External Library

Hi:
I followed the instructions of Rajit Srinivas to use external jar files.
Re: Cannot build web component
I am confused about how to do
  2)In project properties, create a Library reference for this J2EE DC (please see above messages).
I tried to build and I got the following warning. I think I am missing the above step.
WARNING: application-j2ee-engine.xml: No reference entry for runtime dependency on DC sap.com~crm/insight/poi_library
see below for the entire logfile.
Thanks in Advance!
Development Component Build (2006-06-29 16:23:51)
  Component name: crm/insight/te
  Component vendor: sap.com
  SC compartment: insight.com_APPL_1
  Configuration: JDD_DEMO_D
  Location: JDD_DEMO_D
  Source code location: http://jdiaz01:50000/dtr/ws/DEMO/insight.com_APPL/dev/inactive/DCs/sap.com/crm/insight/te/_comp/
  DC root folder: C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\
  DC type: Web Dynpro
  Host: PHXAD0601
DC Model check:
          [dcmake] All used DCs are available locally
          [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/cmi"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/ddicruntime"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/metamodel/content"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wd/webdynpro"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/logging"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wdp/metamodel/content"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.util.misc"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.exception"
          [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.mw.jco"
          [dcmake] validating dependency to  public part "compiletime" of DC "sap.com/crm/insight/poi_lib"
          [dcmake] validating dependency to  public part "defLib" of DC "sap.com/crm/insight/poi_library"
          [dcmake] DC model check OK
Start build plugin:
          [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
          [dcmake] starting build plugin from : C:\Dev Comps\0\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
Build Plugin 'WebDynproPlugin', Version 6.40 SP 16 (630_REL, built on 2006-04-06 00:59:52 CEST)
   development component:  crm/insight/te (sap.com)
      software component:  APPL (insight.com)
                location:  JDD_DEMO_D
                    type:  Web Dynpro
           build variant:  default
         source location:  http://jdiaz01:50000/dtr/ws/DEMO/insight.com_APPL/dev/inactive/
       plugin start time:  2006-06-29 16:23:51 GMT-07:00
                 Java VM:  Java HotSpot(TM) Client VM, 1.4.2_10-b02 (Sun Microsystems Inc.)
General options:
  convert *.xlf to *.properties: yes
  include sources for debugging: yes
Plugin initialized in 0.172 seconds
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.047 seconds
Executing macro file..
  Using macro file:     C:\Dev Comps\0\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\macros\build.vm
  Creating output file: C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\gen\default\logs\build.xml
Macro file executed in 0.563 seconds
Starting Ant..
  Using build file:     C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\gen\default\logs\build.xml
  Using build target:   build
  Generation folder:    C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315
  Using Ant version:    1.5.4
prepare:
     [mkdir] Created dir: C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\gen\default\deploy
compile:
     [ddgen]
     [ddgen] [Info]    Property deployment is true: Deployment information is provided!
     [ddgen] [Info]    Property sourcepath: C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\src\packages
     [ddgen] [Info]    Property targetpath: C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\gdd
     [ddgen] [Info]    Property archivename: sap.comcrminsight~te
     [ddgen] [Info]    Property vendor: sap.com
     [ddgen] [Info]    Property dcname: crm/insight/te
     [ddgen] [Info]    Property language: Available languages are automatically determined!
     [ddgen] [Info]    Property addpaths ...
     [ddgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
     [ddgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
     [ddgen] [Info]       exception.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       aii_proxy_rt.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproadmin.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynprobasesrvc.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproclientserver.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynpromodelimpl.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynpromodel_dynamicrfc.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynpropdfobject.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproprogmodel.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproruntime_designtime_coupling.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproruntime_designtime_coupling_api.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproruntime_repository.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproruntime_repository_pmr.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       webdynproservices.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       poi-2.5.1-final-20040804.jar - C:/Dev Comps/0/DCs/sap.com/crm/insight/poi_lib/_comp/gen/default/public/compiletime/lib/java
     [ddgen] [Info]       poi-contrib-2.5.1-final-20040804.jar - C:/Dev Comps/0/DCs/sap.com/crm/insight/poi_lib/_comp/gen/default/public/compiletime/lib/java
     [ddgen] [Info]       poi-scratchpad-2.5.1-final-20040804.jar - C:/Dev Comps/0/DCs/sap.com/crm/insight/poi_lib/_comp/gen/default/public/compiletime/lib/java
     [ddgen] [Info]       cmiapi.jar - C:/Dev Comps/0/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       jrfc.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       logging.jar - C:/Dev Comps/0/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       logging.perf.jar - C:/Dev Comps/0/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapDictionaryTypeServices.jar - C:/Dev Comps/0/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapDictionaryTypesRuntime.jar - C:/Dev Comps/0/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]       aii_util_misc.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
     [ddgen] [Info]    Initialize generation templates from configuration jar:file:/C:/Dev Comps/0/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
     [ddgen] [Info]    Generating dbtables/sdmDeployDd.xml
     [ddgen] [Info]    Generation finished (1 seconds)
     [ddgen]
     [timer] Data dictionary generator  finished in 1.625 seconds
     [wdgen]
     [wdgen] [Info]    Property deployment is true: Deployment information is provided!
     [wdgen] [Info]    Property sourcepath: C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\src\packages
     [wdgen] [Info]    Property targetpath: C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\gwd
     [wdgen] [Info]    Property archivename: sap.comcrminsight~te
     [wdgen] [Info]    Property vendor: sap.com
     [wdgen] [Info]    Property dcname: crm/insight/te
     [wdgen] [Info]    Property projectlanguage: en
     [wdgen] [Info]    Property language: Available languages are automatically determined!
     [wdgen] [Info]    Property addpaths ...
     [wdgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
     [wdgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
     [wdgen] [Info]       exception.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       aii_proxy_rt.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproadmin.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynprobasesrvc.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproclientserver.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynpromodelimpl.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynpromodel_dynamicrfc.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynpropdfobject.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproprogmodel.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproruntime_designtime_coupling.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproruntime_designtime_coupling_api.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproruntime_repository.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproruntime_repository_pmr.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       webdynproservices.jar - C:/Dev Comps/0/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapMetamodelDictionaryContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       poi-2.5.1-final-20040804.jar - C:/Dev Comps/0/DCs/sap.com/crm/insight/poi_lib/_comp/gen/default/public/compiletime/lib/java
     [wdgen] [Info]       poi-contrib-2.5.1-final-20040804.jar - C:/Dev Comps/0/DCs/sap.com/crm/insight/poi_lib/_comp/gen/default/public/compiletime/lib/java
     [wdgen] [Info]       poi-scratchpad-2.5.1-final-20040804.jar - C:/Dev Comps/0/DCs/sap.com/crm/insight/poi_lib/_comp/gen/default/public/compiletime/lib/java
     [wdgen] [Info]       cmiapi.jar - C:/Dev Comps/0/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       jrfc.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       logging.jar - C:/Dev Comps/0/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       logging.perf.jar - C:/Dev Comps/0/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapDictionaryTypeServices.jar - C:/Dev Comps/0/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapDictionaryTypesRuntime.jar - C:/Dev Comps/0/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       SapMetamodelWebdynproContent.zip - C:/Dev Comps/0/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]       aii_util_misc.jar - C:/Dev Comps/0/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
