External iSight - no sound with Mac mini 2011

Hello,
I'm trying to connect External iSight camera to Mac mini 2011 (using FW400 -> FW800 adapter cable) but I can't get microphone sound to work...
When I open system prefs>sound>input, it shows iSight is connected but system will freeze for a while (like it's looking for iSight) on openning.
When I try open Skype video preferences, it shows me video from iSight with no problem, but sound doesn't work.
Can anyone give me some advice?

You're welcome.
(1) Your new info indicates to me that there is probably something wrong with your cable(s), adapter(s), Mac mini's Firewire, or your external iSight itself.
You can eliminate most of these by troubleshooting with other cables, adapters, Firewire devices, and Macs as suggested in the info from my earlier link.
If no Firewire device you test on your Mac works with any connecting cable, resetting the Mac's Firewire bus may help. Apple's "how-to" article has been archived in this link. (This link may be slow to load.)
If you have trouble displaying the archive page, here is the pertinent extract on how to reset the bus:
... If the issue persists, try these steps:
Shut down the computer.
Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
If an individual third-party device leads to the issue, contact the manufacturer for more information and further assistance.
NOTE: Some users who try FW reset forget that "all" cables include the power cable. Disconnecting power is important.
(2) If your troubleshooting shows that your external iSight itself is the problem, you can decide whether you want to have your old serviced. If you do not have access to a local Apple-Authorized Service Provider, you can obtain cost and Apple contact info from http://www.apple.com/support/isight/service/
(3) Rather than spend more money on your old iSight, you may decide to consider a new webcam. A new Mac compatible USB connected cam with a current warranty will be a faster fix, and it may be lower cost. Some examples are at http://mac-compatible-web-cam.com. Moreover, compatible USB connected cams are not subject to all the same conflicts that sometimes effect external iSight.
Unless you already have a separate microphone for your mini, you can decide whether to buy separate mic or look for a new camera that has an inbuilt mic.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Similar Messages

External Isight Not Working With Mac Mini

Hello
Thank You for taking the time to look at this for me , I have 2 external isight cameras and i can get neither one to work with my late 2009 mac mini running snow leopard , although they both work on the latest mac mini (running lion) , When connected they open Ichat Av but i cant get a video from them.
Thanks In Advance

