External Monitor Mask Manipulation Problem

Hi all,
Love the fact that Speedgrade CC 2014 now supports blackmagic I/O cards. I run the UltraStudio Mini via TB and then SDI out to Flanders BM210 Ext. Monitor.
Everything is groovy until I need to adjust any mask with the widget tool. Once I click the mask, it appears on the ext. monitor but the mouse doesn't switch over to it so I cannot manipulate it!
Anyone experiencing anything like this ?
Thanks

This may be a problem with your mouse settings ... does that mouse have the ability or 'permission' to normally go onto that monitor?
Personally, I've got a Wacom pen-tab for the left hand ... a Microsoft "ergonomic" keyboard with a ton of extra programmable keys I'm STILL trying to finalize what I'm doing with for "shorts" ... and on the right, a Kensington Expert Mouse trackball: 2" track ball surrounded by a ring and four large pad-buttons. I want the proportions of the pen-tab to be set for my main monitor when I'm working on most things ... so it's set to "see" only the main monitor. My trackball is set to use both monitors, so for widgets that's what I use.
I'd check your mouse control panel first ...
Neil

Similar Messages

External monitor causing playback problems?

Sorry if this has been covered before. I tried searching but it kind of comes down to what verbs people use to describe the problem.
I'm running FCP 5.1.4 on a Macbook Pro, and I just bought a Dell 2408 for an external monitor. A few times since I've hooked up the monitor, when I play in the timeline, the video skips and stutters and keeps looping back to the same section. If I switch to a different sequence, it plays fine. This only seems to happen when I have the cinema preview on. If I kill it, click on the canvas window and hit play, it usually plays fine.
So I've got some workarounds on this, but it's an annoying quirk. Has anyone else had this problem? It seems to be tied to the external monitor, but I don't know if I'm missing a step or something isn't setup quite right.
Any thoughts or help is greatly appreciated.

Go to your Audio / Video Settings >> A/V Devices tab and turn of "Mirror on desktop" for Playback ... this will reduce the load on your system as it will not be trying to decode the video for two separate (and different) playback streams simultaneously ie when using Digital Cinema Desktop Preview to display All Frames then you will not see playback in the Canvas window as well, just on the external preview monitor.
And/Or you could also try setting FCP's System Preferences >> Playback Control >> Gamma Correction to "Approximate" ... according to the manual this can offer a little performance boost (but to be honest I haven't ever tested this).
Choosing Real-Time Playback Gamma Correction Options
Whenever you watch your video on a computer display (such as video displayed in the Canvas, the Viewer, or via Digital Cinema Desktop Preview), Final Cut Pro applies gamma correction to the video to more closely approximate the way it would appear on a video monitor.
Note: Gamma correction is not applied to external video outputs such as DV or third-party interfaces because this correction is inherently applied by external video monitors.
If your computer’s graphics card supports gamma correction, Final Cut Pro automatically uses the card for accurate gamma correction. If your computer has an older graphics card that does not support gamma correction, you have two gamma correction options in the Playback Control tab of the System Settings window.
Accurate: High-quality gamma correction. This option is the most accurate but also requires the most processing power.
Approximate: Lower-quality gamma correction. This option leaves more processing power available for real-time effects but results in less accurate color and brightness rendition.
Tip: If your real-time performance is limited, try changing the gamma correction setting to Approximate (if available).
Hope it helps
Andy

External Monitor (Dell u2711) problems

Hi all,
I'm an editor and just bought a Dell u2711 to hook up to my MacBook Pro (2.53 GHz, 4GB Ram, NVIDIA GeForce 9400M). The DVI would only support up to 1920x1280 so I bought a mini DisplayPort to DisplayPort adapter and that got me up to my full resolution for the monitor.
HOWEVER... my computer seems to be too slow or the graphics card isn't good enough to support such a monitor. Is this true? When I use the external monitor as extra desk space and put all my FCP windows in it I get this banding on my subjects when they move. It just looks like very slight glitches and the movement isn't displayed so smoothly. I'm working with 1080p ProRes 422.
When I try and use the Dell u2711 as an external video monitor (display all frames) it lags pretty bad and the motion is stuttery and not showing in smooth motion.
Please help. Would I have been better off with the 27" Cinema display? I thought they were pretty similar monitors. Is my laptop or graphics card not up to the task? Just last Nov. or so I got this laptop with what I thought was the best available graphics card Apple had at the time for this laptop.

