External Monitor for 233MHz iMac?

Happy Thanksgiving to All......
Can an LCD monitor be connected with a Mac to VGA adapter?

Hi WTK
In all honesty I'm not sure but I don't see any reason why not. The VGA socket is inside the computer so you have to get the cable out somehow.
As you've a 233 (Rev A) you should have the little blue panel in to side where all the connectors go. If you remove the panel you will have space to get cable out (but I'm not 100% cetain the the hole is big enough for a VGA connector to get through. If it does get through you will still have a probelm getting to the connector. The hole gives access to the wrong side of the motherboard - plus the VGA socket is on the outside of the Faraday cage.
It would be easier to make a hole the back of the plastic case.
You can test the system without the bottom plastic in place. The computer is quite happy sitting on the bare metal (and you won't kill yourself. (not at first anyway))

Similar Messages

  • MacBook Air with MiniDP as external monitor for 27" iMac

    Hi,
    I just found out, that the new iMacs can be used as external displays for MacBooks with MiniDP.
    Now I'm considering to buy an 27" iMac, but I've one question:
    As my MacBook Air is much slower than an iMac, I was wondering if I could get my MBA (or any ohter MB) in Target Display Mode, with the Command/F2 key combination?
    I know about ScreenRecycler, but I want something that works right out of the box;)
    As you can connect 2 iMacs together and use either one in Target Display Mode, I hope the same will be possible with an iMac and an MBA
    Thank you

    You can put the 27" in target display mode to act as a monitor for the MBair but the reverse is not true. You can't make the MBair a monitor for the iMac 27".
    Regards,
    Captfred

  • 30" Cinema Display as External Monitor for 15" iMac?

    Is there any way to hook up a 30" Cinema Display to a flat-panel "lampshade" iMac? There is no DVI input on the iMac.

    No. There is a VGA output, and (expensive) VGA to DVI converters, but they won't work with a 30" display.

  • External monitor for FCP

    I am looking into purchasing an external monitor for my iMac. The primary use would be to monitor the output of what I am editing in FCP, rather than have it be a secondary monitor (for dual screen editing). Currently my setup is an old 13" tv connected through a canopus converter, but I would like to purchase a flat screen and I am trying to figure out if I need to buy a flatscreen TV or just a flatscreen computer monitor. Hopefully this makes some sense--let me know if I can get away with the monitor instead of a tv!!

    Kim -
    What does the canopus converter offer for outs? Composite? Component? HDMI?
    You are on the right track. How important is it for you to have the BEST, most 'true' picture to view?
    I'm gonna hang out a few people here...
    Some folks insist on running their audio thru crappy speakers just so they can make sure the audio sounds good on run of the mill TVs -- YET insist on having only the finest high quality broadcast adjustable with isolatable blue gun fancy production monitor to CC their media.
    I say hogwash! (kinda)
    Yes, you want a production monitor (for a number of reasons) to best set your broadcast luma/chroma. But are you broadcasting? Don't get something fancy if all you have coming out of the canopus is composite... I'd worry about getting the finest product with what you have first. Then worry about a new mac with a professional video card with a professional product with a professional monitor (audio AND video) setup.
    Help?
    CaptM

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

  • Imac as external monitor for windows Notebook

    Hi,
    I want to switch from my Windows Pc to a mac for private use.
    I prefer the new iMac (2011) 21,5" but I could not get an definite answer (not even in my local apple store) if it is possible to connect an existing Notebook (with VGA Mini-d-sub or DVI connector) to the new iMac in order to use the iMac as an external monitor for the Notebook.
    I definitely need this for my business work in my home-office so this information is vital.
    If ist is not possible I have to take the macMini and stay with my standard monitor.
    Can please someone tell me if it is possible at all and if so, how it can be done.
    I searched the internet and only found out that it was possible with the older 27" model but no information for the 2011 21,5" so please help!
    Thank you in advance for your Support.
    Celindir

    Hi,
    Sorry to say, but ...
    The 2011 iMacs (21.5" and 27") can only be used as a second display via a Thunderbolt-to-Thunderbolt cable.
    The 2009 and 2010 27" iMacs can be used as a second display via a DisplayPort connection.
    http://support.apple.com/kb/TS3775 andhttp://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Stefan

  • Can i use my 21.5" imac as an external monitor for my macbook pro?

