External keyboard only works after reboot with Port Replicator III Plus

The problem is that when I boot the notebook, the external PS/2 keyboard doesn't work. When I reboot the keyboard flips on and then I can use it.
This problem occurs on a Toshiba Tecra notebook with a Advanced Port Replicator III Plus. I've used several keyboards, so that isn't the problem. I've changed a value in the bios which is used for USB devices (mouse/keyboard). I disabled the option, because I use a PS/2 mouse and keyboard, but the problem isn't solved. I hope someone has an answer to this problem.

Hello
I presume that there is something wrong with docking procedure and touchpad. Try to disable the Touchpad while the Notebook is docked.
Try also to install mobile extensions again.

Similar Messages

  • USB external audio only works after reboot

    I have a EMU 0202 USB soundcard in order to be able to hear sound in my late 2008 macbook (because the mini-jack from the headphones broke inside the laptop. but this is another story). The problem is that in order for the laptop to detect this soundcard I have to reboot OSX. If I disconnect the soundcard and connect it again, it won't be detected until I reboot my computer again. Thing is I'm tired of rebooting so often just to have sound. Do you have any idea on why is my Macbook only able to detect the soundcard when booting or how could I fix this?
    Thanks in advance.

    I see the latest driver is from 2008 (http://www.emu.com/support/files/download3.asp?Centric=1005&Platform=2&File=596), and is supporting Leopard. Perhaps the driver is not fully compliant with Snow Leopard...? Try uninstalling your driver, and installing the one mentioned, and if that does not work, try contacting EMU.
    Kind regards:
    Espen.

  • Is Advanced Port Replicator III plus compatible with Portege R200

    I just ordered a new Portege R200 and the above port-replicator... however, I note that the R200 isn't listed in the supported notebooks list for that replicator! Can anyone confirm if I have made a mistake and need to change the order?
    Will

    I have visited the Options & Accessories area on the Toshiba European site and as you already said the Portg R200 is not listed in the list of compatible notebooks.
    So I presume the Advanced Port Replicator III plus (PA3474E-1PRP) does not support the Protg R series.

  • Advanced Port Replicator III Plus Driver/Frimware

    Hi,
    I am having a number of problems with my Poretege M300 on Advanced Port Replicator III Plus. Some Fn keys aren't working and I'm not able to get the correct screen display on my external monitor.
    Question: are there drivers for the Port replicator? I don't have a CD or any other installation media.
    Thanks, Richard

    Pedro,
    Thanks for this.
    I have reinstalled the Common Modules and now when I undock the Fn F5 key works K to toggle between screens. I guess this is disabled when docked?
    But I still can't use the Toshiba Assist and Presentation buttons, although I have also reinstalled the drivers for these as well.
    The M300 supports the external screen resolution OK, but I have to re-arrange my desktop every time I dock and use the higehr resolution external screen.
    Richard

  • Where can I download a user manual for Advanced Port Replicator III plus

    Where can I download a user manual for this?
    I have searched the download manuals section but cannot find a reference to this.
    Thanks for any help

    Seems this manual is not available in the Toshiba user manual page.
    But usually you should receive a user manual together with the Advanced Port Replicator III plus.

  • Re: Satellite A50 - keyboard only works after standby

    I've a problem with my notebook.
    When you load windows xp the keyboard does not work.
    Keyboard work again only if you put on stand-by the notebook and then you restart it.
    What is the problem? Help me please and thank you in advance.

    Hi!
    This is really strange but it would be interesting to know if you have the same issue with an external keyboard.
    In my opinion you should try to use the Toshiba recovery disk and reinstall Windows. This should solve the problem.
    Last but not least try to update the BIOS.
    You can find it on the Toshiba website: http://eu.computers.toshiba-europe.com/
    Bye

  • Touchpad only working after reboot

    Hello everyone,
    I have not so recently switched to Arch on my Lenovo Thinkpad Twist S230U. Everythink is working pretty good or I have at least solutions I can happily live with so far.
    One issue that is bugging me is the fact, that after a complete shutdown and boot neither the touchpad nor the trackpoint are working. If I just do a quick reboot, everything works great.
    Another thing I noticed is that on the boots where the touchpad does not work, when I type in my password, the first keypress is not recognized sometimes.
    The system is up to date and I just did a bios update, as it occured to me, I haven't done that since the purchase of the laptop. This did not change anything.
    I have put up with this problem for quite some time now and just ignored it because I mostly suspend my laptop and never have problems after resuming, always hoping I would be surprised by a working touchpad one day after a kernel update.
    The output of xinput after a "failing" boot:
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ Atmel Atmel maXTouch Digitizer id=9 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Integrated Camera id=10 [slave keyboard (3)]
    ↳ ThinkPad Extra Buttons id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    The output of xinput after a "successful" boot:
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
    ⎜ ↳ TPPS/2 IBM TrackPoint id=14 [slave pointer (2)]
    ⎜ ↳ Atmel Atmel maXTouch Digitizer id=9 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Integrated Camera id=10 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
    ↳ ThinkPad Extra Buttons id=13 [slave keyboard (3)]
    The output of dmesg after a "failing" boot:
    http://pastebin.com/jXzegW52
    The output of dmesg after a "successful" boot:
    http://pastebin.com/5DwreMVQ
    Greetings
    Felix
    Last edited by Lurchwart (2015-05-18 09:57:45)

    OK, problem solved
    I just run arch in runlevel 1 and replace in file /etc/X11/xorg.conf.d/10-synaptics.conf option        MatchIsTouchpad "off"         MatchIsTouchpad "on".
    Now everyhing working, but I still don't know how disable touchpad
    OK, everything is good now SOLVED
    Last edited by xorgx3 (2012-03-28 12:07:21)

  • Mouse and Keyboard stop working after reboot

    So far the computer is working great except for the fact everytime you reboot the keyboard and mouse stop working... I did a clean format x2 and put the service pack on and I am still getting the same problem.
    Anyone have this problem or something similair ? Any ideas ?
    Thanks in advance :-)

    The problem is not your S/W install. It's with the MSI Motherboard. Your best bet is to ask MSI when a fix will be available, or go buy a different board.

  • USB 3.0 External HDD only works on 1 USB port, rMBP 13

    Hello all,
    Last night I had a scare thinking that my WD MyPassport was corrupt because only one of my 3 partitions were showing up. I went into Disk Utility and attempted to mount the disk, only to get a message that I must repair it. I then realized that I plugged it into the right side of the computer, which is opposite of which I usually do. I removed the hard drive and switched ports, only to see that all three partitions magically appeared. Is there a reason this happened? Is there something wrong with my computer, or is this user error? I've never experienced this before.