Go to your Audio / Video Settings >> A/V Devices tab and turn of "Mirror on desktop" for Playback ... this will reduce the load on your system as it will not be trying to decode the video for two separate (and different) playback streams simultaneously ie when using Digital Cinema Desktop Preview to display All Frames then you will not see playback in the Canvas window as well, just on the external preview monitor.
And/Or you could also try setting FCP's System Preferences >> Playback Control >> Gamma Correction to "Approximate" ... according to the manual this can offer a little performance boost (but to be honest I haven't ever tested this).
Choosing Real-Time Playback Gamma Correction Options
Whenever you watch your video on a computer display (such as video displayed in the Canvas, the Viewer, or via Digital Cinema Desktop Preview), Final Cut Pro applies gamma correction to the video to more closely approximate the way it would appear on a video monitor.
Note: Gamma correction is not applied to external video outputs such as DV or third-party interfaces because this correction is inherently applied by external video monitors.
If your computer’s graphics card supports gamma correction, Final Cut Pro automatically uses the card for accurate gamma correction. If your computer has an older graphics card that does not support gamma correction, you have two gamma correction options in the Playback Control tab of the System Settings window.
Accurate: High-quality gamma correction. This option is the most accurate but also requires the most processing power.
Approximate: Lower-quality gamma correction. This option leaves more processing power available for real-time effects but results in less accurate color and brightness rendition.
Tip: If your real-time performance is limited, try changing the gamma correction setting to Approximate (if available).
Hope it helps
Andy

External monitor = cinema display problem

Hi All - new to the iMac, looooong time Mac user. So I had a 20" cinema display plugged in to my G4 before getting the iMac and now I am using it as a 2nd monitor (extended desktop). Love the added real estate!
My problem is this - if I plug my keyboard into the USB ports on the cinema, the iMac doesn't 'see' it. Yet if I plug my iPod cable into the FW400 ports it shows up fine and syncs with iTunes. Also, the keyboard WAS working plugged into the cinema display for a few days, but I had to unplug it and when I plugged it back in, no joy. I have restarted with it plugged and unplugged, repaired permissions (not like that'd help) and zapped the PRAM. Under System Profiler, the iPod will show up under the Firewire tab (as does the cinema display) but the keyboard does not show up under the USB tab.
So, can I 'force' the iMac to 'see' the keyboard? Any help will be appreciated and rewarded!

So the end that plugs into the Cinema Display splits a couple inches from the end into FW, USB, and DVI. What about the end that plugs into the iMac DVI out? Are there 3 ends to that as well? If so can you just unplug the USB portion of that cable from both the iMac and the Cinema Display and use a completely seperate cable to hook up the USB?

10.6.8 update: screen brightness issues when hooked to external monitor

I just upgraded to MacOS 10.6.8 yesterday, and since then, the screen on my Macbook is acting strange.
I'm hooked up to an external monitor which I use almost all the time as the primary monitor. Usually, when I'm using the external, I turn the brightness all the way down (to black) on the Macbook. After the update, however, the Macbook seems to have a mind of its own. The screen gets brighter, then dimmer, then brighter again, without reason. Or, othertimes, after about 30 seconds of inactivity, the Macbook screen gets brighter, then when you move the mouse, it goes back to black again.
It's not that I care so much, but just wish I knew what was going on. Glitch in the new software?
Macbook
MacOS 10.6.8
External monitor: ViewSonic VA2231wm

Same problem here with a MacBook Pro. I have the notebook connected to a Cinema Display and thus manually dimmed down completely my MacBook Screen. Now after updating to 10.6.8 my MacBook screen dimms up at the time when it would normally dimm it down if the screen was "enabled".
I tried several steps to fix that:
- Dis- and reconnected my external Cinema Display.
- Changed display and energy safer settings in system preferences.
- Fixed file permissions.
- Did a PRAM-reset.
Nothing helped.
Please help us!

2 External Monitors with the T430s with Intel HD4000

I have read several multiple monitor threads but could not get a clear solution to this.
Model: I have a T430s with Intel HD4000 graphics.
Desired set up: 2 External Monitors + Lenovo LCD
Problem: It seems that I can only drive one external monitor. I'd like to drive two external monitors, as I did previously with my T420.
What I've tried: I have a dock and have tried VGA + DVI for the external monitors, as well as DVI + DVI. Neither setup has worked. It always greys out the third monitor in the Windows Display options.
Any thoughts on how to drive two external monitors with the T430s? Clarity is appreciated. Thank you!

RobertWerner2 wrote:
If I'm reading the link you provided correctly, can I correctly assume that I CAN connect two external displays with just the W520 Laptop and NO docking station?
I tested this today. You can connect two external displays (1 VGA, 1 DisplayPort) without a docking station. The result is 3 independent displays - the ThinkPad LCD, the VGA monitor, and the DisplayPort monitor.

