External Microphone Input?

The iPhone headset's (or similar one plug headset) microphone and headphone can be used by plugging the headset into the headphone jack. In Mac OS X, the internal microphone option changes to external microphone.
Boot Camp doesn't seem to recognize this. All I get is the internal microphone, the line-in jack, and the digital input (SPDIF).
Is there a way or a driver to enable the use of the microphone input for the headphone jack?
Thanks!

first of all, i don't work for lenovo.
i'll try to find a specific answer for you. ( i will post here if i can find )

Similar Messages

There is an external microphone input on my notebook?

Hi!
I'm not sure this is the right section where I can post this question.
Anyway: I bought a pair of headphones with a microphone to use on my ENVY m6, but when I tried to find the input for the external microphone jack... I dind't find it.
I tried to plug them both in the headphones jack with a '2 to 1' jack converter but the microphone still didn't work.
There's a solution or just I can't connect an external microphone to my notebook?
Thank you so much and sorry for my bad english.
Elisa

Hi @EllieInTheSky ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY m6 Notebook and issues with the microphone headset. Here is a link to troubleshoot the headset and microphone. Your notebook supports a plug in stereo headphone combo jack.
What make is the headset?
Press the Windows key, type microphone, under settings you will see setup a microphone. It will bring a wizard up and you just select which one you have.
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Anyone successful using external microphone?

Anyone successful using external microphone?
Tried using 1/8 external microphone input with RadioShack PZM microphones. The mic works in GarageBand, iMovie and VO tool work, but iChat will not use the microphone. Audio is visible in system preferences???
Thank you,
Shawn Bockoven

1.     Opened package
2.     Placed battery in microphone RadioShack 33-3022 Boundary
3.     Plugged in mic using 1/8 mini jack on iMac 2.0 10.4.2
4.     Opened System Preferences and changed input to audio line-in port
5.     Launched iChat 3.0
6.     Opened video preview/preference and changed audio input to line in
7.     Became very frustrated
8.     Tested in GarageBand mic worked
9.     Tested in iMovie mic worked
10.     Tested using VO tool mic worked
11.     Launched iChat again checked all setting mic does not work
http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&product%5Fid=33-3022

Audio input through external microphone not 'heard' by computer

I can record audio with any app through the builtin mic. And I know the system 'hears' sound through the builtin mic when I go to SystemPreferences->Sound->Input.
I have an external microphone that I want to record through. I went to SystemPreferences->Sound->Input and chose 'Line In' and plugged in the microphone's lead into the 'in' jack. However the SystemPreferences->Sound->Input Input Level sensor/detector is dead -- it shows no audio input. Nor does iMovie pick up any audio input when the mic is plugged in.
I know the input jack works by plugging in the output pin from a cassette-player, choosing 'Line In', and playing a cassette. The Input Level sensor/detector comes on and the sound is available to apps.
I know the external microphone works by plugging it into the cassette-player and recording from it and tapping and rubbing on its pick-up. The sounds are captured on cassette tape.
So why is audio input through external microphone not 'heard' by the computer? Is there some trick to making it work?

There are a few possibilities, but the most likely is that your microphone does not produce enough signal to be "heard" through the Mac line input. Usually this is normal, with most microphones producing perhaps 1/100th of the signal needed, which would be called "mic level".
You cassette deck probably outputs "line level", much stronger and strong enough to register in the Mac Line input. Similarly, the cassette deck microphone input is probably "mic level" and much more sensitive than the Mac line input.
There are other possibilities, such as a powered microphone, but you have not provided any model numbers or specifications to analyze.
Try this: plug in the microphone like you did before, and make a really loud sound right in front of the mike, like clapping hands. You may see or hear a faint sound register on the Mac.
The usual cure is to buy a microphone preamplifer. You can also buy a new microphone with a built-in preamplifier. You can also buy a USB microphone or preamplifier device that bypasses the analog Line input entirely.

