External Monitor Calibration Error

Hi everyone,
I have a MacBook Pro 15 connected to a LaCie 321 display via the MiniPort to DVI adapter. When I try to calibrate using the LaCie Blue eye Pro I get an error message. I've been told by LaCie supoprt that the display needs to be conected directly to a DVI port. Connecting it to the thundebolt port with the MiniPort adapter, which they say is a DVI emulator, is what is casuing the error. Indicating that it can't properly transfer the required data from the thunderbolt port to the display. 
Anyone else had a simliar issue with using the MiniPort to DVI adapter and using a calibration tool?
Thanks!

I have no idea exactly how the OS uses these "overrides," but FYI I have 88 of them for vendor ID 610, & my iMac has never had any OS installed other than Tiger. Opening a few with Property List Editor reveals each has a "DisplayProductName" property it appears is associated with the name of a display product, most of which are Apple displays, like Apple Studio Display or iMac.
From this I assume vendor 610 is Apple, & these are settings it supplies for various display products with the OS, mostly for its own display products but perhaps also for generic display types like "LCD." How this relates to factory profiles is unclear: perhaps these are default settings used to generate a profile when a matching display is detected.
FWIW, all of the overrides have creation/modification dates of Jan 22, 2006. If memory serves, this is indicative of one of the OS version updates I think mentioned something about improvements to ColorSync, maybe 10.4.2 (?).
Anyway, I'm guessing that unless one of these files relates to Acer product ID info somehow, it won't help to move them into the new system folder, but I have no way to know if one does. I do know that by around 1997 or so, most displays had built-in 'smart' capabilities to communicate info about their vendor, resolution, & similar parameters to PC's & that OS X supports this standard. It might help to know what System Profiler says about your connected displays, which would indicate if it is being detected properly.
I'm sorry I can't give you a better answer but hopefully this info will help you gain some insight & lead to a good one.
Good luck!

Similar Messages

  • Satellite Pro U300: DVD issue - error: cannot output to external monitor

    Hi,
    I was having problems playing a dvd on my U300.
    Basically the software would load but when I tried to play the dvd it said "cannot output to external monitor".
    Having gone through all options I could not find anything to stop this happening. I then downloaded the latest software from the toshiba site.
    dvdpl-20070807102909.zip
    I resintalled this but got the same error message.
    I then uninstalled the software and tried to reinstall but now it just produces an error mesaage saying it cannot intsall the software on this computer.
    How can I reinstall this?
    Regards,
    Mark

    I presume you have received the Toshiba Recovery CD. Am I right?
    On this CD you can find the Toshiba image file. This image contains the Vista OS, Toshiba drivers, tools and additional software.
    But note; you cannot install only a single program. To reinstall a application from the Recovery CD you have to format the HDD and have to reinstall the whole OS using the Recovery CD.
    As Gipsyman said, the Toshiba driver page contains update and the original preinstalled software is needed.

  • MacAir not detecting external monitor. 'check signal cable' error

    Brand new MacAir OX 10.7.4 not detecting samsung external monitor. I keep getting 'check signal cable' error on a blank screen.

    Hi Walter,
    I'm not sure this'll fix your problem, & it's info from earlier OSX versions, but I'll toss it out...
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
    Trash these files...
    /Users/YourUserName/Library/Preferences/ByHost /com.apple.windowserver.<12digitHex#>.plist
    /Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist
    There may be more than one of each of the above, then trash...
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    Reboot
    You could test it by first, depending on OS version...
    To find out if it's system wide or user specific, try this...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    Does it work in the new account?
    To find out if it's system wide or user specific, try this...
    Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    Does it work in the new account?

  • I now get a external monitor error after a year

    I have been using an external lcd monitor for about a year and this week I started getting an error after I plugged it in for a while. It would work for 1-4 hours and then the external monitor would say that the frequency was not supported. At this point my MB would freeze and when I tried to restart it, it would not turn back on. The AC cord was plugged in, so the only thing I could do was remove the battery for a couple of minutes and restart.
    Each time I plugged the external monitor in it would work for a bit and then freeze again. I tried a different monitor and it froze as well and gave me the error box "optimal resolution is 900x1440 60mz. I tried again and made sure it was detecting the correct monitor in system preferences and that they matched the recommended specs, everything was correct.
    ANY IDEAS?
    I don't know what to try, like I said it worked for a whole year without any problems. And my 1 year warranty expired 9 days ago.
    I would love some ideas, Thank you!

    Hi frogjet,
    Are you connecting over VGA or DVI? I take it you're using the same Apple adapter that you've had for a while? What was the other monitor that also didn't work? Was it also the same connection type?
    It's probably worth bringing the computer and the monitor into an Apple Retail Store and having them have a quick look. I think the only problem, is that if it takes 1-4 hours to occur, a GB appointment is only 15-20 minutes long.
    Can you maybe grab a screen shot when the issue occurs?

  • Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

    Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?

    Your factory-supplied monitor profile, associated with your monitor by the operating system, is bad.  It's more common than you'd think.
    To avert the error:
    Open the Color Management panel of your Windows operating system.  In the Devices tab, if it is not already listed [ Add... ] the sRGB IEC61966-2.1 profile and [ Set as default Profile ].
    After doing the above, log out of Windows and back in again, just to ensure everything's updated.
    Note that the above assumes your monitor is more or less displaying color in the sRGB color space (sRGB is short for sRGB IEC61966-2.1).  For many monitors this isn't a terribly wrong assumption.
    If you want to ensure you have the most accurate color, consider buying a calibration and profiling device, which (with its associated software) can set your calibration and generate custom color profiles by doing actual measurements from your monitor.  You'll want to take some time to get your mind around how color-management works, and that is not a trivial task.  It's certainly well beyond what can be taught in a forum post by post.
    Good luck.
    -Noel

  • OS 10.6.8, Macbook Pro 3.1 error when saving monitor calibration, cannot save.

    Macbook pro 3.1 OS 10.6.8, error when saving monitor calibration profile.  Tried to name new profile, or save as an older profile, still got error when attempting to save.

    Try a NVRAM reset, and then go through the monitor calibration again.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the third time.
    Release the keys.

  • Calibrating an external monitor

    This is an obscure question, but I'm hoping at least one person on these forums has some advice:
    I'm trying to calibrate my external monitor (NEC LCD2690wuxi2) from my Macbook Pro (10.5.6) using Spectraview II software and a Gretag-Macbeth colorimeter, however the software cannot communicate with the monitor. My guess is that it has something to do with the Apple's new proprietary display port, and I'm wondering if any graphically-inclined users have found a workaround for this yet. Surely I'm not the only person here who does color critical work and can't get their laptop and display to interface.
    I do not have the flickering problem some other users have reported. Still, it defeats the purpose of buying the laptop in the first place if I can't get accurate colors.
    Any help is appreciated!

    Hey there. I have no issues with calibration. I use a Spyder3Pro through Mini-DVI adapter to calibrate my NEC 20WMGX2(even using it through a KVM). It calibrates whatever display you choose. Your software could be broken with 10.5.6. See if they have an update on their site. Try a different USB port or reinstall the software. The mini display port has played no issue in my display connections or regular usage.

  • T61 and the Intel Graphics Card error - external monitor not detected

    T61 with Vista 32 bit, Mobile Intel® GM965 Express Chipset and an Advanced Mini Dock.
    I am trying to use the DVI port and an external monitor. The driver does not detect the external monitor.
    Uninstalling the Intel driver the Generic profile will work on the external monitor, but is overly fuzzy, how do I get the T61 to recognize my external monitor with the right drivers?
    I am currently running the Intel Driver Ver. - 7.14.10.1329, which provides the message under Multiple Display:
    Two displays must be connected to the computer before you can use this feature. Please connect another display.
    Of course my 22" monitor is connected.  That is the frustrating part.  I have also uninstalled Presentation Director, just in case, but then re-installed after it seemed that wasn't the problem.
    There is a newer driver from Intel but it is not Lenovo approved yet I guess. Though I highly doubt this is the problem. What can I do?
    ~~
    I did post a thread on the thinkpads.com too, but so far haven't had any luck.

    Well the new dock came but didn't fix the problem.  Now my nice new T61 is packed up in a depot box, waiting for DHL to come pick it up.
    dkaufman1 -- I guess we do have different problems.  If I set my T61 to display to the DVI port in the bios I get a blank screens on both the DVI connectd monitor and the laptop screen until the OS boots when I have the laptop in the dock.  The only way I can see the bios screen to set it back to the ThinkPad LCD setting is to boot it disconnected from the dock.
    I really hope that this problem is resolved, as I really like the T61 otherwise.  I was even using it with the VGA cable connected to my 22" monitor, but it was pretty hard to take.   I'm now back to my old desktop hooked up to the same monitor via DVI and it is quite the relief, even if it isn't as zippy as the T61.

  • External Monitor on MBP (Invalid format error)

    I searched the forums and couldn't find a similar issue so here goes. I have a late 2008 MBP with Snow Leopard connected to a Vizio(MODEL#VM230XVT)LCD 1080P HDTV. I'm trying to use this in "closed lid" mode and using Apple Bluetooth mouse/KB. Because, I didn't want to buy another HDMI cable I currently have it connected via VGA with Apple adapter (DVI>VGA) and a separate audio cable running to TV I have the Bluetooth settings set to wake the device. when I shut the lid the screen goes black either states "No Signal" or "Invalid Format". I have to disconnect the external monitor in order to see the MBP screen again I have tried using several different types of Resolution without success. I notice under the resolution settings it has a "useable screen size underneath it with certain dimensions" so if I set my MBP to max resolution I believe 1400x900 (guesstimate) and set my HDTV to 1920x1080 I think underneath the resolution box I get the "useable screen dimensions which are usually the laptops screen dimension" not sure if this plays apart in anything just wanted to mention it. The TV will display if I leave the lid open on the MBP and have a resolution that exceeds 1024x768 so I'm not sure why it won't display with lid closed as well. Any suggestions would be appreciated.

    Then I'd…
    1) Try reinstalling WoW and try to keep as few preference/game files as you can. Granted you need to keep your character and game play files etc etc so just backup the lot and restore as required.
    2) Contact Blizzard and check their forums and see if they know anything about this.

