External Microphone problem not working.

I am trying to get a Sony ECM-DS70P Condenser Stereo Microphone with a 3.5mm stereo male plug to work on my MacBook Pro with a Behringer UCA222 USB Audio Interface and I am having no joy at all.
Summary of Problem
The Microphone will not work when plugged directly into the Line-in jack on the MacBook Pro because the Audio Line-In input on the MacBook is line level -10dB to+4dB and microphones are generally around -40dB. So, I need either a line level preamp or a usb audio interface.
I decided on a USB Audio Interface (Behringer UCA222).
The Microphone is plugged into a 3.5mm stereo to RCA L & R cable which is plugged into the L/R RCA inputs on the Behringer UCA222. The Behringer UCA222's USB Cable is plugged into a USB port on the MacBook Pro.
On the Macbook Pro in System Preferences > Sound > the output is set to Internal Speakers and the input is set to the USB Codec (Which showed up when the Behringer UCA222 was plugged in).
But it doesn't work!
Any help from anyone would be very much appreciated.
Here are all the specs:
Sony ECM-DS70P Microphone
Frequency Response : 100-15,000Hz
Maximum Input Level : 110dB SPL (THD 1% @ 1kHz)
Noise Level : 34dB SPL
Plug : L-shaped gold-plated mini plug, 3.5mm
Sensitivity : -38dBV, ±3.5dB
Type : Electret condenser microphone
Behringer UCA222 USB Audio Interface
Link to Specs:
http://www.behringer.com/assets/UCA222_P0A31_M_EN.pdf
MacBook Pro running   OSX Lion 10.7.2
  MacBook Pro
  15" Early 2008
  2.4GHz Intel Core 2 Duo
  Model Identifier:          MacBookPro4,1
  Processor Name:          Intel Core 2 Duo
  Processor Speed:          2.4 GHz
  Number of Processors:          1
  Total Number of Cores:          2
  L2 Cache:          3 MB
  Memory:          2 GB
  Bus Speed:          800 MHz
  Boot ROM Version:          MBP41.00C1.B03
  SMC Version (system):          1.27f3
  Serial Number (system):          W88********
  Hardware UUID:          298BAA49-A3B8-549F-8A3C-************
  Sudden Motion Sensor:
  State:          Enabled

Zyriab wrote:
Glad you got to the root of your problem.   I've also been looking at USB microphones and am considering this:
http://www.amazon.co.uk/Blue-Microphones-Yeti-USB-Microphone/dp/B002VA464S/ref=w l_it_dp_o_pd_T1?ie=UTF8&coliid=I2CTU5Q76JN7AW&colid=CCYZRSRZM3G
I haven't actually tried it myself but it has a good reputation and gets very good reviews.
I have used many (most) of the Blue microphone range, especially the blueberry and the woodpecker (fabulous mic) these are xlr balanced rather than USB but the build quailty and diaphragm/enclosure design is first rate. Not quite Neumann standard but, not at all Neumann prices. Good choice.

Similar Messages

  • MICROPHONE IS NOT WORKING WITH WINDOWS 8

    HI,RECENTLY IAM UPGRADED MY LAPTOP HP G60 WINDOWS VISTA TO WINDOWS 8.FROM THAT,INTERNAL AND EXTERNAL MICROPHONE IS NOT WORKING..IS IT I NEED ANY DRIVER SOFTWARE?ANYBODY HAVE SOLUTION FOR THIS ISSE?

    Hello elshadica,
    HP is not going to support hardware for Windows 8 on any system purchased before Oct 1st 2011.  Most Windows 7 drivers will work in Windows 8.
    Check out this page to see if your computer has been tested by HP with Windows 8.
    You can run the Upgrade assistant software, which will scan your PC and generate a report on what is currently installed on your PC is compatible with Windows 8.  This upgrade guide for Windows 8 provides a lot of information that is needed for anyone considering upgrading.
    I hope this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I live in South Africa, and I had the same problem with my iPhone 4.
    After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
    ***** that i cant use Find my iPhone, but atleast i can use my phone.

