External MOH for unified CME 4.0?

External MOH is now possible using an E&M interface in CME, according to the documentation. Has anyone tried this? What did you use for an MOH source? I understand such a source would not currently be supported, but....

The current capabilities and features of MoH include:
MoH multicast and unicast streaming service
Music streaming service for "user" hold and "network" hold
51 sources per media convergence server (MCS)
Fifty continuously looping .wav file sources
One real-time streaming source
Each source configurable as either unicast or multi-cast stream
Support for audio streaming to selected devices
Gateways (multicast only):
DT-24+?No
6608?Not until Seaview 3.3
VG200 (H.323)?Yes with Cisco IOS? Software Release 12.2(11)T and later, enable the ccm-manager music-on-hold command
VG200 (MGCP)?Yes, same as VG200 (H.323)
VG248?Yes
Gateways (unicast only)?AT-2/-4/-8, AS-2/-4/-8, and all other Cisco IOS? VoIP gateways, including Cisco 1750, 2600/3600, 5300, 58xx, and 72xx
Cisco IP phones (unicast, multicast)?7910, 7940, and 7960
Cisco IP phones (unicast only)?Cisco 7935, 12 SP+, and 30 VIP phones
Cisco IP SoftPhone (unicast only)
Maximum 250 simultaneous on-hold streaming sessions per server
Multiple server instances for application scalability
Multiple server instances for server load balancing and redundancy
G.711, G.729A, and wide-band audio codec support
Off-line audio translation utility

Similar Messages

  • Different MOH for Internal and External Calls

    Is it possible to have a different MOH source for internal vs external calls.
    I know that Network MOH is for transfering but can this be used for external MOH source from the PSTN?

    There's really no way to do this easily. The issue is that the call to a PSTN phone would flow through a gateway and if an IP phone put this call on hold, then the Audio Source configured on the IP phone would determine the MoH file/source and the MRGL of the gateway would determine which MoH server it actually came from. As a result, there's really no way that the IP phone placing the call on hold could specify a different audio source for an internal call (to another IP phone) because even if the other phone has a different MRGL (and therefore a different MoH server), the MoH audio source will be the same

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • Can not select external input for sound

