External Lacie DVD/CD burner not working

Hello,
I'll try to keep this brief. I'm trying to help my brother with a problem that arose today with his Lacie DVD/CD burner. He uses a Mac G4, firewire 800. It quit recognizing media. Same (blank) media as he's always used, but it says that the disk is full. Wouldn't even recognize a movie he had created and burned onto the DVD, using the same burner in question. His computer recognizes the Lacie. He went out and bought a brand new Lacie today and he has the exact same problems, so we're assuming it's his computer and not the Lacie? This is so puzzling, since before today he had no problems. If anyone out there has any suggestions, we'd surely appreciate hearing them.
Thank you in advance.

xabbess, did you figure this out?
I am experiencing the same issue with my Lacie DVD burner (LaCie 20x d2 DVD±RW with LightScribe) not recognizing certain blank media. It will only recognize and burn DVD-Rs, and even that only works sporadically (I've tested DVD+Rs & -Rs from various brands recommended by Lacie). I've tested it on the two computers I have - a Mirrored Door Dual G4 and an iBook G4 both running 10.4.11 at the time - with the exact same results. But it did seem to work fine on an Intel iMac at the tech support office at the place I bought it at (MicroTech). So, I'm thinking the DVD burner is okay and that maybe it's just a compatibility issue with my computers or the OS I'm using.
So, I'm wondering if anyone out there has experienced this, and has figured out the problem. I've just recently installed Leopard 10.5.5 on my iBook G4, but I haven't had a chance to test the DVD burner on it. When I do, I'll post the results.

Similar Messages

  • EMac External LACIE DVD Drive not reading.

    eMac External LACIE DVD Drive not reading.
    eMac 700 MHz running OS X 4.4
    Came without DVD or modem internal
    Has 256mb memory
    Bought a used Lacie 1394 Firewire DVR External.
    Was able to burn DVD’s and CD’s with Toast 6 Light.
    Cannot find the “DVD Player” on the hard drive.
    It will read data DVD.
    eMac will not read any movies burnt or bought.
    I was told I probably need more memory?
    Thought running IDVD would fix the problem.
    No Soap.
    This machine was giving external modem problems before Tiger was installed.
    Before we spend more money or just get ride of the eMac.
    What is the DVD problem?
    This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

    OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

  • Logitech external USB DVD reader/burner model LDR-PMD8U2LBK not recognized.

    Got a external USB DVD reader/burner Logitech model LDR-PMD8U2LBK.
    I plug the device, use the adapter but nothing happens. I tried to boot the computer with the driver plugged in, again, nothing. If I put a DVD in the driver, I hear the machine buffer but on the screen, nothing. Checked all the view options, everything is selected. It doesn't appear in the Disk Utility neither. Tried to open a DVD with VLC Player, to no avail. Checked on Logitech's site, there are no drivers for this driver. The seller told me that it should be compatible with my black macbook, I guess there is still a possibility that it is not...

    You shouldn't need drivers for a USB or Firewire connected external device.
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • DVD Burner not working in Mac Mini

    My mac mini (running OSX 10.7.5) all of a sudden stopped burning/reading DVDs, however CD burning and reading still works.
    I ran my system's disk utility and corrected some problems and tried again to no avail. I tried a previously burned DVD which did not work either. However, after trying several DVDs, I got the burner to work (or at least it appeared to as it went thru the usual messages of recording my iDVD movie, but when the recording message showed DONE, the screen appeared to freeze there (typically, at this point, I usually get a message that asks if I want to burn another) --I was able to hit cancel to exit the program. Anyways, the DVD did not burn. At this point on the plus side, I can now read my previously burned DVD... so I tried again to burn my iDVD Movie again but it just spits out after 15-30 seconds.
    I saw on some boards that I should try cleaning the burner? Do I have to take my system apart to do this? Do I use a cleaning disk? If this is the case, will my DVD acknowledge it if it isn't working? Or do I just spray compressed air into its slot?
    Any help would be greatly appreciated as this is for a job that I need to get out.
    Thanks so much!

    Yes use a CD/DVD cleaning disk
    Also see:
    How to clean a DVD Superdrive using a credit card !
    It could be that the burning laser died. Different lasers are used for CD and DVD burning

  • Burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems?  Do I need to just buy a new one?

    burner not working, 8.98 GB free, can this 2003/2004 imac model be cleaned for better use or will I continue to have problems?  Do I need to just buy a new one?  I remember with a PC being able to defrag.

    You could buy an external dvd/cd drive.
    Suggest other world computing.
    You need to delete some files.  Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
    (0)
    Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
    Go after large files that you have created & know what they are.  Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
    (1)
    Run
    OmniDiskSweeper
    "The simple, fast way to save disk space"
    OmniDiskSweeper is now free!
    http://www.omnigroup.com/applications/omnidisksweeper/download/
    This will give you a list of files and folders sorted by size. Go after things you know that are big.
    (2)
    This will save you a gig of space.
    Monolingual is a program for removing unnecessary language resources from Mac OS X,in order to reclaim several hundred megabytes of disk space. It requires at least Mac OS X 10.3.9 (Panther) and also works on Mac OS X 10.4 (Tiger). It worked for me on 10.4
    http://monolingual.sourceforge.net/
    A detailed write-up on how to use Monolingual:
    http://www.jklstudios.com/misc/monolingual.html
    (3)
    These pages have some hints on freeing up space:
    http://thexlab.com/faqs/freeingspace.html
    http://www.macmaps.com/diskfull.html
    (4)
    Buy an external firewire harddrive.
    (5)
    Buy a flash card.