  • Occasional graphics errors on external monitor

    Overall, I'm pretty happy with Lion. Occasionally however, I have video graphics glitches on my MacBook Pro. Sometimes it happens when using an external monitor, sometimes it also happens on the notebook display.
    I often get a distorted task switcher:
    Also, Safari sometimes renders the content in a weird way, with yellow and red blocks:
    And finally, the translucent part of the taskbar sometimes looks funny, with stray pixels running through:
    I wanted to mention that it's not a big concern, but when typing the previous version of this message, I detached the external monitor and then all I got was a black screen when opening the lid. I had to power down the MacBook.
    Anyone else seen this behaviour?

    Replying to my own question...
    There's a much longer-running thread (since Nov. 30th, 2011) here, about this issue. Apparently, I'm not the only one.
    https://discussions.apple.com/message/16881510#16881510

  • HP Zbook 15, external monitor connected to docking station issue

    Dear all
    I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station. 
    After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
    "If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
    Best regards,
    Murtaza
    I did not find a way to attach the log file, so I put it here:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
    [ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
    [ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
    [ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
    [ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
    [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
    [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
    [ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
    [ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
    [ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
    [ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
    [ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
    [ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
    [ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
    [ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
    [ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x449fffff] page 2M
    [ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
    [ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
    [ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
    [ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
    [ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
    [ 0.000000] ACPI: FACS 0000000045e31000 000040
    [ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
    [ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
    [ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
    [ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
    [ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
    [ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
    [ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
    [ 0.000000] On node 0 totalpages: 4143388
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 4334 pages used for memmap
    [ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
    [ 0.000000] Normal zone: 60344 pages used for memmap
    [ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
    [ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
    [ 0.000000] Offload RCU callbacks from all CPUs
    [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
    [ 0.000000] NR_IRQS:16640 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 66584576 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration failed
    [ 0.008000] tsc: PIT calibration matches HPET. 1 loops
    [ 0.008000] tsc: Detected 2693.754 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000024] Security Framework initialized
    [ 0.000038] AppArmor: AppArmor initialized
    [ 0.000039] Yama: becoming mindful.
    [ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.004573] Initializing cgroup subsys memory
    [ 0.004578] Initializing cgroup subsys devices
    [ 0.004579] Initializing cgroup subsys freezer
    [ 0.004581] Initializing cgroup subsys blkio
    [ 0.004582] Initializing cgroup subsys perf_event
    [ 0.004584] Initializing cgroup subsys hugetlb
    [ 0.004602] CPU: Physical Processor ID: 0
    [ 0.004603] CPU: Processor Core ID: 0
    [ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.005456] mce: CPU supports 9 MCE banks
    [ 0.005469] CPU0: Thermal monitoring enabled (TM1)
    [ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    [ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    [ 0.005479] tlb_flushall_shift: 6
    [ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
    [ 0.006826] ACPI: Core revision 20131115
    [ 0.015427] ACPI: All ACPI Tables successfully acquired
    [ 0.015707] ftrace: allocating 31443 entries in 123 pages
    [ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.067065] TSC deadline timer enabled
    [ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.067078] ... version: 3
    [ 0.067079] ... bit width: 48
    [ 0.067079] ... generic registers: 4
    [ 0.067080] ... value mask: 0000ffffffffffff
    [ 0.067081] ... max period: 0000ffffffffffff
    [ 0.067082] ... fixed-purpose events: 3
    [ 0.067082] ... event mask: 000000070000000f
    [ 0.068367] x86: Booting SMP configuration:
    [ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    [ 0.166721] x86: Booted up 1 node, 8 CPUs
    [ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
    [ 0.174163] devtmpfs: initialized
    [ 0.177951] EVM: security.selinux
    [ 0.177953] EVM: security.SMACK64
    [ 0.177953] EVM: security.ima
    [ 0.177954] EVM: security.capability
    [ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
    [ 0.178592] pinctrl core: initialized pinctrl subsystem
    [ 0.178637] regulator-dummy: no parameters
    [ 0.178663] RTC time: 20:49:45, date: 04/17/15
    [ 0.178689] NET: Registered protocol family 16
    [ 0.178764] cpuidle: using governor ladder
    [ 0.178766] cpuidle: using governor menu
    [ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.178796] ACPI: bus type PCI registered
    [ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.194702] PCI: Using configuration type 1 for base access
    [ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.194963] mtrr: corrected configuration.
    [ 0.195520] bio: create slab <bio-0> at 0
    [ 0.195643] ACPI: Added _OSI(Module Device)
    [ 0.195645] ACPI: Added _OSI(Processor Device)
    [ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.246512] ACPI: Dynamic OEM Table Load:
    [ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
    [ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.250664] ACPI: Dynamic OEM Table Load:
    [ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
    [ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 0.254498] ACPI: Dynamic OEM Table Load:
    [ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
    [ 2.268291] ACPI: Interpreter enabled
    [ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 2.268314] ACPI: (supports S0 S3 S4 S5)
    [ 2.268315] ACPI: Using IOAPIC for interrupt routing
    [ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.268475] ACPI: No dock devices found.
    [ 2.270541] ACPI: Power Resource [APPR] (off)
    [ 2.287340] ACPI: Power Resource [COMP] (on)
    [ 2.287629] ACPI: Power Resource [LPP] (on)
    [ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 2.298295] PCI host bridge to bus 0000:00
    [ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
    [ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
    [ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
    [ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
    [ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
    [ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
    [ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
    [ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
    [ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
    [ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
    [ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
    [ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
    [ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
    [ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
    [ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
    [ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
    [ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
    [ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
    [ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
    [ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
    [ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
    [ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
    [ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
    [ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
    [ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
    [ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
    [ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
    [ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
    [ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
    [ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
    [ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
    [ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
    [ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
    [ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
    [ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
    [ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
    [ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.306776] acpiphp: Slot [1] registered
    [ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.306850] acpiphp: Slot [1-1] registered
    [ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
    [ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
    [ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
    [ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
    [ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
    [ 2.315269] pci 0000:5d:00.0: supports D1 D2
    [ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
    [ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
    [ 2.324298] Found 1 acpi root devices
    [ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
    [ 2.324522] vgaarb: loaded
    [ 2.324523] vgaarb: bridge control possible 0000:01:00.0
    [ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
    [ 2.324635] SCSI subsystem initialized
    [ 2.324664] libata version 3.00 loaded.
    [ 2.324678] ACPI: bus type USB registered
    [ 2.324688] usbcore: registered new interface driver usbfs
    [ 2.324693] usbcore: registered new interface driver hub
    [ 2.324707] usbcore: registered new device driver usb
    [ 2.324786] PCI: Using ACPI for IRQ routing
    [ 2.330294] PCI: pci_cache_line_size set to 64 bytes
    [ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
    [ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
    [ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
    [ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
    [ 2.330402] NetLabel: Initializing
    [ 2.330403] NetLabel: domain hash size = 128
    [ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
    [ 2.330412] NetLabel: unlabeled traffic allowed by default
    [ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 2.332489] Switched to clocksource hpet
    [ 2.335878] AppArmor: AppArmor Filesystem Enabled
    [ 2.335891] pnp: PnP ACPI init
    [ 2.335898] ACPI: bus type PNP registered
    [ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
    [ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336141] pnp 00:01: [dma 4]
    [ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
    [ 2.336353] system 00:06: [io 0xffff] has been reserved
    [ 2.336354] system 00:06: [io 0xffff] has been reserved
    [ 2.336355] system 00:06: [io 0xffff] has been reserved
    [ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
    [ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
    [ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
    [ 2.336939] pnp 00:0a: [dma 0 disabled]
    [ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
    [ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
    [ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
    [ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
    [ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 2.337398] pnp: PnP ACPI: found 15 devices
    [ 2.337399] ACPI: bus type PNP unregistered
    [ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
    [ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
    [ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
    [ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
    [ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
    [ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
    [ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
    [ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
    [ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
    [ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
    [ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
    [ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
    [ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
    [ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
    [ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
    [ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
    [ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
    [ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
    [ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
    [ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
    [ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
    [ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
    [ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
    [ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
    [ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
    [ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
    [ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
    [ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
    [ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
    [ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
    [ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
    [ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
    [ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
    [ 2.343341] NET: Registered protocol family 2
    [ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
    [ 2.343782] TCP: reno registered
    [ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 2.343907] NET: Registered protocol family 1
    [ 2.343916] pci 0000:00:02.0: Boot video device
    [ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
    [ 2.344387] PCI: CLS 64 bytes, default 64
    [ 2.344426] Trying to unpack rootfs image as initramfs...
    [ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
    [ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
    [ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
    [ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.581892] Scanning for low memory corruption every 60 seconds
    [ 2.582096] Initialise system trusted keyring
    [ 2.582129] audit: initializing netlink socket (disabled)
    [ 2.582137] type=2000 audit(1429303787.580:1): initialized
    [ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 2.606581] zbud: loaded
    [ 2.606685] VFS: Disk quotas dquot_6.5.2
    [ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 2.606997] fuse init (API version 7.22)
    [ 2.607048] msgmni has been set to 31698
    [ 2.607084] Key type big_key registered
    [ 2.607458] Key type asymmetric registered
    [ 2.607459] Asymmetric key parser 'x509' registered
    [ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 2.607514] io scheduler noop registered
    [ 2.607516] io scheduler deadline registered (default)
    [ 2.607531] io scheduler cfq registered
    [ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 2.608123] vesafb: scrolling: redraw
    [ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
    [ 2.763515] Console: switching to colour frame buffer device 240x67
    [ 2.917758] fb0: VESA VGA frame buffer device
    [ 2.917770] intel_idle: MWAIT substates: 0x42120
    [ 2.917771] intel_idle: v0.4 model 0x3C
    [ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 2.917911] ipmi message handler version 39.2
    [ 2.918057] ACPI: AC Adapter [AC] (on-line)
    [ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
    [ 2.918201] ACPI: Sleep Button [SLPB]
    [ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.918238] ACPI: Lid Switch [LID]
    [ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [ 2.918261] ACPI: Power Button [PWRF]
    [ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
    [ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
    [ 2.957440] ACPI: Invalid passive threshold
    [ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
    [ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
    [ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
    [ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
    [ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
    [ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
    [ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
    [ 3.003360] ACPI: Invalid passive threshold
    [ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
    [ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
    [ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
    [ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
    [ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
    [ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
    [ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
    [ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
    [ 3.013706] GHES: HEST is not enabled!
    [ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
    [ 3.056055] Linux agpgart interface v0.103
    [ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
    [ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
    [ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
    [ 3.353165] brd: module loaded
    [ 3.353594] loop: module loaded
    [ 3.353831] libphy: Fixed MDIO Bus: probed
    [ 3.353886] tun: Universal TUN/TAP device driver, 1.6
    [ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    [ 3.353914] PPP generic driver version 2.4.2
    [ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.353946] ehci-pci: EHCI PCI platform driver
    [ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
    [ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
    [ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.368161] usb usb1: Product: EHCI Host Controller
    [ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
    [ 3.368233] hub 1-0:1.0: USB hub found
    [ 3.368238] hub 1-0:1.0: 3 ports detected
    [ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
    [ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
    [ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384149] usb usb2: Product: EHCI Host Controller
    [ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
    [ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
    [ 3.384234] hub 2-0:1.0: USB hub found
    [ 3.384238] hub 2-0:1.0: 3 ports detected
    [ 3.384329] ehci-platform: EHCI generic platform driver
    [ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 3.384336] ohci-pci: OHCI PCI platform driver
    [ 3.384342] ohci-platform: OHCI generic platform driver
    [ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
    [ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
    [ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.384590] usb usb3: Product: xHCI Host Controller
    [ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
    [ 3.384673] hub 3-0:1.0: USB hub found
    [ 3.384690] hub 3-0:1.0: 15 ports detected
    [ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.385471] usb usb4: Product: xHCI Host Controller
    [ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
    [ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
    [ 3.385551] hub 4-0:1.0: USB hub found
    [ 3.385562] hub 4-0:1.0: 6 ports detected
    [ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
    [ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
    [ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 3.394254] mousedev: PS/2 mouse device common for all mice
    [ 3.394420] rtc_cmos 00:08: RTC can wake from S4
    [ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 3.394608] device-mapper: uevent: version 1.0.3
    [ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
    [ 3.394743] TCP: cubic registered
    [ 3.394800] NET: Registered protocol family 10
    [ 3.394914] NET: Registered protocol family 17
    [ 3.394922] Key type dns_resolver registered
    [ 3.395160] Loading compiled-in X.509 certificates
    [ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
    [ 3.395800] registered taskstats version 1
    [ 3.397885] Key type trusted registered
    [ 3.399811] Key type encrypted registered
    [ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
    [ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
    [ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
    [ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
    [ 3.460705] regulator-dummy: disabling
    [ 3.460903] Magic number: 11:175:852
    [ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
    [ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 3.462219] EDD information not available.
    [ 3.462247] PM: Hibernation image not present or could not be loaded.
    [ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
    [ 3.463165] Write protecting the kernel read-only data&colon; 12288k
    [ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
    [ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
    [ 3.478948] udevd[143]: starting version 175
    [ 3.509828] pps_core: LinuxPPS API ver. 1 registered
    [ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 3.511322] PTP clock support registered
    [ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
    [ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
    [ 3.513783] ahci 0000:00:1f.2: version 3.0
    [ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
    [ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 3.528600] scsi0 : ahci
    [ 3.528832] scsi1 : ahci
    [ 3.528908] scsi2 : ahci
    [ 3.528979] scsi3 : ahci
    [ 3.529074] scsi4 : ahci
    [ 3.529152] scsi5 : ahci
    [ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
    [ 3.529186] ata2: DUMMY
    [ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
    [ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
    [ 3.529192] ata5: DUMMY
    [ 3.529193] ata6: DUMMY
    [ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
    [ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
    [ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
    [ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
    [ 3.612547] usb 4-1: Product: USB5534
    [ 3.612548] usb 4-1: Manufacturer: SMSC
    [ 3.612549] usb 4-1: SerialNumber: 1239567
    [ 3.614189] hub 4-1:1.0: USB hub found
    [ 3.614228] hub 4-1:1.0: 4 ports detected
    [ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
    [ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
    [ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
    [ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
    [ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 3.849416] ata1.00: configured for UDMA/100
    [ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
    [ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
    [ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 3.856471] hub 1-1:1.0: USB hub found
    [ 3.856575] hub 1-1:1.0: 6 ports detected
    [ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
    [ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.100529] hub 2-1:1.0: USB hub found
    [ 4.100626] hub 2-1:1.0: 8 ports detected
    [ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
    [ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
    [ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
    [ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 4.284596] hub 3-1:1.0: USB hub found
    [ 4.284626] hub 3-1:1.0: 4 ports detected
    [ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
    [ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
    [ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
    [ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
    [ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
    [ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
    [ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
    [ 4.579770] Switched to clocksource tsc
    [ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
    [ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
    [ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
    [ 4.702997] EXT4-fs (sda5): recovery complete
    [ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
    [ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 4.736090] usb 3-7: Product: HP HD Webcam
    [ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
    [ 4.777998] random: init urandom read with 97 bits of entropy available
    [ 4.815946] init: ureadahead main process (382) terminated with status 5
    [ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
    [ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    [ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4.915232] udevd[465]: starting version 175
    [ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
    [ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
    [ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
    [ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
    [ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
    [ 4.941014] lp: driver loaded but no devices found
    [ 4.969070] Initializing HPQ6001 module
    [ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
    [ 4.977289] wmi: Mapper loaded
    [ 4.985916] [drm] Initialized drm 1.1.0 20060810
    [ 4.991703] hp_accel: laptop model unknown, using default axes configuration
    [ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
    [ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
    [ 5.013849] [drm] Memory usable by graphics device = 2048M
    [ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
    [ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 5.013874] Console: switching to colour dummy device 80x25
    [ 5.030434] random: nonblocking pool is initialized
    [ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.036770] ppdev: user-space parallel port driver
    [ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 5.039280] Copyright(c) 2003-2013 Intel Corporation
    [ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
    [ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
    [ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
    [ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
    [ 5.049977] Bluetooth: Core ver 2.17
    [ 5.049990] NET: Registered protocol family 31
    [ 5.049991] Bluetooth: HCI device and connection manager initialized
    [ 5.049998] Bluetooth: HCI socket layer initialized
    [ 5.050001] Bluetooth: L2CAP socket layer initialized
    [ 5.050005] Bluetooth: SCO socket layer initialized
    [ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [ 5.057904] Bluetooth: RFCOMM TTY layer initialized
    [ 5.057915] Bluetooth: RFCOMM socket layer initialized
    [ 5.057920] Bluetooth: RFCOMM ver 1.11
    [ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 5.061074] Bluetooth: BNEP filters: protocol multicast
    [ 5.061082] Bluetooth: BNEP socket layer initialized
    [ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
    [ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 5.063658] [drm] Driver supports precise vblank timestamp query.
    [ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
    [ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
    [ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
    [ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
    [ 5.107863] lp0: using parport0 (interrupt-driven).
    [ 5.117196] MXM: GUID detected in BIOS
    [ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
    [ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.136368] usbcore: registered new interface driver btusb
    [ 5.139414] init: failsafe main process (863) killed by TERM signal
    [ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
    [ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
    [ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
    [ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
    [ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 5.232078] hub 3-1.2:1.0: USB hub found
    [ 5.232107] hub 3-1.2:1.0: 2 ports detected
    [ 5.245239] Linux video capture interface: v2.00
    [ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
    [ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
    [ 5.258213] usbcore: registered new interface driver uvcvideo
    [ 5.258215] USB Video Class driver (1.1.1)
    [ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
    [ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.372070] lis3lv02d: 8 bits 3DC sensor found
    [ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 5.385320] fbcon: inteldrmfb (fb0) is primary device
    [ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
    [ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
    [ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
    [ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
    [ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
    [ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
    [ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
    [ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
    [ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
    [ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
    [ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
    [ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.672470] usbcore: registered new interface driver usbhid
    [ 5.672471] usbhid: USB HID core driver
    [ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
    [ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
    [ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
    [ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
    [ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
    [ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
    [ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
    [ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
    [ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
    [ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
    [ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 6.950914] Console: switching to colour frame buffer device 240x67
    [ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 6.954405] i915 0000:00:02.0: registered panic notifier
    [ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
    [ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
    [ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
    [ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
    [ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.960166] ACPI: If an ACPI driver is