27/10/2012 11:10:33
com.apple.launchd[1]
*** launchd[1] has started up. ***
27/10/2012 11:11:02
com.apple.launchd[1]
(com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
27/10/2012 11:11:05
com.apple.WindowServer[79]
Sat Oct 27 11:11:05 Jordan-Bakers-Mac-mini.local WindowServer[79] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
27/10/2012 11:11:34
com.parallels.vm.prl_naptd[129]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
27/10/2012 11:11:34
com.parallels.vm.prl_naptd[129]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
27/10/2012 11:11:34
com.apple.launchd.peruser.501[160]
(com.kodak.BonjourAgent) Unknown key for string: Kodak Version
27/10/2012 11:11:34
com.apple.launchd.peruser.501[160]
(com.kodak.BonjourAgent) Unknown key: Kodak Version
27/10/2012 11:11:34
com.apple.launchd.peruser.501[160]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
27/10/2012 11:11:38
[0x0-0xa00a].SoftwareUpdateCheck[173]
SoftwareUpdateCheck: network unreachable
27/10/2012 11:11:38
com.apple.launchd.peruser.501[160]
([0x0-0xa00a].SoftwareUpdateCheck[173]) Exited with exit code: 3
27/10/2012 11:11:38
com.apple.launchd[1]
(com.apple.suhelperd[175]) Exited with exit code: 2
27/10/2012 11:11:43
com.parallels.vm.prl_pcproxy[190]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
27/10/2012 11:11:43
com.parallels.vm.prl_pcproxy[190]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
27/10/2012 11:11:43
com.apple.launchd.peruser.501[160]
(com.apple.Kerberos.renew.plist[187]) Exited with exit code: 1
27/10/2012 11:11:44
WitnessUserAgent[191]
WitnessUserAgent r304 started for user 501
27/10/2012 11:11:54
WitnessUserAgent[191]
Connected to daemon: <BUDaemonServer: 0x10ea50>
27/10/2012 11:12:26
uclocator[192]
Core Location could not establish your current location
27/10/2012 11:12:26
uclocator[192]
Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
27/10/2012 11:12:39
System Preferences[217]
.scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
27/10/2012 11:12:59
com.apple.launchd[1]
(com.apple.xprotectupdater[34]) Exited with exit code: 255
27/10/2012 11:13:11
com.apple.launchd.peruser.501[160]
(com.apple.AirPortBaseStationAgent[189]) Exited: Killed
30/10/2012 16:51:29
com.apple.launchd[1]
*** launchd[1] has started up. ***
30/10/2012 16:51:55
com.apple.launchd[1]
(com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
30/10/2012 16:51:56
com.apple.WindowServer[87]
Tue Oct 30 16:51:56 Jordan-Bakers-Mac-mini.local WindowServer[87] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/10/2012 16:52:00
com.apple.launchd[1]
(com.apple.xprotectupdater[33]) Exited with exit code: 252
30/10/2012 16:52:10
com.parallels.vm.prl_naptd[136]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
30/10/2012 16:52:10
com.parallels.vm.prl_naptd[136]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
30/10/2012 16:52:10
com.apple.launchd.peruser.501[160]
(com.kodak.BonjourAgent) Unknown key for string: Kodak Version
30/10/2012 16:52:10
com.apple.launchd.peruser.501[160]
(com.kodak.BonjourAgent) Unknown key: Kodak Version
30/10/2012 16:52:10
com.apple.launchd.peruser.501[160]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/10/2012 16:53:35
com.parallels.vm.prl_pcproxy[196]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
30/10/2012 16:53:35
com.parallels.vm.prl_pcproxy[196]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
30/10/2012 16:53:36
WitnessUserAgent[197]
WitnessUserAgent r304 started for user 501
30/10/2012 16:53:36
com.apple.launchd.peruser.501[160]
(com.apple.Kerberos.renew.plist[193]) Exited with exit code: 1
30/10/2012 16:53:50
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:50
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:52
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:52
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:52
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:53
WitnessUserAgent[197]
Connected to daemon: <BUDaemonServer: 0x401100>
30/10/2012 16:53:54
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:55
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:53:55
Photo Booth[182]
*** <QCNodeManager | namespace = "com.apple.QuartzComposer" | 391 nodes>: There is already a node registered with name "/userbackdrops"
30/10/2012 16:54:25
uclocator[198]
Core Location could not establish your current location
30/10/2012 16:54:25
uclocator[198]
Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
30/10/2012 16:55:07
iChatAgent[225]
[Warning] [AIM] Could not change my visibility to 0
30/10/2012 17:01:48
[0x0-0x1c01c].com.skype.skype[258]
WirelessAttach: IOServiceOpen error: e00002c7
30/10/2012 17:01:48
[0x0-0x1c01c].com.skype.skype[258]
WirelessAttach: IOServiceOpen error: e00002c7
30/10/2012 17:01:49
[0x0-0x1c01c].com.skype.skype[258]
WirelessAttach: IOServiceOpen error: e00002c7
30/10/2012 17:01:49
[0x0-0x1c01c].com.skype.skype[258]
WirelessAttach: IOServiceOpen error: e00002c7
30/10/2012 17:04:01
iChat[222]
------ startPreview: previewing: 2
30/10/2012 17:04:23
iChat[222]
------ startPreview: previewing: 2
30/10/2012 20:38:13
com.apple.launchd[1]
*** launchd[1] has started up. ***
30/10/2012 20:38:45
com.apple.launchd[1]
(com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
30/10/2012 20:38:48
com.apple.WindowServer[78]
Tue Oct 30 20:38:48 Jordan-Bakers-Mac-mini.local WindowServer[78] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/10/2012 20:38:48
com.apple.launchd[1]
(com.apple.xprotectupdater[33]) Exited with exit code: 252
30/10/2012 20:39:07
com.parallels.vm.prl_naptd[129]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
30/10/2012 20:39:07
com.parallels.vm.prl_naptd[129]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
30/10/2012 20:39:07
com.apple.launchd.peruser.501[158]
(com.kodak.BonjourAgent) Unknown key for string: Kodak Version
30/10/2012 20:39:07
com.apple.launchd.peruser.501[158]
(com.kodak.BonjourAgent) Unknown key: Kodak Version
30/10/2012 20:39:07
com.apple.launchd.peruser.501[158]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/10/2012 20:39:11
com.parallels.vm.prl_pcproxy[184]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
30/10/2012 20:39:11
com.parallels.vm.prl_pcproxy[184]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
30/10/2012 20:39:11
com.apple.launchd.peruser.501[158]
(com.apple.Kerberos.renew.plist[181]) Exited with exit code: 1
30/10/2012 20:39:11
WitnessUserAgent[185]
WitnessUserAgent r304 started for user 501
30/10/2012 20:40:09
com.apple.launchd[1]
*** launchd[1] has started up. ***
30/10/2012 20:40:35
com.apple.launchd[1]
(com.parallels.vm.prl_naptd) Unknown key for boolean: SuccessfulExit
30/10/2012 20:40:36
com.apple.WindowServer[87]
Tue Oct 30 20:40:36 Jordan-Bakers-Mac-mini.local WindowServer[87] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/10/2012 20:40:38
com.apple.launchd[1]
(com.apple.xprotectupdater[33]) Exited with exit code: 252
30/10/2012 20:40:49
com.parallels.vm.prl_naptd[128]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
30/10/2012 20:40:49
com.parallels.vm.prl_naptd[128]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
30/10/2012 20:40:49
com.apple.launchd.peruser.501[159]
(com.kodak.BonjourAgent) Unknown key for string: Kodak Version
30/10/2012 20:40:49
com.apple.launchd.peruser.501[159]
(com.kodak.BonjourAgent) Unknown key: Kodak Version
30/10/2012 20:40:49
com.apple.launchd.peruser.501[159]
(com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/10/2012 20:40:50
com.apple.launchd.peruser.501[159]
(com.apple.Kerberos.renew.plist[182]) Exited with exit code: 1
30/10/2012 20:40:50
com.parallels.vm.prl_pcproxy[185]
QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory
30/10/2012 20:40:50
com.parallels.vm.prl_pcproxy[185]
QFileSystemWatcher: failed to add paths: /Library/Managed Preferences
30/10/2012 20:40:50
WitnessUserAgent[186]
WitnessUserAgent r304 started for user 501
30/10/2012 20:40:52
WitnessUserAgent[186]
Connected to daemon: <BUDaemonServer: 0x10f390>
30/10/2012 20:41:30
uclocator[187]
Core Location could not establish your current location
30/10/2012 20:41:30
uclocator[187]
Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
30/10/2012 20:42:21
com.apple.launchd.peruser.501[159]
([0x0-0x11011].com.apple.iChat[209]) Exited: Terminated
30/10/2012 20:44:07
iChatAgent[230]
[Warning] [AIM] Could not change my visibility to 0
30/10/2012 20:44:41
iChat[228]
------ startPreview: previewing: 2
30/10/2012 20:45:26
com.apple.launchd.peruser.501[159]
([0x0-0x18018].com.apple.iChat[228]) Exited: Killed

