EXTERNAL LINE COMMAND

HI
MY CUESTION IS: I CAN´T EXECUTE IN THE EXTERNAL LINE COMMAND THE RESPONSE IS THAT I´M NOT LOGIN BUT I´M LOGIN IN THE DATABASE AND I CAN EXECUTE COMMAND IN THE BROWSER BUT I WANT IN THE EXTERNAL...
SOMEONE HELP ME PLEASE
I WILL BACK
Edited by: user12887371 on 01-abr-2010 1:13

Please browse internet about Scheduled External Job this procedure can help you.

Similar Messages

ICal Group Calendar - Line command

Does anyone know how to create a group calendar other than through the wiki interface? I would think there is a line command as well.
I have created group calendars on several osx servers in the past. I have two 10.6.4 servers that seem to have an authorization or communication issue when creating the calendar through the wiki.
Apache: *PROPFIND /principals/wikis/company/ HTTP/1.1" 500 201*
Ical err Failure: *twisted.internet.error.ConnectionRefusedError: Connection was refused by other side: 61: Connection refused*.
Accessing the group calendar through the wiki give in in browser error:
quest URL:
*https://www.mycompany.com/principals/wikis/company/*
*Request Method:PROPFIND*
*Status Code:500 Internal Server Error*
I thought I'll debug it further by creating a group calendar by command line. Does anyone know how to do that? Or any other suggestions where to continue?

Thanks for that, Jonathan, but it appears to have a problem: you apparently can't use the Address Panel if you fill in the Account URL field, and all the attendees I fill in to events aren't "real" they have little exclams before their name, instead of check marks.
It seems that the Address Panel only works with accounts that have "Automatically discover server address" checked, and each account for which you have that checked must have a different Username -- you can't use a group name.
I suppose you could set up dummy user names so you could access the groups somehow, AND have the Address Panel working properly...
It's too bad this stuff doesn't work better. I'll bet it doesn't get better before the next "kitty" release, 18-24 months from now...

Multi-line command problems

I am trying to add an motd banner to a configuration template in template center. When I add it I get the following error on the import:
Template import Failed. Unable to parse the XML file.Please ensure that the XML file is complaint to the schema.
I went to the config manual and copied the multi-line command example exactly as shown and added it to my template:
<MLTCMD> banner login "Welcome to
Cisco Prime LMS - you are using
Multi-line commands" </MLTCMD>
I still get the import error. I have never been able to get multi-line commands to work in any version of LMS. Is this a known issue? Is there a fix?
-Jeff

The ability to import templates with multi-line support was not added until LMS 4.1. You also have to use < and > instead of < and > as the MLTCMD tag is embedded into XML and not part of the XML itself. Here's an example from the SCH template:
crypto ca authenticate cisco<R><MLTCMD>-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----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=
-----END CERTIFICATE-----
END OF INPUT</MLTCMD><R>yes

External OS Command SM49

Hi All,
Is it possible to run External OS Command created in Tcode SM49 by File Adapter.
We are running SAP PI IBM OS i5 and need to call RPG program from File Adapter, if i create custom OS command in SM49 and able to execute the same command from File adapter then my problem has been fix.
In out BI environment we are doing the same but i never use it PI.
With Regards
Sunil

Sunil,
You mentioned if i create custom OS command in SM49 and able to execute the same command from File adapter:
I dont see any difference in calling this script from the file adapter. Put all the commands in the script and you can call the script directly from the file adapter. What ever you can achieve from sm49 you can achieve the same from file adapter also. I didnot work this practically, but I dont see you should run into any issues.
Regards,
---Satish

Command line commands

Is there any class in the default java SDK for executing command line commands? I've been looking in the API but have been unsuccessful so far.
Thanks.

when i execute the command, the process created goes for half a minute or so, but the java program just ends straight away.
is there any way to keep the java program open as long as the process is still running?

"Open with External Editor" command bug?