X200 External Monitor -- In High Resolution, Tablet Pen Won't Work

I have an X200 Tablet running Windows 7 and need everything I write on the tablet with the digital pen to be simultaneously visible on an external monitor. The problem is that when using both monitors simultaneously, the X200 will only display on the external monitor at the X200's maximum resolution (1280x800) even though the external monitor can go to a higher resolution (1680x1050).
I've tried the Ultramon app, which allows the Tablet and external monitor to both be at their max resolution (which is my goal) but then the digital pen won't work on the Tablet.
Any thoughts on a solution?

• Went to Best Buy
• Paid for a DYNEX Mini DisplayPort to HDMI Adapter ($25)
• Came home and plugged in the adapter then the HDMI to DVI cable to the monitor. (Note: Monitor is a LG Flatron L22WTG) - DID NOT WORK
• iMac knows monitor is plugged in and I can change the resolution on both monitors and mirror. (Note: Changed to every resolutions with/without mirror image.) - DID NOT WORK
• Restarted computer - DID NOT WORK
• Turned off/on LG monitor many times - DID NOT WORK
• Unplugged/plugged back in many different ways - DID NOT WORK
• Changed the HDMI to DVI cable with a better cable - DID NOT WORK
• Installed BootCamp with Windows 7 - *BOTH WORK 100%*
• Rebooted to OS X 10.6.7 (Snow Leopard) - DID NOT WORK
• Installed Windows XP - *BOTH WORKED 100%*
• Reinstalled OS X 10.6.4 (Snow Leopard) - *BOTH WORKED 100%*
• Updated OS X from 10.6.4 to 10.6.7 - DID NOT WORK
Seems to be a driver problem with the new update (10.6.7). I will not update again till drivers are fixed.

External monitor in boot sequence

Hi all,
i have a hp dv6000 laptop with a busted monitor.. so far, i had managed to get by using an external monitor. but the problem is, the external monitor only works when windows loads up..
how do i 'force' the laptop to detect the external monitor during boot sequence, especially now when im trying to reformat the laptop.
i know you have to press f11 during start up but if i cant see anything. the external monitor will only start detecting during windows login screen.
help..

I have a HP Mini 1000 and I am having the exact same problem. I think I need to change a BIOS setting, but I can't see anything since the LCD was broken, and I completely removed it. I can see when Windows starts, but I need to see the boot so I can install a new operating system. Does anybody know the BIOS sequence key by key so that I can do this blindly? I can get in with F10 as Windows does not start when I am in the this mode, so I am definitely in the BIOS.

MacBook Pro will not run my external monitor

My External monitor will not come on with my MacBook Pro after I installed Mountain Lion. I get the wallpaper but that is all. Any ideas? I have been running the Mcbook Pro with the cover closed with the external monitor, with no problems up until I installed Mountain Lion.

My hard drive is now connected. But Time Machine will not let me select the hard drive as my back up drive. This hard drive was used on another Macbook, so Time Machine doesn't seem to recognize the hard drive on the new one. Do I need to reformat the hard drive? I hate to do that because I have the previous backups on there.

Display size external Monitor

The resolution of the YOGA 13" display is that high, that one has to use 200% size in Windows 8.x. If I connect to an external monitor with HD resolution this is to big. I have to change it and make a re-login. This is very time consuming and annoying.
How can I resolve this problem?

Ya, that's going to be an issue. The Mac (when set not to mirror) will think you're wanting to use that extra monitor as extra space (i.e. extends the desktop onto it). In mirror mode, the resoluton MUST be matched on both (I think it's a limitation of the OS because I can do this all day long on Windows). The only other solution would be to hook up multiple monitors and a physical keyboard/mouse so that you can close the clamshell and use just the external monitors. Don't quote me on this, but you may be able to mirror at that point across two external monitors. The problem comes into play when you try to do that along with the built-in laptop display.

My MBP Retina gets very confused when I plug in/unplug external monitors. Is this normal?

I've noticed my MBP Retina is more easily confused than my old MBP when using external monitors.
The problems occur after unplugging from an external monitor. Unless I actually re-start the computer, the resolution in some apps (e.g. Safari) fails to revert to retina quality. I am often left with the toolbar and windows so far off the laptop screen that it is impossible to reach them and the OS is unusable (have to restart). And just now the machine went into a strange fit where it kept powering on and off the displays every few seconds, apparently unable to decide what mode to be in. Again, I had to restart.
Is it normal to expect that I would have to restart the machine when moving between external monitor/laptop only combinations?
All these effects are fairly intermittent (although very frequent) so could be hard to reproduce at the Genius bar.