    @emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
    Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
    I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
    That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
    Thanks for the input and links.

  • Libreoffice crashes after plug in external monitor

    Hi
    I have XFCE. When i plug in external monitor i get a crash from libreoffice. The message says that libreoffice has crashed and that documents will be saved. Has anybody got simillar issues?
    LibreOffice error message:
    Due to an unexpected errot, LibreOffice vrashed. All the files you were working on will be saved now. The next time LibreOffice is launched, your files will be recovered automatically.
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
    [ 0.000000] BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e1000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd80000 (usable)
    [ 0.000000] BIOS-e820: 000000007dd80000 - 000000007dd8f000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dd8f000 - 000000007dde0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007dde0000 - 000000007de00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed40000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: ASUSTeK Computer Inc. K50IJ /K50IJ , BIOS 209 07/10/2009
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7dd80 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
    [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 00c00000
    [ 0.000000] Base memory trampoline at [c0093000] 93000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
    [ 0.000000] RAMDISK: 7db5b000 - 7dd70000
    [ 0.000000] Allocated new RAMDISK: 375e9000 - 377fd327
    [ 0.000000] Move RAMDISK from 000000007db5b000 - 000000007dd6f326 to 375e9000 - 377fd326
    [ 0.000000] ACPI: RSDP 000f93d0 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 7dd80100 00084 (v01 071009 XSDT1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: FACP 7dd80290 000F4 (v03 071009 FACP1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 7dd80680 0CD1D (v01 K50IJ K50IJ209 00000209 INTL 20051117)
    [ 0.000000] ACPI: FACS 7dd8f000 00040
    [ 0.000000] ACPI: APIC 7dd80390 0005C (v01 071009 APIC1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 7dd80430 0003C (v01 071009 OEMMCFG 20090710 MSFT 00000097)
    [ 0.000000] ACPI: OEMX 7dd80470 00176 (v01 071009 OEMX1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: ECDT 7dd80620 00054 (v01 071009 OEMECDT 20090710 MSFT 00000097)
    [ 0.000000] ACPI: DBGP 7dd803f0 00034 (v01 071009 DBGP1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: BOOT 7dd805f0 00028 (v01 071009 BOOT1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 7dd8f040 00071 (v01 071009 OEMB1636 20090710 MSFT 00000097)
    [ 0.000000] ACPI: HPET 7dd8d3a0 00038 (v01 071009 OEMHPET 20090710 MSFT 00000097)
    [ 0.000000] ACPI: GSCI 7dd8f0c0 02024 (v01 071009 GMCHSCI 20090710 MSFT 00000097)
    [ 0.000000] ACPI: ATKG 7dd912f0 08024 (v01 022008 OEMATKG 20080220 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 7dd99b20 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMI detected: ASUS K50IJ
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1125MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007dd80
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x00000097
    [ 0.000000] 0: 0x00000100 -> 0x0007dd80
    [ 0.000000] On node 0 totalpages: 515335
    [ 0.000000] free_area_init_node: node 0, pgdat c05add00, node_mem_map f6628200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3943 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2252 pages used for memmap
    [ 0.000000] HighMem zone: 285878 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
    [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
    [ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 7de00000 (gap: 7de00000:80f20000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 u2097152
    [ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511307
    [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8247040 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dd80)
    [ 0.000000] Memory: 2027804k/2061824k available (3414k kernel code, 33536k reserved, 1408k data, 500k init, 1152520k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB)
    [ 0.000000] .data : 0xc04559d5 - 0xc05b5a00 (1408 kB)
    [ 0.000000] .text : 0xc0100000 - 0xc04559d5 (3414 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1795.332 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.27 BogoMIPS (lpj=5984440)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003394] Security Framework initialized
    [ 0.003400] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003424] Mount-cache hash table entries: 512
    [ 0.003645] Initializing cgroup subsys cpuacct
    [ 0.003661] Initializing cgroup subsys memory
    [ 0.003672] Initializing cgroup subsys devices
    [ 0.003674] Initializing cgroup subsys freezer
    [ 0.003677] Initializing cgroup subsys net_cls
    [ 0.003679] Initializing cgroup subsys blkio
    [ 0.003723] CPU: Physical Processor ID: 0
    [ 0.003725] CPU: Processor Core ID: 0
    [ 0.003728] mce: CPU supports 6 MCE banks
    [ 0.003736] CPU0: Thermal monitoring handled by SMI
    [ 0.003740] using mwait in idle threads.
    [ 0.006852] ACPI: Core revision 20110413
    [ 0.016682] ftrace: allocating 15362 entries in 31 pages
    [ 0.020055] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054743] CPU0: Intel Celeron(R) Dual-Core CPU T3000 @ 1.80GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073448] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100011] CPU 1 irqstacks, hard=f54e8000 soft=f54ea000
    [ 0.100014] Booting Node 0, Processors #1 Ok.
    [ 0.100017] smpboot cpu 1: start_ip = 93000
    [ 0.006666] Initializing CPU#1
    [ 0.006666] CPU1: Thermal monitoring handled by SMI
    [ 0.196686] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203328] Total of 2 processors activated (7184.88 BogoMIPS).
    [ 0.204206] devtmpfs: initialized
    [ 0.204206] PM: Registering ACPI NVS region at 7dd8f000 (331776 bytes)
    [ 0.204614] print_constraints: dummy:
    [ 0.204682] NET: Registered protocol family 16
    [ 0.204804] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204807] ACPI: bus type pci registered
    [ 0.204906] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.204910] PCI: not using MMCONFIG
    [ 0.205140] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
    [ 0.205142] PCI: Using configuration type 1 for base access
    [ 0.206964] bio: create slab <bio-0> at 0
    [ 0.206964] ACPI: Deleted _OSI(Windows 2009)
    [ 0.209160] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.209166] ACPI: EC: Look up EC in DSDT
    [ 0.218122] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.221024] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.230152] ACPI Warning: Incorrect checksum in table [ATKG] - 0x84, should be 0xE5 (20110413/tbutils-314)
    [ 0.230496] ACPI: SSDT 7dd993b0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.231045] ACPI: Dynamic OEM Table Load:
    [ 0.231049] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.231346] ACPI: SSDT 7dd99320 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    [ 0.231894] ACPI: Dynamic OEM Table Load:
    [ 0.231897] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
    [ 0.232248] ACPI: Interpreter enabled
    [ 0.232260] ACPI: (supports S0 S3 S4 S5)
    [ 0.232287] ACPI: Using IOAPIC for interrupt routing
    [ 0.232319] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.234032] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.234035] PCI: Using MMCONFIG for extended config space
    [ 0.243183] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
    [ 0.243546] ACPI: No dock devices found.
    [ 0.243548] HEST: Table not found.
    [ 0.243553] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.243848] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.244065] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.244068] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.244072] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.244075] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.244078] pci_root PNP0A08:00: host bridge window [mem 0x7de00000-0xffffffff]
    [ 0.244094] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.244121] DMAR: Forcing write-buffer flush capability
    [ 0.244147] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.244164] pci 0000:00:02.0: reg 10: [mem 0xfe400000-0xfe7fffff 64bit]
    [ 0.244174] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.244181] pci 0000:00:02.0: reg 20: [io 0xdc00-0xdc07]
    [ 0.244219] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.244232] pci 0000:00:02.1: reg 10: [mem 0xfe800000-0xfe8fffff 64bit]
    [ 0.244330] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.244399] pci 0000:00:1a.0: reg 20: [io 0xd880-0xd89f]
    [ 0.244468] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
    [ 0.244535] pci 0000:00:1a.1: reg 20: [io 0xd800-0xd81f]
    [ 0.244604] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
    [ 0.244672] pci 0000:00:1a.2: reg 20: [io 0xd480-0xd49f]
    [ 0.244753] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.244784] pci 0000:00:1a.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
    [ 0.244890] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.244896] pci 0000:00:1a.7: PME# disabled
    [ 0.244932] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.244957] pci 0000:00:1b.0: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
    [ 0.245049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.245054] pci 0000:00:1b.0: PME# disabled
    [ 0.245086] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.245179] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.245185] pci 0000:00:1c.0: PME# disabled
    [ 0.245218] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
    [ 0.245311] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.245317] pci 0000:00:1c.1: PME# disabled
    [ 0.245356] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
    [ 0.245451] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.245457] pci 0000:00:1c.5: PME# disabled
    [ 0.245494] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.245563] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
    [ 0.245634] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.245702] pci 0000:00:1d.1: reg 20: [io 0xd080-0xd09f]
    [ 0.245771] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.245839] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
    [ 0.245920] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.245951] pci 0000:00:1d.7: reg 10: [mem 0xfe9fb800-0xfe9fbbff]
    [ 0.246056] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.246062] pci 0000:00:1d.7: PME# disabled
    [ 0.246091] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.246183] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
    [ 0.246345] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.246377] pci 0000:00:1f.2: reg 10: [io 0xcc00-0xcc07]
    [ 0.246390] pci 0000:00:1f.2: reg 14: [io 0xc880-0xc883]
    [ 0.246404] pci 0000:00:1f.2: reg 18: [io 0xc800-0xc807]
    [ 0.246417] pci 0000:00:1f.2: reg 1c: [io 0xc480-0xc483]
    [ 0.246430] pci 0000:00:1f.2: reg 20: [io 0xc400-0xc41f]
    [ 0.246443] pci 0000:00:1f.2: reg 24: [mem 0xfe9fb000-0xfe9fb7ff]
    [ 0.246501] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.246506] pci 0000:00:1f.2: PME# disabled
    [ 0.246598] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.246604] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.246610] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.246619] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.246718] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 0.246751] pci 0000:02:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff 64bit]
    [ 0.246873] pci 0000:02:00.0: supports D1
    [ 0.246876] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 0.246883] pci 0000:02:00.0: PME# disabled
    [ 0.246929] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.246935] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.246941] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.246950] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247043] pci 0000:03:00.0: [1969:1026] type 0 class 0x000200
    [ 0.247076] pci 0000:03:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
    [ 0.247094] pci 0000:03:00.0: reg 18: [io 0xec00-0xec7f]
    [ 0.247203] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.247210] pci 0000:03:00.0: PME# disabled
    [ 0.247248] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.247254] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.247259] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.247268] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247370] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.247376] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.247382] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.247391] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.247394] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.247397] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.247400] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.247403] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.247407] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode)