External microphones don't work with audio input

Tell me its not true that an ordinary mic won't work with the audio input....I have 2 mics which I know to work mini jack [tried both stereo and mono] and zip! nothing....what is wrong with this equation
any ideas from the floor? [do I really have to go and buy another usb headset or an iMic to resolve this??
please tell me there's another option!
thanks
Tony

I have been unable to get the microphone input with a Viewsonic 22" monitor with webcam to work with either iChat or iVisit with my Mac Pro. There have been other reports on the web about newer versions of the OS 10 inactivating the audio input for several programs. Is this why the microphone does not work or is it true that the audio input does not act as one? If the audio input does not work with an external microphone, what is it for?

Install External Microphone in MacBook Pro

Hello, When i link External microphone to MacBook pro i can't record sound in any application !! currently i am using Adobe Audition CS6, Image bellow i can't see external microphone in Audio MIDI Setup !!
Adobe Audition CS6 Sound input setup !!!
Please Help

?

How do I connect an external microphone to a Macbook Pro with Retina display ?

How do I connect an external microphone to a Macbook Pro with Retina display ?
Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

Plug it into the linein/headphone jack if there's just one. It'll switch between the two modes automatically depending on what you plug into it.

MacBook Pro and external microphone

We bought a MacBook Pro 15" Retina a couple of weeks ago. We wanted to use it the same way as our current PC laptop: hook up an external camera via BlackMagic Shuttle Express Thunderbolt (through the Thunderbolt port), hook up an external Sennheiser Freeport wireless microphone (through the 3.5mm combination headphone/microphone jack), and hook up a set of regular headphones (through the USB port).
The idea is to videotape an event, getting good quality audio from the presenter via the wireless microphone (our space has big limitations in terms of using wired devices), and monitoring the audio through the headphones. This is a scenario and a set up where several PC units have worked perfectly well in the past.
However, after spending over $2,000 on the MacBook Pro, we found out that the 3.5mm combination port will not take input from any of the microphones we have. This YouTube video explains exactly our situation: http://www.youtube.com/watch?v=oaiYc9Cqpis (we did not create the video, but the video shows this is a common issue). On the video they explain the plug of a regular microphone has 3 rings or pins, while the plug needed for the 3.5mm combination has four rings or pins.
We spent about 45 minutes with Apple customer support, including a senior advisor, and we were told that as the Apple headphone/mic combination, the one you use with an iPhone (seen on the video above), works in the combination jack, both as a microphone and as a headphone, then there's no issue. Apple does not have any recommendation, solution, or adapter for using a regular 3.5mm microphone with the 3.5mm combination jack, so that an external microphone can be easily used. The senior advisor also suggested a USB microphone instead, but that means a) having a wired microphone, which is not possible in our space, b) buying more equipment, when we already have our equipment, and c) adapting all our setup to the MacBook Pro, instead of the machine being easily integrated into our existing setup (more likely, we will ship the MacBook Pro back instead).
A few discussions on the web (for example, https://ca.answers.yahoo.com/question/index?qid=20110505020946AA8izSV ) mention that this specific laptop expects a "line level" microphone signal, one that would come from a pre-amplifier, so that regular microphones would not be detected. The Apple senior advisor was not familiar with that claim, nor could he shed any light on it.
So our question is: has anyone successfully used an external 3.5mm microphone with the 3.5mm combination port on the MacBook Pro Retina 15"? If so, what kind of microphone did you use? Or, did you have to use any kind of adaptor or amplifier to make it work?
Thank you for any pointers you can give us.

We tried a number of 3.5mm splitters (to get separate headphone and microphone connections from the combo mic/headphone jack), and USB to 3.5mm converters (to get separate 3.5mm headphone and microphone connections from the USB port), but none of them worked.
The only solution we found to connect a microphone to a MacBook pro were the Shure XLR to USB convertor (http://www.shure.com/americas/products/accessories/microphones/microphone-proble m-solvers/x2u-xlr-to-usb-signal-adapter) and the Blue Icicle XLR to USB convertor (http://bluemic.com/icicle/). The Icicle is the cheaper back up for the more expensive Shure.
Both were recognized by the laptop, and both audio signals were detected properly. We are using them to capture voice only, so we don't know how they would fare when music and musical instruments are involved.