Seems to be a bug with "open with external editor" command. If I try it just after Aperture has been opened, it usually works (sometimes not). And then after a couple of photos being edited in photoshop, it sometimes stops working. When I try it, it simply gives me SBBOD for a few seconds (which it does when it's working as well), and then nothing happens. No new master created in Aperture, and nothing in Photoshop. If I restart the program, it usually takes care of the problem, and it will work again for a bit. Sometimes restarting the program doesn't even work, and I have to reboot. Very strange.
Any one else getting this? Any ideas?
I'm using 1.1.1 and Photoshop CS2.
powerbook G4 1.5 Ghz Mac OS X (10.4.6) 2 GB RAM, ATI Radeon 9700 (64MB VRAM), 80 GB ATA HD (5400rpm)

Anyone out there? No one else experiencig this "bug"?
Help, please.

Edit with external editor command in iPhoto

I know there is a way to set IPhoto so you can use both iPhoto and PS Elements editors to edit photos. I have seen the "*Edit with external editor*" command within the Edit header within iPhoto but can't figure out how to do this. I found the below and tried it but it doesn't allow me to set two editors within Preferences. What am I doing wrong?
+"If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and select "Edit in external editor" in the Contextual menu). This way you get the best of both worlds"+
Thanks,
Scott

FIRST set external editor to PSE
THEN change the selection back (NOT TWO selections - just this one) edit in main window leaving PSE as the external editor
once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window".
+You are working VERY hard to make this dificult - *it is simple*+
Set PSE as the external editor THEN select edit in main window as the default without changing PSE being the external editor - One selection - EDIT IN MAIL WINDOW
NOW double clicking will edit in iPhoto -- Right clicking (or control clicking) will give you a contextual menu allowing you to choose PSE as the editor
LN

Command line command for combine jpeg files into a pdf file

I want to learn if we have any command line sentence to combine jpg files.
normally from the windows explorer window
i can select all jpg files and when i click on right button on the window they shows Combine supported files in acrobat and then i check if single file is selected and i clicked on combine files button.
and then i put name of the file and press the save button.
But i want to process this steps via command line commands.
Can you show any answer to me.

You don't say what version of Acrobat you are using, but I expect you could do it with Acrobat XI's Actions feature. Maybe even in 10.0. Since this is an enterprise deployment forum, I suggest you find a better forum and ask about Actions and Batch Processing.
hth,
Ben

HiQ doesn't execute scripts and command line commands

I am running HiQ pro 4.5 on Windows 2000 SP 2. Whenever I enter a command line command, e.g. "1+1", HiQ reports "no error reported" and doesn't execute the command. When I enter the same command again, HiQ tells me that a semicolon is missing.
When I try to execute a script, HiQ reports "Fatal Script error on line -1".
Anybody knows this behaviour and how to get HiQ running normally?

I do have the same problem.

Open a forms in line command with pll attached.

Hi guys,
I'm trying to open one fmb by line command, but this fmb has a pll attached and i receive the error frm-18108, so
there is a somehow to open this forms with his pll, in line command....
if I try with one fmb without pll, he works out
i´m using forms 6i and oracle 10g
ifbld60.EXE c:\sa\fmb_work\wx010.fmbl userid=wl/wl@P10G
thanks...

There are two ways for the Forms Runtime to find the attached PL/SQL Library.
First, the .pll file must be located in a directory with the exact same path used when the .pll is attached to the .fmb. For example, if you attach a library called "TESTING.pll" to your form in the Forms Builder and this TESTING.pll is located in C:\TESTING, then when you run your form on a client computer, you must have a C:\TESTING directory with the TESTING.pll file in this directory. When you attached your .pll, you would have received the message, +"Attached library name C:\TESTING\TESTING.pll contains a non-portable directory specification. Remove path?"+ You would have answered "No" to this alert.
Second (and preferred method), is to remove the non-portable directory specification by answering "Yes" to alert listed above. When you distribute your Forms executables to your client computer, you will need to ensure you deliver your library executable as well (.plx). For the Forms Runtime to find your TESTING.plx library, you will need to have the FORMS_PATH environment variable specified on each client computer and have the C:\TESTING directory listed in this FORMS_PATH variable, as well as the directory when the rest of your Forms executables (.fmx) are located. The FORMS_PATH can also be specified in the Windows Registry as Amatu Allah indicated when he/she asked:
Have u set the paths in registery correctly.?You can tell if you have a non-portable directory specification on your library by opening the property pallet for your attached library. If you have a non-portable directory specified, it will be listed in the PL/SQL Library Location property.
Craig...