    [ 0.247437] pci_bus 0000:00: on NUMA node 0
    [ 0.247441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.247651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.247695] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
    [ 0.247885] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.248174] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.259190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
    [ 0.259248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
    [ 0.259304] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
    [ 0.259356] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
    [ 0.259410] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
    [ 0.259462] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
    [ 0.259517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
    [ 0.259572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
    [ 0.259683] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.259697] vgaarb: loaded
    [ 0.259699] vgaarb: bridge control possible 0000:00:02.0
    [ 0.259809] PCI: Using ACPI for IRQ routing
    [ 0.259812] PCI: pci_cache_line_size set to 64 bytes
    [ 0.259912] reserve RAM buffer: 0000000000097c00 - 000000000009ffff
    [ 0.259915] reserve RAM buffer: 000000007dd80000 - 000000007fffffff
    [ 0.260058] NetLabel: Initializing
    [ 0.260060] NetLabel: domain hash size = 128
    [ 0.260062] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.260077] NetLabel: unlabeled traffic allowed by default
    [ 0.260094] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.260103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.260108] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.270003] Switching to clocksource hpet
    [ 0.273239] Switched to NOHz mode on CPU #0
    [ 0.273288] Switched to NOHz mode on CPU #1
    [ 0.277882] pnp: PnP ACPI init
    [ 0.277905] ACPI: bus type pnp registered
    [ 0.278057] pnp 00:00: [bus 00-ff]
    [ 0.278061] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.278064] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.278069] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.278072] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.278075] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.278078] pnp 00:00: [mem 0x7de00000-0xffffffff window]
    [ 0.278081] pnp 00:00: [mem 0x00000000-0xffffffff window]
    [ 0.278186] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.278198] pnp 00:01: [mem 0xfed10000-0xfed19fff]
    [ 0.278259] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.278264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.278299] pnp 00:02: [dma 4]
    [ 0.278301] pnp 00:02: [io 0x0000-0x000f]
    [ 0.278304] pnp 00:02: [io 0x0081-0x0083]
    [ 0.278306] pnp 00:02: [io 0x0087]
    [ 0.278309] pnp 00:02: [io 0x0089-0x008b]
    [ 0.278311] pnp 00:02: [io 0x008f]
    [ 0.278313] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.278345] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.278357] pnp 00:03: [io 0x0070-0x0071]
    [ 0.278371] pnp 00:03: [irq 8]
    [ 0.278402] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.278441] pnp 00:04: [io 0x0060]
    [ 0.278443] pnp 00:04: [io 0x0064]
    [ 0.278449] pnp 00:04: [irq 1]
    [ 0.278483] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.278536] pnp 00:05: [irq 12]
    [ 0.278575] pnp 00:05: Plug and Play ACPI device, IDs ETD0001 PNP0f0e PNP0f0b PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.278586] pnp 00:06: [io 0x0061]
    [ 0.278618] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.278628] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.278634] pnp 00:07: [irq 13]
    [ 0.278667] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.278826] pnp 00:08: [io 0x0010-0x001f]
    [ 0.278829] pnp 00:08: [io 0x0022-0x003f]
    [ 0.278831] pnp 00:08: [io 0x0044-0x005f]
    [ 0.278833] pnp 00:08: [io 0x0063]
    [ 0.278836] pnp 00:08: [io 0x0065]
    [ 0.278838] pnp 00:08: [io 0x0067-0x006f]
    [ 0.278840] pnp 00:08: [io 0x0072-0x007f]
    [ 0.278842] pnp 00:08: [io 0x0080]
    [ 0.278845] pnp 00:08: [io 0x0084-0x0086]
    [ 0.278847] pnp 00:08: [io 0x0088]
    [ 0.278849] pnp 00:08: [io 0x008c-0x008e]
    [ 0.278852] pnp 00:08: [io 0x0090-0x009f]
    [ 0.278854] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.278856] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.278859] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.278861] pnp 00:08: [io 0x0800-0x087f]
    [ 0.278863] pnp 00:08: [io 0x0400-0x041f]
    [ 0.278866] pnp 00:08: [io 0x0500-0x057f]
    [ 0.278869] pnp 00:08: [mem 0xfe9fac00-0xfe9facff window]
    [ 0.278871] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.278874] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.278876] pnp 00:08: [mem 0xfed45000-0xfed89fff]
    [ 0.278879] pnp 00:08: [mem 0xfed90000-0xfed90fff]
    [ 0.278881] pnp 00:08: [mem 0xfed91000-0xfed91fff]
    [ 0.278884] pnp 00:08: [mem 0xfed92000-0xfed92fff]
    [ 0.278886] pnp 00:08: [mem 0xfed93000-0xfed93fff]
    [ 0.278888] pnp 00:08: [mem 0xffb00000-0xffbfffff]
    [ 0.278891] pnp 00:08: [mem 0xfff00000-0xffffffff]
    [ 0.278969] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.278973] system 00:08: [io 0x0800-0x087f] has been reserved
    [ 0.278976] system 00:08: [io 0x0400-0x041f] has been reserved
    [ 0.278979] system 00:08: [io 0x0500-0x057f] has been reserved
    [ 0.278982] system 00:08: [mem 0xfe9fac00-0xfe9facff window] has been reserved
    [ 0.278986] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.278989] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.278993] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
    [ 0.278996] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
    [ 0.278999] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
    [ 0.279002] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
    [ 0.279006] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
    [ 0.279009] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.279012] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.279016] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279083] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.279119] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.279178] pnp 00:0a: [mem 0xffa00000-0xffbfffff]
    [ 0.279181] pnp 00:0a: [mem 0xffe00000-0xffffffff]
    [ 0.279236] system 00:0a: [mem 0xffa00000-0xffbfffff] could not be reserved
    [ 0.279239] system 00:0a: [mem 0xffe00000-0xffffffff] could not be reserved
    [ 0.279243] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279292] pnp 00:0b: [mem 0xffc00000-0xffdfffff]
    [ 0.279347] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved
    [ 0.279351] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279412] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [ 0.279415] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [ 0.279417] pnp 00:0c: [mem 0xfec10000-0xfec17fff]
    [ 0.279419] pnp 00:0c: [mem 0xfec18000-0xfec1ffff]
    [ 0.279422] pnp 00:0c: [mem 0xfec38000-0xfec3ffff]
    [ 0.279424] pnp 00:0c: [io 0x0250-0x0253]
    [ 0.279427] pnp 00:0c: [io 0x0256-0x025f]
    [ 0.279484] system 00:0c: [io 0x0250-0x0253] has been reserved
    [ 0.279487] system 00:0c: [io 0x0256-0x025f] has been reserved
    [ 0.279491] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.279494] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.279497] system 00:0c: [mem 0xfec10000-0xfec17fff] has been reserved
    [ 0.279501] system 00:0c: [mem 0xfec18000-0xfec1ffff] has been reserved
    [ 0.279504] system 00:0c: [mem 0xfec38000-0xfec3ffff] has been reserved
    [ 0.279508] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279585] pnp 00:0d: [mem 0xe0000000-0xefffffff]
    [ 0.279641] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.279645] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279954] pnp 00:0e: [mem 0x00000000-0x0009ffff]
    [ 0.279957] pnp 00:0e: [mem 0x000c0000-0x000cffff]
    [ 0.279965] pnp 00:0e: [mem 0x000e0000-0x000fffff]
    [ 0.279967] pnp 00:0e: [mem 0x00100000-0x7ddfffff]
    [ 0.279970] pnp 00:0e: [mem 0x00000000-0xffffffff disabled]
    [ 0.280081] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.280085] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.280088] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.280092] system 00:0e: [mem 0x00100000-0x7ddfffff] could not be reserved
    [ 0.280095] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.280257] pnp: PnP ACPI: found 15 devices
    [ 0.280259] ACPI: ACPI bus type pnp unregistered
    [ 0.316954] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.317008] pci 0000:00:1c.5: BAR 15: assigned [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317012] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.317014] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.317021] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.317026] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.317035] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [ 0.317037] pci 0000:00:1c.1: bridge window [io disabled]
    [ 0.317045] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.317050] pci 0000:00:1c.1: bridge window [mem pref disabled]
    [ 0.317059] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.317063] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
    [ 0.317070] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
    [ 0.317077] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317086] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.317088] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.317094] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.317100] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.317124] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.317130] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.317141] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.317147] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.317156] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.317162] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.317171] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.317176] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.317179] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.317181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.317184] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.317187] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff]
    [ 0.317191] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.317194] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
    [ 0.317197] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
    [ 0.317200] pci_bus 0000:03: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref]
    [ 0.317203] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.317206] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.317209] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.317211] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.317214] pci_bus 0000:04: resource 8 [mem 0x7de00000-0xffffffff]
    [ 0.317261] NET: Registered protocol family 2
    [ 0.317339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.317587] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.318048] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.318337] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.318341] TCP reno registered
    [ 0.318344] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.318357] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.318534] NET: Registered protocol family 1
    [ 0.318557] pci 0000:00:02.0: Boot video device
    [ 0.318744] PCI: CLS 32 bytes, default 64
    [ 0.318812] Unpacking initramfs...
    [ 0.362878] Freeing initrd memory: 2132k freed
    [ 0.363915] Simple Boot Flag at 0x51 set to 0x1
    [ 0.364233] apm: BIOS not found.
    [ 0.364425] audit: initializing netlink socket (disabled)
    [ 0.364441] type=2000 audit(1312909012.363:1): initialized
    [ 0.368688] highmem bounce pool size: 64 pages
    [ 0.368694] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.378607] VFS: Disk quotas dquot_6.5.2
    [ 0.378705] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.378834] msgmni has been set to 1713
    [ 0.379068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.379105] io scheduler noop registered
    [ 0.379108] io scheduler deadline registered
    [ 0.379123] io scheduler cfq registered (default)
    [ 0.379271] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.379334] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.379455] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.379513] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.379630] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.379688] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.379845] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.379852] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.379878] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
    [ 0.379881] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.379887] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