    Off the top of my head there could be two reasons for this. One is that the USB port is malfunctioning. The other is there is a chance the HD is pulling more power then the USB port can supply. One USB port will tend to be slightly higher power than the other. Is the HD powered by the computer or an external power supply? Was there anything plugged into the other USB port that may have been drawing power? It is best to not rely on USB bus power to power external hard drives. If the drive does not have its own power supply consider getting a powered USB hub. This should help.

  • Passcode lock only works after reboot

    After a reboot I am prompted for the passcode. After that I never get prompted again - even though passcode lock is set to on, This is happening after I had to restore my iPhone from 4 months ago due to the Beta IOS (that I had taken back in July) had expired, leaving me no other option.
    Other than resetting to factory settings what else is there?

    Sorry, my require passcode had been reset to 15 minutes.  Problem resolved after changing to immediately.

  • Tecra A8-103 Port Replicator III does not work on WIndows 7

    Hi 2 all, 
    My Tecra A8-103 worked very fine with docking station: Advanced Toshiba Port replicator III plus.
    It worked well on Windows Vista. 
    but, after Windows 7 was installed, docking station does not accept/recognize microphone and stereo input ??
    I mean, when I connect microphone jack and jack from external speakers into docking station, there is no sound ??
    are there any drivers perhaps ? to be installed for Windows 7 ? 
    thanks in advance 
    Zoran 

    I have a MacMini that is a intel core solo and has the DVI port not the mini-DVI.
    I was able to load win7 but only after connecting the MacMini to an LCD monitor via DVI-to-VGA converter that came with my mac mini.
    I am running snow leopard on the mac side and the video works great in 1080p via DVI cable direct to my DLP tv. but when I loaded win7 the tv couldn't display the video feed. The tv read "not compatible data". The DLP tv has a VGA input and win7 is running fine on it.
    I am looking for a way to enable the video card to give the same quality on the win7 side as the OS X side, so that I can go back to the DVI cable and the 1080p I was getting in snow leopard.

  • External monitor only works with clam shell open

    external monitor only works with clam shell open

    Are you using the method in this Apple article? If you do, it should work.
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display

