External LaCie Multi Recorder causing kernel panics since reloading OS
I just replaced my main internal hd with a new 1TB WD Caviar Black. I migrated all of my user information from my old drive via Time Machine & all seemed well. Since I did a fresh, zero out data install of the OS on the new drive, I need to reinstall my programs. Some of my older programs are kept on DVD-RAM disks that I've had since my old G4. To access these files I use my LaCie Multi recorder which was working fine prior to the HD switch.
When I put my DVD-RAM disk into the drive it's now causing kernel panics.
Anyone know what could have caused this or how I might correct the problem?
Thanks.
Okay, it seems that I've got a bad disk. I connected the drive to my laptop & used another dvd & all worked as it should. Put my program back-up disk in & it caused a panic.
New question, is there any way to repair the disk?
I've got DiskWarrior & TechTool Deluxe but I'm not sure how I might go about the repair as the panic occurs while the drive is trying to access the disk.
Similar Messages
-
External Display Causing Kernel Panic
I have had a Samsung monitor hooked up to my ~2008 iMac (Intel; see below for more information) for about 3 months and I've had no problems. A week ago, I started getting the "You Need to Restart your Computer" screen due to a kernel panic. I followed Apple's directions for troubleshooting a kernel panic (http://support.apple.com/kb/TS3742), and I narrowed the problem down to my external Samsung display.
The kernel panic happens every time my external display is connected and the screen saver has been on for about 8-10 minutes. I only get a kernel panic when the external display is connected. See below for my computer information and the kernel panic log. How can I fix this problem?
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
Hardware UUID: 00000000-0000-1000-8000-001B63B25192
Kernel Panic Log:
Interval Since Last Panic Report: 706 sec
Panics Since Last Report: 2
Anonymous UUID: 87195EA1-746B-4068-808E-A8277AFA6070
Sun Mar 4 23:52:33 2012
panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00d4545d, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x0119b000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000036, ECX: 0x044b0d94, EDX: 0x0001a5e0
CR2: 0x00000000, EBP: 0x00108b18, ESI: 0x04794440, EDI: 0x00108ff0
EFL: 0x00010006, EIP: 0x00d4545d, CS: 0x00000008, DS: 0x00520010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x108918 : 0x12b4c6 (0x45f91c 0x10894c 0x13355c 0x0)
0x108968 : 0x1ab0fe (0x469a98 0xd4545d 0xe 0x469248)
0x108a48 : 0x1a1713 (0x108a60 0x108ab4 0x108b18 0xd4545d)
0x108a58 : 0xd4545d (0xe 0x286f0048 0x10 0x10)
0x108b18 : 0xd45fa4 (0x0 0x2f 0x12 0x0)
0x108b58 : 0xd46109 (0x0 0x0 0x0 0x528ce8)
0x108cb8 : 0xd46267 (0x1 0x4 0xd50d7c 0x0)
0x108cf8 : 0xd46085 (0x4 0xd50d7c 0x0 0x0)
0x108d38 : 0xd3a71f (0xd523e8 0xd52ebc 0x0 0x0)
0x108d98 : 0xd33912 (0x43cb410 0x108e58 0x1 0x1)
0x108dd8 : 0xd35ec8 (0x43cb410 0xd5843c 0x108e58 0x40)
0x108e08 : 0xd35efd (0x43cb410 0x8 0x108e58 0x0)
0x108e38 : 0xd32b1b (0x43cb410 0x8 0x108e58 0x49f78b8)
0x108ea8 : 0xd41d66 (0x43cb410 0xd568b4 0x10c60 0x6)
0x108ed8 : 0xd1a2b3 (0x4bb5954 0x3de13c50 0xd 0xd568b4)
0x108f08 : 0x6aacbd (0x4794440 0x36 0x23eff000 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.kext.ATY_Hypoprion(5.4.8)@0xce5000->0xd5ffff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0x6a0000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5ce000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x683000
dependency: com.apple.iokit.IOACPIFamily(1.2.0)@0x627000
com.apple.iokit.IONDRVSupport(1.7.3)@0x6a0000->0x6adfff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5ce000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0x683000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: iMac7,1 (Mac-F4238CC8)
System uptime in nanoseconds: 1421066020480
unloaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last unloaded 125555815961
loaded kexts:
com.apple.driver.InternalModemSupport 2.4.0 - last loaded 18399940146
com.apple.driver.AppleHDAPlatformDriver 1.7.1a2
com.apple.iokit.IOBluetoothSerialManager 2.1.8f2
com.apple.filesystems.autofs 2.0.2
com.apple.driver.AppleUpstreamUserClient 2.7.5
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.1a2
com.apple.driver.AppleHDA 1.7.1a2
com.apple.kext.ATY_Hypoprion 5.4.8
com.apple.driver.AppleHWSensor 1.9d0
com.apple.Dont_Steal_Mac_OS_X 6.0.3
com.apple.driver.AppleGraphicsControl 2.8.15
com.apple.driver.AppleTyMCEDriver 1.0.0d28
com.apple.driver.AppleHDAController 1.7.1a2
com.apple.iokit.IOFireWireIP 1.7.7
com.apple.driver.AudioIPCDriver 1.0.6
com.apple.ATIRadeonX2000 5.4.8
com.apple.driver.AppleIRController 113
com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17
com.apple.driver.AppleLPC 1.3.1
com.apple.driver.AppleBacklight 1.6.0
com.apple.driver.CSRUSBBluetoothHCIController 2.1.8f2
com.apple.driver.AppleUSBHIDMouse 1.2.4b3
com.apple.driver.AppleHIDKeyboard 1.0.9b4
com.apple.driver.CSRHIDTransitionDriver 2.1.8f2
com.apple.driver.iTunesPhoneDriver 1.0
com.apple.iokit.IOUSBMassStorageClass 2.0.8
com.apple.driver.AppleUSBMergeNub 3.4.6
com.apple.driver.PioneerSuperDrive 2.0.9
com.apple.iokit.SCSITaskUserClient 2.1.1
com.apple.driver.XsanFilter 2.7.91
com.apple.driver.AirPortBrcm43xx 366.91.21
com.apple.driver.AppleFileSystemDriver 1.1.0
com.apple.iokit.IOAHCIBlockStorage 1.2.2
com.apple.iokit.IOATAPIProtocolTransport 1.5.3
com.apple.driver.AppleFWOHCI 3.9.7
com.apple.driver.AppleUSBHub 3.4.9
com.apple.iokit.IOUSBUserClient 3.4.9
com.apple.driver.AppleAHCIPort 1.7.0
com.apple.driver.AppleIntelPIIXATA 2.0.1
com.apple.driver.AppleUSBEHCI 3.4.6