    [ 0.379912] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.379915] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.379921] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.380079] intel_idle: MWAIT substates: 0x2220
    [ 0.380081] intel_idle: does not run on family 6 model 23
    [ 0.380087] ERST: Table is not found!
    [ 0.380103] isapnp: Scanning for PnP cards...
    [ 0.737174] isapnp: No Plug & Play device found
    [ 0.737249] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.927374] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.930998] i8042: Detected active multiplexing controller, rev 1.1
    [ 0.934050] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.934091] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 0.934122] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 0.934155] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 0.934186] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 0.934296] mousedev: PS/2 mouse device common for all mice
    [ 0.934388] rtc_cmos 00:03: RTC can wake from S4
    [ 0.934524] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.934557] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.934588] cpuidle: using governor ladder
    [ 0.934590] cpuidle: using governor menu
    [ 0.934876] TCP cubic registered
    [ 0.934879] NET: Registered protocol family 17
    [ 0.934888] Registering the dns_resolver key type
    [ 0.934915] Using IPI No-Shortcut mode
    [ 0.935017] PM: Hibernation image not present or could not be loaded.
    [ 0.935024] registered taskstats version 1
    [ 0.939311] rtc_cmos 00:03: setting system clock to 2011-08-09 16:56:53 UTC (1312909013)
    [ 0.939352] Initializing network drop monitor service
    [ 0.939447] Freeing unused kernel memory: 500k freed
    [ 0.939681] Write protecting the kernel text: 3416k
    [ 0.939709] Write protecting the kernel read-only data: 1036k
    [ 0.953922] udevd[54]: starting version 173
    [ 0.977498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.019140] usbcore: registered new interface driver usbfs
    [ 1.019176] usbcore: registered new interface driver hub
    [ 1.049312] usbcore: registered new device driver usb
    [ 1.050500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.050540] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.050563] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.050567] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.050604] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.050644] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.068233] SCSI subsystem initialized
    [ 1.068335] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 1.068361] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe9fbc00
    [ 1.079182] libata version 3.00 loaded.
    [ 1.080102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.080303] hub 1-0:1.0: USB hub found
    [ 1.080309] hub 1-0:1.0: 6 ports detected
    [ 1.080423] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.080445] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.080450] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.080461] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.080495] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.084638] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 1.084665] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fb800
    [ 1.096705] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.097358] hub 2-0:1.0: USB hub found
    [ 1.097365] hub 2-0:1.0: 6 ports detected
    [ 1.097486] ahci 0000:00:1f.2: version 3.0
    [ 1.097508] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.097565] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 1.097619] ahci: SSS flag set, parallel bus scan disabled
    [ 1.097653] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 1.097657] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 1.097664] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.103903] scsi0 : ahci
    [ 1.104030] scsi1 : ahci
    [ 1.104126] scsi2 : ahci
    [ 1.104218] scsi3 : ahci
    [ 1.104495] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 43
    [ 1.104500] ata2: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb180 irq 43
    [ 1.104502] ata3: DUMMY
    [ 1.104504] ata4: DUMMY
    [ 1.163917] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.163984] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163997] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.164113] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.164129] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.164178] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
    [ 1.164368] hub 3-0:1.0: USB hub found
    [ 1.164373] hub 3-0:1.0: 2 ports detected
    [ 1.164477] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 1.164486] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.164490] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.164500] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.164539] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
    [ 1.164699] hub 4-0:1.0: USB hub found
    [ 1.164704] hub 4-0:1.0: 2 ports detected
    [ 1.164787] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.164795] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.164799] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.164808] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.164848] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480
    [ 1.165008] hub 5-0:1.0: USB hub found
    [ 1.165012] hub 5-0:1.0: 2 ports detected
    [ 1.165099] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 1.165107] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.165111] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.165122] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.165154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
    [ 1.165311] hub 6-0:1.0: USB hub found
    [ 1.165316] hub 6-0:1.0: 2 ports detected
    [ 1.165398] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.165408] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.165412] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.165421] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.165450] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
    [ 1.165607] hub 7-0:1.0: USB hub found
    [ 1.165611] hub 7-0:1.0: 2 ports detected
    [ 1.165696] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.165704] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.165708] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.165717] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.165747] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
    [ 1.165914] hub 8-0:1.0: USB hub found
    [ 1.165919] hub 8-0:1.0: 2 ports detected
    [ 1.366705] Refined TSC clocksource calibration: 1795.499 MHz.
    [ 1.366711] Switching to clocksource tsc
    [ 1.386680] usb 1-3: new high speed USB device number 2 using ehci_hcd
    [ 1.423359] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.425060] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.425379] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.425384] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.427244] ata1.00: ATA-8: ST9320325AS, 0002SDM1, max UDMA/133
    [ 1.427247] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.429377] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.429687] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.429691] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.431520] ata1.00: configured for UDMA/133
    [ 1.431677] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0002 PQ: 0 ANSI: 5
    [ 1.750027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.765044] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.765049] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.778146] ata2.00: ATAPI: Optiarc DVD RW AD-7580S, FX20, max UDMA/100
    [ 1.794186] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
    [ 1.794191] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.807014] ata2.00: configured for UDMA/100
    [ 1.810609] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7580S FX20 PQ: 0 ANSI: 5
    [ 1.817797] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.817854] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.817857] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.817881] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.822707] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.822711] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.823032] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.836683] usb 6-2: new low speed USB device number 2 using uhci_hcd
    [ 1.859083] sda: sda1 sda2 sda3 sda4 < sda5 >
    [ 1.859555] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.023721] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input1
    [ 2.023829] generic-usb 0003:13EE:0003.0001: input,hidraw0: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:1d.0-2/input0
    [ 2.023850] usbcore: registered new interface driver usbhid
    [ 2.023852] usbhid: USB HID core driver
    [ 2.650851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.258021] udevd[287]: starting version 173
    [ 4.739711] asus_acpi: Asus Laptop ACPI Extras version 0.30
    [ 4.739876] asus_acpi: unsupported model K50IJ, trying default values
    [ 4.739878] asus_acpi: send /proc/acpi/dsdt to the developers
    [ 4.816300] iTCO_vendor_support: vendor-support=0
    [ 4.824448] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.824569] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
    [ 4.824660] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.827238] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.827382] ACPI: AC Adapter [AC0] (on-line)
    [ 4.828155] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 4.828165] ACPI: Sleep Button [SLPB]
    [ 4.828230] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 4.831492] ACPI: Lid Switch [LID]
    [ 4.831614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 4.831621] ACPI: Power Button [PWRF]
    [ 4.865124] Linux agpgart interface v0.103
    [ 4.921369] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.936814] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.936824] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.941752] ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.941770] ATL1E 0000:03:00.0: setting latency timer to 64
    [ 4.945788] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.945792] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.970466] ACPI: acpi_idle registered with cpuidle
    [ 4.974411] Monitor-Mwait will be used to enter C-1 state
    [ 4.974445] Monitor-Mwait will be used to enter C-2 state
    [ 4.974469] Monitor-Mwait will be used to enter C-3 state
    [ 4.974477] Marking TSC unstable due to TSC halts in idle
    [ 4.975874] Switching to clocksource hpet
    [ 5.032723] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.032822] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.033439] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
    [ 5.033728] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 5.105663] [drm] Initialized drm 1.1.0 20060810
    [ 5.107962] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.107977] ath9k 0000:02:00.0: setting latency timer to 64
    [ 5.142586] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.142593] i915 0000:00:02.0: setting latency timer to 64
    [ 5.159185] ath: EEPROM regdomain: 0x60
    [ 5.159188] ath: EEPROM indicates we should expect a direct regpair map
    [ 5.159191] ath: Country alpha2 being used: 00
    [ 5.159193] ath: Regpair used: 0x60
    [ 5.168070] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 5.168078] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.168080] [drm] Driver supports precise vblank timestamp query.
    [ 5.168129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 5.191736] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 5.192424] Registered led device: ath9k-phy0
    [ 5.192433] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf81a0000, irq=17
    [ 5.288322] asus_laptop: Asus Laptop Support version 0.42
    [ 5.288486] asus_laptop: K50IJ model detected
    [ 5.288978] asus_laptop: Backlight controlled by ACPI video driver
    [ 5.289084] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5
    [ 5.393429] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.393627] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 5.597755] psmouse serio4: ID: 10 00 64
    [ 5.702553] elantech: assuming hardware version 2, firmware version 4.1.1
    [ 5.738839] elantech: Synaptics capabilities query result 0x7e, 0x13, 0x0d.
    [ 5.780864] fbcon: inteldrmfb (fb0) is primary device
    [ 5.825826] Console: switching to colour frame buffer device 170x48
    [ 5.831063] fb0: inteldrmfb frame buffer device
    [ 5.831065] drm: registered panic notifier
    [ 5.833323] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
    [ 5.834567] acpi device:38: registered as cooling_device2
    [ 5.834817] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
    [ 5.834975] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 5.835272] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 5.835329] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 5.835420] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 5.835458] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 5.840235] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