  • Laptop Keyboard doesnot work after grub

    Hello,
    My laptop's keyboard stops working after i select distro from grub menu. I've did huge amount of search but i'm hopeless right now.
    I'm using a usb keyboard and it works fine, my laptop's keyboard also works fine in windows and boot menu.
    I have x86-input-evdev and -keyboard for sure.
    I'm using SLIM+ i3w if you need this!
    What to do and where to go?!
    any way if u need my dmesg here it is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.3-1-ARCH (tobias@testing-i686) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Fri Jul 26 17:13:15 CEST 2013
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005f68ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000005f690000-0x000000005f699fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000005f69a000-0x000000005f6fffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000005f700000-0x000000005fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0005fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.3 present.
    [ 0.000000] DMI: LG Electronics LS75-25JLCE5/HUNTER, BIOS HURFSF07 09/28/2005
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x5f690 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E3FFF uncachable
    [ 0.000000] E4000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 040000000 mask FE0000000 write-back
    [ 0.000000] 2 base 05F700000 mask FFFF00000 uncachable
    [ 0.000000] 3 base 05F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] PAT not supported by CPU.
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x00849000, 0x00849fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x3750f000-0x377fda6a]
    [ 0.000000] Move RAMDISK from [mem 0x37a12000-0x37d00a6a] to [mem 0x3750f000-0x377fda6a]
    [ 0.000000] ACPI: RSDP 000f65b0 00014 (v00 PTLTD )
    [ 0.000000] ACPI: RSDT 5f690af0 0004C (v01 PTLTD HunterFL 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 5f699e88 00074 (v01 LGE HunterFL 06040000 LGE 0000005F)
    [ 0.000000] ACPI: DSDT 5f691a5d 0842B (v01 LGE HUNTER 06040000 INTL 20030224)
    [ 0.000000] ACPI: FACS 5f6aafc0 00040
    [ 0.000000] ACPI: APIC 5f699efc 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: HPET 5f699f64 00038 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: MCFG 5f699f9c 0003C (v01 INTEL ALVISO 06040000 LOHR 0000005F)
    [ 0.000000] ACPI: BOOT 5f699fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 5f69182f 0022E (v01 SataRe SataAhci 00001000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f69135a 004D5 (v01 LGE HNT_IGFX 00001000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690f15 00277 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690d55 001C0 (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
    [ 0.000000] ACPI: SSDT 5f690b3c 00219 (v01 PmRef CpuPm 00003000 INTL 20030224)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 638MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x0084a000, 0x0084afff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x5f68ffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x5f68ffff]
    [ 0.000000] On node 0 totalpages: 390702
    [ 0.000000] free_area_init_node: node 0, pgdat c06af240, node_mem_map f691f020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 1278 pages used for memmap
    [ 0.000000] HighMem zone: 163474 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f68fa000 s33472 r0 d23872 u57344
    [ 0.000000] pcpu-alloc: s33472 r0 d23872 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 388926
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b68b701a-eb23-4df9-b3c8-ec3497d5f78f ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 3126392 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f690)
    [ 0.000000] Memory: 1536040k/1563200k available (4154k kernel code, 26768k reserved, 1734k data, 596k init, 653896k highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc06c1000 - 0xc0756000 ( 596 kB)
    .data : 0xc050e91e - 0xc06c0300 (1734 kB)
    .text : 0xc0100000 - 0xc050e91e (4154 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1862.042 MHz processor
    [ 0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.25 BogoMIPS (lpj=6206806)
    [ 0.003339] pid_max: default: 32768 minimum: 301
    [ 0.003390] Security Framework initialized
    [ 0.003401] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003415] Mount-cache hash table entries: 512
    [ 0.003697] Initializing cgroup subsys memory
    [ 0.003710] Initializing cgroup subsys devices
    [ 0.003713] Initializing cgroup subsys freezer
    [ 0.003715] Initializing cgroup subsys net_cls
    [ 0.003718] Initializing cgroup subsys blkio
    [ 0.003751] Disabled fast string operations
    [ 0.003759] mce: CPU supports 5 MCE banks
    [ 0.003768] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003779] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
    Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
    tlb_flushall_shift: 6
    [ 0.010647] ACPI: Core revision 20130328
    [ 0.016690] ACPI: All ACPI Tables successfully acquired
    [ 0.020010] ftrace: allocating 18608 entries in 37 pages
    [ 0.026776] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061246] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.86GHz (fam: 06, model: 0d, stepping: 08)
    [ 0.063333] Performance Events: p6 PMU driver.
    [ 0.063333] ... version: 0
    [ 0.063333] ... bit width: 32
    [ 0.063333] ... generic registers: 2
    [ 0.063333] ... value mask: 00000000ffffffff
    [ 0.063333] ... max period: 000000007fffffff
    [ 0.063333] ... fixed-purpose events: 0
    [ 0.063333] ... event mask: 0000000000000003
    [ 0.076681] Brought up 1 CPUs
    [ 0.076684] smpboot: Total of 1 processors activated (3725.25 BogoMIPS)
    [ 0.077871] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.078028] devtmpfs: initialized
    [ 0.078311] PM: Registering ACPI NVS region [mem 0x5f69a000-0x5f6fffff] (417792 bytes)
    [ 0.079835] RTC time: 0:17:13, date: 08/01/13
    [ 0.079897] NET: Registered protocol family 16
    [ 0.080138] ACPI: bus type PCI registered
    [ 0.080221] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.080225] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.080227] PCI: Using MMCONFIG for extended config space
    [ 0.080229] PCI: Using configuration type 1 for base access
    [ 0.081113] bio: create slab <bio-0> at 0
    [ 0.081231] ACPI: Added _OSI(Module Device)
    [ 0.081234] ACPI: Added _OSI(Processor Device)
    [ 0.081237] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.081239] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.082662] ACPI: EC: Look up EC in DSDT
    [ 0.086937] ACPI: Interpreter enabled
    [ 0.086956] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
    [ 0.086962] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.086980] ACPI: (supports S0 S3 S4 S5)
    [ 0.086983] ACPI: Using IOAPIC for interrupt routing
    [ 0.087016] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.087127] ACPI: No dock devices found.
    [ 0.100886] ACPI: Power Resource [CTHT] (off)
    [ 0.103939] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.104651] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.104655] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.104658] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.104662] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    [ 0.104665] acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    [ 0.104668] acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    [ 0.104672] acpi PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
    [ 0.104675] PCI: root bus 00: using default resources
    [ 0.104777] PCI host bridge to bus 0000:00
    [ 0.104781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.104785] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.104788] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.104800] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
    [ 0.104921] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
    [ 0.104933] pci 0000:00:02.0: reg 10: [mem 0xb0080000-0xb00fffff]
    [ 0.104939] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807]
    [ 0.104946] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
    [ 0.104953] pci 0000:00:02.0: reg 1c: [mem 0xb0040000-0xb007ffff]
    [ 0.105035] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
    [ 0.105045] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x0007ffff]
    [ 0.105212] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
    [ 0.105235] pci 0000:00:1b.0: reg 10: [mem 0xb0000000-0xb0003fff 64bit]
    [ 0.105333] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.105390] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.105451] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
    [ 0.105553] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.105593] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.105654] pci 0000:00:1c.2: [8086:2664] type 01 class 0x060400
    [ 0.105755] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.105803] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.105861] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