     [wdgen] [Info]    Initialize generation templates from configuration jar:file:/C:/Dev Comps/0/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml
     [wdgen] [Warning] com.insight.crm_sm.timeentry.TimeEntryView --> UIElement Excel_FileUpload: UIElement does not have a label
     [wdgen] [Info]    com.insight.crm_sm.timeentry.TimeEntryView --> TextView Save_Summary_TextView: UIElement does not have a label
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateOrderNumberListView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/OrderNumberListView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalOrderNumberListView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPublicTimeEntryComp.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateTimeEntryComp.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryComp.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalTimeEntryComp.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivatePersonNumberListView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/PersonNumberListView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalPersonNumberListView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateTimeEntryView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalTimeEntryView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPublicPersonNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivatePersonNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/PersonNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalPersonNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPublicTimeEntryInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateTimeEntryInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalTimeEntryInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPublicTimeEntryCompInterface.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IExternalTimeEntryCompInterface.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateTimeEntryCompInterface.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryCompInterface.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalTimeEntryCompInterface.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryCompInterface.wdcontroller
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPublicTimeEntryCompInterfaceCfg.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IExternalTimeEntryCompInterfaceCfg.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateTimeEntryCompInterfaceCfg.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryCompInterfaceCfg.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalTimeEntryCompInterfaceCfg.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/TimeEntryCompInterfaceCfg.wdcontroller
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPublicOrderNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IPrivateOrderNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/OrderNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/InternalOrderNumberListInterfaceView.java
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/IMessageTimeEntryComp.java
     [wdgen] [Info]    Generating configuration/Components/com.insight.crm_sm.timeentry.TimeEntryComp/TimeEntryComp.xml
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/ResourceTimeEntryComp.properties
     [wdgen] [Info]    Generating packages/com/insight/crm_sm/timeentry/wdp/ResourceTimeEntryComp_en.properties
     [wdgen] [Info]    Generating configuration/Applications/com.insight.crm_sm.timeentry.TimeEntryApp/TimeEntryApp.xml
     [wdgen] [Info]    Generating portalapp.xml
     [wdgen] [Info]    Generating wd.xml
     [wdgen] [Info]    Generating application.xml
     [wdgen] [Info]    Generating application-j2ee-engine.xml
     [wdgen] [Info]    Generating PublicPartFileList.properties
     [wdgen] [Info]    Generating PublicPartFileList.xml
     [wdgen] [Info]    Generation finished (3 seconds)
     [wdgen]
     [timer] WebDynpro generator  finished in 3.484 seconds
      [echo] Starting Java compiler
     [javac] Compiling 37 source files to C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\classes
     [timer] Java compilation finished in 3.282 seconds
      [echo] Start XLF conversion
  [xlf2prop] Found 6 XLF files to convert in src\packages
  [xlf2prop] Found 0 XLF files to convert in C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\gwd\packages
  [xlf2prop] Found 0 XLF files to convert in C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\gdd\datatypes
     [timer] XLF conversion finished in 0.172 seconds
[wdminimize] Start minimizer for project classpath:
[wdminimize]   C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\classes
[wdminimize] external classpath:
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\com.sap.exception\_comp\gen\default\public\default\lib\java\exception.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\com.sap.aii.proxy.framework\_comp\gen\default\public\default\lib\java\aii_proxy_rt.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_admin.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_basesrvc.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_clientserver.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_modelimpl.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_model_dynamicrfc.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_pdfobject.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_progmodel.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_designtime_coupling.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_designtime_coupling_api.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_repository.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_runtime_repository_pmr.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\wd\webdynpro\_comp\gen\default\public\default\lib\java\_webdynpro_services.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\crm\insight\poi_lib\_comp\gen\default\public\compiletime\lib\java\poi-2.5.1-final-20040804.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\crm\insight\poi_lib\_comp\gen\default\public\compiletime\lib\java\poi-contrib-2.5.1-final-20040804.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\crm\insight\poi_lib\_comp\gen\default\public\compiletime\lib\java\poi-scratchpad-2.5.1-final-20040804.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\cmi\_comp\gen\default\public\default\lib\java\_cmi_api.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\com.sap.mw.jco\_comp\gen\default\public\default\lib\java\jrfc.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\logging\_comp\gen\default\public\default\lib\java\logging.perf.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\ddic\ddicruntime\_comp\gen\default\public\default\lib\java\SapDictionaryTypeServices.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\tc\ddic\ddicruntime\_comp\gen\default\public\default\lib\java\SapDictionaryTypesRuntime.jar
[wdminimize]   C:\Dev Comps\0\DCs\sap.com\com.sap.aii.util.misc\_comp\gen\default\public\default\lib\java\aii_util_misc.jar
[wdminimize] Analyzing 91 classes from URLClassFileLoader@12eb371[C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\classes]
[wdminimize]   Classes loaded in 359 ms.
[wdminimize]   Completed pass 0 in 0 ms (using a priori knowledge).
[wdminimize]   Completed pass 1 in 4235 ms (using a priori knowledge).
[wdminimize]   Completed pass 2 in 0 ms (propagating to specialized classes).
[wdminimize] Finished Analysis (4594 ms)
[wdminimize]
[wdminimize] Shrinking class files
[wdminimize]   checked 440 Fields,
[wdminimize]     active:  356
[wdminimize]     removed: 84
[wdminimize]     zombie:  0
[wdminimize]   checked 799 Methods,
[wdminimize]     active:  474
[wdminimize]     removed: 325
[wdminimize]     zombie:  0
[wdminimize] Modified 53 classes (281 ms)
[wdminimize]
[wdminimize] Reduced total class file size by 16% (4922 ms)
     [timer] WebDynpro class minimizer finished in 4.938 seconds
createWDA:
     [mkdir] Created dir: C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\wda-pp
  [pppacker] Ignoring unknown source folder META-INF for WebDynpro archive.
  [pppacker] Packed  78 files for entity WebDynpro Archive (WebDynpro Archive/Archive)
     [timer] WebDynpro Archive packaging finished in 1.047 seconds
createDeployArchive:
       [cda] Adding module 'sap.comcrminsight~te.wda' from current development component
       [cda] Validating C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\gwd\application.xml
       [cda] Validating C:\Dev Comps\0\t\5DB24ECB8D50CE4818037AD64D156315\gwd\application-j2ee-engine.xml
       [cda] WARNING: application-j2ee-engine.xml: No reference entry for runtime dependency on DC sap.com~crm/insight/poi_library
packDeployArchive:
[srcpacker] Creating source archive
[srcpacker] Adding source archive from sap.com~crm/insight/te
     [timer] Source archive creation finished in 0.313 seconds
    [jarsap] Info: JarSAP version 20041217.1600
    [jarsap] Info: JarSAPProcessing version 20060104.1634 / JarSL version 20060106.1831
    [jarsap] Property jarsap.info.dir is not set.
    [jarsap] Building: C:\Dev Comps\0\DCs\sap.com\crm\insight\te\_comp\gen\default\deploy\sap.comcrminsight~te.ear with compression
     [timer] JarSAP finished in 0.359 seconds
createPublicParts:
build:
Ant runtime 15.643 seconds
Ant build finished with WARNINGS
Build plugin finished at 2006-06-29 16:24:08 GMT-07:00
Total build plugin runtime: 16.487 seconds
Build finished with WARNING