*there comes (i was mixing up english and german spelling without noticing )

[solved] ThinkPad connect with extern Monitor Problem

Hello community
I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
I have made an .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
#xrandr --output DP2 --auto --output LVDS --right-of LVDS
#xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
xrandr -d DP2 -s 1900x1200
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
and here is my Xorg.0.log
[ 81.298]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 81.298] X Protocol Version 11, Revision 0
[ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
[ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
[ 81.299] Build Date: 27 August 2012 08:04:39AM
[ 81.299]
[ 81.299] Current version of pixman: 0.26.2
[ 81.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
[ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 81.308] (==) No Layout section. Using the first Screen section.
[ 81.308] (==) No screen section available. Using defaults.
[ 81.308] (**) |-->Screen "Default Screen Section" (0)
[ 81.308] (**) | |-->Monitor "<default monitor>"
[ 81.308] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 81.308] (==) Automatically adding devices
[ 81.308] (==) Automatically enabling devices
[ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 81.308] Entry deleted from font path.
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 81.308] Entry deleted from font path.
[ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 81.308] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 81.308] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 81.308] (II) Loader magic: 0x7c8b00
[ 81.308] (II) Module ABI versions:
[ 81.308] X.Org ANSI C Emulation: 0.4
[ 81.308] X.Org Video Driver: 12.1
[ 81.308] X.Org XInput driver : 16.0
[ 81.308] X.Org Server Extension : 6.0
[ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
[ 81.308] (II) LoadModule: "extmod"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 81.309] (II) Module extmod: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension MIT-SCREEN-SAVER
[ 81.309] (II) Loading extension XFree86-VidModeExtension
[ 81.309] (II) Loading extension XFree86-DGA
[ 81.309] (II) Loading extension DPMS
[ 81.309] (II) Loading extension XVideo
[ 81.309] (II) Loading extension XVideo-MotionCompensation
[ 81.309] (II) Loading extension X-Resource
[ 81.309] (II) LoadModule: "dbe"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 81.309] (II) Module dbe: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DOUBLE-BUFFER
[ 81.309] (II) LoadModule: "glx"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 81.309] (II) Module glx: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (==) AIGLX enabled
[ 81.309] (II) Loading extension GLX
[ 81.309] (II) LoadModule: "record"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 81.309] (II) Module record: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.13.0
[ 81.309] Module class: X.Org Server Extension
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension RECORD
[ 81.309] (II) LoadModule: "dri"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 81.309] (II) Module dri: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.0.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension XFree86-DRI
[ 81.309] (II) LoadModule: "dri2"
[ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.309] (II) Module dri2: vendor="X.Org Foundation"
[ 81.309] compiled for 1.12.4, module version = 1.2.0
[ 81.309] ABI class: X.Org Server Extension, version 6.0
[ 81.309] (II) Loading extension DRI2
[ 81.309] (==) Matched intel as autoconfigured driver 0
[ 81.309] (==) Matched vesa as autoconfigured driver 1
[ 81.309] (==) Matched fbdev as autoconfigured driver 2
[ 81.309] (==) Assigned the driver to the xf86ConfigLayout
[ 81.309] (II) LoadModule: "intel"
[ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 81.310] (II) Module intel: vendor="X.Org Foundation"
[ 81.310] compiled for 1.12.4, module version = 2.20.9
[ 81.310] Module class: X.Org Video Driver
[ 81.310] ABI class: X.Org Video Driver, version 12.1
[ 81.310] (II) LoadModule: "vesa"
[ 81.310] (WW) Warning, couldn't open module vesa
[ 81.310] (II) UnloadModule: "vesa"
[ 81.310] (II) Unloading vesa
[ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 81.310] (II) LoadModule: "fbdev"
[ 81.310] (WW) Warning, couldn't open module fbdev
[ 81.310] (II) UnloadModule: "fbdev"
[ 81.310] (II) Unloading fbdev
[ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 81.310] (--) using VT number 7
[ 81.313] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 8, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 8
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 81.314] drmOpenDevice: node name is /dev/dri/card0
[ 81.314] drmOpenDevice: open result is 9, (OK)
[ 81.314] drmOpenByBusid: drmOpenMinor returns 9
[ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 81.314] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 81.314] (==) intel(0): RGB weight 888
[ 81.314] (==) intel(0): Default visual is TrueColor
[ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 81.314] (**) intel(0): Relaxed fencing enabled
[ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
[ 81.314] (**) intel(0): Triple buffering? enabled
[ 81.314] (**) intel(0): Framebuffer tiled
[ 81.315] (**) intel(0): Pixmaps tiled
[ 81.315] (**) intel(0): 3D buffers tiled
[ 81.315] (**) intel(0): SwapBuffers wait enabled
[ 81.315] (==) intel(0): video overlay key set to 0x101fe
[ 81.315] (II) intel(0): Output LVDS1 has no monitor section
[ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 81.315] (II) intel(0): Output VGA1 has no monitor section
[ 81.340] (II) intel(0): Output HDMI1 has no monitor section
[ 81.380] (II) intel(0): Output DP1 has no monitor section
[ 81.393] (II) intel(0): Output HDMI2 has no monitor section
[ 81.406] (II) intel(0): Output HDMI3 has no monitor section
[ 81.464] (II) intel(0): Output DP2 has no monitor section
[ 81.506] (II) intel(0): Output DP3 has no monitor section
[ 81.507] (II) intel(0): EDID for output LVDS1
[ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
[ 81.507] (II) intel(0): Year: 2010 Week: 33
[ 81.507] (II) intel(0): EDID Version: 1.4
[ 81.507] (II) intel(0): Digital Display Input
[ 81.507] (II) intel(0): 6 bits per channel
[ 81.507] (II) intel(0): Digital interface is undefined
[ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 81.507] (II) intel(0): Gamma: 2.20
[ 81.507] (II) intel(0): No DPMS capabilities specified
[ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.507] (II) intel(0): First detailed timing is preferred mode
[ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
[ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 81.507] (II) intel(0): Manufacturer's mask: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): Supported detailed timing:
[ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
[ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
[ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
[ 81.507] (II) intel(0): AUO
[ 81.507] (II) intel(0): B140RW02 V1
[ 81.507] (II) intel(0): EDID (in hex):
[ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
[ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
[ 81.507] (II) intel(0): 21505400000001010101010101010101
[ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
[ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
[ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
[ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
[ 81.507] (II) intel(0): 004231343052573032205631200a00d0
[ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 81.507] (II) intel(0): Printing DDC gathered Modelines:
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 81.508] (II) intel(0): Printing probed modes for output LVDS1
[ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 81.508] (II) intel(0): EDID for output VGA1
[ 81.533] (II) intel(0): EDID for output HDMI1
[ 81.573] (II) intel(0): EDID for output DP1
[ 81.586] (II) intel(0): EDID for output HDMI2
[ 81.600] (II) intel(0): EDID for output HDMI3
[ 81.657] (II) intel(0): EDID for output DP2
[ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
[ 81.657] (II) intel(0): Year: 2011 Week: 33
[ 81.657] (II) intel(0): EDID Version: 1.4
[ 81.657] (II) intel(0): Digital Display Input
[ 81.657] (II) intel(0): 10 bits per channel
[ 81.657] (II) intel(0): Digital interface is DisplayPort
[ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
[ 81.657] (II) intel(0): Gamma: 2.20
[ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 81.657] (II) intel(0): First detailed timing is preferred mode
[ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
[ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
[ 81.657] (II) intel(0): Supported established timings:
[ 81.657] (II) intel(0): 720x400@70Hz
[ 81.657] (II) intel(0): 640x480@60Hz
[ 81.657] (II) intel(0): 640x480@67Hz
[ 81.657] (II) intel(0): 640x480@72Hz
[ 81.657] (II) intel(0): 640x480@75Hz
[ 81.657] (II) intel(0): 800x600@56Hz
[ 81.657] (II) intel(0): 800x600@60Hz
[ 81.657] (II) intel(0): 800x600@72Hz
[ 81.657] (II) intel(0): 800x600@75Hz
[ 81.657] (II) intel(0): 832x624@75Hz
[ 81.657] (II) intel(0): 1024x768@60Hz
[ 81.657] (II) intel(0): 1024x768@70Hz
[ 81.657] (II) intel(0): 1024x768@75Hz
[ 81.657] (II) intel(0): 1280x1024@75Hz
[ 81.657] (II) intel(0): 1152x864@75Hz
[ 81.657] (II) intel(0): Manufacturer's mask: 0
[ 81.657] (II) intel(0): Supported standard timings:
[ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 81.657] (II) intel(0): Supported detailed timing:
[ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
[ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
[ 81.657] (II) intel(0): Monitor name: PA241W
[ 81.657] (II) intel(0): Serial No: 18107120UB
[ 81.657] (II) intel(0): EDID (in hex):
[ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
[ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
[ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
[ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
[ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
[ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
[ 81.657] (II) intel(0): 41323431570a202020202020000000ff
[ 81.657] (II) intel(0): 00313831303731323055420a2020004b
[ 81.657] (II) intel(0): Printing probed modes for output DP2
[ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
[ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
[ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
[ 81.700] (II) intel(0): EDID for output DP3
[ 81.700] (II) intel(0): Output LVDS1 connected
[ 81.700] (II) intel(0): Output VGA1 disconnected
[ 81.700] (II) intel(0): Output HDMI1 disconnected
[ 81.700] (II) intel(0): Output DP1 disconnected
[ 81.700] (II) intel(0): Output HDMI2 disconnected
[ 81.700] (II) intel(0): Output HDMI3 disconnected
[ 81.700] (II) intel(0): Output DP2 connected
[ 81.700] (II) intel(0): Output DP3 disconnected
[ 81.700] (II) intel(0): Using exact sizes for initial modes
[ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
[ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
[ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
[ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
[ 81.700] (**) intel(0): DPI set to (131, 134)
[ 81.700] (II) Loading sub module "fb"
[ 81.700] (II) LoadModule: "fb"
[ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 81.701] (II) Module fb: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.0.0
[ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
[ 81.701] (II) Loading sub module "dri2"
[ 81.701] (II) LoadModule: "dri2"
[ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 81.701] (II) Module dri2: vendor="X.Org Foundation"
[ 81.701] compiled for 1.12.4, module version = 1.2.0
[ 81.701] ABI class: X.Org Server Extension, version 6.0
[ 81.701] (==) Depth 24 pixmap format is 32 bpp
[ 81.702] (II) intel(0): [DRI2] Setup complete
[ 81.702] (II) intel(0): [DRI2] DRI driver: i965
[ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 81.704] (II) UXA(0): Driver registered support for the following operations:
[ 81.704] (II) solid
[ 81.704] (II) copy
[ 81.704] (II) composite (RENDER acceleration)
[ 81.704] (II) put_image
[ 81.704] (II) get_image
[ 81.704] (==) intel(0): Backing store disabled
[ 81.704] (==) intel(0): Silken mouse enabled
[ 81.704] (II) intel(0): Initializing HW Cursor
[ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 81.707] (==) intel(0): DPMS enabled
[ 81.707] (==) intel(0): Intel XvMC decoder enabled
[ 81.707] (II) intel(0): Set up textured video
[ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
[ 81.707] (==) intel(0): hotplug detection: "enabled"
[ 82.106] (--) RandR disabled
[ 82.107] (II) Initializing built-in extension Generic Event Extension
[ 82.107] (II) Initializing built-in extension SHAPE
[ 82.107] (II) Initializing built-in extension MIT-SHM
[ 82.107] (II) Initializing built-in extension XInputExtension
[ 82.107] (II) Initializing built-in extension XTEST
[ 82.107] (II) Initializing built-in extension BIG-REQUESTS
[ 82.107] (II) Initializing built-in extension SYNC
[ 82.107] (II) Initializing built-in extension XKEYBOARD
[ 82.107] (II) Initializing built-in extension XC-MISC
[ 82.107] (II) Initializing built-in extension SECURITY
[ 82.107] (II) Initializing built-in extension XINERAMA
[ 82.107] (II) Initializing built-in extension XFIXES
[ 82.107] (II) Initializing built-in extension RENDER
[ 82.107] (II) Initializing built-in extension RANDR
[ 82.107] (II) Initializing built-in extension COMPOSITE
[ 82.107] (II) Initializing built-in extension DAMAGE
[ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 82.119] (II) AIGLX: Loaded and initialized i965
[ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
[ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 82.158] (II) LoadModule: "evdev"
[ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 82.159] (II) Module evdev: vendor="X.Org Foundation"
[ 82.159] compiled for 1.12.3.901, module version = 2.7.3
[ 82.159] Module class: X.Org XInput Driver
[ 82.159] ABI class: X.Org XInput driver, version 16.0
[ 82.159] (II) Using input driver 'evdev' for 'Power Button'
[ 82.159] (**) Power Button: always reports core events
[ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 82.159] (--) evdev: Power Button: Found keys
[ 82.159] (II) evdev: Power Button: Configuring as keyboard
[ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 82.160] (**) Option "xkb_rules" "evdev"
[ 82.160] (**) Option "xkb_model" "evdev"
[ 82.160] (**) Option "xkb_layout" "de"
[ 82.160] (**) Option "xkb_variant" "nodeadkeys"
[ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
[ 82.193] (**) Video Bus: always reports core events
[ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
[ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 82.193] (--) evdev: Video Bus: Found keys
[ 82.193] (II) evdev: Video Bus: Configuring as keyboard
[ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 82.193] (**) Option "xkb_rules" "evdev"
[ 82.193] (**) Option "xkb_model" "evdev"
[ 82.193] (**) Option "xkb_layout" "de"
[ 82.193] (**) Option "xkb_variant" "nodeadkeys"
[ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 82.195] (II) No input driver specified, ignoring this device.
[ 82.195] (II) This device may have been added with another device file.
[ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
[ 82.195] (**) Sleep Button: always reports core events
[ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 82.195] (--) evdev: Sleep Button: Found keys
[ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
[ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 82.195] (**) Option "xkb_rules" "evdev"
[ 82.196] (**) Option "xkb_model" "evdev"
[ 82.196] (**) Option "xkb_layout" "de"
[ 82.196] (**) Option "xkb_variant" "nodeadkeys"
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 82.197] (II) No input driver specified, ignoring this device.
[ 82.197] (II) This device may have been added with another device file.
[ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
[ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 82.197] (**) Integrated Camera: always reports core events
[ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
[ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
[ 82.197] (--) evdev: Integrated Camera: Found keys
[ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
[ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
[ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 82.197] (**) Option "xkb_rules" "evdev"
[ 82.197] (**) Option "xkb_model" "evdev"
[ 82.197] (**) Option "xkb_layout" "de"
[ 82.197] (**) Option "xkb_variant" "nodeadkeys"
[ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[ 82.198] (II) No input driver specified, ignoring this device.