  • I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI sign

    I have the iPad 2 16GB, bought it in August 2011, I worked perfectly but in mid-August 2012 I took her to the store because the microphone did not work reviewed and changed me, but to my surprise that the new iPad had the problem is disconnected WIFI signal I have to be glued to the router, and I did everything he says is supported by the Apple and all other pages and forums regarding this problem is not solved and always disconnects when connected always disconnects again!! passing will be settled as no longer factory warranty although it has neither the three months I renewed new, please help because the investment has been great and I can not use only as "a mirror" I'm waiting a true solution, thanks ....
    Sincerely,
    Catlos

    This does help me because I am pondering on wether to buy an airport extreme to solve my ipad 2 connection woes.  I have an extremely old router dLink 524....but I have NEVER had any problems with it at all ever.  My xbox connected great to it and netflix ran flawless through my xbox.....now I have an ipad2 and an apple tv and they are BOTH having horrible connection problems.  I have read most of the forums on how to fix it by changing the settings on my router but since mine is so old I couldn't do some of the suggested solutions.  So here I am debating on whether to spend all this $ on an airport extreme?  I am just hoping that if I go and purchase this, my connectivity issues problems will go away like yours did.  Just wondering if you have ATV as well and if the AE solved its problems?  I have read about AE solving ipad2 wifi problems, I'm just hoping it will solve my ATV as well.
    **Glad they didn't "moderate into extinction" your post yet, lol, Thank

  • HT201257 I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to

    I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to the store

    Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone.  Then you can look into Applications > Utilities >  Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    then go through the process of looking for the microphone again as the reset may reenable the mic.

  • HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this.  I am running windows 8 on parallels.

    Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

    It was working untill i did the update

  • Microphone does not work in Facetime

    Hi
    I read other posts and in Maverik I didn't find simmilar problem, for most people their microphone does not work after few minutes, but in my case, microphone does not work at all in Facetime, so I can hear the other end, but they can not hear me! This happened after updating Mavericks.
    My Mac specs:
    Macbook Pro 2013
    OSx 10.9.1 (Mavericks)
    things I already tested:
    I tried to use headphone and without headphone, but it didn't make any difference
    Microphone works fine in Skype and other softwares (Audacity, YahooMessenger, etc.)
    Tried with WiFi and with Ethernet cable
    Internet speed is 2.3MBps
    Router's firewall does not have any restriction for certain ports
    Tried turning facetime Off and On
    Tried to call iPhone 5s, iPad2 and MacBook Pro each in different network and different countries!
    ... and finally searching internet for hours (which obviously came up with nothing)
    I'll be thankful if somebody help me through, all suggestions are welcome, so please don't hesitate to post.

    Same issue here....
    8-core Mac Pro, Lion, Original External iSight camera connected via FireWire 400 through the FireWire jack on the 23" Apple Cinema Display.
    Audio and video work fine using iChat and making video clips through any/all apps.
    However, using FaceTime.....incoming audio and video are fine, outgoing video is fine, but outgoing audio is missing.  Nobady can hear me.
    Sorry guys...you can't doll this one up or spin it in any other direction......it's a bug pure and simple.
    Feel free to fix it whilst you're dealing with all the other problems that Lion has.
    ....sT

  • Re: Satellite Pro L500-1PU - internal microphone does not work

    I have an L500 -1PU Toshiba, running on 32 bit Windows 7,
    The webcam is working wonderfully but the internal microphone is not working properly.
    I had an external microphone so i hadn't noticed this problem when i got on skype, but i've recently discovered that when using the webcam the person on the other end can hear faint noises from my computer when i'm playing music or watching a video clip.
    How can i solve this and get my microphone working properly such that i can control the volume and actually get full service from my otherwise decent notebook?
    Thanks

    Hi
    Possibly this Toshiba FAQ could help you:
    +Whistling sound on the Satellite L500+
    http://aps2.toshiba-tro.de/kb0/TSB0402UB0001R01.htm
    Its a matter of the settings.
    This issue occurs if the microphone volume in the speakers properties is enabled.
    After disabling this point the issue with acoustic feedback does not appear anymore.
    Hope this helps!