    [ 0.105915] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
    [ 0.106742] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.106797] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
    [ 0.106852] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
    [ 0.106930] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.106985] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
    [ 0.107039] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
    [ 0.107119] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.107171] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
    [ 0.107225] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
    [ 0.107306] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.107374] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
    [ 0.107398] pci 0000:00:1d.7: reg 10: [mem 0xb0004000-0xb00043ff]
    [ 0.107497] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.107550] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.107609] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.107721] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.107778] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
    [ 0.107883] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.107889] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.107896] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0300-030f
    [ 0.107987] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
    [ 0.108004] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.108016] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.108029] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.108041] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.108053] pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
    [ 0.108175] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
    [ 0.108246] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff]
    [ 0.108477] pci 0000:02:00.0: [11ab:4351] type 00 class 0x020000
    [ 0.108510] pci 0000:02:00.0: reg 10: [mem 0xb4000000-0xb4003fff 64bit]
    [ 0.108527] pci 0000:02:00.0: reg 18: [io 0x2000-0x20ff]
    [ 0.108674] pci 0000:02:00.0: supports D1 D2
    [ 0.108677] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.108734] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.110062] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.110076] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.110082] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.110087] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
    [ 0.110096] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.110182] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.110188] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.110193] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
    [ 0.110202] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.110279] pci 0000:06:00.0: [104c:8031] type 02 class 0x060700
    [ 0.110305] pci 0000:06:00.0: reg 10: [mem 0xfedff000-0xfedfffff]
    [ 0.110347] pci 0000:06:00.0: supports D1 D2
    [ 0.110350] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.110429] pci 0000:06:00.2: [104c:8032] type 00 class 0x0c0010
    [ 0.110455] pci 0000:06:00.2: reg 10: [mem 0xbc006000-0xbc0067ff]
    [ 0.110469] pci 0000:06:00.2: reg 14: [mem 0xbc000000-0xbc003fff]
    [ 0.110572] pci 0000:06:00.2: supports D1 D2
    [ 0.110575] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
    [ 0.110654] pci 0000:06:00.3: [104c:8033] type 00 class 0x018000
    [ 0.110680] pci 0000:06:00.3: reg 10: [mem 0xbc004000-0xbc005fff]
    [ 0.110790] pci 0000:06:00.3: supports D1 D2
    [ 0.110793] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
    [ 0.110870] pci 0000:06:00.4: [104c:8034] type 00 class 0x080500
    [ 0.110896] pci 0000:06:00.4: reg 10: [mem 0xbc007000-0xbc0070ff]
    [ 0.110911] pci 0000:06:00.4: reg 14: [mem 0xbc006c00-0xbc006cff]
    [ 0.110925] pci 0000:06:00.4: reg 18: [mem 0xbc006800-0xbc0068ff]
    [ 0.111013] pci 0000:06:00.4: supports D1 D2
    [ 0.111016] pci 0000:06:00.4: PME# supported from D0 D1 D2 D3hot
    [ 0.111098] pci 0000:06:02.0: [8086:4220] type 00 class 0x028000
    [ 0.111124] pci 0000:06:02.0: reg 10: [mem 0xbc008000-0xbc008fff]
    [ 0.111236] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
    [ 0.111354] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
    [ 0.111362] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
    [ 0.111371] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.111374] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.111379] pci 0000:06:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    [ 0.111448] pci_bus 0000:07: busn_res: can not insert [bus 07-ff] under [bus 06] (conflicts with (null) [bus 06])
    [ 0.111455] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 0a
    [ 0.111459] pci_bus 0000:07: busn_res: can not insert [bus 07-0a] under [bus 06] (conflicts with (null) [bus 06])
    [ 0.111464] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06]
    [ 0.111487] pci_bus 0000:00: on NUMA node 0
    [ 0.111491] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.111495] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.111688] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 6 7 *10 14 15)
    [ 0.111768] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 6 7 *11 14 15)
    [ 0.111846] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *7 10 14 15)
    [ 0.111924] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 *11 14 15)
    [ 0.112001] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 7 10 14 15) *0, disabled.
    [ 0.112082] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 11 14 15) *0, disabled.
    [ 0.112159] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 14 15) *0, disabled.
    [ 0.112238] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 11 14 15) *10
    [ 0.113690] ACPI: Enabled 3 GPEs in block 00 to 1F
    [ 0.113703] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.113752] Found 1 acpi root devices
    [ 0.113811] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.113894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.113899] vgaarb: loaded
    [ 0.113901] vgaarb: bridge control possible 0000:00:02.0
    [ 0.113956] PCI: Using ACPI for IRQ routing
    [ 0.123744] PCI: pci_cache_line_size set to 64 bytes
    [ 0.123813] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    [ 0.123815] e820: reserve RAM buffer [mem 0x5f690000-0x5fffffff]
    [ 0.123948] NetLabel: Initializing
    [ 0.123950] NetLabel: domain hash size = 128
    [ 0.123952] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.123968] NetLabel: unlabeled traffic allowed by default
    [ 0.124001] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.124008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.124013] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.126058] Switching to clocksource hpet
    [ 0.130773] pnp: PnP ACPI init
    [ 0.130800] ACPI: bus type PNP registered
    [ 0.131416] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.131421] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
    [ 0.131425] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
    [ 0.131429] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
    [ 0.131432] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
    [ 0.131436] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.131442] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.131661] pnp 00:01: [dma 4]
    [ 0.131697] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.131737] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.131879] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.131929] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.132035] system 00:05: [io 0x0300-0x030f] has been reserved
    [ 0.132039] system 00:05: [io 0x0800-0x080f] has been reserved
    [ 0.132042] system 00:05: [io 0x1000-0x107f] has been reserved
    [ 0.132046] system 00:05: [io 0x1180-0x11bf] has been reserved
    [ 0.132050] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.132113] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.132390] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.133678] pnp 00:08: [dma 1]
    [ 0.133784] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.134099] pnp 00:09: [dma 3]
    [ 0.134174] pnp 00:09: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
    [ 0.134235] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.134282] pnp 00:0b: Plug and Play ACPI device, IDs SYN1301 PNP0f13 (active)
    [ 0.134310] pnp: PnP ACPI: found 12 devices
    [ 0.134312] ACPI: bus type PNP unregistered
    [ 0.171975] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.171980] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.171985] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
    [ 0.171989] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.171994] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 06] add_size 4000000
    [ 0.172003] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.172007] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.172014] pci 0000:00:1e.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
