External Monitor: Is this even possible?
I want to color correct using an external monitor. My set up is mini DVI out to VGA to S Video. Everything I've read, people get their video out by firewire to tape deck to monitor. Is my set up possible?
Your setup won't get you proper color. Because that DVI out is sending an RGB signal, NOT the original YUV signal. You either need to route thru a camera or deck via firewire (or ADVC-300).
Shane
Similar Messages
-
Is This Even Possible? eDirectory syncing passwords with external RADIUS servers.
We are currently have a solution that allows us to use a campus RADIUS
server as the authentication mechanism for accessing the Internet. We want
to integrate this so users can authenticate with their campus IDs but gain
access to the Novell server (home directory and printing) using the same
information.
Is this even possible?
So, essentially, we would like the external RADIUS' user/password data to
be synced with the eDirectory data, but have the eDirectory receive updates
from the RADIUS (or LDAP, Kerberos or whatever system is necessary). Or is
an all-Novell solution the only possible way to use RADIUS authentication?
Any input would be greatly appreciated.
-=BryanHi Bryan,
As jim said, you can use idm to do this, but another option for you
might be to use somthing like freeradius and point it back to
edirectory as its authentication source.
Cheers,
Steve
On Thu, 23 Feb 2006 15:50:11 GMT, [email protected] wrote:
>Michael,
>
>Thanks for the info. I really wasn't sure where to post this question. I
>really wasn't sure if I needed to be using Novell's RADIUS server or not to
>do this. Reading the online docs didn't really help me to know which
>solution or solutions to choose.
>
>-=Bryan
>
>> [email protected] wrote:
>>
>> > Is this even possible?
>> >
>> > So, essentially, we would like the external RADIUS' user/password data to
>> > be synced with the eDirectory data, but have the eDirectory receive updates
>> > from the RADIUS (or LDAP, Kerberos or whatever system is necessary). Or is
>> > an all-Novell solution the only possible way to use RADIUS authentication?
>>
>> What you want should be possible with Novell Identity Manager (formerly
>> DirXML) product. This particular forum is for help with the NetWare
>> Radius server, which would not factor into what you are trying to
>> accomplish... you have a non-Novell Radius server that you want to sync
>> eDirectory information with, and that is the realm of identity manager.
>>
>> As to the "hows", you might as in the nsure-identity-manager group here.
>>
>> --
>> Jim
>> NSC SYsop -
How is this even possible? Folders out of sync. Backlog command says in sync.
Two 2008 R2 servers. Been running DFS-R for about a year now. Generally no problems.
If I run the DFSRdiag backlog command on either server, for one particular folder, it says there is no backlog. The only problem with that is; on one server there are 11 files in that folder, on the other server, in the same folder, there are
15 files. How is this even possible!Hi,
Please check if DFS Replication filter some special file from replication. For more detailed information, please refer to the article below:
Exclude files or subfolders from replication
http://technet.microsoft.com/en-us/library/cc758048(v=ws.10).aspx
If the issue still exists, please create a Diagnostic Report to see if there is any error message.
Create a Diagnostic Report for DFS Replication
http://technet.microsoft.com/en-us/library/cc754227.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I would like to share my photo's titles and descriptions in the photo streams into which I place these carefully labeled photos. I do this so clients can see the names of the things they're swiping through. Is this even possible?
No. Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
OT -
I'm no lab geek but I thought I had a 1st gen IPad. Was having difficulty downloading. Went out bought a new ipad3. Took my gen 1 to Apple store and it's running IOS7. Is this even possible???
http://en.wikipedia.org/wiki/IPad
Dope, I deleted link as I pressed add reply. -
New iMac user here, I recently bought a new iMac and Time capsule and have the whole network up and running now. I have connected another external HD to the time capsule as well and have a total of 3 TB of storage connected wireless to my new iMac. My question is can I use this location as the default location for iTunes? I doubt I am gonna run out of room considering the iMac has 1 TB of storage already, but I'd prefer to keep my movies and music off the Mac to keep it running smoothly. If this is possibly, I'd like to do this with iPhoto as well.