com.apple.driver.AppleUSBUHCI 3.3.5
com.apple.iokit.AppleYukon2 3.1.13b2
com.apple.driver.AppleEFINVRAM 1.2.0
com.apple.driver.AppleRTC 1.2.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIPCI 1.2.5
com.apple.driver.AppleACPIButtons 1.2.5
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.2.5
com.apple.driver.AppleAPIC 1.4
com.apple.security.seatbelt 107.12
com.apple.nke.applicationfirewall 1.6.77
com.apple.security.TMSafetyNet 3
com.apple.driver.AppleIntelCPUPowerManagement 76.2.0
com.apple.driver.DiskImages 199
com.apple.BootCache 30.4
com.apple.iokit.IOSerialFamily 9.4
com.apple.driver.DspFuncLib 1.7.1a2
com.apple.iokit.IOHDAFamily 1.7.1a2
com.apple.iokit.IOAudioFamily 1.6.9fc5
com.apple.kext.OSvKernDSPLib 1.1
com.apple.driver.IOPlatformPluginFamily 3.4.0a17
com.apple.driver.AppleSMC 2.3.1d1
com.apple.iokit.IONDRVSupport 1.7.3
com.apple.iokit.IOGraphicsFamily 1.7.3
com.apple.driver.AppleUSBBluetoothHCIController 2.1.8f2
com.apple.iokit.IOBluetoothFamily 2.1.8f2
com.apple.driver.AppleHIDMouse 1.2.4b3
com.apple.iokit.IOUSBHIDDriver 3.4.6
com.apple.driver.AppleUSBComposite 3.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1
com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1
com.apple.iokit.IOBDStorageFamily 1.5
com.apple.iokit.IODVDStorageFamily 1.5
com.apple.iokit.IOCDStorageFamily 1.5
com.apple.iokit.IO80211Family 216.1
com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1
com.apple.iokit.IOFireWireFamily 3.4.9
com.apple.iokit.IOAHCIFamily 1.5.0
com.apple.iokit.IOATAFamily 2.0.1
com.apple.iokit.IOUSBFamily 3.4.9
com.apple.iokit.IONetworkingFamily 1.6.1
com.apple.driver.AppleEFIRuntime 1.2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.iokit.IOStorageFamily 1.5.6
com.apple.iokit.IOHIDFamily 1.5.5
com.apple.driver.AppleACPIPlatform 1.2.5
com.apple.iokit.IOACPIFamily 1.2.0
com.apple.iokit.IOPCIFamily 2.6Solution: The GPU heat sink temperature sensor was faulty. I couldn't figure out what part number the temperature sensor was, so I just ordered a new GPU heat sink off e-bay for $12. The heat sink assembly contains the temperature sensor. I installed the heat sink (including removing/applying thermal paste), and voila! The kernel panics are gone. The faulty heat sink temp sensor was causing the temp. to read hotter than it actually was, so when it read too hot (GPU diode ~120 Celsius), I got a kernel panic.
After I installed the new heat sink (with new GPU heatsink temp. sensor), the GPU temperatures read normal, and the Apple Hardware Test showed no problems (before it was giving an error code of 4SNS/1/40000000:TG0H).
Ahh, the sweet satisfaction of fixing this problem myself for $12 without ever having to deal with Apple. -
RAID mirror with software utility caused kernel panic every time
Using disc utility to make a mirror of 2 drives, click create and i get kernel panic and have to power off machine. if i try to start the machine with either of the two disks in it (together or individually) i get same kernel panic and have to power off.
The disks are in an external storage array (sonnet d500). I have a second storage array with raided disks in and i have raided disk inside the mac too. these all work fine..
originally 2 weeks ago i had the 2 disks working in a group of 4 disks set as a mirror of 2 striped disks. One disk in this setup failed and with this config you can never 'recover'or rebuild it - you get a degraded mirror and you can backup the data, but you must completely rebuild the raid again as the mirror of stripes never lets you add a new disk in again.period. not good.
I replaced the failed disk and rebuilt the mirror of stripes. this lasted a day until a second disk failed (all 4 were bought at same time so i was kind of expecting that to happen once one failed).
i replaced the second faulty hdd and thought about my disk usage and decided i would not make another mirror of stripes and i would make 2 mirrors instead for safe-ish storage and then transfer data to a striped raid set for editing from instead of direct from the mirror of stripes volume.
i tried to delete the raid but got a kernel panic
if i started the machine with any of the 4 disks i would get a kernel panic.
i moved the disks one by one into an older G5 running Tiger and managed to erase the raid info on 2 of them. The two new ones had some strange raid info and the Tiger machien thought there was an extra disk in the machine and would not erase or partition or allow me to destroy the raid whatever i tried.
I will be moving these now into an old XP PC to try to erase the boot records etc and erase them to be able to use them again in either mac pro or G5. painful..
so.. i ended up with 2 erased drives and have 2 new drives with dodgy raid info that causes kernel panics on the leopard machine and wont go in the Tiger machine.
The two erased drives are what ive now been trying to use in the mac pro to create a mirror - this now caused kernel panics when creating the mirror to start with and when installed in the machine at all. so i will be erasing them again in the tiger machine soon (its busy erasing with zeros another new disk that i added to the Tiger machine 2 weeks ago which seems to have some fault when raided!!! but thats another story).
so.. is anyone else having problems with creating basic mirror in 10.5.4 or is it just me??
i have a sonnet tempo e4p card with 2 external sata disk enclosures, latest firmware for the e4p card. all other previously existing raid volumes are working fine. i have one set of 2 striped disks, one set of 3 striped disks and one set of 2 stripes which are mirrored - all happy and working fine. but i cant make a new mirror of 2 disks...