    [ 6.069285] Linux media interface: v0.10
    [ 6.088833] Linux video capture interface: v2.00
    [ 6.097205] uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
    [ 6.120085] input: CNF7129 as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
    [ 6.120179] usbcore: registered new interface driver uvcvideo
    [ 6.120181] USB Video Class driver (v1.1.0)
    [ 7.622339] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 7.907480] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.987363] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.044201] Adding 4213756k swap on /dev/sda5. Priority:-1 extents:1 across:4213756k
    Xorg.0.log:
    [ 25.092]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 25.092]
    X.Org X Server 1.10.3.901 (1.10.4 RC 1)
    Release Date: 2011-07-29
    [ 25.092] X Protocol Version 11, Revision 0
    [ 25.092] Build Operating System: Linux 3.0.0-ARCH i686
    [ 25.092] Current Operating System: Linux saso-laptop 3.0-ARCH #1 SMP PREEMPT Sat Aug 6 16:49:00 CEST 2011 i686
    [ 25.093] Kernel command line: root=/dev/sda1 ro quiet
    [ 25.093] Build Date: 08 August 2011 08:28:07AM
    [ 25.093]
    [ 25.093] Current version of pixman: 0.22.2
    [ 25.093] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 25.093] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 25.093] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 9 18:57:17 2011
    [ 25.215] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 25.248] (==) No Layout section. Using the first Screen section.
    [ 25.248] (==) No screen section available. Using defaults.
    [ 25.248] (**) |-->Screen "Default Screen Section" (0)
    [ 25.248] (**) | |-->Monitor "<default monitor>"
    [ 25.248] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 25.248] (==) Automatically adding devices
    [ 25.248] (==) Automatically enabling devices
    [ 25.303] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 25.303] Entry deleted from font path.
    [ 25.339] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 25.339] Entry deleted from font path.
    [ 25.339] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 25.340] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 25.340] Entry deleted from font path.
    [ 25.340] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 25.340] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 25.340] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 25.340] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 25.340] (II) Loader magic: 0x822e4e0
    [ 25.340] (II) Module ABI versions:
    [ 25.340] X.Org ANSI C Emulation: 0.4
    [ 25.340] X.Org Video Driver: 10.0
    [ 25.340] X.Org XInput driver : 12.2
    [ 25.340] X.Org Server Extension : 5.0
    [ 25.341] (--) PCI:*(0:0:2:0) 8086:2a42:1043:1862 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
    [ 25.341] (--) PCI: (0:0:2:1) 8086:2a43:1043:1862 rev 9, Mem @ 0xfe800000/1048576
    [ 25.341] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 25.341] (II) LoadModule: "extmod"
    [ 25.358] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 25.373] (II) Module extmod: vendor="X.Org Foundation"
    [ 25.373] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.373] Module class: X.Org Server Extension
    [ 25.373] ABI class: X.Org Server Extension, version 5.0
    [ 25.373] (II) Loading extension MIT-SCREEN-SAVER
    [ 25.373] (II) Loading extension XFree86-VidModeExtension
    [ 25.373] (II) Loading extension XFree86-DGA
    [ 25.374] (II) Loading extension DPMS
    [ 25.374] (II) Loading extension XVideo
    [ 25.374] (II) Loading extension XVideo-MotionCompensation
    [ 25.374] (II) Loading extension X-Resource
    [ 25.374] (II) LoadModule: "dbe"
    [ 25.374] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 25.387] (II) Module dbe: vendor="X.Org Foundation"
    [ 25.387] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.387] Module class: X.Org Server Extension
    [ 25.387] ABI class: X.Org Server Extension, version 5.0
    [ 25.387] (II) Loading extension DOUBLE-BUFFER
    [ 25.387] (II) LoadModule: "glx"
    [ 25.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 25.411] (II) Module glx: vendor="X.Org Foundation"
    [ 25.411] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.411] ABI class: X.Org Server Extension, version 5.0
    [ 25.411] (==) AIGLX enabled
    [ 25.411] (II) Loading extension GLX
    [ 25.411] (II) LoadModule: "record"
    [ 25.411] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 25.412] (II) Module record: vendor="X.Org Foundation"
    [ 25.412] compiled for 1.10.3.901, module version = 1.13.0
    [ 25.412] Module class: X.Org Server Extension
    [ 25.412] ABI class: X.Org Server Extension, version 5.0
    [ 25.412] (II) Loading extension RECORD
    [ 25.412] (II) LoadModule: "dri"
    [ 25.412] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 25.420] (II) Module dri: vendor="X.Org Foundation"
    [ 25.420] compiled for 1.10.3.901, module version = 1.0.0
    [ 25.420] ABI class: X.Org Server Extension, version 5.0
    [ 25.420] (II) Loading extension XFree86-DRI
    [ 25.420] (II) LoadModule: "dri2"
    [ 25.420] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 25.428] (II) Module dri2: vendor="X.Org Foundation"
    [ 25.428] compiled for 1.10.3.901, module version = 1.2.0
    [ 25.428] ABI class: X.Org Server Extension, version 5.0
    [ 25.429] (II) Loading extension DRI2
    [ 25.429] (==) Matched intel as autoconfigured driver 0
    [ 25.429] (==) Matched vesa as autoconfigured driver 1
    [ 25.429] (==) Matched fbdev as autoconfigured driver 2
    [ 25.429] (==) Assigned the driver to the xf86ConfigLayout
    [ 25.429] (II) LoadModule: "intel"
    [ 25.429] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 25.448] (II) Module intel: vendor="X.Org Foundation"
    [ 25.448] compiled for 1.10.2, module version = 2.15.0
    [ 25.448] Module class: X.Org Video Driver
    [ 25.448] ABI class: X.Org Video Driver, version 10.0
    [ 25.448] (II) LoadModule: "vesa"
    [ 25.449] (WW) Warning, couldn't open module vesa
    [ 25.449] (II) UnloadModule: "vesa"
    [ 25.449] (II) Unloading vesa
    [ 25.449] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 25.451] (II) LoadModule: "fbdev"
    [ 25.451] (WW) Warning, couldn't open module fbdev
    [ 25.451] (II) UnloadModule: "fbdev"
    [ 25.451] (II) Unloading fbdev
    [ 25.451] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 25.453] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 25.454] (--) using VT number 7
    [ 25.461] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 25.461] drmOpenDevice: node name is /dev/dri/card0
    [ 25.461] drmOpenDevice: open result is 9, (OK)
    [ 25.462] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 25.462] drmOpenDevice: node name is /dev/dri/card0
    [ 25.462] drmOpenDevice: open result is 9, (OK)
    [ 25.462] drmOpenByBusid: drmOpenMinor returns 9
    [ 25.462] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 25.462] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 25.462] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 25.462] (==) intel(0): RGB weight 888
    [ 25.462] (==) intel(0): Default visual is TrueColor
    [ 25.462] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
    [ 25.462] (--) intel(0): Chipset: "GM45"
    [ 25.462] (**) intel(0): Relaxed fencing enabled
    [ 25.462] (**) intel(0): Framebuffer tiled
    [ 25.462] (**) intel(0): Pixmaps tiled
    [ 25.462] (**) intel(0): 3D buffers tiled
    [ 25.462] (**) intel(0): SwapBuffers wait enabled
    [ 25.462] (==) intel(0): video overlay key set to 0x101fe
    [ 25.462] (II) intel(0): Output LVDS1 has no monitor section
    [ 25.462] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 25.480] (II) intel(0): Output VGA1 has no monitor section
    [ 26.013] (II) intel(0): Output HDMI1 has no monitor section
    [ 26.014] (II) intel(0): Output DP1 has no monitor section
    [ 26.015] (II) intel(0): Output DP2 has no monitor section
    [ 26.015] (II) intel(0): EDID for output LVDS1
    [ 26.015] (II) intel(0): Manufacturer: LGD Model: 1e8 Serial#: 0
    [ 26.015] (II) intel(0): Year: 2008 Week: 0
    [ 26.015] (II) intel(0): EDID Version: 1.3
    [ 26.015] (II) intel(0): Digital Display Input
    [ 26.015] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 26.015] (II) intel(0): Gamma: 2.20
    [ 26.015] (II) intel(0): No DPMS capabilities specified
    [ 26.015] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 26.015] (II) intel(0): First detailed timing is preferred mode
    [ 26.015] (II) intel(0): redX: 0.618 redY: 0.355 greenX: 0.335 greenY: 0.584
    [ 26.015] (II) intel(0): blueX: 0.150 blueY: 0.102 whiteX: 0.313 whiteY: 0.329
    [ 26.015] (II) intel(0): Manufacturer's mask: 0
    [ 26.015] (II) intel(0): Supported detailed timing:
    [ 26.015] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 194 mm
    [ 26.015] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 26.015] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 790 v_border: 0
    [ 26.015] (II) intel(0): LG Display
    [ 26.015] (II) intel(0): LP156WH2-TLA1
    [ 26.015] (II) intel(0): EDID (in hex):
    [ 26.015] (II) intel(0): 00ffffffffffff0030e4e80100000000
    [ 26.015] (II) intel(0): 00120103802213780a4e859e5b559526
    [ 26.015] (II) intel(0): 1a505400000001010101010101010101
    [ 26.015] (II) intel(0): 0101010101013e1c56a0500016303020
    [ 26.015] (II) intel(0): 350058c2100000190000000000000000
    [ 26.015] (II) intel(0): 00000000000000000000000000fe004c
    [ 26.015] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 26.016] (II) intel(0): 004c503135365748322d544c4131004d
    [ 26.016] (II) intel(0): EDID vendor "LGD", prod id 488
    [ 26.016] (II) intel(0): Printing DDC gathered Modelines:
    [ 26.016] (II) intel(0): Modeline "1366x768"x0.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
    [ 26.016] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 26.016] (II) intel(0): Printing probed modes for output LVDS1
    [ 26.016] (II) intel(0): Modeline "1366x768"x60.0 72.30 1366 1414 1446 1526 768 771 776 790 -hsync -vsync (47.4 kHz)
    [ 26.016] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 26.016] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 26.016] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 26.016] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 26.033] (II) intel(0): EDID for output VGA1
    [ 26.566] (II) intel(0): EDID for output HDMI1
    [ 26.567] (II) intel(0): EDID for output DP1
    [ 26.568] (II) intel(0): EDID for output DP2
    [ 26.568] (II) intel(0): Output LVDS1 connected
    [ 26.568] (II) intel(0): Output VGA1 disconnected
    [ 26.568] (II) intel(0): Output HDMI1 disconnected
    [ 26.568] (II) intel(0): Output DP1 disconnected
    [ 26.568] (II) intel(0): Output DP2 disconnected
    [ 26.568] (II) intel(0): Using exact sizes for initial modes
    [ 26.568] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 26.568] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 26.568] (II) intel(0): Kernel page flipping support detected, enabling
    [ 26.568] (**) intel(0): Display dimensions: (340, 190) mm
    [ 26.568] (**) intel(0): DPI set to (102, 102)
    [ 26.568] (II) Loading sub module "fb"
    [ 26.569] (II) LoadModule: "fb"
    [ 26.569] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 26.584] (II) Module fb: vendor="X.Org Foundation"
    [ 26.584] compiled for 1.10.3.901, module version = 1.0.0
    [ 26.584] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 26.584] (II) Loading sub module "dri2"
    [ 26.585] (II) LoadModule: "dri2"
    [ 26.585] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 26.585] (II) Module dri2: vendor="X.Org Foundation"
    [ 26.585] compiled for 1.10.3.901, module version = 1.2.0
    [ 26.585] ABI class: X.Org Server Extension, version 5.0
    [ 26.585] (==) Depth 24 pixmap format is 32 bpp
    [ 26.585] (II) intel(0): [DRI2] Setup complete
    [ 26.585] (II) intel(0): [DRI2] DRI driver: i965
    [ 26.585] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 26.600] (II) UXA(0): Driver registered support for the following operations:
    [ 26.600] (II) solid
    [ 26.600] (II) copy
    [ 26.600] (II) composite (RENDER acceleration)
    [ 26.600] (II) put_image
    [ 26.600] (II) get_image
    [ 26.600] (==) intel(0): Backing store disabled
    [ 26.600] (==) intel(0): Silken mouse enabled
    [ 26.601] (II) intel(0): Initializing HW Cursor
    [ 26.613] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 26.614] (==) intel(0): DPMS enabled
    [ 26.614] (==) intel(0): Intel XvMC decoder enabled
    [ 26.614] (II) intel(0): Set up textured video
    [ 26.614] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 26.614] (II) intel(0): direct rendering: DRI2 Enabled
    [ 26.614] (==) intel(0): hotplug detection: "enabled"
    [ 26.614] (--) RandR disabled
    [ 26.614] (II) Initializing built-in extension Generic Event Extension
    [ 26.614] (II) Initializing built-in extension SHAPE
    [ 26.614] (II) Initializing built-in extension MIT-SHM
    [ 26.614] (II) Initializing built-in extension XInputExtension
    [ 26.614] (II) Initializing built-in extension XTEST
    [ 26.614] (II) Initializing built-in extension BIG-REQUESTS
    [ 26.614] (II) Initializing built-in extension SY