[ 82.198] (II) This device may have been added with another device file.
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
[ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
[ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.199] (**) HID 046a:0101: always reports core events
[ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
[ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
[ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.199] (--) evdev: HID 046a:0101: Found relative axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
[ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
[ 82.199] (--) evdev: HID 046a:0101: Found keys
[ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
[ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
[ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
[ 82.199] (**) Option "xkb_rules" "evdev"
[ 82.199] (**) Option "xkb_model" "evdev"
[ 82.199] (**) Option "xkb_layout" "de"
[ 82.199] (**) Option "xkb_variant" "nodeadkeys"
[ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
[ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
[ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
[ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
[ 82.200] (**) HID 046a:0101: always reports core events
[ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
[ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
[ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
[ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
[ 82.200] (--) evdev: HID 046a:0101: Found relative axes
[ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
[ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
[ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
[ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
[ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
[ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
[ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
[ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
[ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
[ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
[ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
[ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
[ 82.200] (II) No input driver specified, ignoring this device.
[ 82.200] (II) This device may have been added with another device file.
[ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
[ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 82.200] (**) Option "xkb_rules" "evdev"
[ 82.200] (**) Option "xkb_model" "evdev"
[ 82.200] (**) Option "xkb_layout" "de"
[ 82.200] (**) Option "xkb_variant" "nodeadkeys"
[ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 82.201] (II) LoadModule: "synaptics"
[ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
[ 82.201] compiled for 1.12.2, module version = 1.6.2
[ 82.201] Module class: X.Org XInput Driver
[ 82.201] ABI class: X.Org XInput driver, version 16.0
[ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.201] (**) Option "Device" "/dev/input/event11"
[ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 82.203] (**) Option "TapButton1" "1"
[ 82.203] (**) Option "TapButton2" "2"
[ 82.203] (**) Option "TapButton3" "3"
[ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 82.204] (II) No input driver specified, ignoring this device.
[ 82.204] (II) This device may have been added with another device file.
[ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
[ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
[ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
[ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 82.205] (II) No input driver specified, ignoring this device.
[ 82.205] (II) This device may have been added with another device file.
[ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
[ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 82.205] (**) ThinkPad Extra Buttons: always reports core events
[ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
[ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
[ 82.205] (**) Option "xkb_rules" "evdev"
[ 82.205] (**) Option "xkb_model" "evdev"
[ 82.205] (**) Option "xkb_layout" "de"
[ 82.205] (**) Option "xkb_variant" "nodeadkeys"
[ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 82.222] (II) intel(0): Printing DDC gathered Modelines:
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
[ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
[ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
[ 117.767] (II) intel(0): Printing DDC gathered Modelines:
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
[ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
I dont know what to do makes the Kernel the Problem?
On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
here is my xrandr
[frank@bullitt ~]$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1600x1200 60.0
1680x1050 60.0
1680x945 60.0
1400x1050 74.9 60.0
1600x900 60.0
1280x1024 85.0 75.0 60.0
1440x900 84.8 75.0 59.9
1280x960 85.0 60.0
1360x768 59.8 60.0
1280x800 84.9 74.9 59.8
1152x864 75.0
1280x768 84.8 74.9 59.9
1280x720 60.0
1024x768 85.0 75.1 70.1 60.0
1024x576 60.0
832x624 74.6
800x600 85.1 72.2 75.0 60.3 56.2
848x480 60.0
640x480 85.0 72.8 75.0 66.7 60.0
720x400 85.0 70.1
640x400 85.1
640x350 85.1
DP3 disconnected (normal left inverted right x axis y axis)
Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
I like arch very much but so it doesnt make fun :-(
I hope someone can help me
the picture shows openbox with the Thunar maximized
Last edited by kerasi (2012-10-12 23:12:12)