    [ 0.172018] pci 0000:00:02.1: BAR 0: assigned [mem 0x64000000-0x6407ffff]
    [ 0.172025] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.172029] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.172033] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.172040] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
    [ 0.172046] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.172055] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.172059] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
    [ 0.172066] pci 0000:00:1c.2: bridge window [mem 0xb8000000-0xbbffffff]
    [ 0.172072] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.172083] pci 0000:06:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    [ 0.172087] pci 0000:06:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    [ 0.172090] pci 0000:06:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.172093] pci 0000:06:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    [ 0.172097] pci 0000:06:00.0: BAR 15: assigned [mem 0x60000000-0x63ffffff pref]
    [ 0.172102] pci 0000:06:00.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
    [ 0.172105] pci 0000:06:00.0: BAR 13: assigned [io 0x4000-0x40ff]
    [ 0.172108] pci 0000:06:00.0: BAR 14: assigned [io 0x4400-0x44ff]
    [ 0.172112] pci 0000:06:00.0: CardBus bridge to [bus 07-0a]
    [ 0.172115] pci 0000:06:00.0: bridge window [io 0x4000-0x40ff]
    [ 0.172122] pci 0000:06:00.0: bridge window [io 0x4400-0x44ff]
    [ 0.172128] pci 0000:06:00.0: bridge window [mem 0x60000000-0x63ffffff pref]
    [ 0.172135] pci 0000:06:00.0: bridge window [mem 0x68000000-0x6bffffff]
    [ 0.172141] pci 0000:00:1e.0: PCI bridge to [bus 06]
    [ 0.172145] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
    [ 0.172152] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xbc0fffff]
    [ 0.172158] pci 0000:00:1e.0: bridge window [mem 0x60000000-0x63ffffff pref]
    [ 0.172482] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.172565] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.172568] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.172571] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.172575] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
    [ 0.172578] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
    [ 0.172581] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.172585] pci_bus 0000:04: resource 1 [mem 0xb8000000-0xbbffffff]
    [ 0.172588] pci_bus 0000:04: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
    [ 0.172591] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
    [ 0.172594] pci_bus 0000:06: resource 1 [mem 0xbc000000-0xbc0fffff]
    [ 0.172598] pci_bus 0000:06: resource 2 [mem 0x60000000-0x63ffffff pref]
    [ 0.172601] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
    [ 0.172604] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.172607] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
    [ 0.172610] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
    [ 0.172613] pci_bus 0000:07: resource 2 [mem 0x60000000-0x63ffffff pref]
    [ 0.172617] pci_bus 0000:07: resource 3 [mem 0x68000000-0x6bffffff]
    [ 0.172672] NET: Registered protocol family 2
    [ 0.172896] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.172951] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.173002] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.173041] TCP: reno registered
    [ 0.173044] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.173060] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.173150] NET: Registered protocol family 1
    [ 0.173167] pci 0000:00:02.0: Boot video device
    [ 0.174673] PCI: CLS 32 bytes, default 64
    [ 0.174731] Unpacking initramfs...
    [ 0.263828] Freeing initrd memory: 3004k freed
    [ 0.266187] Simple Boot Flag at 0x39 set to 0x1
    [ 0.266287] apm: BIOS not found.
    [ 0.266346] Scanning for low memory corruption every 60 seconds
    [ 0.266796] audit: initializing netlink socket (disabled)
    [ 0.266816] type=2000 audit(1375316232.266:1): initialized
    [ 0.281831] bounce pool size: 64 pages
    [ 0.281845] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.284147] VFS: Disk quotas dquot_6.5.2
    [ 0.284226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.284495] msgmni has been set to 1728
    [ 0.284769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.284804] io scheduler noop registered
    [ 0.284806] io scheduler deadline registered
    [ 0.284852] io scheduler cfq registered (default)
    [ 0.284987] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.285087] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
    [ 0.285270] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.285273] vesafb: scrolling: redraw
    [ 0.285276] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.285482] vesafb: framebuffer at 0xc0000000, mapped to 0xf8080000, using 3072k, total 3072k
    [ 0.315579] Console: switching to colour frame buffer device 128x48
    [ 0.345515] fb0: VESA VGA frame buffer device
    [ 0.345558] intel_idle: does not run on family 6 model 13
    [ 0.345597] GHES: HEST is not enabled!
    [ 0.345617] isapnp: Scanning for PnP cards...
    [ 0.658543] isapnp: No Plug & Play device found
    [ 0.658601] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.679337] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.680017] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.684556] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.686055] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.686096] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.686128] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.686159] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.686194] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.686311] mousedev: PS/2 mouse device common for all mice
    [ 0.686409] rtc_cmos 00:06: RTC can wake from S4
    [ 0.686571] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.686605] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.686637] cpuidle: using governor ladder
    [ 0.686639] cpuidle: using governor menu
    [ 0.686687] drop_monitor: Initializing network drop monitor service
    [ 0.686801] TCP: cubic registered
    [ 0.686956] NET: Registered protocol family 10
    [ 0.687187] NET: Registered protocol family 17
    [ 0.687199] Key type dns_resolver registered
    [ 0.687333] Using IPI No-Shortcut mode
    [ 0.687439] PM: Hibernation image not present or could not be loaded.
    [ 0.687450] registered taskstats version 1
    [ 0.687968] Magic number: 9:800:252
    [ 0.687999] pci 0000:00:1d.0: hash matches
    [ 0.688056] rtc_cmos 00:06: setting system clock to 2013-08-01 00:17:13 UTC (1375316233)
    [ 0.688187] Freeing unused kernel memory: 596k freed
    [ 0.688527] Write protecting the kernel text: 4156k
    [ 0.688561] Write protecting the kernel read-only data: 1316k
    [ 0.693760] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.699029] systemd-udevd[38]: starting version 204
    [ 0.749237] ACPI: bus type USB registered
    [ 0.749277] usbcore: registered new interface driver usbfs
    [ 0.749292] usbcore: registered new interface driver hub
    [ 0.753176] usbcore: registered new device driver usb
    [ 0.753809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.753997] ehci-pci: EHCI PCI platform driver
    [ 0.754224] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 0.754238] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 0.754248] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [ 0.754268] ehci-pci 0000:00:1d.7: debug port 1
    [ 0.757154] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.761830] sdhci: Secure Digital Host Controller Interface driver
    [ 0.761835] sdhci: Copyright(c) Pierre Ossman
    [ 0.762138] sdhci-pci 0000:06:00.4: SDHCI controller found [104c:8034] (rev 0)
    [ 0.762387] mmc0: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.763154] mmc1: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.763242] mmc2: SDHCI controller on PCI [0000:06:00.4] using PIO
    [ 0.767069] SCSI subsystem initialized
    [ 0.769405] ACPI: bus type ATA registered
    [ 0.769889] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.769918] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0004000
    [ 0.776689] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.776917] hub 1-0:1.0: USB hub found
    [ 0.776924] hub 1-0:1.0: 8 ports detected
    [ 0.777495] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.777500] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.777510] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.777540] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
    [ 0.777717] hub 2-0:1.0: USB hub found
    [ 0.777722] hub 2-0:1.0: 2 ports detected
    [ 0.777972] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.777976] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.777984] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [ 0.778025] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
    [ 0.778188] hub 3-0:1.0: USB hub found
    [ 0.778193] hub 3-0:1.0: 2 ports detected