    Sorry for that. I had some issues with reproducing the problem. It seems that i can reproduce it only on fresh restart.
    Last edited by Shark (2011-08-09 18:27:10)

  • External Monitor on Macbook Pro freezes after deleting old profiles

    Environment:
    15 inch MacBook Pro, Mid 2010, 2.4 GHz, 8GB, NVIDIA GeForce graphics
    Yosemite 10.10.1
    External Monitor: Samsung SyncMaster 245T running in Extended Mode with the laptop
    I have been using the above setup for several years with no issues. Yesterday I did a calibration of the external SyncMaster monitor with Datacolor Spyder3 as I have done many times in the past. The calibration was saved, but an error message flashed by before the file was saved. Checking with the ColorSync utility, the new saved colorspace appeared somewhat smaller than the last one.
    I noticed that I had too many old profiles from previous calibrations still there, so I tried cleaning the directory up. I opened System Pref/Display/Color, clicked on an unwanted profile and delete the profile, and reset it to the profile that I wanted. Repeated this a few times and the SyncMaster appeared to be good.
    Now I tried the same with the Macbook. Fine, deleted a few profiles but something now messed up the SyncMaster. It colors, including the dock, contorted to an ugly mess. Cursor changed to a spinning wheel, and I could not click or select anything either on the SyncMaster or the Mac. Rebooted, pulling the Syncmaster adapter out of the mac. Everything good, until I plug the Syncmaster back in, and I am back to the spinning wheel.
    There must be some way to uninstall, re-install the Syncmaster?
    How can I resolve this?
    Any help would be much appreciated. Thank you.

    Aha, all is good.
    I went to Library/ColorSync/Profiles/Displays
    and to home/Library/ColorSync/Profiles/Displays
    and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
    Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
    My display works normally, now.

  • Surface Pro 3 Display/Video/Graphics Driver Issues - DisplayPort, External Monitors, Windows 10 Build 9926

    Surface Pro 3 - i5 with Intel HD Graphics 4400
    Windows 10 build 9926
    All Latest updates installed
    Intel Graphics Driver 10.18.15.4079.
    Latest system update released on Jan 22nd (which I understand is just the latest intel graphics driver?). 
    The display driver status has this error message: Windows has stopped this device because it
    has reported problems. (Code 43)  - I assume it's
    reverting to the basic Microsoft driver when this occurs. Which explains why my displayport (External monitors) will not work.
    I have uninstalled the driver completely (and deleted the driver files), tried the Windows basic driver,
    and rebooted several times with no luck.
    I cannot get my docking station displayport or the  displayporton my surface pro 3 working. 
    According to Microsoft (see below), this is a known issue UNTIL you update to display driver
    version 4079  - which I have.  
    Known issues on Surface after updating to Windows 10 January Technical Preview
    On Surface Pro 2 and Surface Pro 3, the Mini DisplayPort won’t work on the Windows 10 January Technical Preview until you’ve installed graphics driver 4079 or later. Check Windows Update often for the most recent graphics driver.
    On Surface Pro 2 and Surface Pro 3, you’ll notice poor graphics rendering on the Windows 10 January Technical Preview until you’ve installed graphics driver 4079 or newer from Windows Update. Check Windows Update often for the most recent graphics driver.
    If you’re using video driver 3496, you may need to start in safe mode and remove that driver. Then restart Surface in normal mode and go to Windows Update to get the most recent graphics driver.