I phoned Apple support and they said all raid info was kept on the disk itself and nothing on the actual machine and suggested i take the machine to an apple care centre for some tlc (although its disk i am having a problem with). since all my other disk arrays work fine i don't really want to rebuild the whole machine from scratch if i can avoid it.
Any suggestions of what i can try ??well it turns out the new disk i bought just werent any good. my g5 powermac raid mirror issue was related to one new disk with lots of bad blocks (speed tools showed that up) so i have learnt my lesson on cheap non raid disks for raid..
am waiting on a couple of new ultrastar enterprise disks to tuen up so i can go back to the macpro and try to add a mirror again.
i am still stuck wih several new disks that i cannot format now in the macpro on leopard or on the g5 powermac with tiger.
ive tried softraid and that cant do it, speedtools pcformat util cant do it, disk utility crashes when i try to eras them and diskutil from termianl starts then doenst get anywhere and my pc sata card doesnt work so my last resort pc option still doesnt help me clear the partition map on these drives - ones that diskutility on leopard made for me - and drives which still cause kernel panics on the macpro if i put them in it..
here is what diskutil says on my g5:
/dev/disk0
#: type name size identifier
0: GUIDpartitionscheme *465.8 GB disk0
1: EFI 200.0 MB disk0s1
2: Apple_RAID 465.4 GB disk0s2
3: Apple_Boot 128.0 MB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk1
1: Applepartitionmap 31.5 KB disk1s1
2: Apple_HFS Macintosh HD 233.6 GB disk1s3
/dev/disk2
#: type name size identifier
0: *465.4 GB disk2
/dev/disk3
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk3
1: Applepartitionmap 31.5 KB disk3s1
2: Apple_HFS backup1T 931.4 GB disk3s3
/dev/disk4
#: type name size identifier
0: Applepartitionscheme *931.5 GB disk4
1: Applepartitionmap 31.5 KB disk4s1
2: Apple_HFS tempi 931.4 GB disk4s3
disk0 is the one with the bad partition info.
it thinks it has a double raid as the console shows on startup:
(both store45 and cache it thinks are on this disk - cache was my old mirror of stripes set on other machine, store45 was new name for my mirror, so seems like it hadnt deleted the original raid partition info before making new info which now kernel panics)
Jul 18 18:48:05 localhost kernel[0]: AppleRAID::degradeSet - starting the set "STORE45" (B9C48619-6B2C-4547-A01E-4864754EA7E2).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::degradeSet - starting the set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B).
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "STORE45" (C0E139A4-2A6D-49C6-8F77-202AF7F9285D), member 50207BE5-E487-410E-8E8E-C4C4DCD2687B, set byte offset = 999527018496.
Jul 18 18:48:35 localhost kernel[0]: AppleRAID::completeRAIDRequest - error 0xe00002c2 detected for set "CACHE" (64F914A5-5556-4A44-AEE2-DC437868766B), member C0E139A4-2A6D-49C6-8F77-202AF7F9285D, set byte offset = 999527018496.
so currently i have 2 new 500gb disks which cant be partitioned back to anything at all on either machine. looks like i will have to buy a new pc to reformat them..
any suggestions of how to clear the partition map info and get them back to freespace ?? -
PS Extended CS6 causing kernel panics
I've been getting one or two a week. Haven't figured out yet what triggers it, but it only happens in CS6. I did recently reinstall the entire OS, so that's clean. Here's the latest panic info the reboot generates to send to Apple. Doesn't mean anything to me, other than the panic notation near the top of the info tells you what it thinks happened.
Interval Since Last Panic Report: 141469 sec
Anonymous UUID: 44199F46-5B6B-42C5-9E13-29CB09291223
Mon Sep 24 14:40:11 2012
panic(cpu 2 caller 0xffffff80002094e7): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.15.3/osfmk/kern/sched_prim.c:1471
Backtrace (CPU 2), Frame : Return Address
0xffffff8149e83d70 : 0xffffff8000204d15
0xffffff8149e83e70 : 0xffffff80002094e7
0xffffff8149e83ef0 : 0xffffff8000209acb
0xffffff8149e83f60 : 0xffffff800053b02d
0xffffff8149e83fa0 : 0xffffff80002c8527
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26760035257178
unloaded kexts:
com.apple.iokit.IOFireWireSBP2 4.0.6 (addr 0xffffff7f80e4a000, size 0x73728) - last unloaded 25651433036012
loaded kexts:
com.aladdin.kext.aksfridge 1.0.2
com.dvdfab.kext.fabio 1
com.hzsystems.terminus.driver 4
com.microsoft.driver.MicrosoftKeyboardUSB 8.2
com.microsoft.driver.MicrosoftKeyboard 8.2
com.Logitech.Control Center.HID Driver 3.6.0
com.apple.filesystems.afpfs 9.7.1 - last loaded 23445647212129
com.apple.nke.asp_tcp 5.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.31
com.apple.driver.AppleUpstreamUserClient 3.5.7
com.apple.driver.AppleMCCSControl 1.0.20
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.kext.ATIFramebuffer 6.3.6
com.apple.driver.AppleHDA 2.0.5f14
com.apple.driver.AppleMikeyDriver 2.0.5f14
com.apple.driver.AudioAUUC 1.57
com.apple.filesystems.ntfs 3.4
com.apple.ATIRadeonX3000 6.3.6
com.apple.filesystems.autofs 2.1.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1
com.apple.driver.AppleLPC 1.5.1
com.apple.iokit.IOAHCIBlockStorage 1.6.4
com.apple.iokit.SCSITaskUserClient 2.6.8
com.apple.BootCache 31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleFWOHCI 4.7.3
com.apple.driver.AppleUSBOHCI 4.2.0
com.apple.driver.AppleUSBHub 4.2.4
com.apple.driver.AirPortBrcm43224 428.42.4
com.apple.driver.AppleAHCIPort 2.1.7
com.apple.driver.Intel82574L 2.1.8b1
com.apple.driver.AppleUSBEHCI 4.2.4
com.apple.driver.AppleUSBUHCI 4.2.0
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleACPIButtons 1.3.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.14
com.apple.driver.AppleIntelCPUPowerManagement 142.6.0
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 2.0.5f14
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IONDRVSupport 2.2.1
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI5000Controller 6.3.6
com.apple.kext.ATISupport 6.3.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.4.5f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.0.5f14
com.apple.iokit.IOGraphicsFamily 2.2.1
com.apple.iokit.IOHDAFamily 2.0.5f14
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d5