Hi All:
As I Mentioned in the above reply,
when I try to build the J2EE Library DC I get the following errors.
Warning: Runtime dependency to lib3 (sap.com) not allowed (incompatible runtime type).
Warning: Failed to read PublicPartFileList.xml from C:\Dev Comps\0\DCs\sap.com\lib3\_comp\gen\default\public\runtime (Failed to load file C:\Dev Comps\0\DCs\sap.com\lib3\_comp\gen\default\public\runtime)
see below for the entir log
Thanks in Advance for your help!
Jul 5, 2006 9:10:36 AM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] WARNING: lib1j2: built with warnings sap.com/lib1j2(insight.com_APPL_1) in variant "default" (2.076 sec) :
Build log -
Development Component Build (2006-07-05 09:10:34)
  Component name: lib1j2
  Component vendor: sap.com
  SC compartment: insight.com_APPL_1
  Configuration: JDD_DEMO_D
  Location: JDD_DEMO_D
  Source code location: http://jdiaz01:50000/dtr/ws/DEMO/insight.com_APPL/dev/inactive/DCs/sap.com/lib1j2/_comp/
  DC root folder: C:\Dev Comps\0\DCs\sap.com\lib1j2\_comp\
  DC type: J2EE Server Component
  DC subtype: Library
  Host: PHXAD0601
DC Model check:
          [dcmake] All used DCs are available locally
          [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/addLib"
          [dcmake] validating dependency to  public part "runtime" of DC "sap.com/lib3"
          [dcmake] DC model check OK
Start build plugin:
          [dcmake] using build plugin: sap.com/tc/bi/bp/addLib
          [dcmake] starting build plugin from : C:\Dev Comps\0\DCs\sap.com\tc\bi\bp\addLib\_comp\gen\default\public\addLib\
Build Plugin 'J2EE Library', Version 6.40 SP 16 (630_REL, built on 2006-04-06 00:59:52 CEST)
   development component:  lib1j2 (sap.com)
      software component:  APPL (insight.com)
                location:  JDD_DEMO_D
                    type:  J2EE Server Component, subtype Library
           build variant:  default
         source location:  http://jdiaz01:50000/dtr/ws/DEMO/insight.com_APPL/dev/inactive/
       plugin start time:  2006-07-05 09:10:34 GMT-07:00
                 Java VM:  Java HotSpot(TM) Client VM, 1.4.2_10-b02 (Sun Microsystems Inc.)
General options:
  convert *.xlf to *.properties: yes
  include sources for debugging: yes
Warning: Warning: Source folder does not exist, will be ignored: server
Plugin initialized in 0.082 seconds
Warning: Runtime dependency to lib3 (sap.com) not allowed (incompatible runtime type).
Warning: Failed to read PublicPartFileList.xml from C:\Dev Comps\0\DCs\sap.com\lib3\_comp\gen\default\public\runtime (Failed to load file C:\Dev Comps\0\DCs\sap.com\lib3\_comp\gen\default\public\runtime)
Preparing data context..
No 'default' JDK defined, will use running VM.
Data context prepared in 0.016 seconds
Executing macro file..
  Using macro file:     C:\Dev Comps\0\DCs\sap.com\tc\bi\bp\addLib\_comp\gen\default\public\addLib\macros\build.vm
  Creating output file: C:\Dev Comps\0\DCs\sap.com\lib1j2\_comp\gen\default\logs\build.xml
Macro file executed in 0.409 seconds
Starting Ant..
  Using build file:     C:\Dev Comps\0\DCs\sap.com\lib1j2\_comp\gen\default\logs\build.xml
  Using build target:   build
  Generation folder:    C:\Dev Comps\0\t\ADCBF0AEA7482CDCA07BB2A62A8666A6
  Using Ant version:    1.5.4
prepare:
     [mkdir] Created dir: C:\Dev Comps\0\DCs\sap.com\lib1j2\_comp\gen\default\deploy
     [mkdir] Created dir: C:\Dev Comps\0\t\ADCBF0AEA7482CDCA07BB2A62A8666A6\int-pp
     [mkdir] Created dir: C:\Dev Comps\0\t\ADCBF0AEA7482CDCA07BB2A62A8666A6\sda
compile:
createPublicParts:
createDeployArchive:
     [mkdir] Created dir: C:\Dev Comps\0\t\ADCBF0AEA7482CDCA07BB2A62A8666A6\sdaprep
       [cda] Failed to read PublicPartFileList from C:\Dev Comps\0\DCs\sap.com\lib3\_comp\gen\default\public\runtime, switching to legacy mode.
       [cda] Adding module 'poi-2.5.1-final-20040804.jar' from DC 'null' (vendor 'null'), public part 'null'
       [cda] Adding module 'poi-contrib-2.5.1-final-20040804.jar' from DC 'null' (vendor 'null'), public part 'null'
       [cda] Adding module 'poi-scratchpad-2.5.1-final-20040804.jar' from DC 'null' (vendor 'null'), public part 'null'
       [cda] Creating descriptor server/provider.xml ...
       [cda] WARNING: Ignoring invalid runtime dependency on lib3 (sap.com), type Java/
packDeployArchive:
[srcpacker] Creating source archive
[srcpacker] Failed to read PublicPartFileList from C:\Dev Comps\0\DCs\sap.com\lib3\_comp\gen\default\public\runtime, switching to legacy mode.
[srcpacker] No sources available for packing, no archive will be created.
     [timer] Source archive creation finished in 0.049 seconds
    [jarsap] Info: JarSAP version 20041217.1600
    [jarsap] Info: JarSAPProcessing version 20060104.1634 / JarSL version 20060106.1831
    [jarsap] Property jarsap.info.dir is not set.
    [jarsap] Building: C:\Dev Comps\0\DCs\sap.com\lib1j2\_comp\gen\default\deploy\sap.com~lib1j2.sda with compression
     [timer] JarSAP finished in 1.046 seconds
build:
Ant runtime 1.357 seconds
Ant build finished with WARNINGS
Build plugin finished at 2006-07-05 09:10:36 GMT-07:00
Total build plugin runtime: 1.945 seconds
Build finished with WARNING

Similar Messages

  • My external library 100 GB on a 2TB drive is taking a long time to open.