    [ 0.778441] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.778446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.778453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 0.778492] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
    [ 0.778666] hub 4-0:1.0: USB hub found
    [ 0.778671] hub 4-0:1.0: 2 ports detected
    [ 0.778926] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 0.778930] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 0.778938] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 0.778966] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
    [ 0.779135] hub 5-0:1.0: USB hub found
    [ 0.779140] hub 5-0:1.0: 2 ports detected
    [ 0.779655] libata version 3.00 loaded.
    [ 0.780086] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780279] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.783440] scsi0 : ata_piix
    [ 0.786084] scsi1 : ata_piix
    [ 0.786168] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
    [ 0.786171] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
    [ 0.786694] tifm_core: MMC/SD card detected in socket 0:3
    [ 0.786781] ata2: port disabled--ignoring
    [ 0.823446] firewire_ohci 0000:06:00.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    [ 0.950540] ata1.00: ATA-7: FUJITSU MHV2080AT PL, 000000A0, max UDMA/100
    [ 0.950544] ata1.00: 156301488 sectors, multi 16: LBA
    [ 0.950557] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4082N, HH02, max UDMA/33
    [ 0.963752] ata1.00: configured for UDMA/100
    [ 0.976914] ata1.01: configured for UDMA/33
    [ 0.979353] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5
    [ 0.982892] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4082N HH02 PQ: 0 ANSI: 5
    [ 0.986322] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 0.986396] sd 0:0:0:0: [sda] Write Protect is off
    [ 0.986400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.986430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.080286] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.080290] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.080606] sr 0:0:1:0: Attached scsi CD-ROM sr0
    [ 1.108366] sda: sda1 < sda5 > sda2 sda3 sda4
    [ 1.109847] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.190025] usb 1-5: new high-speed USB device number 4 using ehci-pci
    [ 1.266683] tsc: Refined TSC clocksource calibration: 1861.999 MHz
    [ 1.266690] Switching to clocksource tsc
    [ 1.317249] usb-storage 1-5:1.0: USB Mass Storage device detected
    [ 1.317314] scsi2 : usb-storage 1-5:1.0
    [ 1.317597] usbcore: registered new interface driver usb-storage
    [ 1.323429] firewire_core 0000:06:00.2: created device fw0: GUID 6600774200e09104, S400
    [ 1.420016] usb 1-6: new high-speed USB device number 5 using ehci-pci
    [ 1.546136] usb-storage 1-6:1.0: USB Mass Storage device detected
    [ 1.546307] scsi3 : usb-storage 1-6:1.0
    [ 1.770014] usb 2-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.949297] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.961728] usbcore: registered new interface driver usbhid
    [ 1.961731] usbhid: USB HID core driver
    [ 2.148459] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.173364] usb 2-2: new low-speed USB device number 3 using uhci_hcd
    [ 2.320861] scsi 2:0:0:0: CD-ROM SONY DVD RW DRU-190A 1.62 PQ: 0 ANSI: 0
    [ 2.323718] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.323862] sr 2:0:0:0: Attached scsi CD-ROM sr1
    [ 2.547488] scsi 3:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2
    [ 2.548846] sd 3:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
    [ 2.549467] sd 3:0:0:0: [sdb] Write Protect is off
    [ 2.549470] sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [ 2.550095] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.550415] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.554343] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.554659] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.727731] sdb: sdb1
    [ 2.729968] sd 3:0:0:0: [sdb] No Caching mode page present
    [ 2.730299] sd 3:0:0:0: [sdb] Assuming drive cache: write through
    [ 2.731468] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 3.120230] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.159302] systemd[1]: Set hostname to <ighost>.
    [ 3.828104] systemd[1]: Cannot add dependency job for unit acpid.service, ignoring: Unit acpid.service failed to load: No such file or directory. See system logs and 'systemctl status acpid.service' for details.
    [ 3.828451] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.828515] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.828533] systemd[1]: Starting Remote File Systems.
    [ 3.828551] systemd[1]: Reached target Remote File Systems.
    [ 3.828567] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.828615] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.828630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.828661] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.828675] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.828705] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.828719] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.828753] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.828772] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.828816] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.828830] systemd[1]: Starting Paths.
    [ 3.828845] systemd[1]: Reached target Paths.
    [ 3.828861] systemd[1]: Starting Journal Socket.
    [ 3.828922] systemd[1]: Listening on Journal Socket.
    [ 3.828942] systemd[1]: Starting Setup Virtual Console...
    [ 3.829541] systemd[1]: Starting Create static device nodes in /dev...
    [ 3.859627] systemd[1]: Starting Apply Kernel Variables...
    [ 3.860503] systemd[1]: Mounting Huge Pages File System...
    [ 3.860890] systemd[1]: Starting Journal Service...
    [ 3.861380] systemd[1]: Started Journal Service.
    [ 3.861499] systemd[1]: Starting udev Kernel Socket.
    [ 3.861542] systemd[1]: Listening on udev Kernel Socket.
    [ 3.861615] systemd[1]: Starting udev Control Socket.
    [ 3.861652] systemd[1]: Listening on udev Control Socket.
    [ 3.861722] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.862166] systemd[1]: Mounting Debug File System...
    [ 3.862572] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.862944] systemd[1]: Starting Encrypted Volumes.
    [ 3.862964] systemd[1]: Reached target Encrypted Volumes.
    [ 3.863003] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.863164] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.879599] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.914088] systemd[1]: Starting Load Kernel Modules...
    [ 3.914616] systemd[1]: Expecting device dev-disk-by\x2duuid-9fa4ccc9\x2d879c\x2d42b0\x2d8c42\x2d39ff67b9bf38.device...
    [ 3.914650] systemd[1]: Started File System Check on Root Device.
    [ 3.914670] systemd[1]: Mounting Temporary Directory...
    [ 3.930156] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 3.930608] systemd[1]: Expecting device dev-disk-by\x2duuid-BAA022C6A0228949.device...
    [ 3.930627] systemd[1]: Expecting device dev-disk-by\x2duuid-42143f2b\x2d29c6\x2d4174\x2dab7b\x2dfb1600c601e6.device...
    [ 5.034037] FS-Cache: Loaded
    [ 5.056025] RPC: Registered named UNIX socket transport module.
    [ 5.056030] RPC: Registered udp transport module.
    [ 5.056032] RPC: Registered tcp transport module.
    [ 5.056034] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 5.158185] EXT4-fs (sda5): re-mounted. Opts: data=ordered
    [ 5.291383] systemd-udevd[105]: starting version 204
    [ 5.355353] FS-Cache: Netfs 'nfs' registered for caching
    [ 6.472733] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 6.472878] ACPI: Lid Switch [LID0]
    [ 6.474425] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    [ 6.474491] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
    [ 6.475351] ACPI: Requesting acpi_cpufreq
    [ 6.475712] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [ 6.475718] ACPI: Power Button [PWRB]
    [ 6.475794] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    [ 6.475798] ACPI: Sleep Button [SLPB]
    [ 6.477173] ACPI: AC Adapter [AC] (on-line)
    [ 6.524341] tsc: Marking TSC unstable due to TSC halts in idle
    [ 6.525067] ACPI: acpi_idle registered with cpuidle
    [ 6.525459] ACPI: Battery Slot [CMB0] (battery absent)
    [ 6.525775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 6.525782] ACPI: Power Button [PWRF]
    [ 6.529302] Switching to clocksource hpet
    [ 6.623493] wmi: Mapper loaded
    [ 6.706893] NET: Registered protocol family 23
    [ 6.749372] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227
    [ 6.749400] smsc_superio_flat(): fir: 0x6f8, sir: 0x2f8, dma: 03, irq: 3, mode: 0x0e
    [ 6.749418] smsc_ircc_present(), addr 0x06f8 - no device found!
    [ 6.752284] parport_pc 00:08: reported by Plug and Play ACPI
    [ 6.752364] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
    [ 6.759649] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.759653] ACPI: Thermal Zone [TZ1] (40 C)
    [ 6.761691] thermal LNXTHERM:01: registered as thermal_zone1
    [ 6.761694] ACPI: Thermal Zone [TZ2] (55 C)
    [ 6.775603] ACPI: Fan [FAN0] (off)