@trilby
i use my Laptop at home 95% and at work 5%
so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
i hope i explained it well.
@anoknusa
i change your config to this
xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used. This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file. As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution. Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
what has xrandr to look like for my external monitor and laptop?
and what would the script look like for me?
external 1920x1200
T420 1600x900
and thank you for your patience and have a nice day
ps: i know iam very close to find a solution for my problem
Last edited by kerasi (2012-10-11 00:05:55)

Problem with T61 and DVI External Monitor (via Advanced Mini-Dock)

Ever since I upgraded to Vista SP1 on my ThinkPad T61 (with an Intel integrated 965 series graphics card), I've been having problems when I try to use an external monitor via the DVI port in my Advanced Mini-dock. I'm curious if other people have experienced this problem.
The problems surfaces when I first boot up, or sometimes after my ThinkPad has been running for awhile (particularly when I do something graphics related, such as right-clicking to open display properties). The picture starts to flicker (or disappear and reappear, like the screen does when changing graphics resolutions). I also hear the "ba-bum" sound that you hear when disconnecting a piece of hardware, followed by the "bum-ba" reconnection sound - these two sounds happen repeatedly (sometimes as fast as once per second). If I don't do anything, sometimes I'll get a bluescreen.
Not long ago, I found a fix of sorts: to stop the flickering/reconnecting, I just open Task Manager and stop the process called "igfxpers" (an Intel driver problem). The problem always disappears after I do this, although I have to remember to do it every time I reboot or else the problem comes back. So it's not an ideal fix.
This problem doesn't happen when I connect an external monitor using the analog VGA port, or when I'm just using the notebook LCD. It's limited to just the DVI connection. I've tried two different digital monitors (one LG, the other BenQ) as well as two DVI cables - the problem is still the same. So it seems like a driver problem of some sort - unfortunately, the Intel drivers haven't been updated since last February.
I should also note that I've tried reinstalling my OS two or three times, and the problem always comes back. Has anyone else had this problem, and is a fix on the way?

Error Message:
Input signal out of range. Translation:
You will see this on an otherwise blank screen. Assuming that the data cable is plugged in correctly, the video card is feeding the monitor a signal stream in excess of what the monitor can accommodate. The two main causes for this are that the user has set either the resolution or the vertical frequency rate too high. For example, you might set a new graphics card to display at 1,280 x 1,024, but if the monitor is only capable of 1,024 x 768 resolution, you’ll get a Sync Out of Range error. This is especially common in 14-inch monitors.
Solution:
Because you obviously can’t make settings changes from within regular Windows, you’ll need to reboot into Windows Safe Mode. When you restart the system, there is a point during boot up when the system switches from reporting diagnostics and detected components to loading Windows. This point is usually accompanied by a beep and the screen going black. Just before this point, you want to start repeatedly pressing the F8 key. This should bring up a menu of Windows boot options. The one you want to pick is Safe Mode.
From Safe Mode right-click the Desktop and select Properties. Go to the Settings tab and use the slider to drop your resolution a notch or two. Reboot and let Windows try to go into Normal mode. If this still doesn’t work, go back into Safe Mode and get to the Settings tab of Display Properties. Click the Advanced button, go to the Monitor tab, and check your refresh rate. The lowest advisable rate is usually 60Hz, although this works better for LCDs (liquid-crystal displays) than CRTs (cathode ray tubes). Apply the change and reboot.

2011 Macbook Pro External Monitor Problems

Hi all,
Looking through some of the threads, it appears that getting macbook pros to work with an external monitors is a big issue.
I've just bought a phillips 27" monitor and I'm having no luck whatsoever getting my MBP to see it. I've tried both HDMI and DVI using Apple's own mini adapters, but no matter I do, the monitor fails to detect any kind of signal and goes into sleep mode.
I occassionally get the blue screen flicker on my MBP as though it's trying to connect, but the monitor does nothing!!
I've tried most of the suggestions in other threads, which relate to earlier OSX versions, but nothing has helped.
I'm running 10.8.4 on a 2.2 GHz Intel Core i7.
If I fire up my Apple TV, I can use mirroring and the monitor displays my desktop no problem, but the picture quality is poor. So I guess the monitor works. I want to use a bigger screen as I use Logic Pro, so clarity is pretty essential when it comes to picture quality.
Any help would be most appreciated.
Best Regards
Phil

Hello Phil,
The following article provides a number of troubleshooting steps that I'd recommend looking into, especially testing with another display if possible, and resetting the MacBook Pro's parameter RAM and SMC.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Possibly mundane Mini-DVI to VGA into an external monitor problem

Hi,
I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
Thanks if you can help!
Jack

You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
Joy joy hallelujah.
Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
Hope that helps.
~r

External Monitor Mask Manipulation Problem

Similar Messages

Maybe you are looking for