    Hey there,
    I recently moved my library to an external drive.  When I tried to load the external drive, it said it needed to repair and I let it happen overnight because it was taking a long time.
    Now it seems to just freeze when I try to load the external library.  Can someone let me know if there is something I can do to make this process speed up?  Should I move some of my projects to another library and keep it off-line?
    Thanks,
    Austin

    Could it possibly be due to videos stored in the aperture library?  I think one of the folders has multiple GB of video...  Just a thought.
    If Aperture is freezing on opening, this can be caused by corrupted or incompatible media, but it would not explain the original error message your reported - "permissions".
    When the repair finishes, try to launch Aperture with the Shift-key held down. This will defer the generation of previews. If media cannot beprocessed, Aperture will hang, when it tries to generate the previews for those images or videos. If you can get Aperture to launch after deferring the preview generation, you could open the Activity window (Window > Show Activity) and then selectively try to generate previews for your last imported images and videos  (Photos > update preview). The Activity window will show, what is currently processed, and perhaps you can spot, which of the files is causing the hang.

  • How to reference an External Library (Server Side) in a DC-EJB Module ?

    Hi:
    I start working with hibernate in a DC component, so I create my DC project and EJB module inside. I Make an external library following this
    Thanks a lot for your time on this thread.
    Rocío.

    Hi Rocío!
      Umm, I don't usually use DC's... I don't know if this will work... you can make an EAR (New Proyect -> J2EE -> Enterpise Application Module), add your EJB Module to the EAR (right click on EJB Project and choose Add to EAR proyect), and you'll find a j2ee-engine file on it, and you can add the reference there.Then deploy the EAR.
      I normally do something similar to your issue, I make a EJB calling XI via Java Proxys, and the reference to the XI libs are allocated on the EAR, not on the EJB. This is only for runtime, for compilation you must reference the hibernate jar with an external jar file, as always.
      A dirty solution could be this one: open your generated EAR with de-compressor, and copy your hibernate jar on it (at root). This way you'll load hibernate classes at runtime (I know this is an horrible solution, this is only for testing).
      As I said before, I'm not used to DCs, so this could be wrong, and be a waste of time... I don't know further...
      Good luck
      Eneko.

  • How to use a jar from a external library DC Project?

    I followed the steps of how to create DC, External Library Project, which contains the jar I want.
    I understood that this type of project can't be deployed so I build and deployed other DC Project from the type J2EE server component Library and added it to it's public part. What do I do next, to actually use the jar and it's imports?
    Thank you,
    Meytal.

    Hi,
    Check this:
    Making a JAR file publicly available
    http://help.sap.com/saphelp_nw70/helpdata/en/9f/2ade3fc6c6ec06e10000000a1550b0/frameset.htm
    Greetings,
    Praveen Gudapati
    [Points are welcome for helpful answers]

  • I have just upgraded my laptop from vista to windows 7, I have all my music on an external as the library is to large for hard disk. I have downloaded Itunes 11 but cannot  fathom a way of getting my new itunes to connect with my external library.

    Question:  I have upgraded my windows vista to windows 7, I have all of my itunes music stored onto an external due to the size of content, so in vista all of my music in itunes had a path to F (external library). But now I have upgrade to windows 7, I cannot get itunes to recognise my library from my external. I have tried to connect external and open itunes with shift key down with both suggestions but to no avail. please help, all I want is to keep my library on external not on hard drive. I have also gone to preferences/advanced and made sure the external drive is chosen. This seems so complicated and I thought it would have been easy...

    At a guess you followed the process in HT1364 - iTunes for Windows: Moving your iTunes Media folder which would have moved the media folder to a new path of your choice. This process leaves the library database files back in the original location of <User's Music>\iTunes. Often people assume that all they need is now on the external drive and wipe the internal drive, or discard their old computer, before backing up the all important iTunes folder. If you have a backup of your user's profile folder from before the upgrade the iTunes library folder should be in there somewhere. Restore it to <User's Music> and your original library should pop back into existence. The external drive would need to have the same drive letter that it had previously.
    A more effective way to relocate the library is to move the entire iTunes folder to the external drive, then hold down shift when starting iTunes and keep holding until asked to choose or create a library. You would then choose the file iTunes Library.itl in the iTunes folder on the external drive. If this is the way you moved the library before then that is how you should now reconnect to it. Changing the media folder in preferences doesn't change which .itl database file is opened, nor does double-clicking on an .itl file directly.
    If you no longer have the original .itl file then you will have to build a new library and import the media to it. If you need to do this I would recommend you create a new library at F:\iTunes, then move your existing media folders inside F:\iTunes\iTunes Media before importing. This will avoid the creation of duplicates and make sure the library is in the correct shape going forwards.
    If you have an iPod or iOS device my scripts ImportDevicePlaylists and SyncStats may well let you recover ratings, play counts & playlists from the device.
    When you've fixed up your libray you should consider getting a second external drive to backup to.
    tt2