Line commands

<b></b>
hai ,
what are line commands and how many times these executed
thanku in advance
kiran

Hello
Line Commands
Line commands are used to format and change the source text of schemas and personnel calculation rules. These commands are entered directly in the line number field for each line of the source text.
The line commands available currently are listed below:
Command
   Description
   The selected line is displayed as the first line in the Editor.
A
   The target line for the copy (C/CC...CC) or move (M/MM...MM) command. The lines that have been copied or moved are inserted directly after the selected target line.
B
   The target line for the copy (C/CC...CC) or move (M/MM...MM) command. The lines copied or moved are inserted directly before the selected target line.
C
   Copies the selected line to the target line specified by the command A or B.
CC...CC
   Copies the selected line block or line range to the target line specified by the command A or B. Enter CC in the first and last line of the block you want to select.
D
   Deletes the selected line.
DD...DD
   Deletes the selected line block or line range. Enter DD in the first and last line of the block you want to delete.
I
   Inserts a blank line directly beneath the selected line.
In
   Inserts n blank lines directly beneath the selected line.
M
   Moves the selected lines to the target line specified by the command A or B.
MM...MM
   Deletes the selected line block or line range. Enter MM in the first and last line of the block you want to move.
R
   Duplicates the selected line. The copy is inserted in the line directly beneath the original.
Rn
   Repeats the selected line n times. The copies are inserted directly beneath the original.
X
   Copies the content of the X buffer beneath this line.
XX...XX
   Writes the selected line block to the X buffer. Enter XX in the first and last line of the block that you want to write to the buffer.
>
   Expands or displays a subschema. This command can only be used if the line contains the COPY function.
<
   Undoes the expansion of a subschema. This command undoes the > command.
Reward point please.
Regards
Vikas

Line Command

Hi,
Is there any command/fuction that works like isql from SQLSERVER? I want to simulate a line command on the PL/SQL script.
Thanks
Carla

This means that you want to execute an OS command from within the PL/SQL procedure.
Look at the following links:
http://asktom.oracle.com/pls/ask/f?p=4950:8:1407964::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:1514388734200,%7Bos%7D%20and%20%7Bcommand%7D%20and%20%7Bfrom%7D%20and%20%7Bpl%2Fsql%7D
http://asktom.oracle.com/pls/ask/f?p=4950:8:1407964::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:1993409963502,%7Bos%7D%20and%20%7Bcommand%7D%20and%20%7Bfrom%7D%20and%20%7Bpl%2Fsql%7D
http://asktom.oracle.com/pls/ask/f?p=4950:8:1407964::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:952229840241,%7Bos%7D%20and%20%7Bcommand%7D%20and%20%7Bfrom%7D%20and%20%7Bpl%2Fsql%7D
http://asktom.oracle.com/pls/ask/f?p=4950:8:1407964::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:3618360089466,%7Bos%7D%20and%20%7Bcommand%7D%20and%20%7Bfrom%7D%20and%20%7Bpl%2Fsql%7D
http://asktom.oracle.com/pls/ask/f?p=4950:8:1407964::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:3069633370832,%7Bos%7D%20and%20%7Bcommand%7D%20and%20%7Bfrom%7D%20and%20%7Bpl%2Fsql%7D

There is a UNIX line command for Core audio RAM size addressing?