  • Satellite L300 - after Win8 load DVD drive is not working

    I have just loaded Windows 8 on my Satellite L300. The DVD no longer works with an error message 39 it says the driver is corrupt. Also external attached DVD's are not recognised. I cannot find a driver to reload.
    Any suggestions.
    Regards

    Check this article:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
    If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software
    So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.

  • Satellite P25-S520 - DVD drive is not working properly

    Fix DVD Drive or buy external drive
    My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
    I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
    An attempt at updating the driver was also unsuccessful.
    I was able to rip a music CD last night so that at least is working correctly.
    Does anybody know how I can fix this? The important part is being able to load my new program.
    Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
    Thank you for any help,
    Humbaba3000BC
    Satellite P25-S520
    PIONEER DVD-RW DVR-K12D
    Driver Provider: Microsoft
    Driver Date: 7/1/2001
    Driver Version: 5.1.2535.0
    Digital Signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.
    However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
    So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

  • Dvd player does not work after Leopard upgrade

    I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger.  Since the upgrade, my DVD player does not work.  I have problems burning some cd's too.  Is this a known issue?  What is the fix?

    I have read a couple of complaints like that, but not sure it's widespread.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

  • My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

    My DVD player will not work. I am unable to install the snow leopard 10.6.3 because of it.

    Do you have a friend with an Intel Mac. If your MacBook and their Mac have firewire ports you can install by Target Disk Mode. You'll need a retail version of SL to do this with any Mac other than a MacBook.
    Start up your friend's Mac with your install disk. After you get to the install screen on your friend's Mac connect your MacBook to your friend's Mac in "Target Mode"with a firewire cable http://support.apple.com/kb/HT1661
    Then open "Disk Utility" from the "Utilities Menu" on the Menu Bar from the install disk on your friend's Mac. You should see both your MacBook and your friend's Mac hard drives in there. Erase and partition your MacBook drive and then choose that drive when you go back to the install screen. Or install over your existing OS on your drive if you have applications you want to keep.
    The only other way is to buy an external DVD drive on eBay. http://shop.ebay.com/i.html?_nkw=firewire+external+dvd+drive&_sacat=0&LH_BIN=1&_ sop=15&_dmpt=Apple_Laptops&_odkw=usb+external+dvd+drive&_osacat=0&_trksid=p3286. c0.m270.l1313 or at MacSales http://eshop.macsales.com/shop/firewire/optical-drives/
    And of course be sure your Macbook meets the system requirements. To upgrade to Snow Leopard or install Snow Leopard for the first time, you must have a Mac with:
    An Intel processor.
    An internal or external DVD drive, or DVD or CD Sharing.
    At least 1 GB of RAM (additional RAM is recommended).
    A built-in display or a display connected to an Apple-supplied video card supported by your computer.
    At least 5 GB of disk space available.

  • Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

    I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

    Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

  • My external Iomega DVD drive does not read DVDs. Why?

    My external Iomega DVD drive does not read DVDs. Why?

    what does this question have to do with a mac?  post in the Iomega fourms.

  • WHAT IS IT THAT MY CD-DVD PLAYER IS NOT WORKING

    ONE OF MY MC COMPUTERS CD-DVD PLAYER IS NOT WORKING PROPERLY, DOES NOT START THE CD-DVD.. SINCE IS NO DRIVE IN THERE..

    http://support.apple.com/kb/HT2801

  • My mac book pro fell of my desk, everything seems fine, but the dvd drive is not working properly, any suggestions

    My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow apple users?

    Back up EVERYTHING, then take it in to have them assess for any latent damage. Wouldn't want a similar "delayed reaction" from the hard disk drive, would we? 

  • External display monitor suddenly is not working; power is on

    Hello,
    My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
    Is this monitor just suddenly broken, perhaps through it's internal connection devices??
    Thanks!!
    alidocs

    Dear Shankar,
    Issue is solved. It was Program Error from SAP side.
    Now All the buttons are working fine and I am able to print PDF also.
    Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
    System Details : ECC 6.0 NetWeiver 7.4 ,
                                EHP 7 , SP-Level 06
    Thanks a lot for all your suggestions.
    Regards,
    Namsheed.

  • CD/DVD reader is not working, please help.

    My cd/dvd reader is not working at all, when I put any cd or dvd on it, the led of the reader starts blinkin but then it stops and nothing happens. I'm using a hp pavilion dv7-1025nr, windows vista 64-bit. Maybe there are some drivers that i should download, in that case, can some one help me with link?, Thanks.

    When you access this page from the link, ensure that this is your machine by entering your Model # and then trying your Product # (both on the Service Tag on the bottom of your computer). This will confirm your Model#/Product# for future updates.
    HP Support & Drivers Page for Your Machine
    Sig: Pavilion Model Series# dv9500t (t=Intel)_CTO_Prod# RL653AV_Vista Ultimate (64-bit)_SP1_Intel 2 Duo CPU T7500_2 GB Ram_BIOS F.09_NVIDIA 8600M GS_200GB 7200RPM SATA Dual HD (100GBx2)_HP 300GB HD USB Kit for xb3000_8/2007

Maybe you are looking for