Anyone know how to get external iSight camera sound to function on 2011 Mac mini with Lion?

I recently helped my Mom upgrade from an older Mac mini to a 2011 model, and the external iSight camera shows video but has no sound. She can see and hear me through both iChat and FaceTime, but I can only see her.
I have checked the source for the mic in FaceTime and iChat preferences as well as the System Preferences, and I can see the monitor responding to input, but it is not sending the sound.

(1) You're welcome! We will be eager to see how it works for you.
(2) If iChat can't access your external iSight, there is something wrong.
• If Apple's http://support.apple.com/kb/HT2090
   suggestions do not help you, continue with the following.
• Use Disk Utility to repair permissions and then
   download and apply the 10.7.2 Combo Update:
     http://support.apple.com/kb/DL1459
• Repair permissions again immediately following the system restart
   that completes the Combo update.
(3) If your mini does not have a Firewire 400 port, also check
     your connections. Options I know for ways to connect
     a FW400 external iSight to a FW800 Mac port:
• This Firewire 400-800 cable can work: http://store.apple.com/us/product/TU942LL/A (I use this one.)
• Some report that this low-priced alternative cable works:
http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
• To use your FW400 6pin-6pin cable, you can use
    a 6pin-9pin adapter like one of these: http://tinyurl.com/ydsbb6m
   (I successfully use this one, too.)