  • Speakers and microphone are not working

    suddenly, speakers, headphones and the microphone are not working...
    i tried updating the driver but it didn't work and when i try to test it through propertise i get an error message " failed to play test tone"
    what should i do?
    product: dv6-1350us
    product number: VM219UA#ABA
    win. 7 64-bit

    Hi eslam-hussien,
    Welcome to the HP Support Forums! 
    I can understand how frustrating it must be to have lost the sound from your speakers, headphones and the microphone has stopped working as well. I will try my best to help you with this.
    In this document for Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices are steps for resolving this issue. 
    I hope this information helps, please let me know how it goes.
    Thank you and good luck!
    I worked on behalf of HP.

  • My microphone does not work. pavillion dv7-1129wm running windos7

    Please friends I need help my microphone does not work since installing windos 7, andreinstalled the sound and nothing and download the codes and nothing, not what else to do .... I need your help thanks.

    I don't know if this is related: [http://discussions.apple.com/thread.jspa?threadID=2160988&tstart=660]
    It's a Skype problem. The program automatically selects the DIGITAL input. You need to change it to the RealTex internal microphone.
    From Skype, go into Tools -> Options -> Audio Settings and make sure the microphone is selected instead of the digital input.
    I think it would also help to verify the microphone is working at all. I don't have experience with external microphones so you'll have to wait for other suggestions as to that, unless you can do it yourself.

  • [XP64] Microphone does not work in WinXP 64

    Hi,In Windows XP 64bit my microphone does not work, tried it in Ventrilo 2., Skype and even in the Windows Recorder. The computer don't detect any sound. Offcourse?I have selected the microphone in the recordering section in the Windows volume panel and the volume at maxium. Also in the volume panel under playback the microphone is not mute, set to max volume. I have also installed WinXP 32bits and here it works OK with exactly the same settings. Thats why I think it is because of my Soundcard driver, I have installed the latest driver from this site. I have a SoundBlaster X-Fi Fatality. Is there anyone with a X-Fi soundcard with the same problem or anyone where the microphone works in WinXP 64bit's Or is it a known problem?Please help me

    Hi Theicewarrior,?Creative support has been aware of this issue for quite some time (6+ months, maybe even a year). The 4GB+?RAM driver/addressing issues are not a priority or they would have been addressed quite some time ago.
    Presumably this is due to functional Vista drivers for the masses being a higher priority than the relati'vely few of us with 4GB+ RAM and an X-Fi.
    While the X-Fi?is a great card, my only wish was that the vendor was forthright about this product not functioning with certain configurations. It is my feeling that?making an effort to help?customers choose?products that will work with their configurations would result in satisfied and repeat customers?and a better bottom line?as opposed to?eeking a few extra dollars out of a slightly larger customer base and?who are then left unsatisfied with a product and unwilling to buy a company's products in the future.Message Edited by Foddan on 07-9-20070:45 AM

  • My microphone does not work on calls on my iPhone 4

    Don't ask me what has happened and I have been through all of the troubleshooting that I can on my own. 
    I have no clue how to get a hold of a LIVE AT&T person or APPLE person.
    The problem is my microphone does not work when I use the telephone, whether I make the call or someone calls me.  It is NOT the MUTE button.  And yes, I have already rebooted my iPhone about 5 times now.  Has not fixed it either.
    But the microphone DOES work as I was able to record a new voicemail greeting to let people know my phone isn't working.
    So, they could call me all day long but they won't hear me, so who do I call using my landline (thankfully I kept it).
    It is the day after Thanksgiving and I would be a fool to head over to the Apple Store or the AT&T Store....
    Thank-you,
    Marcia

    Try disconnecting the headphones and then adjusting the volume, does it say headphones?
    There might be something in the headphone jack, maybe lint, dirt, or something else in there.
    Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

  • My microphone is not working on my IPAD 4... It's version is 7.0.4. Please help me coz i cant my sister in HK can't hear me on skype. It's our only way of keeping in touch. Im so helpless. Please help me. Thank u and God bless everyone.