com.apple.driver.IOPlatformPluginFamily 4.7.0a1
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3
com.apple.driver.IOBluetoothHIDDriver 2.4.5f3
com.apple.iokit.IOBluetoothFamily 2.4.5f3
com.apple.iokit.IOUSBHIDDriver 4.2.0
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6.1
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IOAHCISerialATAPI 1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IOUSBUserClient 4.2.4
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IONetworkingFamily 1.10
com.apple.iokit.IOUSBFamily 4.2.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.6
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289.1
com.apple.iokit.IOStorageFamily 1.6.3
com.apple.driver.AppleACPIPlatform 1.3.6
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacPro5,1, BootROM MP51.007F.B03, 6 processors, 6-Core Intel Xeon, 3.33 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
PCI Card: pci104c,823f, sppci_ieee1394openhci, Slot-3@6,0,0
PCI Card: pci1033,35, sppci_usbopenhost, Slot-3@8,0,0
PCI Card: pci1033,e0, USB Enhanced Host Controller, Slot-3@8,0,1
PCI Card: pci1033,35, sppci_usbopenhost, Slot-4@11,0,0
PCI Card: pci1033,35, sppci_usbopenhost, Slot-4@11,0,1
PCI Card: pci1033,e0, USB Enhanced Host Controller, Slot-4@11,0,2
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: HL-DT-ST BD-RE GGW-H20L
Serial ATA Device: WDC WD1001FALS-41Y6A1, 931.51 GB
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: WDC WD3200AAKS-00VYA0, 298.09 GB
USB Device: Hub, 0x0409 (NEC Corporation), 0x005a, 0xfd300000 / 2
USB Device: EIZO USB HID Monitor, 0x056d (Eizo), 0x0002, 0xfd330000 / 3
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x40400000 / 2
USB Device: HASP4 USB 1.33, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0x00200000 / 3
USB Device: SII Smart Label Printer 200, 0x0619 (Seiko Instruments Inc.), 0x0104, 0x00100000 / 2
USB Device: HASP4 USB 1.33, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0xff100000 / 2
USB Device: HASP HL 3.25, 0x0529 (Aladdin Knowledge Systems), 0x0001, 0xfe200000 / 2
USB Device: Natural® Ergonomic Keyboard 4000, 0x045e (Microsoft Corporation), 0x00db, 0x1a200000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x1d100000 / 2
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, 0xD016, Up to 200 Mb/secOnly OS bugs, driver bugs, or hardware problems can cause kernel panics.
Yes, that is normally the case. I brought this up here because while working in PS is the only time this happens. I know it doesn't make sense, but there it is.
Not sure why the crash report stated 10.8.0. It's incorrect on two counts. For one, I'm working in Snow Leopard, 10.6.8. I do have Mountain Lion installed on a separate drive for testing, but that already is at 10.8.2. Regardless, it's not the OS I was even in, so I don't know why it reported 10.8.0 as the kernel.
Anyway, I noticed (after posting this of course) that there was a 13.0.1 update for PS CS6. I applied that and we'll see how it goes from there as the update is noted as fixing a number of crashing problems. -
I have an old Agfa SnapScan 1212u USB scanner and up until today it has worked fine. Then suddenly it started causing Kernal Panics. It happens about 30% of the time. It scans the first 10% then throws up the Kernel Panic message and I'm forced to restart. I have run the Disk Repair Utility, repaired permissions, reinstalled the Agfa Scanwise driver, deleted all scanner related preferences and disconnected all other USB devices but nothing seems to work. The only software update I've done recently is the August and Java Security updates. Could either of these things be the problem? This is the first time I've had Kernel Panics on my Mac Mini. I doubt it's caused by the ram. It has worked flawlessly since I put in the 1GB module in July.
Does anyone have any ideas?
Cheers
djonWell, I downloaded Vuescan and set it up but now I have another problem. Vuescan constantly crashes. Sometimes it crashes when I'm changing settings and sometimes is crashes after a scan. I set the memory settings very high so it shouldn't be a memory issue. I've tried just about everything to get this scanner working with Vuescan. I even installed a fresh copy of Panther on my Firewire drive but it only reduced the crashes not eliminate them. I'd like to get Vuescan working because it seems to make better scans than Scanwise did. At least it doesn't cause Kernel Panics. Does anyone have any idea what's going on? I'm beginning to think that it might be a hardware problem with the scanner.
djon -
Battery Update Causing Kernel Panics?
It seems that ever since I installed the Battery Update it's been causing Kernel Panics on my MBP. Three since yesterday in fact. Has anyone else been experiencing this?
MacBook Pro 1.83 GHz Mac OS X (10.4.9) 1 GB RAM, 80 GB HDD, ATI Radeon X1600Hmm I have seen multiple posts on the computer not booting the OS (gets to the grey apple with spinning gear screen) but so far I think you are the first I have seen reporting kernel panics.
Can you boot to the install cd? I'd try running the disk utility from the install disk and verify/repair permissions and verify the disk as well. (repair disk if verification fails)
Here is an article that may help ya:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214 -
Readynas duo mounted over ethernet causes kernel panics
I've found out what is causing kernel panics on my machines, but i'm not sure how to resolve it. I have a g4 laptop and a new mac mini, both mount the readynas via mount_afp using a LoginHook. When the laptop or the mini go to sleep, the ethernet connection is powered off and at some point the readynas goes to sleep as well. So, when the laptop/mini wake from sleep, they have trouble re-establishing the mount to the readynas (as it needs time to spin it's drives up) and then the laptop/mini kernel panic...shouldn't this really be just a lost connection message, rather than a full fledged panic!
This is where we have a difference of opinion...If i can mount an external box over ethernet/firewire/usb and it causes the machine to kernel panic, then the software is not robust enough to handle the exception cases. Running 10.4.x for years with the same external hardware never yielded such results.
