape, but the camera didn't get the signal. i also made an attempt to capture, but it failed (same problem).
    could anybody please help me?
    thanks,
    b
    ps.: OSX and QT are up-to-date.
    mac pro 2.66, ibook g4   Mac OS X (10.4.7)   fc 5.0

    Your Mac Pro needs to be running FCP 5.1.1... it's a crossgrade and not free (but very inexensive)...
    http://www.apple.com/universal/crossgrade/
    Jerry

  • Simultaneous Recording of Video & Audio via firewire

    I just got a Belkin firewire hub and it works great in terms of getting video from my DVcam and audio from my Alesis MultiMix 8. What I've had to do, though, is record the video into iMovie while recording the audio into Garageband...and then syncing the two later, which is an onerous process.
    My question is: Is there a way to get iMovie to lay down an audio track from the firewire input [which actually has some great quality] while live recording/importing from the cam? That's my wish.
    Arigatou gozaimasu!
    AlBook 17/1.6   Mac OS X (10.4.9)  

    The 2 replies so far are interesting in that I have found both to be true; while mixing is not what I am after, I do want iMovie to ignore the cam audio and take the digital audio from the Alesis interface. Right now I record the audio to Garageband and copy the exported mp4 back into iMovie, syncing with the video track and turning off the audio iMovie origninally recorded. It's a little awkward.
    Imagine iMovie and the Mac acting as a sort of digital switcher, enabling the user to choose which audio input to use while recording. Innovative thinking-- I wonder if they're listening in Cupertino?
    Looking forward to more opinion/advice on this problem...and appreciating your collaboration thus far.
    AlBook 1.6   Mac OS X (10.3.9)  

  • External video monitor not supported?

    I started to use color APP just recent and soon found out that Color does not support live preview to my external video monitor via Firewire, I have 2 devices to choose, DSR11 or a DAC 10 ( DV Converter ), firewire to Component.
    I hope that Apple resolve this issue fairly quick, many color users like me that don't have an IO card like AJ Kona or Decklink, color will be useless without an external video monitor for color correction.
    Any input will be appreciated.
    Sigi

    Because of the reduced colorspace required for DV, I'd wager it's unlikely that Color will ever be made to go out via FireWire to a DV deck or DAC.
    Decklink Intensity - $249 or $399? is a potential alternative...
    Patrick

Maybe you are looking for

  • ITunes deleted all the music on my ipod - help!

    I purchased a fourth generation black and white screen 20GB ipod that had some music on it. I've been listening to the music for about a week without bothering to connect up to my computer. Today I installed the software that came with the ipod and u

  • Adobe Acrobat X Pro - submiting just one page of many

    Hi, I was hoping someone could help me. I have been hitting my head against a wall for hours. I have created an Adobe form in Adobe Acrobat X Pro, It is five pages long and I want to submit only page 5 via email. I have tried the Field selection opti

  • Importing photos to my ipad via the camera connector kit  How do I do this

    I cannot import photos to my ipad via the camera connector kit The photo app does not say import anywhere  How do I do this

  • Can't get updates from AppStore

    I want to update xcode after upgrading to OS X Mavericks and although I am signed into AppStore with my Apple ID, it asks for the password of the previous owner of the mac, which i don't have. How can I solve this issue? Do I have to uninstall AppSto

  • PBS Kids no longer available for Apple TV?

    Running the latest software for the Apple TV (2010), and wake up this morning and there's no longer a PBS Kids app anywhere to be found as a channel...  Anyone know or experience this?  My daughter needs her Sesame Street... or else! Thanks