External monitor for viewing

right bit of a dilemma
i have a 20" imac alu 2.4 c2d 4gb ram 320gb hdd and attached is a samsung syncmaster 940bw which i have just bought off the cheap from pcworld UK
what i want to do is use the samsung for viewing the video im editing, i know i can drag the canvis windows= over to the ext monitor but thats not what im looking for i want to use it like they do in pro studios so that it shows me the video with a black background safe zones, TC, etc
is there any settings i need to change or do i need extra kit etc any help and advice will be taken
kinda regards
adam

the syncmaster is a computer monitor with VGA inputs and not a PAL video monitor which is what you should have purchsed.
If you have to buy on the cheap, but a flat panel TV with a PAL composite video input and an ability to turn off all the electronic enhancement features.
Best of all buy a JVC preofessional TFT PAL monitor.

Similar Messages

  • External monitor for MacBook 4,1

    Hello all,
    I am wanting to run an external monitor for my old 2008 MacBook 4,1 13"
    I understand that I can run a 1920 x 1080 monitor via my machine.
    However, I don't know the upper size of monitor that goes to.
    I have plugged it into a 40" screen, and the image was not sharp.
    I plugged it into a 23" screen, and the image was sharp.
    I am wanting to know the largest screen I can run, and still have a sharp image
    Thank you for all time, and Merry Christmas everyone.
    Sincerely, Xiao Ping Guo

    The inch dimensions of the screen don't matter. The pixel dimensions, 1920 x 1080, can be sharp enough depending on the viewing distance. What matters is if the number of pixels and screen size are properly coordinated with the viewing distance.
    On a 23" diagonal screen, 1920 x 1080 is about 96 ppi. On a 40" screen, 1920 x 1080 is about 48 ppi, or about half the resolution. The 40 inch screen should look half as sharp as the 23 inch screen, because the same number of pixels (1920 x 1080) is being spread over twice the area.
    If the 23 inch is a desktop monitor, it is meant to be viewed at about desk distance, or about 2 feet. If the 40 inch is a TV, it is meant to be viewed at sofa distance, or about 10-12 feet. If you are viewing a 40-inch TV only a couple feet away, it will seem unsharp because it is not intended to be seen so close. At a normal TV viewing distance, 1920 x 1080 at 10 feet should look sharp enough.
    If you want the 40 inch to be as sharp as the 23 inch than the 40 inch must display more pixels. That's why 4K screens are becoming popular. But the MacBook is at its limit already.
    The reason I originally said the inch dimensions don't matter is that a screen of any screen will look sharp at its intended distance. Your MacBook could drive a 100-foot screen at a stadium at 1920 x 1080 pixels and it would look sharp enough, from the seats. If you're 2 feet from that stadium screen every dot will look coarse and huge, but that's not how close you're supposed to view it.

  • External monitor for HP Omni 10

    what can I use as an external monitor for the HP Omni 10? I have an HP W7072a, will it work?
    This question was solved.
    View Solution.

    Yes, with appropriate adaptor an external monitor can be used with Omni 10. Not sure what is  HP W7072a!
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • External monitor for FCP

    I am looking into purchasing an external monitor for my iMac. The primary use would be to monitor the output of what I am editing in FCP, rather than have it be a secondary monitor (for dual screen editing). Currently my setup is an old 13" tv connected through a canopus converter, but I would like to purchase a flat screen and I am trying to figure out if I need to buy a flatscreen TV or just a flatscreen computer monitor. Hopefully this makes some sense--let me know if I can get away with the monitor instead of a tv!!

    Kim -
    What does the canopus converter offer for outs? Composite? Component? HDMI?
    You are on the right track. How important is it for you to have the BEST, most 'true' picture to view?
    I'm gonna hang out a few people here...
    Some folks insist on running their audio thru crappy speakers just so they can make sure the audio sounds good on run of the mill TVs -- YET insist on having only the finest high quality broadcast adjustable with isolatable blue gun fancy production monitor to CC their media.
    I say hogwash! (kinda)
    Yes, you want a production monitor (for a number of reasons) to best set your broadcast luma/chroma. But are you broadcasting? Don't get something fancy if all you have coming out of the canopus is composite... I'd worry about getting the finest product with what you have first. Then worry about a new mac with a professional video card with a professional product with a professional monitor (audio AND video) setup.
    Help?
    CaptM

  • Can an iPad be used as an external monitor for DSLR video?