-
Hi all,
I've got an rt3062 chipset wireless card and it's been causing kernel panics ever since the upgrade to linux-3.0.
I was using the driver and firmware supplied by ralink and compiling it as the rt3562sta driver and it used to work great but it doesnt seem to support anything higher than kernel 2.6.39.
I'm not exactly sure which error logs to post, so...
Anybody else having this issue? and maybe find a workaround?
ThanksI am using the same combination, successfully, with kernel 3.0.7-1. I do not recall having to do anything special to get it to work.
06:00.0 Network controller: Ralink corp. Device 3062
Subsystem: Ralink corp. Device 3062
Flags: bus master, slow devsel, latency 32, IRQ 19
Memory at fbdf0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Kernel driver in use: rt2860
Kernel modules: rt3562sta, rt2800pci
Tim -
Using 2 memory modules causes kernel panic
In early 2009 I upgraded my memory from 512 to 2 GB, 2 modules of 1GB each. This past January (just shy of 2 years later) I got a kernel panic. I tested running with a single module, and one module caused panic, the other was fine. Both slots function with the good module. So I got two new matched replacement chips from OWC, put them in and got kernel panics during the boot process. Yesterday I spent testing memory configurations and found this:
1. chip 1 alone runs fine and passes all Rember memory tests in slot 1.
2. chip 2 alone runs fine in slot 1 and 2, passes all memory tests in slot 2.
3. chips 1 and 2 together, in either slot, cause kernel panics before the OS is loaded.
Has anyone seen this problem? Will it go away if I use top of the line (Apple) memory chips?
When the kernel panics started back in January, an AppleCare advanced advisor said he had the same problem and he had to remove one module to stop the kernel panics. Running on 1GB doesn't work for me because I tend to max out the memory and programs like Mail, Safari, Photoshop, etc. become unreponsive all together.
thanks -I have spent more time on the phone with OWC about this than I care to remember. Their latest request is that I use an eraser to clean the metal contacts on the chips; if that fails, I get to send the chips back. Whether I get a refund or yet another set of replacement chips, I don't know. They are not experts on Apple machines, that is clear.
-
Six kernel panics since installing Lion
So I've had six kernel panics since installing Lion on my sandy bridge MBP. Usually running safari, mail, and excel when they occur. Weird third-party process or something? I actually don't have many applications installed on this computer. Any thoughts?
Perhaps this has something to do with it but I don't know, when looking at my login items there's a flag next to iTunesHelper. I don't know what the flag means.
ThanksThe flag simply means hide this application after it automatically launches. It should have nothing to do with your kernal panic. You need to post the relevant log message for folks to analyse.
There are others who can help with that; I'm not really good at reading the logs.
Although it shouldn't be responsible, you might want to take gfxCardStatus out of your startup just in case. You can always put it back in if that's not the culprit. Others have used it without any kernal panics, so it's probably a bad WAG.
Message was edited by: sdevan -
Airport causing kernel panics and kp in safe boot.
Last week I got my first kernel panic in years. It happened while I was asleep and checking an extrenal drive for bad blocks with TechTool. It turns out that the drive indeed had bad blocks and found that the cpu was shut down when I awoke. I started up the computer and it wasn't able to stay on for more than 10 min max before the next kernel panic. I checked here for more advice on kernel panics and started to try to narrow the number of culprits. Everything was unplugged and still kp. Instaled a new drive with a week older system from Time Machine and still kp. Reset NVRAM and replaced pyhsical RAM and still kp. Removed the Airport Extreme card and still kp. Booted into Safe Mode after all of the previously mentioned and still kp. I'm now going to take the drive and swap it into another body that I have to see if the root is actually on the drive on the physical hardware of the cpu.
I was interested in this thread and read all of the links that jpl posted. Airport causing Kernel Panic (?) Jason then replied that it had been solved due to a "permissions problem" I wish he gave more info on what exactly he did to resolve the problem as it's been almost a week now without any work being done for me.
I've also noticed this very strange behavior that might shed some light onto the issue. When I open System Prefs and close the window there is a strange colored pattern that will always flash after the window has been closed. I tried to post it to my me page but for somereason it wouldn't play for me so there's that and the YouTube version too.
https://www.me.com/gallery/#100008/Prefs%20Screen
http://www.youtube.com/watch?v=2zrTt88YdBo
In addition when the computer has started up and the system loads. Checking Activity Monitor shows that there are 50 or more threads active for the the kernel_task. Inspecting this doesn't seem to show any useful information.
Finally here are a few of the recent crashes I hope that someone might be able to shed some light on this extremely frustrating problem for me.
Tue Oct 25 18:54:16 2011
panic(cpu 0 caller 0x000AE584): "Uncorrectable machine check: pc = 00000000000A388C, msr = 0000000000141000, dsisr = 42000000, dar = 0000000000272008\n" " AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000\n" " L2FIR = 0000000000000000, BusFir = 0000000080000000\n"@/SourceCache/xnu/xnu-1228/osfmk/ppc/trap.c:975
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AE584 0x000AE804 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2fc12c80)
PC=0x000A388C; MSR=0x00141000; DAR=0x00272008; DSISR=0x42000000; LR=0x000A37C8; R1=0x2E947B40; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x00000000 0x000A09C8 0x0009E2EC 0x0006B3C0 0x0006C728 0x0003BE1C
0x0029361C 0x0029364C 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x249dba00)
PC=0x9195435C; MSR=0x0000F030; DAR=0x00272000; DSISR=0x42000000; LR=0x00001FA8; R1=0xBFFFFB00; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: PubSubAgent
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Tue Oct 25 19:09:54 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 15:31:02 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000FFFFFFFF PC=0x0000000000040DE4
Latest crash info for cpu 0:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): copyin/out has no recovery point
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEB88 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x3c19ca00)
PC=0x00040DE4; MSR=0x00001030; DAR=0xFFFFFFFF; DSISR=0x40000000; LR=0x00040D94; R1=0x33B63D50; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0293EA14 0x0004147C 0x0001EB60 0x00025960 0x000B264C 0x00000000
Exception state (sv=0x3297b500)
PC=0x919419D8; MSR=0x0000D030; DAR=0x0073C000; DSISR=0x42000000; LR=0x91948900; R1=0xF00807A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: mdworker
Wed Oct 26 22:17:42 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000010 PC=0x0000000000082EF8
Latest crash info for cpu 0:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x2514ea00)
PC=0x00082EF8; MSR=0x00009030; DAR=0x00000010; DSISR=0x40000000; LR=0x00082ECC; R1=0x24F6BB60; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718
0x0006C728 0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x2509d500)
PC=0x9194AF64; MSR=0x0000D930; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE9A0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thu Oct 27 11:28:35 2011
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000000000004 PC=0x00000000000848E0
Latest crash info for cpu 0:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x248ff500)
PC=0x000848E0; MSR=0x00009030; DAR=0x00000004; DSISR=0x42000000; LR=0x000848AC; R1=0x30063BB0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000848C0 0x00077BD0 0x0007823C 0x0007920C 0x0006B718 0x0006C728
0x00296378 0x0030924C 0x000B24C8 0x00000000
Exception state (sv=0x248fd280)
PC=0x9194AF64; MSR=0x0000D030; DAR=0xE1000000; DSISR=0x42000000; LR=0x9194CC90; R1=0xBFFFE7F0; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: launchd
Thanks in advance,
MaxMy vision is pretty poor, still cant see it, but...