I would advise against placing your iTunes library on a Time Capsule.
The Time Capsule is designed as a backup device and not for wireless streaming of video.
Before you do anything more, can I suggest you put into place a reliable, redundant backup strategy.
Unless you are prepared to risk loss of your iTunes library due to a hard drive failure, I would not put iTunes on the Time Capsule.
Leave your iTunes library on your iMac until such time as your internal drive is full. Backup to Time Capsule using Time Machine and create a clone of your internal iMac HD to your external drive.
That's my 2 cents worth. Others may have a different opinion. -
Display only on external monitor with laptop open--possible?
I have an external monitor (20" with resolution of 1680 x 1050) attached via DVI-D to my MacBook Pro 15". When I'm using it in this configuration, I like to only use my external monitor and not the built-in laptop display. The only way I can get this to work is to close the laptop screen and then wake up the computer using an externally attached (bluetooth, actually) keyboard.
My question is, how can I do this and have my laptop screen open? Whenever the laptop screen is open, its built-in screen activates and I can either "mirror" the displays or have display spanning. Mirroring does not work well for me because the external monitor's native LCD resolution is 1680 x 1050 and the laptop is 14xx by something (I forget the number).
Why do I want the screen to be open? Better airport and bluetooth reception. My external monitor is far away enough from the laptop that sometimes, the bluetooth mouse gets jittery when it tracks.
Thanks for the help!How about turning the
brightness on the MBP all the way down? Will that
achieve what you want?
Kryten
Well, that means using monitor spanning. In that case, I could certainly make my external monitor the main display (thus, the one with the menu bar). The problem with monitor spanning in my situation is that it is possible windows and icons be mis-located to the laptop monitor. Because my two displays are not sitting side-by-side (they are at least 5 feet away from each other) this could get confusing. -
Computer crashed, need to get music off my ipod onto new harddrive. Is this even possible anymore?
My computer crashed and I got a new hardrive. I need to get my music off my Ipod Touch 4th gen onto my new computer...is it even possible anymore?
For iTunes purchases:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
For other music you need a third-pary program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities -
Is this even possible with Bridge?
I do alot of work with Photoshop and some other products but am new to Bridge. I've been tasked to use Bridge to find a specific type of TIFF file that is being generated by one of our legacy patient record systems. It isn't in a standard TIFF format but some type of 8BPP format.
Is it possible to use Bridge to find these type of files in a directory and search all subdirectories (about 500)?
Any help would be really appreciated as I don't even know where to start.
Thanks!It depends if that information is entered as a metadata point. Click on picture and see if that has specific data in the metadata tab. Also check the metadata in preferences to see if you have checked this data to be displayed.
If so I believe you can search the "all metadata" in Find. Type in the appropriate fields in search boxes. -
Is this even possible with a selectManyCheckbox???
I know I can do one of two layouts with a selectManyCheckbox, line or page. I would like to have the checkboxes go horizontally i.e. line, but after x number of them, say 5, I would like to start a new row rather than scrolling off to the right... I see that a selectManyCheckbox actually renders an HTML table so I tried to use the pass-through attribute "cols" to set it but no dice. Anyone have any idea how to do this or even if it is possible?
I would say that you would have a device at the dsl first then connect everything else up that is needed. It would have to be wired to the dsl.
-
Is this even possible...if so advice??
Hi Everyone,
So I need to tap into the great knowledge of others on here and see if anyone has either some advice or maybe recommended resources to check on this question.
I am setting up a small business with a Mac Mini Server and my client asked me if there was anyway to set it up to have basically a redundant server going that would take over for the main one should it go down to something that required repair, like a logic board issue.
I know in large enterprise situations they have server farms setup and you can configure a setup that monitors the other units and will setup to the plate if that unit goes down automatically.
I know Snow Leopard Server doesn't have anything built-in (to my knowledge) that makes this happen, but does anyone have an idea of if/or how I could accomplish this? Say if I had one Mac Mini Server as the main unit and the second one waiting in the wings so to speak. I figured an easy way just to have a cloned unit sitting there, but it is the whole automatic aspect.