    [ 6.868349] sky2: driver version 1.30
    [ 6.868486] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
    [ 6.868560] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 6.868879] sky2 0000:02:00.0 eth0: addr 00:e0:91:0f:4a:19
    [ 6.886311] intel_rng: FWH not detected
    [ 7.052962] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
    [ 7.052973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052978] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
    [ 7.052983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052985] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
    [ 7.052990] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 7.052992] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 7.106512] Linux agpgart interface v0.103
    [ 7.142882] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
    [ 7.143028] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
    [ 7.144655] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 7.144970] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [ 7.217080] yenta_cardbus 0000:06:00.0: CardBus bridge found [1854:0028]
    [ 7.217106] yenta_cardbus 0000:06:00.0: Using INTVAL to route CSC interrupts to PCI
    [ 7.217109] yenta_cardbus 0000:06:00.0: Routing CardBus interrupts to PCI
    [ 7.217116] yenta_cardbus 0000:06:00.0: TI: mfunc 0x01d01002, devctl 0x64
    [ 7.228515] [drm] Initialized drm 1.1.0 20060810
    [ 7.266001] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.297286] lib80211: common routines for IEEE802.11 drivers
    [ 7.297292] lib80211_crypt: registered algorithm 'NULL'
    [ 7.301107] [drm] Memory usable by graphics device = 256M
    [ 7.301113] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [ 7.301116] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 7.301141] Console: switching to colour dummy device 80x25
    [ 7.301257] i915 0000:00:02.0: setting latency timer to 64
    [ 7.302295] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.302300] [drm] Driver supports precise vblank timestamp query.
    [ 7.302376] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 7.316734] libipw: 802.11 data/management/control stack, git-1.1.13
    [ 7.316737] libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
    [ 7.323825] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
    [ 7.323828] ipw2200: Copyright(c) 2003-2006 Intel Corporation
    [ 7.434003] [drm] initialized overlay support
    [ 7.447402] yenta_cardbus 0000:06:00.0: ISA IRQ mask 0x0cd8, PCI irq 16
    [ 7.447408] yenta_cardbus 0000:06:00.0: Socket status: 30000006
    [ 7.447414] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a
    [ 7.447425] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
    [ 7.447429] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff:
    [ 7.448715] excluding 0x4000-0x40ff 0x4400-0x44ff
    [ 7.454021] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0xbc000000-0xbc0fffff]
    [ 7.454026] pcmcia_socket pcmcia_socket0: cs: memory probe 0xbc000000-0xbc0fffff:
    [ 7.454030] excluding 0xbc000000-0xbc00ffff
    [ 7.454045] yenta_cardbus 0000:06:00.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
    [ 7.454049] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff:
    [ 7.454061] excluding 0x60000000-0x63ffffff
    [ 7.457625] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
    [ 7.726030] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    [ 7.727184] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
    [ 7.730133] hid-generic 0003:0518:0001.0002: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input0
    [ 7.730188] a4tech 0003:09DA:000A.0001: input,hidraw1: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
    [ 7.732273] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input8
    [ 7.732416] hid-generic 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-2/input1
    [ 7.797551] ipw2200: Radio Frequency Kill Switch is On:
    Kill switch must be turned off for wireless networking to work.
    [ 7.800799] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
    [ 7.893088] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 7.991976] tc1100_wmi: HP Compaq TC1100 Tablet WMI Extras loaded
    [ 8.038907] fbcon: inteldrmfb (fb0) is primary device
    [ 8.048603] ppdev: user-space parallel port driver
    [ 8.059482] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
    [ 8.059630] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 8.083387] Console: switching to colour frame buffer device 128x48
    [ 8.089032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 8.089037] i915 0000:00:02.0: registered panic notifier
    [ 8.089048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.089555] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 8.110287] systemd-udevd[128]: renamed network interface eth0 to enp2s0
    [ 8.123115] iTCO_vendor_support: vendor-support=0
    [ 8.199308] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
    [ 8.200763] excluding 0x170-0x177 0x1f0-0x1f7 0x300-0x30f 0x370-0x37f
    [ 8.201559] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
    [ 8.201948] excluding 0x3f0-0x3ff 0x4d0-0x4d7
    [ 8.202341] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
    [ 8.202952] clean.
    [ 8.203000] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
    [ 8.204946] clean.
    [ 8.205013] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
    [ 8.205024] excluding 0xc0000-0xc7fff 0xdc000-0xfffff
    [ 8.205096] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
    [ 8.205128] clean.
    [ 8.205177] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
    [ 8.205200] excluding 0x60000000-0x60ffffff
    [ 8.205252] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
    [ 8.205948] clean.
    [ 8.260695] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 8.260987] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.261238] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 8.261465] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 8.261705] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 8.261931] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
    [ 8.263318] ACPI Warning: 0x000018e0-0x000018ff SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
    [ 8.263328] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 8.264893] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 8.264941] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
    [ 8.268408] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 8.283555] systemd-udevd[123]: renamed network interface eth1 to wlp6s2
    [ 8.508098] psmouse serio2: synaptics: Touchpad model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008/0x0, board id: 3655, fw id: 28762
    [ 8.543316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input16
    [ 9.444744] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.746168] fuse init (API version 7.22)
    [ 9.795856] Adding 2096476k swap on /dev/sda4. Priority:-1 extents:1 across:2096476k FS
    [ 10.804356] sky2 0000:02:00.0 enp2s0: enabling interface
    [ 10.804455] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
    [ 12.524356] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 12.524399] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
    [ 15.965900] systemd-logind[185]: Watching system buttons on /dev/input/event5 (Power Button)
    [ 15.966015] systemd-logind[185]: Watching system buttons on /dev/input/event2 (Video Bus)
    [ 15.966122] systemd-logind[185]: Watching system buttons on /dev/input/event3 (Power Button)
    [ 15.966231] systemd-logind[185]: Watching system buttons on /dev/input/event1 (Lid Switch)
    [ 15.966337] systemd-logind[185]: Watching system buttons on /dev/input/event4 (Sleep Button)
    [ 29.280330] systemd[1]: Unit [email protected] entered failed state.
    [ 29.380404] systemd[1]: [email protected] holdoff time over, scheduling restart.
    [ 29.383839] systemd[1]: Unit [email protected] entered failed state.
    [ 283.968752] sky2 0000:02:00.0 enp2s0: Link is down
    [ 288.653377] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 301.725348] sky2 0000:02:00.0 enp2s0: Link is down
    [ 303.401808] sky2 0000:02:00.0 enp2s0: Link is up at 100 Mbps, full duplex, flow control rx
    [ 978.946847] usb 1-5: USB disconnect, device number 4
    [ 978.952420] cdrom: issuing MRW background format suspend
    [36653.884288] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884298] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884304] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.884310] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.983274] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [36653.983488] hda-intel 0000:00:1b.0: spurious response 0x0:0x0, last cmd=0xb70740
    [40311.593171] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [40311.595838] sr 0:0:1:0: Attached scsi generic sg1 type 5
    [40311.596002] sd 3:0:0:0: Attached scsi generic sg2 type 0
    [43081.692487] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=0
    [43081.983029] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [43083.232434] ipw2200: Failed to send POWER_MODE: Command timed out.