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
Help! Kernel panics since 10.5.3
Hi all,
I have noticed a fair amount of posts on this forum about kernel panics since installing 10.5.3, and very few responses to those problems. I wonder what is going on with 10.5.3.
I installed it a couple of weeks ago and things were running okay, but now I keep getting kernel panics or a frozen computer and having to restart. I posted about it but got no responses. I noticed in the log that it mentioned Mouseworks, so I looked it up and discovered that some people have had problems with their kensington mouse mouseworks so I uninstalled the mouseworks application . Now I got another kernel panic and this time it is about Safari. So I don't think its about a particular application, but I don't know. I did permissions repair and it repaired two permissions I think -- or at least reported a problem with them but didn't say whether it repaired them. I did disk verify and it said everything was ok.
Here are my logs.
Can anyone help or give any suggestions what I should do?
thanks,
Katarina
Sun Jun 8 12:31:35 2008
Unresolved kernel trap(cpu 0): 0x700 - Program DAR=0x0000000004240000 PC=0x000000000001EA44
Latest crash info for cpu 0:
Exception state (sv=0x18b47a00)
PC=0x0001EA44; MSR=0x00089030; DAR=0x04240000; DSISR=0x42000000; LR=0x0002596C; R1=0x18A0FE80; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x0002596C 0x000B2DCC 0x00000000
Proceeding back via exception chain:
Exception state (sv=0x18b47a00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x1ed15000)
PC=0x96972438; MSR=0x0200F030; DAR=0x04240000; DSISR=0x42000000; LR=0x96979360; R1=0xBFFFA280; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: Safari
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:51:20 PDT 2008; root:xnu-1228.5.18~1/RELEASE_PPC
System model name: PowerBook5,6
panic(cpu 0 caller 0xFFFF0007): 0x700 - Program
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B498 0x0009BE3C 0x00029DD8 0x000AF090 0x000B2A78
Proceeding back via exception chain:
Exception state (sv=0x18b47a00)
PC=0x0001EA44; MSR=0x00089030; DAR=0x04240000; DSISR=0x42000000; LR=0x0002596C; R1=0x18A0FE80; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x0002596C 0x000B2DCC 0x00000000
Exception state (sv=0x1ed15000)
PC=0x96972438; MSR=0x0200F030; DAR=0x04240000; DSISR=0x42000000; LR=0x96979360; R1=0xBFFFA280; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: Safari
Hi, ever since I installed leopard my computer keeps freezing. and it has now done it twice in the last day. I did a permissions repair and it is still doing it. My powerbook is old and was inherited and I am thinking of replacing it, but would like to know if it is something wrong with the computer or with conflicting programs, before bothering to replace it. Its a G4 1.67 GHz with 768 MB ram and 74.41 GB of which 30.31 are available.
I'm not very computer savvy and could really use some help figuring out what is going on. Here are the alerts that the computer posted when the system quit. I hope one of you more knowledgeable people can tell me whats going on.
thanks so much,
Katarina
Sat Jun 7 12:26:21 2008
Unresolved kernel trap(cpu 0): 0x700 - Program DAR=0x0000000018EC6000 PC=0x00000000000B2EA4
Latest crash info for cpu 0:
Exception state (sv=0x2743a000)
PC=0x000B2EA4; MSR=0x00089030; DAR=0x18EC6000; DSISR=0x42000000; LR=0x000AED88; R1=0x1DD8BE40; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x000249E8 0x000B05D4
Proceeding back via exception chain:
Exception state (sv=0x2743a000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2fad4280)
PC=0x96972438; MSR=0x0000F030; DAR=0x12E4CA18; DSISR=0x0A000000; LR=0x96979360; R1=0xBFFFEE10; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: MouseWorks Backg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:51:20 PDT 2008; root:xnu-1228.5.18~1/RELEASE_PPC
System model name: PowerBook5,6
panic(cpu 0 caller 0xFFFF0007): 0x700 - Program
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B498 0x0009BE3C 0x00029DD8 0x000AF090 0x000B2A78
Proceeding back via exception chain:
Exception state (sv=0x2743a000)
PC=0x000B2EA4; MSR=0x00089030; DAR=0x18EC6000; DSISR=0x42000000; LR=0x000AED88; R1=0x1DD8BE40; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x000249E8 0x000B05D4
Exception state (sv=0x2fad4280)
PC=0x96972438; MSR=0x0000F030; DAR=0x12E4CA18; DSISR=0x0A000000; LR=0x96979360; R1=0xBFFFEE10; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: MouseWorks Backg
Fri Jun 6 13:54:18 2008
Unresolved kernel trap(cpu 0): 0x700 - Program DAR=0x0000000018EC6000 PC=0x00000000000B2EA4
Latest crash info for cpu 0:
Exception state (sv=0x2743a000)
PC=0x000B2EA4; MSR=0x00089030; DAR=0x18EC6000; DSISR=0x42000000; LR=0x000AED88; R1=0x1DD8BE40; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x000249E8 0x000B05D4
Proceeding back via exception chain:
Exception state (sv=0x2743a000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2fad4280)
PC=0x96972438; MSR=0x0000F030; DAR=0x12E4CA18; DSISR=0x0A000000; LR=0x96979360; R1=0xBFFFEE10; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: MouseWorks Backg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:51:20 PDT 2008; root:xnu-1228.5.18~1/RELEASE_PPC
System model name: PowerBook5,6
panic(cpu 0 caller 0xFFFF0007): 0x700 - Program
Latest stack backtrace for cpu 0:
Backtrace:
0x0009B498 0x0009BE3C 0x00029DD8 0x000AF090 0x000B2A78
Proceeding back via exception chain:
Exception state (sv=0x2743a000)
PC=0x000B2EA4; MSR=0x00089030; DAR=0x18EC6000; DSISR=0x42000000; LR=0x000AED88; R1=0x1DD8BE40; XCP=0x0000001C (0x700 - Program)
Backtrace:
0x000249E8 0x000B05D4
Exception state (sv=0x2fad4280)
PC=0x96972438; MSR=0x0000F030; DAR=0x12E4CA18; DSISR=0x0A000000; LR=0x96979360; R1=0xBFFFEE10; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: MouseWorks Backg
did permissions repair -- says
Repairing permissions for “Silver”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Group differs on "private/etc/cups", should be 0, group is 26.