    My microphone is not working on my IPAD 4... I can't figure out if the problem has something to do when i updated the version. It's version is 7.0.4. Please help me coz i cant my sister in HK can't hear me on skype. It's our only way of keeping in touch. Im so helpless. Please help me. Thank u and God bless everyone.

    Have you tried reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Microphone does not work after restarting computer

    I just received the Creative Xmod soundcard yesterday after using an Icemat siberia usb headset sound card for a couple months. The sound is a lot better with the creative soundcard however, if I restart my computer and go back into ventrilo, my microphone does not work. It doesnt make any sound when I talk into it (almost as if it muted itself) but it hasnt. I check my sound settings and everything is the way it should be.....but the mic isnt producing any sound. It is not my headphones that is causing the problem because I have never had this problem with my old icemat soundcard. I am currently using :
    Sennheiser PC350 headset
    Windows XP Home Edition
    The newest version of Ventrilo

    http://picsend.net/images/240403ventsetup.JPG
    That is how I have ventrilo setup. A friend of mine said I should Mux set to Record Control, but it only gives me the option for Wave In =/

  • I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) and now my microphone is not working

    I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) 3 days ago, I had a terrible experience as the genious who gave me my solid state disk for safekeeping lost my disk's brackets thus I had to wait 2 more hours until they find one after 10 days of waiting for the repair. I noticed some weird sounds, like somehting is moving with the mac 1-2 times, even if I have no mechanical parts other than the fans, but my real issue at the moment is that my microphone is not working. I can see the mic in the System Info however and in Audio Midi Setup. In the Audio Midi Setup I see that the master chanel is turned off and I can't turn in on. Ch 1 and 2 are on full. I also noticed the first seconds after the comp. boots the blue bar goes to the middle in the System Preferences -> Sound -> Input. Any ideas what to do or try? I do not want to go back to the apple store as it is 50 minutes away from here and I need my laptop as a computer science student. Everything else is working perfectly.

    You need to call both the store that did the repair and Apple directly, warranty service or Apple care, and report this problem with both of them and get a ticket number of some kind (some kind of verification number) that the unit just came back from major service with this problem and that you want it fixed when you can lose the use of it, which is not right now.
    Without doing something like that they could easily say it is damage not covered under the normal warranty.
    God knows what the repair center did and did not do to it while it was there.
    And depending on when you actually bought it the warranty could run out in the mean time.

Maybe you are looking for

  • Goods posting without PO

    Dear All, In our company client requires a goods receipt (with RF scanner ) for Non PO. It means material unknown, vendor unknow but still he want goods receipt How can we map in SAP Regards subhash

  • How to do Front End Validation for JSP Forms using Java Script with 9iJD...

    How to do Front End validation using 9iJD. Any wizard is there. We need to do the val. using Java Script. If its not available, please include that in the Production Release.

  • Oracle Database 10g Release 1 (10.1.0.2) for Microsoft Windows (32-bit)

    During the Database Confiugration Assistant step of the install of the unzipped 10g_win32_zip file the error message " ORA-28547 connection to server failed, probable Net8 admin error ". If Ignore is used many of these will appear and then at the end

  • Media manager shifts timecode on long clip copies

    We make sub clips from an hour long show daily, then consolidate these sub clips using media manager to be their own master clips. Then we(theoretically) delete the entire hour show and work only with the clips we want. This has been working great fo

  • Problems with IPhone 5 and File Sharing with ITunes

    I am using an app that let's you create ringtones. Once created you are supposed to be able to see the songs in the file sharing part of the apps tab on IPhone device on ITunes. However, I can't scroll down to see my files. I can see the part that sa