External LaCie HD to display both its Mac and PC partitons. HOW?

My external HD (LaCie 250 Gb) is partitioned this way:
180 Gb - Mac formatted
70Gb - PC formatted
The partition has been done a few years back with Mac OSX 10.2 using its standard disk utility - that’s all I know about tech details of this setup.
The only problem is that when I plug this LaCie 250 Gb into my MacBookPro , only Mac partition is visible.
PC formatted partition does not appear at all.
(My Mac displays any other external PC formatted drives without any problems)
How to make this external LaCie HD to display both its Mac and PC partitions on my Mac?
Thank you all who help me!

The PC partition is FAT32.
The program you suggested is commercial but I just can't afford to spend on software that may or may not be suitable...
Any other options to see this PC partition on my Mac, fellow Mac users?

Similar Messages

Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

Apple shop changed my iphone 3gs today, got home and cannot join my wifi. both my mac and ipad is working on wifi. tried rebooting, resetting still doesnt hold the wifi, it's there for a sec then its not connected.help please?

Hi,
Apple shop exchanged my iphone 3gs today. got home but it doesnt pick up the wifi. first the correct supplier appears then it says not connected.
both my mac and ipad is working on wifi (so did the previous phone) i ve tried rebooting, tried reset supplier...nothing works. can someone help please?
thanks

Yes, they should be able to verify that WiFi is working properly. If I just got a new phone & it didn't work perfectly, right out of the box, before I started restoring or whatever, I'd be right back where I got the phone.

External Hard drive help: use with mac and pc? how to backup everything etc

Hello! I need some help regarding a new external hard drive I got from OWC. It is a 500 gb firewire 400 + usb 2.0 7200 rpm hard drive. I am running it from firewire. The software suggests the first thing you do is make a clone of your macbooks internal hard drive, that way if it fails later you can use the external to back everything up. If I do this ...
1. do I have to make the drive "Bootable" ? I have software called Data Backup 3 by Pro soft I think. It came with my external.
2. Can I still back up other stuff like my audio recordings and record onto that drive to a seperate folder?
3. If I make a bootable copy will it try and boot from the drive everytime I turn it on or something?
My other question is... how can I use this drive with a pc? I have a pc as well and I heard that the only way it will work is to format it in ms-dos mode (fat32?)
If I write it to fat32 will it slow down my drive or make it worse? I heard that you should format external drives specifically for mac if you have a mac; so it will only work with macs...
(sorry this is going on and on; it's like a chain reaction of questions)
so If its formatted to mac drive format then can I do this with my current situation:
1. I have wireless internet, the router is on a pc downstairs
2. Can I send files over a network somehow from the pc to my mac
3. then store it on my external?
If so can someone point me in that direction with a link?
Thank you for reading, sorry for making this so long.

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Can one network hard drive back up both a Mac and a PC? What file system?

We have both a Mac and a PC on our home network. I would like to use a network external drive to back them both up, instead of connecting each to its own external drive for backups. Iomega makes one, for example.
The external drives I see advertised say that they are both Mac and PC compatible, but don't explicitly say that you can connect both at the same time. Can you?
If so, what file system does the network drive use? Does it have a partition, one side with HFS for Mac and the other with NTFS for Windows? Is this really workable?
And most importantly, will such a network drive work with TM?
Confused,
Barb

I have a late 08 MackBook Pro and several Vista & XP machines. I currently backup the MBP and the primary Vista machine to a 1 TB drive attached via USB to an Airport Extreme router. No problems backing both up through the APE to the USB drive.
The one thing I read when getting ready to set this up is that I should format the drive with the Apple file system, not one of the Microsoft file systems. I did (did it as an external drive off the MBP), and had no subsequent problems with Time Machine backups or Vista backups (using Acronis True Image).

How do I connect both a Mac and PC to Apple TV Home Sharing?

Goal
- I am trying to share both my PC and Mac through my Apple TV2 on the "Computers" home sharing menu.
- These are 2 seperate iTunes accounts as they are 2 different owners of the PC and Macbook.
- However, home sharing only allows me to have one at a time, can I not have 2 computers connected?
(The menu is in fact plural and says "Computers" not "Computer")
Attempt
-I turn on home sharing on my PC with my PC iTunes account, it then shows up on the "Computers" list as PC
-I turn on home sharing on my Mac with my Mac iTunes account, it then shows up on the "Computers" list as Mac, but it deletes the PC share
Troubleshoot
-So I started from scatch and connected the PC share with my PC itunes account, it shows up,
-Then I connect the Mac home sharing with the same iTunes login as my PC, but it also erases my PC from the "Computers" list and just displays the Mac.
Question
-How do I connect both a Mac and PC to Apple TV Home Sharing?
-I want them both to show up in the "Computers" list.
-So the final result will look like this on my Apple TV menu:
Computers
-PC
-Mac
whew... I'm out of breath... I hope there is an Apple Genius out there that can help.
Thanks!