No external speaker sound with mac-mini running bootcamp win7 64

Hi,
I am unable to get external sound working with mac mini (september 2011) running windows 7 64 on bootcamp 4 (Lion). Drivers appear OK in device manager. Running seperate driver exe from bootcamp library results in a message that the best driver is working. Any suggestions? How do I know which audio driver I need? Where, specifically, can I download the correct driver? I have seen a reference to cirrus logig 4206B driver working but I can find no such driver anywhere. I can't figure out how to search for drivers on cirrus web site. Please help.
Thanks,
b

Ok, the solution in my case was to go back to MacOS, run the BootCamp assistant again, and have it re-download all the Windows drivers. Back in Windows 7, uninstall BootCamp, then reinstall. Now all the drivers work.
Apple has apparently updated/fixed their 64 bit drivers since I last tried to make it go. I would have thought that Apple Software Update (on Windows) or Windows Update would have picked up the newer drivers, but they didn't.

Does HP W2207h monitor with Mac mini 2011?

I have a HP W2207h monitor with HDMI and VGA ports, will this work with the new Mac Mini 2011?

You can use HDMI cable with HP w2207h directly,No need for other cable. but please follow these step.
1.Find LCD tv to set up first step.
2.Connect HDMI cable to LCD TV(i use Samsung) and adjust to HDMI source.
3.Open Mac mini.
4.Open system preference.
5.Click "display" you will see that the primary setting is :1680*1050 that HP monitor did not support.
6.Unplug HDMI cable from LCDtv (no need to shut down) and plug into HP w2207h.
7.the screen still blinking, it is ok.
8.On HP monitor, Push down button "Select" and "+" and the same time and hold it.
9.Use mouse or down button on keyboard to choose screen resolution to be "1600*900"
10. Then the screen will not blinking and you can use your lovely HP w2207h
if you want a high resolution on screen.
1.Buy new LED monitor that support 1680*1050 resolution.
2.Buy Mini displayport to DVI for digital signal Mini>DVI>HDMI.
Enjoy your MAC. because i am new Mac user with my MAC mini 2011
[email protected]

Target Display Mode iMac 27 mid 2011 with Mac Mini 2011 bootcamp

Hello,
I can't seem to use Target Display Mode with Bootcamp.
My configuration:
Imac 27" mid 2011 with osx 10.8.4
Mac Mini Server 2011 with osx 10.8.4, bootcamp 5 and Windows7
Both are connected via Apple genuine Thunderbolt cable (2m).
When I boot the Mac Mini into OSX then Target Display Mode works perfectly and I can see the osx installed on the Mac Mini on the iMac display.
However, when I reboot the Mac Mini into Bootcamp (windows7 x64) I can't put the iMac in Targt Display Mode and get to see Windows 7 on my iMac screen.
http://support.apple.com/kb/ht3924#8
The following article says that this should work, however once I reboot osx on the Mac Mini the iMac leaves Target Display Mode immediatly and will not return to Target Display Mode.
Any advice? I contacted Apple Support and a Sr. Enginner said it should be supported and he's checking with a higher tier.
Thanks

Yes, it does.
(110549)

Can i connect an external 3tb hdd to my mac mini 2011

I think the title discribes my problem prety well, please be sure that your awnsers are tested .

The size of the drive is a non-issue. Connection interface
(Thunderbolt, Firewire, USB) and the manufacturer are the
prime concerns. Some work better than others and some
just don't play nice at all.
This is personal experience only, but I would stay away from
Western Digital external drives. I have never had any good
luck with them over the years. Perhaps they are better now,
but I will never take a chance with them ever again.

Isight firewire mac mini 2011

hi
is it possible to connect a apple isight firewire on a mac mini 2011 with an adaptator firewire 400-800 ?
any one try this ?
thanks (and sorry for my bad english )

Hi,
Yes.
However it is about the type of adapter that you need.
See EZ Jim's Post here
9:29 PM Sunday; September 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Purchase Help: iMac 2011 vs Thunderbolt Display Mac Mini 2011

Hello,
I purchased Thunderbolt display with Mac mini 2011. I experienced a lot of graphic issues with Mac mini when I connected to Thunderbolt display. I exchanged Mac mini 3 times but the same result. The Thunderbolt display is working fine with MacBook Pro 2011.
I'm going to return both Thunderbolt display and Mac mini and interested to get iMac. Is there any differences between iMac and Thunderbolt display + Mac mini 2011? i.e., in technology, release update cycle, features etc? My main intention to buy Thunderbolt display is to use with both Mini and MacBook Pro.
Any further help would be greatly appreciated. Thank you.