    I am looking at purchasing an external monitor for my DSLR to assist with shooting video.
    If I was to purchase an iPad, would I be able to connect it as an external monitor for live view while shooting video?
    If it is at all possible then I'll definitely be purchasing it because that way I can have a number of uses for it and save money at the same time!

    No.
    iPad cannot be tethered to a camera.

  • How do I use my late 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output.

    May be this question has been asked thousand times. how do I use my mid 2011 iMac ( with thunderbolt) as external monitor for laptop/Xbox or other device with hdmi as output. if apple hasn't removed that feature and has just moved that functinoality to thunderbolt then how can I use it. currently there is no laptop available with thunderbolt output. no 3rd party converter available. whats the use of having feature on latest functionality if we cant use it. I wish they would have made one port has mini-dvi and other thunderbolt for backward compatibility untill some vendor comes up with converter.

    It Says :
    Mac (21.5-inch, Mid 2011) and iMac (27-inch, Mid 2011) and later computers support Target Display Mode via Thunderbolt to Thunderbolt cable (2 m) when the source is another Thunderbolt-equipped computer.
    Name one computer model/vendor which has thunderbolt as output for display + audio. this is so stupid to move to new technology without availbility of its compatible devices.

  • I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

    I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

    In addition to pixel density, you are up against the translation driver card in the TV.
    If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page.  At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
    Mac falls into the top 25% of the page, maxing out at 1366x768 often.  This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
    I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector.  Computer monitor first, TV second.  But the thing is only 27 in.  Good thing TV is not as important to me as it is to others.

  • Imac as external monitor for windows Notebook

    Hi,
    I want to switch from my Windows Pc to a mac for private use.
    I prefer the new iMac (2011) 21,5" but I could not get an definite answer (not even in my local apple store) if it is possible to connect an existing Notebook (with VGA Mini-d-sub or DVI connector) to the new iMac in order to use the iMac as an external monitor for the Notebook.
    I definitely need this for my business work in my home-office so this information is vital.
    If ist is not possible I have to take the macMini and stay with my standard monitor.
    Can please someone tell me if it is possible at all and if so, how it can be done.
    I searched the internet and only found out that it was possible with the older 27" model but no information for the 2011 21,5" so please help!
    Thank you in advance for your Support.
    Celindir

    Hi,
    Sorry to say, but ...
    The 2011 iMacs (21.5" and 27") can only be used as a second display via a Thunderbolt-to-Thunderbolt cable.
    The 2009 and 2010 27" iMacs can be used as a second display via a DisplayPort connection.
    http://support.apple.com/kb/TS3775 andhttp://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
    Stefan

  • Can i use my 21.5" imac as an external monitor for my macbook pro?

    I have a 21.5" iMac (with Intel processor) that I'm trying to use an external monitor for a new Macbook Pro.  Both machines have a thunderbolt input.  I bought a Belkin mini displayport to mini displayport connector, but my macbook is not displaying on the iMac.  I saw videos online showing this done with the 27" iMac, saying you just needed to press Command+F2, but that is not working for me.  I can't seem to find any posts confiming if I can use my 21.5" iMac this way though.

    https://discussions.apple.com/thread/4082303?start=0&tstart=0

  • Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

    Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

    Apple shows only the 27" version supporting Target Display Mode.
    <http://support.apple.com/kb/HT3924>

  • External Monitor for Macbook Pro (Use for Audio)

    Hey
    Well I have a Macbook Pro and am looking to get an extra monitor because I am an Audio Production major and need the space.
    I'm looking for about 20-22 inch range and maybe one that swivels so it is horizontal or vertical.
    Please let me know what you think.
    Thanks
    Ryan

    Be very careful what you buy, and if at all possible test it with the computer before you buy it. A few times. These things just stop detecting external monitors for no reason sometimes, as well as just refusing to ever detect certain monitors.
    Maybe someone here has a set-up that's working for them, that's your safest option.