    Hi Nicholas,
    Similar issue has been asked here:
    Surface Pro 3 restarting after a series of blank screens!
    For error code 43, here is a reference:
    Code 43: Windows has stopped this device because it has reported problems
    For the current situation, please try to wait for the driver update, as display driver version 4079 didn't work well at your side, please submit this through Windows Feedback Tool.
    Best regards
    Michael Shao
    TechNet Community Support

  • How to blank laptop screen when using external monitor/

    Hi there
    I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor.  I have Arch Linux installed along with Ubuntu Feisty.  In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in.  The laptop monitor goes blank when the external monitor is plugged in.
    In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx).  I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also.  However the laptop monitor also continues to function when the external monitor is plugged in.  I would like to blank the laptop monitor when using the external monitor.
    I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below.  Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
    I am using XFCE as my Desktop environment.
    Arch Linux xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # Files section.  This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"        "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "1412"
    #    Option     "MaxX"          "15184"
    #    Option     "MinY"          "15372"
    #    Option     "MaxY"          "1230"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"        "/dev/ttyS0"
    #    Option     "MinX"          "231"
    #    Option     "MaxX"          "3868"
    #    Option     "MinY"          "3858"
    #    Option     "MaxY"          "272"
    #    Option     "ScreenNumber"  "0"
    #    Option     "ReportingMode" "Scaled"
    #    Option     "ButtonThreshold"       "17"
    #    Option     "ButtonNumber"  "1"
    #    Option     "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    #    Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.  In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
        Identifier     "Simple Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Mouse1" "CorePointer"
        InputDevice    "Keyboard1" "CoreKeyboard"
    EndSection
    Section "Files"
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    #    RgbPath    "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #    FontPath   "/usr/share/fonts/TTF"
    #    FontPath   "/usr/share/fonts/Type1"
    #    FontPath   "/usr/lib/X11/fonts/local/"
    #    FontPath   "/usr/lib/X11/fonts/misc/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
    #    FontPath   "/usr/lib/X11/fonts/Speedo/"
    #    FontPath   "/usr/lib/X11/fonts/Type1/"
    #    FontPath   "/usr/lib/X11/fonts/TrueType/"
    #    FontPath   "/usr/lib/X11/fonts/freefont/"
    #    FontPath   "/usr/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/lib/X11/fonts/100dpi/"
    # The module search path.  The default path is shown here.
    #    ModulePath "/usr/lib/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/100dpi:unscaled"
        FontPath     "/usr/share/fonts/75dpi:unscaled"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    #    Load        "type1"
    # This loads the GLX module
    #    Load       "glx"
    # This loads the DRI module
    #    Load       "dri"
        Load  "dbe"      # Double buffer extension
        SubSection "extmod"
            Option        "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
        Load  "freetype"
    #    Load        "xtt"
    EndSection
    Section "InputDevice"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    #    Option     "Protocol"      "Xqueue"
    #    Option    "Xleds"      "1 2 3"
    #    Option "LeftAlt"     "Meta"
    #    Option "RightAlt"    "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"    "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"    "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"   "de"
    # or:
    #    Option "XkbLayout"   "de"
    #    Option "XkbVariant"  "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions"  "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    #    Option "XkbRules"    "xorg"
    #    Option "XkbModel"    "pc105"
    #    Option "XkbLayout"   "us"
    #    Option "XkbVariant"  ""
    #    Option "XkbOptions"  ""
    #    Option "XkbDisable"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option        "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
        Option        "XkbRules" "xorg"
        Option        "XkbModel" "pc104"
        Option        "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    # Identifier and driver
    # the following line.
    #    Option "Protocol"    "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    #    Option "Resolution"    "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    #    Option "BaudRate"    "9600"
    #    Option "SampleRate"    "150"
    # Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    #    Option "ChordMiddle"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option        "Protocol" "Auto"    # Auto detect
        Option        "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
        Option        "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    #    HorizSync    30-64         # multisync
    #    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
    #    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
        Identifier   "My Monitor"
        HorizSync    30.0 - 62.0
        VertRefresh  50.0 - 70.0
    EndSection
    Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option        "VendorName" "ATI Proprietary Driver"
        Option        "ModelName" "Generic Autodetecting Monitor"
        Option        "DPMS" "true"
    EndSection
    Section "Device"
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    #    Chipset    "generic"
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # intalled.
    #    BusID      "PCI:0:10:0"
    #    VideoRam    256
    #    Clocks    25.2 28.3
        Identifier  "Standard VGA"
        Driver      "vga"
        VendorName  "Unknown"
        BoardName   "Unknown"
    EndSection
    Section "Device"
        #VideoRam    131072
        # Insert Clocks lines here if appropriate
        Identifier  "* Generic VESA compatible"
        Driver      "vesa"
    EndSection
    Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
    EndSection
    Section "Screen"
        Identifier "Screen 1"
        Device     "* Generic VESA compatible"
        Monitor    "My Monitor"
        DefaultDepth     24
        SubSection "Display"
            Viewport   0 0
            Depth     8
            Modes    "1280x800" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
            Modes    "1280x800" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
            Modes    "1280x800" "800x600" "640x480"
        EndSubSection
    EndSection
    Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
            Viewport   0 0
            Depth     24
        EndSubSection
    EndSection
    Ubuntu xorg.conf
    # /etc/X11/xorg.conf (xorg X Window System server configuration file)
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    # Edit this file with caution, and see the xorg.conf(5) manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    Section "Files"
        FontPath    "/usr/share/fonts/X11/misc"
        FontPath    "/usr/share/fonts/X11/cyrillic"
        FontPath    "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath    "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath    "/usr/share/fonts/X11/Type1"
        FontPath    "/usr/share/fonts/X11/100dpi"
        FontPath    "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    EndSection
    Section "Module"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "vbe"
    EndSection
    Section "InputDevice"
        Identifier    "Generic Keyboard"
        Driver        "kbd"
        Option        "CoreKeyboard"
        Option        "XkbRules"    "xorg"
        Option        "XkbModel"    "pc105"
        Option        "XkbLayout"    "us"
    EndSection
    Section "InputDevice"
        Identifier    "Configured Mouse"
        Driver        "mouse"
        Option        "CorePointer"
        Option        "Device"        "/dev/input/mice"
        Option        "Protocol"        "ImPS/2"
        Option        "ZAxisMapping"        "4 5"
        Option        "Emulate3Buttons"    "true"
    EndSection
    Section "InputDevice"
        Identifier    "Synaptics Touchpad"
        Driver        "synaptics"
        Option        "SendCoreEvents"    "true"
        Option        "Device"        "/dev/psaux"
        Option        "Protocol"        "auto-dev"
        Option        "HorizScrollDelta"    "0"
    EndSection
    Section "InputDevice"
        Driver        "wacom"
        Identifier    "stylus"
        Option        "Device"    "/dev/input/wacom"
        Option        "Type"        "stylus"
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
    EndSection
    Section "InputDevice"
        Driver        "wacom"
        Identifier    "eraser"
        Option        "Device"    "/dev/input/wacom"
        Option        "Type"        "eraser"
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
    EndSection
    Section "InputDevice"
        Driver        "wacom"
        Identifier    "cursor"
        Option        "Device"    "/dev/input/wacom"
        Option        "Type"        "cursor"
        Option        "ForceDevice"    "ISDV4"        # Tablet PC ONLY
    EndSection
    Section "Device"
        Identifier    "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
        Driver        "ati"
        BusID        "PCI:1:5:0"
    EndSection
    Section "Monitor"
        Identifier    "Generic Monitor"
        Option        "DPMS"
    EndSection
    Section "Screen"
        Identifier    "Default Screen"
        Device        "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
        Monitor        "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
            Depth        1
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        4
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        8
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        15
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        16
            Modes        "1280x800"
        EndSubSection
        SubSection "Display"
            Depth        24
            Modes        "1280x800"
        EndSubSection
    EndSection
    Section "ServerLayout"
        Identifier    "Default Layout"
        Screen        "Default Screen"
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice     "stylus"    "SendCoreEvents"
        InputDevice     "cursor"    "SendCoreEvents"
        InputDevice     "eraser"    "SendCoreEvents"
        InputDevice    "Synaptics Touchpad"
    EndSection
    Section "DRI"
        Mode    0666
    EndSection

    Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
    On my laptop (Thinkpad x60s) that would be:
    xrandr --output VGA --auto
    xrandr --output LVDS --off

Maybe you are looking for

  • Getting file name and date taken to appear in thumbnails

    How do I get my thumbnails in Media to show the file name of each photo and also the date taken? Right clicking on the thumbnail reflects that the "show file info" box is checked. I have Elements 11 (was using Elements 6) and the operating system in

  • Schema Mapping

    Hi, I have a simple class Class Customer { String name; String address; String dep; and try to map to table Customer which only has name and address columns. so I only define 2 fields in customer.jdo. But kodo keeping generate "depX" in SQL and I got

  • Photofun Studio et Windows 8.1 (x64)

    I received PHOTOfunSTUDIO 9.3 PE software with my Panasonic DMC-ZS40 camera.  I installed and uninstalled, then reinstalled and I still cannot get the software to work or even open.  I get a system error message that reads : «PHOTOFUNSTUDIO A CESSÉ D

  • SD Document Category to CRM Leading Transaction

    Does anyone have a listing that indicates what the SD Document Category should map to within CRM for the Leading Transaction? For exmaple, SD document category of "C" should map to the CRM leading transaction of CRM2000115 Sales Transaction. SD docum

  • Trying to install lion purchased from app store.  alert says software cannot be verified and may be tampered with.  Cannot get past alert.  help?

    I have a Mac Pro 10.6.8.  I purchased Lion from app store.  Download went well.  Am trying to install but getting an alert that says software cannot be verified.  It may b e corrupted or have been tampered with.  Cannot get past the alert.  Help?