  • Adding Libraries & External Library DC - Not able to import JAR Files

    Hi,
    I am trying to import the jar files to development environment.
    The JAR file was added by following the steps mentioned in below blog :
    /people/bala.krishnan2/blog/2006/09/25/bid-adieu-to-bots--using-captchas
    Please find the error log below :
    20100728065650 Info   :connected to deploytool via sdm protocol
    20100728065651 Info   :deploy every archive associated to the buildspace: DP1_MSSTRK19_D
    20100728065651 Info   :getting DC mss/eepro/salarydata from CBS for buildspace: DP1_MSSTRK19_D
    20100728065651 Info   :Following SDAs were added:
    20100728065651 Info   :  201007280456510519_sap.com_SAP_MSS_1_sap.com_msseeprosalarydata.sda
    20100728065651 Info   :archives (201007280456510519_sap.com_SAP_MSS_1_sap.com_msseeprosalarydata.sda) for DC mss/eepro/salarydata were selected
    20100728065652 Info   :Start deployment:
    20100728065652 Info   :The following archives will be deployed (on http://sapdp1ci.zrh.swissre.com:53018)
    20100728065652 Info   :/usr/sap/DP1/SYS/global/TCS/DEPLOYARCHIVES/201007280456510519_sap.com_SAP_MSS_1_sap.com_msseeprosalarydata.sda
    20100728065652 Info   :starting deployment
    20100728065652 Info   :errorhandling rule is switched from OnErrorStop to OnErrorSkipDepending
    20100728065652 Info   :prerequisite errorhandling rule is switched from OnPrerequisiteErrorStop to OnPrerequisiteErrorSkipDepending
    20100728065654 Info   :deployment finished
    20100728065654 Info   :errorhandling rule is reseted
    20100728065654 Info   :prerequisite errorhandling rule is reseted
    20100728065654 Info   :Deploy log:
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: Start file transfer to /usr/sap/DP1/JC30/SDM/program/temp/201007280456510519_sap.com_SAP_MSS_1_sap.com_msseeprosalarydata.sda
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: File transfer of /usr/sap/DP1/JC30/SDM/program/temp/201007280456510519_sap.com_SAP_MSS_1_sap.com_msseeprosalarydata.sda finished for 9 ms. Total file size is 1347307 bytes.
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: The SDM client uses an old SDM client API.
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: -
    Starting deployment -
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: Error handling strategy: OnErrorSkipDepending
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: Prerequisite error handling strategy: OnPrerequisiteErrorSkipDepending
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: Update strategy: UpdateAllVersions
    20100728065654 Info   :Jul 28, 2010 6:56:52 AM  Info: Starting deployment prerequisites:
    20100728065654 Info   :Jul 28, 2010 6:56:53 AM  Info: Loading selected archives...
    20100728065654 Info   :Jul 28, 2010 6:56:53 AM  Info: Loading archive '/usr/sap/DP1/JC30/SDM/program/temp/201007280456510519_sap.com_SAP_MSS_1_sap.com_msseeprosalarydata.sda'
    20100728065654 Info   :Jul 28, 2010 6:56:54 AM  Info: Selected archives successfully loaded.
    20100728065654 Info   :Jul 28, 2010 6:56:54 AM  Error: Unresolved dependencies found for the following SDAs:
    20100728065654 Info   :
    20100728065654 Info   :1.: development component 'mss/eepro/salarydata'/'sap.com'/'DP1_MSSTRK19_D'/'31236'/'0'
    20100728065654 Info   :dependency:
    20100728065654 Info   :       name:     'temp/jxljar1'
    20100728065654 Info   :     vendor:     'swissre.com'
    20100728065654 Info   :
    20100728065654 Info   :There is no component either in SDM repository or in Deployment batch that resolves the dependency.
    20100728065654 Info   :
    20100728065654 Info   :Deployment will be aborted.
    20100728065654 Info   :Jul 28, 2010 6:56:54 AM  Error: No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
    20100728065654 Info   :Deployment will be aborted.
    20100728065654 Info   :Jul 28, 2010 6:56:54 AM  Error: Prerequisites were aborted.
    20100728065654 Info   :Jul 28, 2010 6:56:54 AM  Error: Error while creating deployment actions. No Software Component Archive (SCA) or Software Delivery Archive (SDA) selected. Select at least one.
    20100728065654 Info   :Deployment will be aborted.
    20100728065654 Info   :end of log
    20100728065654 Info   :End deployment:
    20100728065654 Info   :
    20100728065654 Info   :Summary of deployment
    20100728065654 Info   :==> deployment finished for mss/eepro/salarydata (28979) with rc=12
    20100728065654 Info   :deployment finished for buildspace: DP1_MSSTRK19_D
    Please let me know how to fix this issue.
    Thanks in advance.
    Thanks and Regards,
    Rashmi

    Rashmi,
    Following observations from the error log:
    a)  DC temp/jxljar1 is External Library DC; if I am not wrong.
    b) Once the J2EE DC is deployed; automatically jxljar1 should also be loaded in server
    Coming to the issue you are facing; plz let us know following points:
    a) Are you trying to transport the content from one landscape to the other i.e. development to QA?
    b) During what operation and in which unit(DTR/CMS/CBS);you are facing the issue?
    Regards,
    Ganga

  • Using External Library in a DC problem (SP16)

    Hi,
    I've been trying to get the example that Valery is outlining in his <a href="/people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro">Blog</a>.
    I've done it exactly as Valery says, but I can't get it to work. I create the External Library DC, add the jar to Public Part (purpose Assembly) and build. Builds ok.
    I then proceed to creating the J2EE Library. It is created ok. I then add the External Lib I just created to Used DCs. This goes ok. I build the DC. There are warnings:
    Warning: Warning: Source folder does not exist, will be ignored: server
    Plugin initialized in 0.03 seconds
    Warning: No runtime information available for development component type External Library (sap.com), cannot validate runtime dependency.
    And:
    createDeployArchive:
         [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\sdaprep
           [cda] Creating descriptor server/provider.xml ...
           [cda] WARNING: Ignoring invalid runtime dependency on js/jars (orion.com), type External Library
    I've tried nearly every combination of Dependency Types When adding the used DC to J2EE DC. The jar never ends up in the SDA file in gen\default\deploy or jar in gen\default\public. I only get different types of warnings.
    Here is the whole build.log:
    Apr 7, 2006 8:48:00 AM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] WARNING: js/lib: built with warnings orion.com/js/lib(MyComponents) in variant "default" (0.753 sec) :
    Build log -
    Development Component Build (2006-04-07 08:48:00)
      Component name: js/lib
      Component vendor: orion.com
      SC compartment: MyComponents
      Configuration: LocalDevelopment
      Location: local
      Source code location: jarpak@UFIES-JARPAK
      DC root folder: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\
      DC type: J2EE Server Component
      DC subtype: Library
      Host: UFIES-JARPAK
    DC Model check:
              [dcmake] All used DCs are available locally
              [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/addLib"
              [dcmake] validating dependency to  public part "Tokenizer" of DC "orion.com/js/jars"
              [dcmake] DC model check OK
    Start build plugin:
              [dcmake] using build plugin: sap.com/tc/bi/bp/addLib
              [dcmake] starting build plugin from : C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\addLib\_comp\gen\default\public\addLib\
    Build Plugin 'J2EE Library', Version 6.40 SP 16 (630_VAL_REL, built on 2006-02-13 00:17:07 CET)
       development component:  js/lib (orion.com)
          software component:  MyComponents (demo.sap.com)
                    location:  local
                        type:  J2EE Server Component, subtype Library
               build variant:  default
             source location:  jarpak@UFIES-JARPAK
           plugin start time:  2006-04-07 08:48:00 GMT+02:00 (EEST)
                     Java VM:  Java HotSpot(TM) Client VM, 1.4.2_03-b02 (Sun Microsystems Inc.)
    General options:
      convert *.xlf to *.properties: yes
      include sources for debugging: yes
    Warning: Warning: Source folder does not exist, will be ignored: server
    Plugin initialized in 0.03 seconds
    Warning: No runtime information available for development component type External Library (sap.com), cannot validate runtime dependency.
    Preparing data context..
    No 'default' JDK defined, will use running VM.
    Data context prepared in 0 seconds
    Executing macro file..
      Using macro file:     C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\addLib\_comp\gen\default\public\addLib\macros\build.vm
      Creating output file: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\logs\build.xml
    Macro file executed in 0.482 seconds
    Starting Ant..
      Using build file:     C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\logs\build.xml
      Using build target:   build
      Generation folder:    C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426
      Using Ant version:    1.5.4
    prepare:
         [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\deploy
         [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\int-pp
         [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\sda
    compile:
    createPublicParts:
    createDeployArchive:
         [mkdir] Created dir: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\t\C2CEFADCC9470A9F87865E9894AAE426\sdaprep
           [cda] Creating descriptor server/provider.xml ...
           [cda] WARNING: Ignoring invalid runtime dependency on js/jars (orion.com), type External Library
    packDeployArchive:
    [srcpacker] Creating source archive
    [srcpacker] No sources available for packing, no archive will be created.
         [timer] Source archive creation finished in 0.02 seconds
        [jarsap] Info: JarSAP version 20041217.1600
        [jarsap] Info: JarSAPProcessing version 20060104.1634 / JarSL version 20060106.1831
        [jarsap] Property jarsap.info.dir is not set.
        [jarsap] Building: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\orion.com\js\lib\_comp\gen\default\deploy\orion.comjslib.sda with compression
         [timer] JarSAP finished in 0.03 seconds
    build:
    Ant runtime 0.161 seconds
    Ant build finished with WARNINGS
    Build plugin finished at 2006-04-07 08:48:00 GMT+02:00 (EEST)
    Total build plugin runtime: 0.693 seconds
    Build finished with WARNING
    What am I doing wrong ?
    Kind Regards,
    Jari Pakarinen