After retrying the home share with the SAME ITUNES ACCOUNT ON HOME SHARING I finally got it to work.

Creative Cloud both on Mac and Windows on a second computer

Is it possible to use Creative Cloud both on Mac and Windows on a second computer with one license? At home I work with Mac, and out I work with Windows.

In 2.1.5 of the Software License Agreement it says that you have to own tow separate licenses if you use Mac and Windows on one computer. Is this not also the case if you have two computers, one operating with Mac and one operating with Windows?
2.1.5 Dual Boot Platform. The Software is licensed for use on a specific operating system platform. Customer
must purchase a separate license for use of the Software on each operating system platform. By way of example,
if Customer desires to install the Software on both the Mac OS and Windows operating system platforms on a
device that runs both of those platforms (i.e., a dual boot machine), then Customer must first obtain two separate
licenses for the Software. This is true even if two versions of the Software, each designed for a different operating
system platform, are delivered to Customer on the same media.

Can I use my iPod with BOTH a Mac and PC???

Might be an odd question and forgive me if it is an obvious answer. I just got a 30 gigger and connnected it up and charged it with my Mac mini at home last night. I have lots of music on my iTunes on my home Mac mini and I have some music on my work Dell Laptop(with iTunes). What would be the best way to sync up my two iTunes libraries (one on my Mac, the other on the Dell lapper) to the iPod, or is it even possible to use it interchangeably with both the Mac and PC??

Yes, you can.
Read through the following article, and make sure your iPod is Windows-formatted using the iPod Updater utility on Windows.
http://docs.info.apple.com/article.html?artnum=61675

Trying to use portable hard drive on both my Mac and PC...

I just purchased a Toshiba Canvio Plus 1TB portable hard drive for my three Macs. Out of the box, I need to format the drive for Mac, which is fine, but I just found out that my fiance would also like to use it for her work computer, which is a PC running Windows XP. I need your help in finding out how to read and write to this portable drive from both a Mac and PC.
I thought about partitioning the drive but that wouldn't work because we want both systems to access the same data. After doing a few Google searches, I thought formatting the drive to a FAT32 would be the answer but I read that file sizes can't exceed 4GB. Since I purchased this specifically to complement my new HD camcorder, a 4GB file size limit will not work for us.
One last thing, since she has a company-issued PC, I'm pretty sure she's unable to install third party software and/or drivers. So please factor that in.
What would be our best solution? Thank you so much for all your help.
Message was edited by: madeinguam

madeinguam wrote:
What would be our best solution?
two possible ways:
(a) format the drive for Mac and install MacDrive on the winsloth machine(s)
(b) format the drive NTFS and install the _*NTFS 3G*_ driver on the Mac(s)
JGG

After backup, TM cannot eject itself automatically, and then both my mac and TM get high temperature. why is that, I had the same problem twice.

after backup, TM cannot eject itself automatically, and then both my mac and TM get high temperature. why is that, I had the same problem twice. I re-start my mac, it doesn't work at tall, still the same problem.

Are you saying, right now that the TM refuses to work even after a re-boot?
Is the light solid green at least?

Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

Hi, I have tried to use FaceTime using both my Mac and iPhone, it showed it was connecting, but can't not be connected, and it will just show call failed. could you please look into it? thanks

There is an issue with facetime at the moment http://www.idownloadblog.com/2014/04/17/facetime-connectivity-issues-reaching-ma ny-ios-users/

Display Both Excise Tab And Customized Tab in MIGO header screen

I want to display both Excise tab and My customized tab in header screen in MIGO..But I have seen at a time one tab is displaying.Can anybody tell me
how I want to diplay both tab at a time??

Hi DEBDATTA PANDA,
In MIGO - Excise tab is showing as a part of customization. In PO if tax values are available that values will show in migo(drop down will show capture/refer /capture+post few more ) under excise tab.
pre req. is mat + Vendor +plant need to be excisable .
Now on your Customized tab is purely a Z development.only you can tell .
Also , if you are not seeing excise tab in migo , it means either config or master data missing for material code , Vendor, Plant
regards
manu

Can i instal cc on both my mac and windows laptop?

can i instal cc on both my mac and windows laptop?

Hi Aephoto,
Yes, you can install and activate Creative Cloud desktop applications only on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership.
For more info please refer to http://www.adobe.com/products/creativecloud/faq.html
Thanks!
Eshant

If I purchase Acrobat XL pro can I use it on both my Mac AND PC?

If I purchase XL Pro, can I use it on Both my mac AND PC?

One off puchase: no.
Subscription: yes. Up to two computers, for your own personal use, not at the same time.

My mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

my mac has stopped connecting to the wireless printer. However both the mac and the printer indicate that they are connected. What can I do to correct this issue?

Maybe this???
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

External LaCie HD to display both its Mac and PC partitons. HOW?

Similar Messages

Maybe you are looking for