If anyone has any suggestions, advice or resources I can dig into I would really appreciate it. I would also appreciate if your response is they are bat sh*t crazy and there is no way to do this without stepping up to Xserve-land.
Thanks!I know Snow Leopard Server doesn't have anything built-in (to my knowledge) that makes this happen
Fortunately, you're mis-informed.
Mac OS X Server has had automatic failover abilities for some time now.
You'd need two machines and each one listens for a heartbeat from its partner system. If the heartbeat fails it's assumed that the other system is offline and the failover daemon starts up whatever services you have configured to failover.
The three main issues are:
1) implementing a heartbeat network between the two machines (ideally on a separate network link, which could be FireWire)
2) determining which services should failover (it's unlikely that you need/want all services to failover since there is a cost of failover (and an even bigger cost of fallback))
3) Managing common storage elements - how to make sure both machines have the same content. For example, if you determine that you want to failover your web server you need to make sure that both machines have access to the same web content, otherwise your site will look different in a failover situation. This grows exponentially if you have a dynamic, database-driven web site since you need to consider database replication as well.
Note that 3 may be partly solved via network storage that's accessible to both machines, however you need to consider the case where the network storage fails... -
Shared services security- Is this even possible?
I want to know if the following is possible using shared services security:
I want to set up an MSAD group that will have say 50 sub groups.
I will define this super group as an external directory in SS.
I will then assign security (both roles and filters) to each of the 50 sub groups.
There will be no groups or users in the native directory.
Based on user needs, the MSAD team will move users from one subgroup to another without logging into Shared Services.
My expectation is when they move the users from one subgroup to another, the user will have the security of the group they were moved to.
Is it possible to set up security this way in shared services? I have been experimenting and having a miserable time getting it to work. So just wanted to know if I am doing something wrong or just wasting my time.I think this will work, but note that you are not really using SS inherited security.
What you might do is something like this:
MasterGroup <--Assign provisioning here
|_Subgroup1 <--Assign filter
|_Subgroup2 <--Assign yet another filter
|_Etc.
With the above layout you define provisioning roles once at the topmost group (MasterGroup) and then assign unique security at the subgroups. The users are in the subgroups and their usernames will go to their ids (which will have no provisioning), then their immediate group (ditto), and then the parent group (which will).
What you have defined for security (as opposed to provisioning) sounds good to me although I have never tried to do this with MSAD groups. I don't see a reason for it not to work.
Regards,
Cameron Lackpour -
Google Calendar (gCal) and the iPhone - is this even possible
Is it possible for me to configure gCal to work with the iPhone Calendar application? Are there any restrictions (I.e. view only, etc?)
Much thanks in Advance!
-SigYou can do it, it takes a bit of work.
(THESE INSTRUCTIONS ARE USEFUL IF YOU HAVE AN APPLE COMPUTER!)
I did it like this -
I have a Mobile Me account, so my iPhone calendar syncs automatically to Mobile Me.
I have iCal on my iMac desktop machine set to sync with Mobile Me also.
(So, so far, my iPhone and desktop iCal always match)
THEN: Use Spanning Sync - this is a 3rd party app that you install on your computer. It allows you to sync in both directions (to and from) Google Calendar.
You just give Spanning Sync the info about your Google Calendar, and it syncs it with the iCal on your computer. Then MobileMe syncs your computer with your iPhone. It works great, because I can put things onto my iPhone calendar, and they'll show up on my work calendar and my home calendar, so my family AND my coworkers can keep abreast of my schedule, and even update it for me if necessary! (Every now and then I'll get a new calendar appointment that says "2:00pm today: Buy chocolate for your wife"!)
Hope that's useful! -
Complicated Sumbit Button Needed - Is This Even Possible?
I have created a fillable form that, once filled, must be printed to gather required (various) signatures. I need to create a submit button to include with the Print button that with send an (prepopulated) email notification to the Director. The email will need to contain the first four fields filled in. How would I go about scripting the submit button to do this?