    Hi,
    There is an issue with SP16 in using External library DC.
    Go through this Jars not included in J2EE Library DC SDA. This thread deals with the same issue.
    Hope this helps.
    Regards,
    Rathna.

  • Using External Library in Web Dynpro - Error

    Hello,
    I want to use an external library in a web dynpro. I use WAS 6.40 SP12.
    1. I have created an dc web dynpro app
    2. I have created an dc external library app
    3. I have importet the jar to the external library
    4. I have published the jar as public part
    5. I have imported the public part to web dynpro
    If I build the project I get no error. If I deploy an run the project then I get an error stacktrace:
    java.lang.NoClassDefFoundError: com/sap/netweaver/bc/rf/util/uuid/UUID
    NoClassDefFoundError - I think the jar-file was not deployed. What is wrong?
    Greetings
    Thomas

    Hi THomas,
    Please explain how you are adding the jars into the publicpart of the Libary DC.
    You need to create 2 public parts .
    1. Assembly
    2. Compilation
    You need to add your jar to above two public parts.
    Then you need to add above two publicparts to your webdynpro application.
    Regards, Anilkumar

  • NWDS SPS 09: Jars not in external Library - Patch available?

    Hello experts,
    I am facing the problem described here:
    https://forums.sdn.sap.com/click.jspa?searchID=131779&messageID=2755058
    The result of the discussion is that the jars not being included in the external library is a bug of NWDS SP 9.
    Is there already a patch available? I searched throught Service Market Place but there is only a patch for Developement Infrastructure (DI Build Tool).
    Thanks for help,
    Enrico Lenk.

    Hi Maksim,
    Here you are the content of application-j2ee-engine.xml from EAR project
    <?xml version="1.0" encoding="UTF-8"?>
    <application-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="application-j2ee-engine.xsd">
    </application-j2ee-engine>
    And just in case, content of ejb-j2ee-engine.xml from the EJB project
    <?xml version="1.0" encoding="UTF-8"?>
    <ejb-j2ee-engine xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="ejb-j2ee-engine_3_0.xsd">
    </ejb-j2ee-engine>
    Libraries i'm using are: mdm-admin.jar, mdm-common.jar, mdm-core.jar, mdm-data.jar, mdm-extension.jar, mdm-protocol.jar and mdm-publishing.jar
    Not sure what's the prefered option, if use these libraries as external jars or add to my project as dependency
    Thanks a lot in advance
    Pablo

  • Error Loading External Library - worked on 10g, now upgraded to 11g and not

    I have an external C library that have been using for years to extracy binary data (images, docs, pdfs etc) from a blob column in a table
    This has been working on Oracle 10.2.0.1 on Windows 32 bit for years.
    I have a new server, Windows 2008 64 bit, have installed 11.2.0.1, created a database and done a full datapump export and import.
    My application seems to work fine with the exception of this external dll
    I have made sure the dll is in the correct directory on the server and the library is pointing to it :
    create or replace library EXTERNPROCEDURES as 'C:\oracle\extern\extern.dll';I then have the same wrapper code that works fine on 10g, is there something I need to do on 11g to "authorise" the external dll or anything as I know the security is tighter or is there an issue with the fact this is 64bit Oracle?
    I have set the listener.ora to be the same as on 10g
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
          (ADDRESS_LIST =
            (ADDRESS = (PROTOCOL = TCP)(HOST = DB12)(PORT = 1521))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = PLSExtProc)
          (ENVS = "EXTPROC_DLLS=ANY")
          (ORACLE_HOME = c:\oracle\ora11g)
          (PROGRAM = extproc)
        (SID_DESC =
          (GLOBAL_DBNAME = UPAD)
          (ORACLE_HOME = c:\oracle\ora11g)
          (SID_NAME = UPAD)
      )And the TNS names file
    EXTPROC_CONNECTION_DATA =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
        (CONNECT_DATA =
          (SID = PLSExtProc)
          (PRESENTATION = RO)
      )Wrapper:
    create or replace procedure OutputString(
      p_Path in varchar2,
      p_Message in varchar2,
      p_mode in varchar2,
      p_NumLines in binary_integer)
    as
    external
      library externProcedures
      name "OutputString"
      with context
      parameters (context,
                  p_Path string,
                  p_path INDICATOR,
                  p_Message string,
                  p_message INDICATOR,
                  p_mode string,
                  p_mode INDICATOR,
                  p_NumLines int,
                  p_numlines INDICATOR)
    ;And the actual pl/sql code
    create or replace procedure extract_b
    (pname in varchar2
    ,ppath in varchar2
    is
         vBlob          blob;
         vLen          number;
         vRaw          raw(10000);
         i          number;
         j          number := 10000;
    begin
         select blob_content into vBlob from wwv_document$ where name = pName;
         -- find the length of the blob column
         vLen :=  DBMS_LOB.GETLENGTH(vBlob);
         -- Read 10000 bytes at a time
         i := 1;
         if vLen < 10000 then
         -- If the col length is < 10000
              DBMS_LOB.READ(vBlob,vLen,i,vRaw);
              outputstring(pPath,rawtohex(vRaw),'wb',2*vLen);
         -- You have to convert the data to rawtohex format. Directly sending the buffer data will not work
         -- That is the reason why we are sending the length as the double the size of the data read
         else
         -- If the col length is > 10000
              DBMS_LOB.READ(vBlob,j,i,vRaw);
              outputstring(pPath,rawtohex(vRaw),'wb',2*j);
         end if;
         i := i + 10000;
         while (i < vLen ) loop
         -- loop till entire data is fetched
              DBMS_LOB.READ(vBlob,j,i,vRaw);
              outputstring(pPath,rawtohex(vRaw),'ab',2*j);
              i := i + 10000 ;
         end loop;
    end;Any ideas?
    Thanks
    Robert