    can not select external input for sound

    Hey there RoosterMonkey,
    It sounds like you have Soundtrack Pro installed but you cannot select your external audio device as an input. I recommend the troubleshooting steps from the article named:
    Soundtrack Pro 3: Troubleshooting Basics
    http://support.apple.com/kb/ht3659
    Update to the latest software versions
    From the Apple () menu, choose Software Update and make sure that you have the most recent updates for your versions of Soundtrack Pro 3, QuickTime, Compressor, Pro Application Support, and other important system files. Installing the latest updates ensures that your software has the latest improvements and enhancements.
    Note: Be sure the application is in the Applications folder and is named Soundtrack Pro before running Software Update.
    Check compatibility and driver versions for third-party devices
    If you're using a third-party sound card, MIDI interface, storage system, control surface, or plug-in, check the support area on the manufacturer's website to be sure that you're using the latest version of the relevant driver or other software for your product. For information on troubleshooting possible issues with Audio Unit plug-ins, go to Soundtrack Pro 3: Troubleshooting Audio Unit plug-in issues.
    Try a different Multitrack Project or Audio File Project
    Sometimes project files can become damaged, causing unexpected behavior in Soundtrack Pro. To create a fresh project, choose File, then New and select Multitrack Project or Audio File. Test to see if the issue is resolved in the new project.
    Delete the User Preferences
    You can resolve many issues by restoring Soundtrack Pro to its original settings. This will not impact your project files. To reset your Soundtrack Pro user preference settings to their original state:
    Quit Soundtrack Pro if it is open.
    In the Finder, choose Go > Go to Folder from the menu bar.
    Type ~/Library/Preferences  in the "Go to the folder" field.
    Remove the "com.apple.soundtrackpro.plist" file from the Preferences folder.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Application Support/Soundtrack Pro  in the "Go to the folder" field.
    Remove the "EffectsCache.plist" file from the Soundtrack Pro folder.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Application Support/Soundtrack Pro/Layouts  in the "Go to folder" field.
    Remove the "Soundtrack Pro.saved.moduleLayout" file from the Layouts folder.
    In the Finder, choose Go > Go to Folder from the menu.
    Type ~/Library/Caches in the "Go to folder" field.
    Remove the "com.apple.audiounits.cache" from the Caches folder.
    Remove receipts and reinstall Soundtrack Pro 3 and Compressor
    Another approach you might consider is reinstalling Soundtrack Pro and Compressor. To do this effectively, you need to remove the applications and their receipts, then install Soundtrack Pro and use Software Update to install additional updates. Compressor gets installed automatically when you install Soundtrack Pro. You don't have to remove everything that was installed with Soundtrack Pro, so follow the steps below to completely reinstall a fresh copy of Soundtrack Pro. Note: Make sure that you have your installation discs handy before beginning.
    In Mac OS X v10.6 Snow Leopard or OS X Lion
    Open the Terminal application and enter the following commands one at a time and an administrator password when prompted. Note: The commands are case sensitive.
    sudo pkgutil --forget com.apple.pkg.Compressor
    sudo pkgutil --forget com.apple.pkg.Qmaster
    sudo pkgutil --forget com.apple.pkg.VideoOutSupport
    sudo pkgutil --forget com.apple.pkg.PSTSharedA
    sudo pkgutil --forget com.apple.pkg.AppleHDVCodec
    sudo pkgutil --forget com.apple.pkg.AppleIntermediateCodec
    sudo pkgutil --forget com.apple.pkg.DSPPublishing
    sudo pkgutil --forget com.apple.pkg.SoundtrackPro
    sudo pkgutil --forget com.apple.pkg.Uncompressed422
    Then, reinstall Soundtrack Pro and Compressor using the following steps:
    Open the Applications folder. Drag the Soundtrack Pro and Compressor applications to the Trash.
    Insert your Logic Studio or Final Cut Studio installation disc and install Soundtrack Pro.
    When finished installing, choose the Apple () menu, then Software Update to update your software to the latest version.
    Open Soundtrack Pro to verify that the issue has been resolved.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Error in registering a provider for External Application for Web Clipping

    Getting Error: The provider URL specified may be wrong or the provider is not running. (WWC-43176)
    when trying to register a provider for an external application for Web Clipping

    Hi Vineet,
    The admins applied a patch to my version of the OracleAS 10g Version 9.0.4. and now I able to register a provider with the same URL but different Provider Name. I added My Yahoo Web Clipping from the Portlet Staging Area. That works fine but when I click on the check mail link in the Web Clipping Studio it gives me the following error. I have tried several times and I get the same error....
    An exception has occured : WCS-514 -- Get status code 403 to URL http://us.rd.yahoo.com/my/prop/mail/*http://mail.yahoo.com/ by method get
    Please click "Cancel" or "Back" in the above panel (if present) to retry. Otherwise, please try to click "Back" (from the browser) to go back to the Oracle Portal page to restart.

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

  • Using iMac (Target Display Mode) as an External Display for MacBook Air

    I have a Mid 2010 iMac with a 2 thunderbolt ports. I now have a brand new MacBook Air (2012 Core i5 1.8GHz with 8GB RAM) with a thunderbolt port. I have a Belkin Mini Displayport Cable to connect the two. I want to use the iMac as an external monitor for the MacBook Air. I cannot seem to get this to work. Can I do this? Do I have the right cable?

    You can do it but you need a thunderbolt cable to connect the two.  Then just hit CMD F2 on the iMac and it will enter Target Display Mode.