Also, is there a way to create this button so that it sends ONLY the selected fields and not the entire PDF/XML data?
Even further, though not as urgent, is it possible to validate the Print button so that the form will NOT print unless the submit button has been clicked?What you are explaining is possible to do. I have designed a number of forms where I have consolidated many documents into one PDF. In order to do this to offer the best user experience for those filling the form out you have to understand the company's requirements. Are they wanting one PDF form which a user can select from a dropdown or radio button the type of form they want to fill out. Do they want a design in which the customer can fill out different forms in the same pdf and then email the final results back to the designated email address?
#1 If all they want to do is add have the form accessible via their website they just need to add the pdf form to a site page or set a link to the location of the pdf of the server.
#2 When using the mailto function what script language are you using? FormCalc or JavaScript? Beyond this, are they wanting a filled in PDF form returned via email or just the data which can be passed back to the company via XML script in the email?
#3 I don't like to incorporate digital signatures into the documents I create unless I know how they plan to use the forms and if the company's legal department approves a digital signature as opposed to liquid. The best thing you can do is check with the company's legal department to see if a digital signature on the forms you are creating is acceptable for these types of document.
#4 You had the right idea with the email button but you also need to Reader Extend the PDF form but the company or you (depending on who Reader Extends the form) needs to be aware of the licensing agreement for Reader Extensions unless one is purchased which can become expensive.
#5 As far as the forms you pulled off the Governments website, you need to create your own version of the form and incorporate into the single consolidted form you are creating.
Best of luck on this project.
J Black -
:( i think i might want to return my macbook, is this even possible??
I recently got my macbook and was so impressed, the finish, the build quality, even the way the wires connect! It truely is class.
My problem? I get headaches using it! I have used pc's, played games, working on poor flicking monitors and never had headaches but for some reason the macbook gives me them!
Not sure if it is with the screen or the fact i am keep having to move the screen to get best view(when working back and forward - told the macbook pro doesnt have this problem?) but it is really gutting.
So question - I obviously opened and used it - do apple take returns or do i have to flog it on ebay or try and get use to it?
ThanksYou can return it within 14 days. There is typically a 10% restocking fee... which would likely be less than you would lose by selling it on eBay. Sometimes they waive the fee... but that's completely up to the store and is certainly not guaranteed. Their official policy is a 10% restocking fee. If you let them know why you're returning it, they may be more inclined to waive the fee... but there's no way for us to know.
If it's more than 14 days... you'll need to find another way of getting rid of it. If you're just over that 14 day period, they have sometimes been known to accept returns... but again, that's not policy and it's at the stores discretion.
A number of people have reported a similar problem which is thought to be related to the LED backlighting and the way it dims. LEDs can either be on or off... so they basically fake being able to dim by blinking at very high rates. If you put the brightness all the way up, the LEDs are on full time. You may want to try this to see if it helps out if you'd really like to keep it.
Maybe you are looking for
-
Is there a way to open new tabs in the home page or some other link?
When I open a new tab using the "+" symbol I get a blank page. I would like new tabs to open in my home page, or, if possible, a different page, like my favorite web browser, which is what I usually want when I open a new tab. Can this be done? I can
-
Where is autodownload link for JRE Version Build 1.5.0_09-b03?
http://java.sun.com/javase/6/docs/technotes/guides/deployment/deployment-guide/autodl-files.html I realize I can put the link in object tag so that user can actually go and download the require JRE from the website. But I am not too sure where is the
-
Hi all, I am facing problem with COMMIT WORK in my STANDARD SAP modification for executing ABAP Proxy. The problem is that the program doesnt continue after COMMIT WORK (messages, screens), but return to the initial screen. Is there any way to commit
-
My line-in does not seem to be working. My built in mic is working, and when I plug in / unplug my headset, I can watch it pop in the Sound Preference Pane, but after it is plugged in, it doesnt work. The puzzling thing is that it works on other comp
-
I've installed a few recommended add-ons, but haven't seen a correlation to the download failures. Program downloads fail almost every time I attempt them. Don't know if this is associated, but pdf screens are often blank.