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

Why doesn't my external microphone work?

Yesterday I opened up Garage Band to do a recording. I have been using my Blue SnowBall microphone, and in the past, even as recently as the day before, Garage Band always recognized that mic by name, and would ask me if I wanted to use it. Now the only option it gives me is “USB Advanced Audio Device”. Obviously an automatic update had changed the way it handled recognition of my microphone. As I selected this option, I found that wasn’t the only change that occurred. The instant I made the selection all audio functions within Garage Band immediately failed, not just recording, but playing audio as well. Once I reverted back to “built in microphone” then my audio functions returned. So my Blu Snowball is no longer compatable with Garage Band. Coincidently, seconds later Garage Band advised me of the newest version of Garage Band, and asked me if I would like to update. I have seen that question before, and the answer is no. I have had too many problems before with updating. Most recently I updated to Yosemite OS X and all my projects in i-Movie became corrupted. I also read on the net that the new Garage Band frequently causes older Macs to crash. So how do I return functionality to my microphone? If it worked before it should work now. Functions should not be taken away from me. I should not be forced into updates that bring me more headaches.

Today I found that when I select "USB Advanced Audio Device" for my "input source" that if I go to garage band "preferences" and check my "audio output" it has also been automatically changed to "USB Advanced Audio Device". I'm not sure what kind devices this update was designed to accomodate , but my device is nothing more than a microphone, thence the reason I have no sound. This will happen every time I turn on or plug in the microphone, but I can still use the microphone by manually going into preferences and changing the audio output to either "system setting" or "built-in output" every time I connect my external microphone. I thought I checked all my settings and preferences before when I was trying to figure out why I had no sound, but either I missed it before or there has been another update.

How can I connect external microphone to MacBook Pro?

Hello!
I need to connect the external microphone to my MacBook Pro? How can I do it?

Some mikes have sufficient output to connect to this port, Alexey, but most don't. the solution, if you really want to use this particular mic, is to obtain a small battery or mains powered pre-amplifier to connect between the microphone and the line -in input. Alternatively there are devices which will allow you to connect your existing mic through the USB port. If you have an amplifier with a mic input already you could also use this as an intermediary, though it won't be very portable, of course!
You may find it cheaper to simply buy either a USB or "line level" mic, though.
Cheers
Rod
Cheers
Rod

External microphone won't work on Macbook Pro

My external microphone won't work on my Macbook Pro.
My mic is an SE2200 A, and I'm pluggin that into a Behringer Eurorack UB802 (with Phantom power). This is then connected to a 1/4 inch to 3.5mm adapter so I can plug it into my Macbook Pro.
If I plug this directly into my Macbook Pro into the headphone socket (which I've been told doubles up as a mic socket), and go to Settings -> Sound -> Input, the mic does not appear on screen at all.
If I plug it into a 3.5mm to USB adapter, and plug it into a USB port on my mac, then the USB PnP Sound Device appears on the Settings -> Sound -> Input, but no sound is picked up.
Could any suggest why this isn't working?
thanks

You have to use a cable that will break out the 3.5 mm TRRS jack into mic, L, and R.
I haven't found the right wiring yet and the cables I have tried don't seem to work.
See this post: What is the wiring digram on the MacBook Pro 3.5 mm TRRS jack?

External Microphone won't work!