Permissions repair complete
Powerbook G4 Mac OS X (10.5.3)I'd suggest uninstalling the Kensington Mouseworks software. Replace it with SteerMouse - VersionTracker or MacUpdate.
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Most applications create preference files which are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can located them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
Kernel panics since downloading Lion
Hey guys I'm getting loads of kernel panics sinc downloading Lion. Sometimes I can't even get back to the desktop after shutting down, it just crashes again on start up. Very annoying! Any advice would be greatly appreciated!
Interval Since Last Panic Report: 69192 sec
Panics Since Last Report: 4
Anonymous UUID: E30B53ED-DAB3-460A-A0C3-24B5D6B79F0F
Mon Sep 19 20:28:10 2011
panic(cpu 1 caller 0xffffff80002c268d): Kernel trap at 0xffffff7f81f14d71, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00007f9eb282a000, CR3: 0x000000000b523000, CR4: 0x0000000000000660
RAX: 0x00000000000018ae, RBX: 0xd5547c0b9be55e78, RCX: 0x00000000000018ae, RDX: 0xffffff80039f4370
RSP: 0xffffff80793c3788, RBP: 0x933264296aa50917, RSI: 0xffffff800c396100, RDI: 0xffffff80039f4360
R8: 0x0000000000000000, R9: 0x0000000000000040, R10: 0xffffff800c396138, R11: 0xffffff8000639d54
R12: 0x0000000000000000, R13: 0xffffff800c7b4b84, R14: 0x8121091fbccfc79d, R15: 0x980d0205c2481218
RFL: 0x0000000000010282, RIP: 0xffffff7f81f14d71, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00007f9eb282a000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80793c3440 : 0xffffff8000220702
0xffffff80793c34c0 : 0xffffff80002c268d
0xffffff80793c3660 : 0xffffff80002d7a3d
0xffffff80793c3680 : 0xffffff7f81f14d71
Unaligned frame
Backtrace terminated-invalid frame pointer 0x933264296aa50917
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[9A6699AD-486F-3A F7-89BB-3F3398BAEF3B]@0xffffff7f81f12000->0xffffff7f81f16fff
BSD process name corresponding to current thread: coreservicesd
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 26063218772
last loaded kext at 25167071595: com.apple.driver.AppleTyMCEDriver 1.0.2d2 (addr 0xffffff7f81b4b000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.40
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AppleHDA 2.1.1f12
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.1.1f12
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.GeForce 7.0.4
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleMuxControl 3.0.8
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.driver.AppleUSBTCKeyEventDriver 220.8
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.nvenet 2.0.17
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.6
com.apple.driver.AirPort.Brcm4331 511.20.10
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleUSBOHCI 4.4.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.1f12
com.apple.driver.DspFuncLib 2.1.1f12
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.nvidia.nv50hal 7.0.4
com.apple.NVDAResman 7.0.4
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3
com.apple.driver.AppleHDAController 2.1.1f12
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.iokit.IOHDAFamily 2.1.1f12
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IONetworkingFamily 2.0
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4Hey guys I'm getting loads of kernel panics sinc downloading Lion. Sometimes I can't even get back to the desktop after shutting down, it just crashes again on start up. Very annoying! Any advice would be greatly appreciated!