    I have a 21.5" iMac (with Intel processor) that I'm trying to use an external monitor for a new Macbook Pro.  Both machines have a thunderbolt input.  I bought a Belkin mini displayport to mini displayport connector, but my macbook is not displaying on the iMac.  I saw videos online showing this done with the 27" iMac, saying you just needed to press Command+F2, but that is not working for me.  I can't seem to find any posts confiming if I can use my 21.5" iMac this way though.

    https://discussions.apple.com/thread/4082303?start=0&tstart=0

  • Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

    Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

    Apple shows only the 27" version supporting Target Display Mode.
    <http://support.apple.com/kb/HT3924>

  • 2012 27" iMac as external monitor for mid-2009 Macbook Pro

    I have a 13" Macbook Pro (mid-2009) with an adapter that I have hooked up to the VGA port on PC external monitors in the past. I just bought a 27" iMac (2012) and was wondering if there was any way to make that an external monitor for my Macbook Pro?

    Welcome to Apple Support Communities
    Purchase a Mini DisplayPort cable and press Command and F2 keys in the iMac

  • Can I use my 24 inch' 2007 imac as an external monitor for my PC

    can I use my 24 inch' 2007 imac as an external monitor for my PC

    No, sorry, you can't. Pre-Thunderbolt iMacs could to this, but with Thunderbolt-equpped iMacs they can only be used as a screen for other Thunderbolt-equipped computers. No company has yet to come up with a converter that works with Thunderbolt Macs. The only way you could get video from a game console into your Mac would be via a video capture device and the inherent lag in such capture would, I think, make most if not all games unplayable.
    Regards.

  • Can i use my 2010 20" imac as an external monitor for my Power mac

    can i use my 2010 20" imac as an external monitor for my Power mac? Sounded like a 'no' a couple years back, but not sure if there are any new adapters out there.

    https://discussions.apple.com/thread/4082303?start=0&tstart=0

  • Is it possible to use an iMac as an external monitor for a MacBook?

    What is the process (if any) to turn off the iMac's system and make it essentially an external monitor for the MacBook?

    No, it's not possible. Your iMac simply does not have a "video in" port for the MacBook's "video out" port. While Mike N. (nahyunil)'s option may give the illusion that you have two monitors, it does NOT turn off the system on the iMac. The iMac must be on and fully functional for that option to work.
    -Doug

  • Can the iMac be used as an external monitor for a MacBook?

    Can the iMac be used as an external monitor for a MacBook?

    What iMac is this ?
    If it is a 2009 or 2010 27" iMac than this http://support.apple.com/kb/ht3924 could apply.
    Stefan

  • Ideacentre B305 as an external monitor for another computer?

    Can I use my ideacentre B305 as an external monitor for another computer?

    Hi l_elephant,
    Unfortunately, no. The MacBook Pro must be on in order to display video and if it's on it'll either be in Target Disk Mode or booting to it's own OS (be it Windows, OS X, etc.) The new iMacs support this feature with a "Target Display Mode," but this feature is not available on the MacBook Pro. +(at this time)+

  • I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

    I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

    In addition to pixel density, you are up against the translation driver card in the TV.
    If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page.  At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
    Mac falls into the top 25% of the page, maxing out at 1366x768 often.  This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
    I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector.  Computer monitor first, TV second.  But the thing is only 27 in.  Good thing TV is not as important to me as it is to others.

Maybe you are looking for

  • Canon ICC profiles and color printing issues

    I use two Canon printers -- an all-purpose MP460 and a iP4000 for photos. I use Canon's Photo Paper Plus Glossy II paper and Canon inks. I print with color management off in the "Print Settings" and by selecting the ICC profile from the drop down in

  • Setting up ringtone

    I have set dashboard to tones.I have purchased ringtones from itunes but they come as songs. I have watched plenty of utube clips on how to convert them to ringtones but i can't get them to work. What am i doing wrong or missing ?

  • SnS-Superuse cant delete video files

    Hello all, Is the following behaviour acceptable? The default SnS superuser account cant delete other user's uploaded video files!!! Instead, the video file must be deleted by the same user! How do you tackle with this? Thank you

  • How to enable "Folio Showcase in Library"?

    http://helpx.adobe.com/digital-publishing-suite/help/whats-new-release.html "If your iPad app offers subscriptions, you likely want to promote your newest content and display purchasing options clearly. To help with this, new v31 iPad subscription ap

  • How do I mirror display wirelessly on MacBook pro or iPad?

    How do I mirror the display of a MacBook Pro or iPad?