I had recently JUST bought a headset.
I was excited to use it... I was positive that it was Mac compatible cause it said that it was ipod compatible.. my mistake I guess. Plus I needed to buy a mic under $30 cause that's all I had... and the cheapest one they had was the one I have on now.
Sooo I get it all ready.
There are 2 plug ins. One for the audio head phones... then one for the mic.
Oddly there is NO hole for a mic.. since mac already has a built in mic.. but i hate using that.
Sooo I just plug it into the next available hole.. which looks like this "|>o<|"
The mic doesn't work....
So I go to System Prefrences on my computer and it says:
+Changing your computer's sound input device+
+You can input sound into your computer using your computer's internal microphone or an external microphone. For example, you may want to use an external microphone to record your voice, or use the internal microphone to give spoken commands to your computer.+
+Choose Apple menu > System Preferences and click Sound.+
+Click Input, and then select the device you want to use for sound coming into your computer.+
So I do that..
Here were the choices:
Internal Microphone- Built In
Line In- Audio line-in port
so I click "Line In"
and my mic still doesn't work.
does this mean I have to get a new headset?
The thing is I called the place and it said that this headset IS mac compatible. Soo I dunno what's going on.
My guess that this isn't mac compatible even though the guy said it was...
Also,
Any good headsets I can get for the mac UNDER $30?

Hanners, Welcome to the discussion area!
This discussion area is for the G3 iMacs which look like this:
It sounds like you do not have a G3 iMac. It sounds like you have a G4 iMac which looks like this:
The iMac you have does NOT have an audio input port. The plug you have attached the microphone to is the output port for the Apple Pro speakers. By doing that you may have damaged your microphone AND the output port for the Apple Pro speakers.
The only way to use a microphone with your iMac is to either get a USB microphone OR use an iMic along with a standard microphone.
Message was edited by: Duane

External microphone stopped working

Product Name and Number
HP Pavillion g6 Notebook PC, LS303EA#AB9
Operating System installed
Windows 7 SP1 x64
The external microphone line suddenly stopped working, had been working perfect untill after the update of last major application instalations.
Checked sound devices, external line shows as installed butrecognizes no sounds, attempted updating drivers but no new drivers.
Audio specifications (according to HP support application):
- IDT high defenition audio CODEC (stwrt64.sys), version 6.10.6324.0
-Intel(R) Display Audio (IntcDAud.sys), version 6.14.0.3074
PS.: internal microphone still works, also the plugged in microphone still works on other computer
This question was solved.
View Solution.

Hey coolasc,
If you had a lot of updates come through, you'll want to make sure that BIOS was one of them.
BIOS stands for Basic Input/Output System/Service. It is the language that all of the hardware components in your computer use to communicate with each other. There are updates which come out periodically for it so it would be best to have the latest version. The following steps were taken from here.
Windows 8: From the Start screen, type "msinfo32". Click msinfo32 from the list of results.
Windows 7&Vista: Click the Start button, type "msinfo32". Click msinfo32.exe from the list of results.
About halfway down on the right, look for BIOS Version/Date.
3. Copy and paste the information to the right of BIOS Version/Date in the value column, into your reply.
The latest version on the HP Drive Page for your particular notebook is F.66. It could be that a lot of updates other than BIOS came through and BIOS just hasn't come through quite yet (if this is the case, it would be fine to manually install the latest version). If you have a version higher than F.66 by some chance, go back to F.66 by just downloading and installing it.
The BIOS being out-of-date or just out of sync with the other updates that came through, could definitely cause an issue like this.
Please let me know if you have any questions or if these suggestions helped (this could help others with the same issue). I'll keep an eye out for your reply!

External microphone in headphone jack on Hp envy 15-j160no ?

Hello! I just bought my Hp envy 15-j160no. I want to use my external microphone for better quality. I have plugged my microphone in to my headphone input(because I have remebered that on this computer the input is working for both headphones and microphone, right?)
But i can't get it to work, my computer only uses the microphone that is built in on the computer instead.
I use an Audyssey that was included when I bought my receiver(Onkyo nr262)
Appreciate help!
Thank you!

Hi,
Please read:
This integrated headphone / microphone port uses a 4 section plug (identified with 3 black / colored rings).
You can plug a standard headphone in, and it should work by itself. A spliter cable may be required to support a stand alone microphone properly.
Please try:
Use a headset or
Use a "Y" adapter that can connect a separate microphone
Hope this helps
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

External Microphone Input?

Similar Messages

Maybe you are looking for