Interval Since Last Panic Report: 69192 sec
Panics Since Last Report: 4
Anonymous UUID: E30B53ED-DAB3-460A-A0C3-24B5D6B79F0F
Mon Sep 19 20:28:10 2011
panic(cpu 1 caller 0xffffff80002c268d): Kernel trap at 0xffffff7f81f14d71, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00007f9eb282a000, CR3: 0x000000000b523000, CR4: 0x0000000000000660
RAX: 0x00000000000018ae, RBX: 0xd5547c0b9be55e78, RCX: 0x00000000000018ae, RDX: 0xffffff80039f4370
RSP: 0xffffff80793c3788, RBP: 0x933264296aa50917, RSI: 0xffffff800c396100, RDI: 0xffffff80039f4360
R8: 0x0000000000000000, R9: 0x0000000000000040, R10: 0xffffff800c396138, R11: 0xffffff8000639d54
R12: 0x0000000000000000, R13: 0xffffff800c7b4b84, R14: 0x8121091fbccfc79d, R15: 0x980d0205c2481218
RFL: 0x0000000000010282, RIP: 0xffffff7f81f14d71, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00007f9eb282a000, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80793c3440 : 0xffffff8000220702
0xffffff80793c34c0 : 0xffffff80002c268d
0xffffff80793c3660 : 0xffffff80002d7a3d
0xffffff80793c3680 : 0xffffff7f81f14d71
Unaligned frame
Backtrace terminated-invalid frame pointer 0x933264296aa50917
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[9A6699AD-486F-3A F7-89BB-3F3398BAEF3B]@0xffffff7f81f12000->0xffffff7f81f16fff
BSD process name corresponding to current thread: coreservicesd
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: MacBook7,1 (Mac-F22C89C8)
System uptime in nanoseconds: 26063218772
last loaded kext at 25167071595: com.apple.driver.AppleTyMCEDriver 1.0.2d2 (addr 0xffffff7f81b4b000, size 45056)
loaded kexts:
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.12.40
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AppleHDA 2.1.1f12
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.1.1f12
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.GeForce 7.0.4
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleMuxControl 3.0.8
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.driver.AppleUSBTCKeyEventDriver 220.8
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.nvenet 2.0.17
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleHPET 1.6
com.apple.driver.AirPort.Brcm4331 511.20.10
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleUSBOHCI 4.4.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.kext.triggers 1.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.1.1f12
com.apple.driver.DspFuncLib 2.1.1f12
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.nvidia.nv50hal 7.0.4
com.apple.NVDAResman 7.0.4
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3
com.apple.driver.AppleHDAController 2.1.1f12
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.iokit.IOHDAFamily 2.1.1f12
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IONetworkingFamily 2.0
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4 -
Kernel panic since i bought my powerbook G4 (end 2005)
Hello,
I am desperate : i have had kernel panics since i bought my powerbook G4. I describe the kernel panic as a grey square that appears in the middle of the screen telling me to force my mac to quit in many languages. I have tried the apple care online call, then i have erased everything from my powerbook and reinstalled the system as applecare advised me to do. It continued. Then i went to ITechnique in Montreal to get some experts to analyse it, they didnt see nothing. Then i started to have these strange blackout screens, and these noises that was telling me that my mac is trying to reboot with no sucess. Everytime these black screens happens i have to force my mac to quit and it happens more and more. Then i gave it back to ITechnique, still they didnt see nothing. Then i want to Carrefour Laval, they took my powerbook for 1 week time to check it ; they didnt see nothing. So i proposed them to photograph and to film all my problems, after they had changed my macs memory. One week later i had 6 photos of kernel panics that i took in 2 weeks time + 4 to 5 black out screens filmed. I went back to Carrefour Laval to the genius bar and now they believed that there are problems on my mac and they want to replace hardware and many other things on my machine?!!!! What are the solutions? My applecare finishes july 2008, i am a graphic designer, i cant sell this useless machine like this, but i need to buy a new one. Do you think applecare could replace my machine? Are they other persons who has had the same problems with a Powerbook G4 bought in october 2005? Are they persons who has had their computer replaced by the applecare? Thank you very much!designerj:
Welcome to Apple Discussions.
You should not be having the issues you are having, and, in any case, if you have Apple Care the issue should have been resolved. I believe that you have done all that you could be reasonably expected to do.
I suggest that you call Apple Customer Relations and tell them exactly what your have detailed here. Offer to send documentation of your issue. And tell them that since your issue continues and you need your computer for your work, that you would like to have them resolve the issue by their replacing the computer with a new one. Be very polite. If you run into an agent who is unresponsive or rude (and I have heard reports of such), thank them politely, hang up, and call back later and hope to get someone else. If all esle fails, send a letter to Apple detailing both your technical issues as well as the difficulties you have experienced getting help.
Good luck.
cornelius -
Unruly modem driver causing kernel panics
My Mini has experienced two kernel panics since my last reformat during the New Year. I took a look at the log and this is the only part that I understood.
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.3)@0x847000
dependency: com.apple.iokit.IOSerialFamily(9.0.0d30)@0x4b4000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x639000
It's the same for both kernel panics I had experienced. I've reported both to apple, hopefully they fix the driver. I was wonder if anybody else has got this type of panic and what can be done to reduce it's likelihood of occurence.Ok, here you go.
Thu Jan 19 21:39:41 2006
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x0000000009545FFF PC=0x0000000000879284
Latest crash info for cpu 0:
Exception state (sv=0x2111D780)
PC=0x00879284; MSR=0x00009030; DAR=0x09545FFF; DSISR=0x42000000; LR=0x0087932C; R1=0x0CF43D20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008792AC 0x0088D7D0 0x0088AA34 0x008A0C14 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.3)@0x847000
dependency: com.apple.iokit.IOSerialFamily(9.0.0d30)@0x4b4000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x639000
Proceeding back via exception chain:
Exception state (sv=0x2111D780)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2371C780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x2111D780)
PC=0x00879284; MSR=0x00009030; DAR=0x09545FFF; DSISR=0x42000000; LR=0x0087932C; R1=0x0CF43D20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x008792AC 0x0088D7D0 0x0088AA34 0x008A0C14 0x000A9894
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.MotorolaSM56K(1.3.3)@0x847000
dependency: com.apple.iokit.IOSerialFamily(9.0.0d30)@0x4b4000
dependency: com.apple.driver.AppleI2SModemFamily(1.1.2)@0x639000
Exception state (sv=0x2371C780)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
From what I could see both are seemed to look exactly the same.
Maybe you are looking for
-
I am always prompted when opening a pdf file
I have tried all the fixes listed on the help site and I always get prompted as to how to open a pdf file. I have Acrobat Pro 6.0 and Acrobat Reader 10. I uninstalled and reinstalled reader 10. I can set the application tab for pdf files to Use Adobe
-
IPhone 5 and Verizon customer Service Nightmare Please help!
I need help with Verizon customer service. I would like to know if I am being unreasonable. Here is my story. I ordered an iPhone 5 from apple to add to my Verizon account. This will be my fourth line of service with Verizon. I spend over 200 dollars
-
[SOLVED] [vim] get current mode
Hi I'm trying to configure my vim statusbar, and depending on the current mode I want to change parts of the line: Normal: Insert mode: Now I would also like to configure visual, replace, etc., and I have tried mode() that should (according to the vi
-
ABAP Documentation Generation, Javadoc-like
Hello everyone, I've got one topic to discuss that I do not find very much information about on SCN. It's about documentation. and I don't mean SAP documentation like help.sap.com, but the documentation about the software we (=developers) are produci
-
Font and font size in loupe view
Is there any way to change the font size in the loupe view? I find it excessively large. -paul