Hi all
There is a Terminal line command that allow me to addressing more ram size in the Logic AUDIO preferences?
I greatly appreciate your help
Thanks in Advance!
G

fermusic wrote:
please stay focused to that picture
I don't look for magician..
I know that there is terminal command for change setting about song backup count...
since Logic 8 the Project Backup has been fixed to 10...
I mentioned defaults in my first post. 'defaults' is the command line utility to set the maximum number of backups, and the key/value is clearly visible in the file, where I see no clearly identified key for the preference setting you seek.
so you can type 'man defaults' into terminal to read the manual for defaults.
Also in Logic 6 32bit application... and in Logic 7.2.3 (32bit application)
there is a setting that allow me to addressing 384Mb to the system core audio... and it is not a 64 bit apps.
Memory addressing != Memory allocating
I'm looking for a Terminal command that can rewrite Logic preferences files... in the same way as made for change the Song Backups number...
Please stay focused I don't need theoretical explaination..
I'm a Musician... I'm not a Developer...
BUT I Know.. for sure...I can adress 384Mb for core audio...
I need to bypass the automatic ram adressing only and strictly focused to achieve 384MB just for CORE AUDIO!!!
Right right right. I addressed that by typing:
you'd have insider info to use that utility for the intentions that you have in mind
If that preference exists, it is not public knowledge (to my knowledge). You would need to know a few things about the preference key/value to set or remove it.
So, yeah - my original post covered it all, to the best of my knowledge.
J

Execute external java command line in Java

But I can not get any result ( It does not create file test.svg) . the code is as follow
Runtime.getRuntime().exec("java -jar c:/XSLT/saxon7.jar ../webapps/wfscontroller/gml.xml ../webapps/wfscontroller/SVG.xsl > ../webapps/wfscontroller/test.svg");
If I execute "java -jar c:/XSLT/saxon7.jar ../webapps/wfscontroller/gml.xml ../webapps/wfscontroller/SVG.xsl > ../webapps/wfscontroller/test.svg" in DOS command. it works.
Anybody knows what happened?
Many thanks in advance.

The > is interpreted by the shell. When you use Runtime.exec, you don't go through the shell, you exec the executable directory. So when you exec that command, you're passing ">" as an argument to "java -jar c:/...", and chances are the main() method in that doesn't interpret ">".
So the upshot is you can't use ">", "|", "<", etc., that you can in a shell, with Runtime.exec().
Other options are to run a batch file which invokes that command line.
Or, you can get the standard output from the exec'ed process, and save it to a new file yourself.

Tcode SM69 - External OS Command

Hi guys,
I need help for tcode SM69
How do we access a BAT file from a directory path for example
C:\Program Files\Software_ABC\Deeper_folder\genxy.bat
Operating System = windows nt
Type = Customer
But I have no idea how to go about for the Operating System Command.
I'm supposed to run it like
C:\Program Files\Software_ABC\Deeper_folder\genxy.bat "E:\usr\sap\EWD\DVEBMGS00\data\File_20110107114455.xml"
Any advice? Appreciate it

you create external command and pass command name in FM
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
or u can use following way
CONSTANTS: c_extcom    TYPE sxpgcolist-name VALUE 'ZTEST',
           c_oper      TYPE syopsys VALUE 'Windows NT'.
DATA: v_dir_input      TYPE sxpgcolist-parameters. " Input Directory
DATA: t_result         TYPE STANDARD TABLE OF btcxpm.
v_dir_input = 'cmd /c C:\Program Files\Software_ABC\Deeper_folder\genxy.bat'.
CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
EXPORTING
    commandname                   = c_extcom
    additional_parameters         = v_dir_input
    operatingsystem               = c_oper
TABLES
    exec_protocol                 = t_result
EXCEPTIONS
    no_permission                 = 1
    command_not_found             = 2
    parameters_too_long           = 3
    security_risk                 = 4
    wrong_check_call_interface    = 5
    program_start_error           = 6
    program_termination_error     = 7
    x_error                       = 8
    parameter_expected            = 9
    too_many_parameters           = 10
    illegal_command               = 11
    wrong_asynchronous_parameters = 12
    cant_enq_tbtco_entry          = 13
    jobcount_generation_error     = 14
    OTHERS                        = 15.

EXTERNAL LINE COMMAND

Similar Messages

Maybe you are looking for