    I call extract_b from sqlplus, which calls outputstring which fails with the error message posted
    Not really sure what else I can provide as I've posted the code for outputstring
    The problem is the for some reason Oracle cannot load the dll, I think the code is fine as it has run on 10g, I think the issue is maybe along the lines that there is something extra in 11g I need to do to set the external library up or it's not happy with the fact it's 64bit or the listener.ora needs to be different in 11g or something like that but I am at a loss as where to look

  • Error: unknown entity type 'Archive' when building external library

    Hi,
    This is what I get when trying to build a external library in SP14. If I look at the Libraries.pp files there are entries like this:
    <entity>
         <name>CLASSES12.JAR</name>
         <package></package>
         <caption>CLASSES12.JAR</caption>
         <description></description>
         <entity-type>Archive</entity-type>
         <entity-sub-type>Java Library</entity-sub-type>
    </entity>
    CLASSES12.JAR is a jar file I've added to the libraries folder and then added to the Public part (used <a href="/people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro blog</a> as an example)
    Build log:
    Development Component Build (2006-02-23 10:27:16)
    Component name: lib
    Component vendor: XXXXXXXXX.com
    SC compartment: MyComponents
    Configuration: LocalDevelopment
    Location: local
    Source code location: jarpak@XXXXXXXXX
    DC root folder: C:\Documents and Settings\jarpak\.dtc\LocalDevelopment\DCs\XXXXXXXXX\lib\_comp\
    DC type: External Library
    Host: XXXXXXXXX
    DC Model check:
    [dcmake] All used DCs are available locally
    [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/externalarchive"
    [dcmake] DC model check OK
    Start build plugin:
    [dcmake] using build plugin: sap.com/tc/bi/bp/externalarchive
    [dcmake] starting build plugin from : C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\externalarchive\_comp\gen\default\public\lib\
    Build Plugins Version 6.40.0.111 (ExternalArchivePlugin, 630_VAL_REL ) from 2005-09-09 23:37:14 CEST
    Building development component 'lib', vendor 'XXXXXXXXX', type 'External Library'
    software component 'MyComponents', vendor 'sap.com'.
    location 'local'.
    source code location 'jarpak@XXXXXXXXX'.
    General options:
    convert *.xlf to *.properties: yes
    include sources for debugging: yes
    Reading BuildInfrastructure extension from DC tc/bi/util (vendor sap.com)
    Added technology 'sap.com/tc/bi/core'
    Error: unknown entity type 'Archive'.
    Cleaning up.
    Regards,
    Jari

    Hi,
    Solved it on my own with
    Re: Activation Error: "unknown entity type 'Archive'" thread.
    Jari

  • How to use external library(in .jar format) in netbeans project?

    How to use external library(in .jar format) in netbeans project?
    Thanks!

    How to use external library(in .jar format) in netbeans project?
    Thanks!

  • Debugging in "strict mode" while using external library assets

    Hi everyone. A new ActionScript-3 user here with a question on strict mode.
       I have multiple Flash pages which use the same art assets. To support modularity and possibly decrease total download time, I have implemented this by placing the shared assets into the library of a shared .swf file (the other .swf files all load this shared .swf file). The shared .swf contains ActionScript routines to place instances of the assets onto the stage and to perform other common functionality.
       A drawback to this strategy is that, correct me if I'm wrong, "strict mode" can not be used to debug calls to functions which exist in external .swf files. That is, if the parent .swf makes a call to a function which is defined within an externally loaded .swf, that function call will be reported as an error in strict-mode because Flash is unaware of the contents of an external .swf at compile time (though it is aware at run-time.)
       My understanding is that shared code can be compiled under strict-mode if the shared code exists purely as an external .as file, not as an external .swf file. However, again please correct me if I'm wrong, art assets which are shared at run-time must exist in an external .swf file. Therefore, by my understanding, if run-time shared assets are desired, then strict mode will not properly compile the projects.
       Is my understanding correct?
       Thanks for any help,
         - Rashid

          Posting an update.
          I have since found a way to compile in strict mode a project which loads an external .swf and acesses its functions. This external swf is able to have a library of its own which is accessed in the external swf's own ActionScript.
          Unfortunately, the solution I have found increases the size of the project's compiled swf. If anyone knows of a way to solve this problem without increasing swf size, I would be quite grateful if you were to share your knowledge.
          Posted below is the solution I am aware of, which increases file size. In these steps, “main project” refers to the top-level Flash project which is attempting to load other swf's. “External project” refers to an swf which is to be loaded by the main project.
    1) Publish the external projects as swc files. “Swc” is a class file, and is to be accessed by the main project when debugging under strict mode. The .swc presumably contains information about external project's library items which are to be exported for ActionScript.
          To create an .swc file, head to “File->Publish Settings...->Flash”. Check the “Export SWC” box.
    2) In the main project, add the external projects' .swc files to the external library path. This is found in, “File->Publish Settings...->Flash->Settings->External library path”. Either individual swc files can be added here (via the SWC file button) or the name of the directory where they reside (via the Path button). Both approaches should work.
    3) Somewhere in the main project's ActionScript, the external project is likely being loaded via a line of code similar to myLoaderObject.load( myURLRequest ). For this new approach, it is now necessary to make use of the second parameter to load(), the loader context. Here's the new line of code:
    myLoaderObject.load( myURLRequest, new LoaderContext( false, ApplicationDomain.currentDomain ) );
          If the LoaderContext parameter is NOT passed, then Flash unfortunately shall not report this as an error. Instead, you may observe strange behavior when the external swf attempts to use its exported library items.
    4) If the main project's code refers to the external project's class by name, then that class will need to be “import”ed into the main project's code. Without this, the compiler will complain about not recognizing the class.
    5) In the main project, edit  “File->Publish Settings...->Flash->Settings->Source path”.  Add the path to the external project's .as class file. Without this, the main project shall give a run-time error of not being able to find the external class.
       This final step, 5, is what increases the size of the main project's swf. I have a project with a few nested .swf loads, and the main project's swf increased by about 10Kb when using this solution.
          This does not seem proper. That is, one would desire the sizes of the final swf's to remain unchanged regardless of the level of compile-time error reporting. If my interpretation of an .swc class file is correct, then it seems logical to presume that step 5 above should not even be necessary, because the class information is given to the compiler/debugger through the .swc.
       Anyone know what I am doing wrong, or otherwise how to get around this problem?
       Thanks bunches.

  • External library DC vs J2EE Server Component - Library DC

    Hi all,
    I have been developing where I used jars through the public part of an external library DC and it worked fine, but I'm wondering:
    What is actually the difference between a external library DC and a J2EE Server Component - Library DC  ?
    When do i use the external library DC and when do i use the J2EE library DC?
    Kind regards,
    J.