  • External monitor for Macbook Pro MC723

    Hi, I'd like to get a cheap (<£200) external monitor for my Macbook Pro MC723 ...
    1. Can I get any make of monitor or does it have to be an Apple?
    2. Which port Macbook Pro port would it connect to?
    3. Will I be able to use the monitor as a dual display, along with the macbook's screen?
    4. Do you have any recommendations?
    Many Thanks.

    1. Pretty much any make. Some monitors are MUCH better than others. Generally speaking, you get what you pay for. There may be other monitors as good as Apple's 27" models, but I've never seen one better.
    2. The Thunderbolt port.
    3. Yes.
    4. Apple Thunderbolt display.

  • External Monitor for MacBook Pro 13"

    Hello, I know there has been a number of threads on this topic, but I haven't found my answer yet.
    I am looking for a third party external monitor for my 13" MacBook Pro. I read a lot of text on my computer so it is important that the text is sharp. I have tried a couple Samsung monitors so far and the text is far from sharp and in fact it is outright hard on the eyes.
    Currently, I am using a 23" Samsung SyncMaster SA550 with a HDMI/MiniDisplay 6" cable, I am using it as the primary display with my laptop closed and the resolution is set to 1080p. It's almost as though the video card is not powerful enough to drive this monitor - is that possible?
    I have two questions:
    1) Is there anything I can do to get this monitor to display clearer text?
    2) Can anyone recommend a monitor that would display clearer text?
    Thanks! Any info would be appreciated!

    The only reason I thought of suggesting 1920x1080 was becaue I looked up the specs on your 23" Samsung SyncMaster SA550 and see it only has vga and hdmi input.  I suspect that because it's hdmi input the EDID info tells Displays to add 1080i and 1080p to the resolutions and suppresses the 1920x1080.  It's why I wasn't sure it would be there in the first place.
    So have you tried 1080i just to see what kind of results you get?  And to cover all possibilities have you tried using the VGA connection?
    It may just be that what you see on this particular monitor is as good as it gets.

  • 2012 27" iMac as external monitor for mid-2009 Macbook Pro

    I have a 13" Macbook Pro (mid-2009) with an adapter that I have hooked up to the VGA port on PC external monitors in the past. I just bought a 27" iMac (2012) and was wondering if there was any way to make that an external monitor for my Macbook Pro?

    Welcome to Apple Support Communities
    Purchase a Mini DisplayPort cable and press Command and F2 keys in the iMac

  • IPad as external monitor for FCP7?

    Is it possible to use an iPad as external monitor for FCP7?  if so, how do you set it up.  Thanks!

    This might be interesting: http://avatron.com/apps/air-display
    YouTube vid: http://www.youtube.com/watch?v=rvtfv4gljDA

Maybe you are looking for

  • Storage location and post.chge storage location not in the same warehouse

    Hi All, We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle

  • IPod Touch, iOS 4.0 Update, Error 9, Error 20, Slow Sync, Sync Problems

    After wasting a week troubleshooting several problems with two iPod Touch 2Gs, I have come to this conclusion. If everything is working correctly on your iPod Touch under iOS 3.1.x, *DO NOT UPDATE TO VERSION 4.0*!!! Apple will not take any responsibi

  • How to get the details of the document uploaded at the catalog area header?

    Hi, Can someone explain how we can get the properties(guid class etc) of the uploaded document by using the details of the catalog area (guid)?. Do we have standard FMs available to fetch the required information? Please assist. Regards, Vaibhav

  • Can't set ACL for JSPs

    Hi,           we are trying to set define ACL for weblogic security for JSP           and could't manage to do it. In the online documentation there           are examples for servlets but not for html or jsp files.           How have to be defined t

  • Can hear audio, but no video in bridge cs5

    Hi guys, please help. when i play the .mov format in primere PRO CS5,i can both hear and see the videos........ but when i try to browse in the bridge cs5, than i can only hear the audio, but i cannot see the video? By the way i am on win7 / 64bits p