I don't know why you are surprised at the similar sizes of the 27-inch iMac, the 27-inch Cinema Display, and the 27-inch Thunderbolt display. The 27-inch iMac came first, and the others are "monitor-only" products that seem to use the same LCD panel(s).
As to a current 27-inch iMac vs. a current 27-inch Thunderbolt display,
* The iMac serves as a standalone computer, and can also serve as a dumb monitor for an external computer that has a Thunderbolt port. When operating as a dumb monitor, the iMac only serves as a monitor; it does not offer breakout connections to USB 2.0, Firewire 800, or Gigabit Ethernet.
* The Thunderbolt display is a dumb monitor for an external computer that has a Thunderbolt port. It also serves as a breakout box for USB 2.0, Firewire, 800, and Gigabit Ethernet connections (which is convenient if your main machine is a laptop; you can do all of your docking with one Thunderbolt cable + one power cable).

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

Is isight external camera compatible with mac mini?

I just bought an old isight camera from ebay. I used a firewire 800 to 400 cable to connect to my late 2012 mac mini. I test to cam using facetime but the screen said no camera connected. So I connect the isight with my old macbook to test the camera, and the connection is fine.
I wonder if the old isight cam is still compatible with mac mini. If so, that might be the problem of the fire 800 to 400 cable.

Other users, including myself, could not get the barrel iSight camera to work on the 2012 Min with Mavericks. It did work on my late 2009 Mini except the mic did not work. It does work on my late 2013 Mac Pro desktop except again, that the mic does not work.

Can someone tell me how to install webcam isight A1023 on my mac mini with OS 10.8

Please help me to install my webcam isight A1023 on my mac mini with OS 10.8

All you need do is follow the instructions in the iSight User Guide (Manual) that came with your old external iSight.
Neither your system info nor your post identify which Mac mini you use. If your mini is a newer model that has only a Firewire 800 port, and, if you don't already have one that works, you will need a FW400-800 adapter or cable.
Be aware of Possible Conflicts with Firewire iSight. If you encounter such problems with your mini system and cannot resolve them, you can workaround the Firewire issues by using a Mac compatible USB external camera.
Message was edited by: EZ Jim
Mac OSX 10.8.5

Confirm iSight with Mac mini (early 2009)?

Can someone please confirm that an iSight (external Firewire 400) camera actually works with their Mac mini (early 2009)? Of course, that will need a Firewire 400 to Firewire 800 adapter.
I can't get mine to work. I've used two different iSight cameras that work on other (older) Mac minis. I've used the cable that comes with the iSights and another Firewire 400 cable.
When I plug it in the iSight makes a noise and the light comes on briefly (for a second or two) and then it goes off. No applications that require a camera (like Photo Booth) see the camera.
I'm worried that this Mac mini may not have enough power to run the iSight, which is probably also an ominous sign for unpowered external Firewire drives.
Thanks for any assistance.
Cheers,
Ashley.

Well, it seems that I have found my sad answer!!! The very same issue. New MAC MINI, Old and nice isight camera, which works perfectly well with my powerbook G4 even now, but not with my new mac mini.
I am sure I have the correct cable (it allowed migration of my entire admin account from my powerbook to my new mac mini), but it still does not work between isight and new mac mini.
Having said this, I certainly remember plugging my isight to my new mac mini using this new adapter cable (800-400mb/sec - orange flat one) and it was working at least i saw my image.
I do not remember which application i used (skype or ichat) but i certainly remember my satisfaction with my new cable. Since then i did not need video conversations, but yesterday i needed one, and i realized that my isight is not recognized by my macmini any more!
I am saying this because it might not be only a power issue, it could be that multiple updates of i sight on my old powerbook passed in block to my new mac mini and this allowed isight working. In contrast, those update are not installable on Leopard operating systems.
I think, since i saw those two devices (isight and new mac mini) working together nicely, i deleted my entire migration account (having found a different way of keeping only absolutely necessary things on my new mac mini). I was thinking about this all day today. Can this be it? drivers issue? the non-installable on Leopard updates that otherwise can be migrated en-block from the old system?
I am sorry to confuse you all, if I did, but what do you think about it please?

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

External iSight - no sound with Mac mini 2011

Similar Messages

Maybe you are looking for