    Hello Mark,
    I tried what you said in the following scenario:
    I created Proxy classes for Enterprise Connector for a BAPI from a backend system.
    Those classes where put in a jar. That jar is put in a external library DC with an assembly public part and a compilation public part.
    From that i tried two method:
    Method 1: i referenced the public parts (assembly and compilation) from external library DC in my web dynpro DC and it worked fine.
    Method 2: I referenced the public parts (assembly and compilation) in a J2EE library DC ( for compilation: build time ; for assembly: build time and runtime with strong). In my Web Dynpro DC i referenced the compilation public part from my external library. And in the properties of my web dynpro project i added the reference to my j2ee library (that was also deployed; i can see it in my visual administrator). When running my application, i get the following error:
    <i>java.lang.NoClassDefFoundError: com/sap/aii/proxy/framework/core/AbstractProxy -
    Loader Info -
    ClassLoader name: [gtsc.jnj.com/testapptestwdp] Parent loader name: [Frame ClassLoader] References: common:service:http;service:servlet_jsp service:ejb common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore interface:resourcecontext_api interface:webservices interface:cross interface:ejbserialization sap.com/tcwddispwda sap.com/cafeugpapiwd sap.com/tcwdcorecomp service:webdynpro service:sld library:tcddicddicservices library:com.sap.aii.proxy.framework library:tcgraphicsigs library:tcwdwslib library:com.sap.mw.jco library:com.sap.lcr.api.cimclient library:sapxmltoolkit library:com.sap.aii.util.rb library:cafeugpapi library:com.sap.util.monitor.jarm library:tcddicddicruntime library:com.sap.aii.util.xml library:gtsc.jnj.comjcrauweltestr3proxieslibrary library:com.sap.aii.util.misc library:tccmi Resources: C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\src.zip C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\commons-collections-2.1.1.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\cglib-2.1.3.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\asm-attrs.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\gtsc.jnj.comtestapptestwdp.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\dom4j-1.6.1.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\hibernate3.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\commons-logging-1.0.4.jar C:\usr\sap\NDW\JC01\j2ee\cluster\server0\apps\gtsc.jnj.com\testapptestwdp\webdynpro\public\lib\asm.jar Loading model: {parent,references,local} -
    The error occurred while trying to load "com.jnj.gtsc.im.jcrauwel.proxies.MyR3Proxies_PortType".</i>
    Any idea what i'm doing wrong?
    Kind regards,
    J.

  • Context: Error loading external library

    Oracle 8.1.5EE, Solaris 8 (x86)
    create index quick_text on quick ( text )
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: ConText error:
    ORA-06520: PL/SQL: Error loading external library
    ORA-06522: ld.so.1: extprocPLSExtProc: fatal: relocation error: file
    /oracle/app/oracle/product/8.1.5/ctx/lib/libctxx8.so: symbol ociepgoe:
    referenced symbol not found
    ORA-06512: at "CTXSYS.DRUE", line 122
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 34
    ORA-06512: at line 1
    whats the problem ?!
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Omar Alonso ([email protected]):
    Make sure that the Net8 listener is running and is configured to invoke external procedures.<HR></BLOCKQUOTE>
    Of cause its running and configured as follows:
    listener.ora:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (PROGRAM=extproc) (ORACLE_HOME=/oracle/app/oracle/product/8.1.5)
    (SID_NAME=PLSExtProc)
    tnsnames.ora:
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    LD_LIBRARY_PATH - ok to lib and lib/ctx
    + /var/ld/ld.conf - correct
    + ENVS=LD_LIBRARY_PATH=... - set
    I dont understand whats the problem ;-(
    services looks like this:
    PHNET3 has 5 service handler(s)
    DEDICATED SERVER established:0 refused:0
    LOCAL SERVER
    DISPATCHER established:94 refused:0 current:13 max:254 state:ready
    D000 <machine: phnet3, pid: 19391>
    (ADDRESS=(PROTOCOL=tcp)(HOST=195.133.235.229)(PORT=34087))
    DISPATCHER established:162 refused:0 current:13 max:254 state:ready
    D001 <machine: phnet3, pid: 19393>
    (ADDRESS=(PROTOCOL=tcp)(HOST=195.133.235.229)(PORT=34088))
    DISPATCHER established:132 refused:0 current:13 max:254 state:ready
    D002 <machine: phnet3, pid: 19395>
    (ADDRESS=(PROTOCOL=tcp)(HOST=195.133.235.229)(PORT=34089))
    DEDICATED SERVER established:0 refused:0
    LOCAL SERVER
    PLSExtProc has 1 service handler(s)
    DEDICATED SERVER established:0 refused:0
    LOCAL SERVER
    null

  • SWC as external library file

    i have created 2 project, library project
    (myLib) and actionscript project
    (myApp)
    which library project are only classes without any visual.
    i use the
    myLib in my
    myApp by setting through
    project properties -> actionscript build path ->
    library path -> add project ->
    myLib
    it work well when i chose the Link Type = Merged into Code
    but
    myLib will used for many application at my domain(same), so
    i change the Link Type to "External"
    and
    myApp wouldnt compile, it throw error missing classes
    i have try to copy the myLib.swc to
    myApp bin path, not working
    extra the myLib.swc and copy the library.swf to
    myApp bin path, not working
    rename the library.swf extra from myLib.swc to myLib.swf and
    copy to
    myApp bin path, not working
    how to work on "External" library?
    thankyou

    Hi all,
                    I have changed the swc file link type to External and compiled it. It throws no error. But when i tried to run the application it throws an error like this
    VerifyError: Error #1014: Class IDeferredInstantiationUIComponent could not be found.
        at flash.display::MovieClip/nextFrame()
        at mx.managers::SystemManager/deferredNextFrame()[C:\autobuild\3.2.0\frameworks\projects\fra mework\src\mx\managers\SystemManager.as:319]
        at mx.managers::SystemManager/preloader_initProgressHandler()[C:\autobuild\3.2.0\frameworks\ projects\framework\src\mx\managers\SystemManager.as:2945]
        at flash.events::EventDispatcher/dispatchEventFunction()
        at flash.events::EventDispatcher/dispatchEvent()
        at mx.preloaders::Preloader/timerHandler()[C:\autobuild\3.2.0\frameworks\projects\framework\ src\mx\preloaders\Preloader.as:398]
        at flash.utils::Timer/_timerDispatch()
        at flash.utils::Timer/tick().
    can any body help me.
    regards,
    Jayagopal.

Maybe you are looking for

  • Class weblogic.management.WeblogicMBean not found

    Hi all I meet this problem when I try to run Junit test case in fork mode (starting each test in a separate JVM) using Build ant file. [junit] Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/management/WebLogicMBean [junit]      a

  • PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

  • AIR html development

    Hi all , I am developing air application using html+javascript. I have main html page in which their is  link btn which open second html page. can you please let me know how to achive this code functionality. really looking for the you reply

  • Executing workflow after import

    Hello all, I’m trying to automatically launch a workflow which contains only one assignment. It is active and configured with the ‘Record Import’ Trigger Action on Data Manager. On Import Manager, I have selected it on the ‘Checkout/Workflow’ option.

  • Updating CardLayout GUI

    After reading the grphics tutorial and about ten threads on the subject no answer was given, so I had no other way but to post a question... I have a CardLayout GUI which needs to add a JPanel with some calculations on it when asked to. It gets an Ar