  • I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

    I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

    In addition to pixel density, you are up against the translation driver card in the TV.
    If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page.  At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
    Mac falls into the top 25% of the page, maxing out at 1366x768 often.  This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
    I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector.  Computer monitor first, TV second.  But the thing is only 27 in.  Good thing TV is not as important to me as it is to others.

  • Can i choose the resolution of my external display for when the lid is closed when my lid is open

    When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

    Hi there, I had a similar problem and was unable to resolve it.  I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck.  It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
    My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

  • Imac as external monitor for windows Notebook

    Hi,
    I want to switch from my Windows Pc to a mac for private use.
    I prefer the new iMac (2011) 21,5" but I could not get an definite answer (not even in my local apple store) if it is possible to connect an existing Notebook (with VGA Mini-d-sub or DVI connector) to the new iMac in order to use the iMac as an external monitor for the Notebook.
    I definitely need this for my business work in my home-office so this information is vital.
    If ist is not possible I have to take the macMini and stay with my standard monitor.
    Can please someone tell me if it is possible at all and if so, how it can be done.
    I searched the internet and only found out that it was possible with the older 27" model but no information for the 2011 21,5" so please help!
    Thank you in advance for your Support.
    Celindir

    Hi,
    Sorry to say, but ...
    The 2011 iMacs (21.5" and 27") can only be used as a second display via a Thunderbolt-to-Thunderbolt cable.
    The 2009 and 2010 27" iMacs can be used as a second display via a DisplayPort connection.
    http://support.apple.com/kb/TS3775 andhttp://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Stefan

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • Can i use my 21.5" imac as an external monitor for my macbook pro?

    I have a 21.5" iMac (with Intel processor) that I'm trying to use an external monitor for a new Macbook Pro.  Both machines have a thunderbolt input.  I bought a Belkin mini displayport to mini displayport connector, but my macbook is not displaying on the iMac.  I saw videos online showing this done with the 27" iMac, saying you just needed to press Command+F2, but that is not working for me.  I can't seem to find any posts confiming if I can use my 21.5" iMac this way though.

    https://discussions.apple.com/thread/4082303?start=0&tstart=0

  • My 320GB external drive for Time Machine now only has enough capacity to keep a backup of one day. All my other backups are gone.  What can I do to fix this situation?

    I've been using a 320GB external drive for time machine for the last several years.  The backups always worked fine and when necessary I was able to look at & restore older data from the time capsule.  Recently, I keep getting the message that a backup cannot be completed and an older backup will be deleted. Usually this wasn't an issue because I still had several months of information on disk.  Now a one-time backup takes up 315GB and therefore I only have a backup of the previous day.  I don't understand this because I thought that the backup only saves information that has changed and doesn't copy everything everytime.  What do I need to do to get my backups to a reasonable size so that I can keep at least 1 month data stored on it.?  Please don't tell me I need a larger drive ... that would be too easy. 

    Get a larger drive for your TM backups.
    The recommended size is 3 times what you are backup. So if 315 GB is a backup then you need a 1 TB drive.
    Allan

  • Generate Prime Interface Availability and Utilization Report for unified APs

    Hi,
    I´m trying to generate interface availability and interface utilization report for unified APs on Prime Infrastructure 2.0, but it doesn´t display any information. I have created device health and interface health templates under desing/Monitor configuration/My templates and deployed under Deploy/Monitoring deployment, but it still don´t show any information,
    thaks for your help.

    Hi Alejandro,
    Did you solve this problem? Or is it a bug?
    I face the some issue with you, I just run "Report/Report Launch Pad/Deivce/Interface Utilization"
    and then I create a report for interface utilization.
    But it display nothing when the report run finished.
    I ask some guys in this forum, they said maybe it's a PI2.1 bug.
    BR
    Frank

  • Is there a way to update an external dictionary for services without migrating the services

    Is there a way to update an external dictionary for services without migrating the services
    Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary.  I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
    Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
    If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?

    dont think so but I could be wrong
    as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers  but there
    are times when I use headset so I bought this one
    or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
    http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

Maybe you are looking for