    cfr wrote:
    Welcome to the forums.
    Have you tried uninstalling xf86-input-keyboard? If you want evdev to handle it, that is.
    Does the keyboard work when you decrypt the encryption device (or maybe you use a keyfile)?
    Does it work if you boot to the command line?
    Is the keyboard hook included in the initramfs? (Though I don't think this should matter for later.)
    first place, tnx for the answer and sorry cause it took too long for me to answer back.
    I uninstalled xf86-input-keyboard. now i get an error at boot time but it passes to arch so no big deal.
    About encryption device I have no idea cause i never chose to encrypt anything.
    About working at command line, answer is no. It is not working in my bash and also at tty1.
    about keyboard hook, Answer is yes, it is included.
    I'm really enjoying my systems speed with arch but this problem is really killing me. Now i'm using my laptop like a PC no movement allowed cause I must take a keyboard with me.
    and really, an active forum and just one answer to my question!

  • Time Machine backups only work after restart

    Hi
    Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
    I have a Mid 2014 MBP 13 in running 10.10.2
    I backup onto an external USB via a hub.
    Things I have tried with review of Pondini great site which has helped with different TM backup problems.
    Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
    Direct USB connection
    Backup via Airport Extreme
    Re-index spotlight
    Reformat USB disk
    New USB disk!
    Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
    Any help gratefully received
    19/03/2015 12:59:07.730 pm
    com.apple.prefs.backup.remoteservice[2916]
    Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    19/03/2015 12:59:10.238 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
    19/03/2015 12:59:10.240 pm
    UserEventAgent[16]
    com.apple.backupd-auto launchd job enabled
    19/03/2015 12:59:10.238 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 12:59:10.239 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
    19/03/2015 12:59:23.162 pm
    com.apple.backupd[2929]
    Starting manual backup
    19/03/2015 12:59:23.358 pm
    com.apple.backupd[2929]
    Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
    19/03/2015 1:01:55.000 pm
    kernel[0]
    process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
    19/03/2015 1:12:00.297 pm
    com.apple.backupd[2929]
    Will copy (Zero KB) from Macintosh HD
    19/03/2015 1:12:00.350 pm
    com.apple.backupd[2929]
    Found 221479 files (439.9 MB) needing backup
    19/03/2015 1:12:01.050 pm
    com.apple.backupd[2929]
    2.33 GB required (including padding), 554.92 GB available
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
    19/03/2015 1:21:04.659 pm
    com.apple.xpc.launchd[1]
    (com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
    19/03/2015 1:21:51.062 pm
    com.apple.backupd[167]
    Starting manual backup
    19/03/2015 1:21:51.380 pm
    com.apple.backupd[167]
    Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
    19/03/2015 1:24:40.000 pm
    kernel[0]
    process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
    19/03/2015 1:24:40.821 pm
    spindump[507]
    Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
    19/03/2015 1:34:29.100 pm
    com.apple.backupd[167]
    Will copy (Zero KB) from Macintosh HD
    19/03/2015 1:34:29.155 pm
    com.apple.backupd[167]
    Found 221268 files (493.5 MB) needing backup
    19/03/2015 1:34:29.235 pm
    com.apple.backupd[167]
    2.39 GB required (including padding), 554.92 GB available
    19/03/2015 1:35:57.393 pm
    com.apple.backupd[167]
    Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
    19/03/2015 1:36:33.451 pm
    com.apple.backupd[167]
    Created new backup: 2015-03-19-133632
    19/03/2015 1:36:39.933 pm
    com.apple.backupd[167]
    Starting post-backup thinning
    19/03/2015 1:36:39.943 pm
    com.apple.backupd[167]
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
    19/03/2015 1:36:39.944 pm
    com.apple.backupd[167]
    Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
    19/03/2015 1:36:53.268 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
    19/03/2015 1:37:05.844 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
    19/03/2015 1:37:12.476 pm
    com.apple.backupd[167]
    Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
    19/03/2015 1:37:12.476 pm
    com.apple.backupd[167]
    Post-backup thinning complete: 3 expired backups removed
    19/03/2015 1:37:12.495 pm
    com.apple.backupd[167]
    Backup completed successfully.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Pacman -Syu and now keyboard only works as root kde

    I did a pacman -Syu and now keyboard only works as root kde
    Users can use keyboard in the basic console and this is a failure within KDE or the X-server.
    On this upgrade I needed to add the portmap daemon to rc.conf.
    I am running kerrnel 2.6.5-2. The upgrade lifted KDE to KDE 3.2.2. Xfree86 was upgraded previously and did not present this problem so the KDE upgrade is under suspicion.
    My rc.conf daemons list is DAEMONS=(portmap syslogd klogd !pcmcia network netfs crond fam cups kdm)
    Is there something extra I need to add?

    Hi colnago,
    I tidied up my daemons, after considering how you've set yours. I agree portmap and fam are not useful. I now understand that the upgrade was leaning on fam so that it noticed portmap was missing... a red herring issue, perhaps?
    I had no means of getting a dmesg log readout, because of the keyboard crashing. So I have patiently reinstalled kde 3.2.1, by way of adding the components one by one from /var/cache/pacman/pkg/. That works, so I can now pause and investigate if there are any any known issues with the 3.2.2 upgrade that shed light.
    I did get an indicator that the DCOP server did not function properly. This happened as warnings and errors, when I installed an additional user.
    Thanks
    gs

Maybe you are looking for

  • Adding/Deleting keywords for multiple images

    Well, I'm finally paying the price for bad keyword management and I'm trying to clean up my nightmare of a system now but running into trouble. I'm using Lightroom 3.2. My workflow follows one of two types: 1) I'm shooting something specific (soccer

  • Partition Corruption after Update Install

    The last two times I've attempted to run an Apple software upgrade installation I've ended up with my Hard disk partition getting hosed and having to repartition (and OS reinstall). Has anyone else have this problem? BTY: In both cases the software u

  • Spotlight search engine cannot find all word files

    I have a mid 2012 Macbook pro. I updated to Yosemite on last Friday. I did a clean installation from a USB. After the installation, I installed Ms word. I feel the search function is not as good as Mavericks. I made sure I selected everything in the

  • Troubleshoot in updating ipad 3 software. Will be thankful for your corporation :)

    hi. i start to update the sotware wirelessly first but its battery and get down & showed message to connect that to the itunes. i connected to the itunes it shows to download and update the software. i clicked that & it showed that download will comp

  • Too old to fix

    Adobe solution to solving my problem installing element 7, is to say "buy an upgrade". That was their response to my error 1935 install problem. A typical " we already have your money attitude". I will cut my loses and try one of their many competito