External Monitor 'Not Optimum Mode'

Hi all,
I've been using my macbook hooked up to a 17" Samsung VGA LCD monitor through the Mini DVI to VGA connector for quite some time now.
Until recently, my monitor have gone blank and displays a 'Not Optimum Mode. 1280x1024 60 Hz' message.
I kept changing my settings on the macbook but nothing seems to work. What would be the problem here? Help! It's not fun editing video on a 13 inch screen.

hi all, thanks for all the replies...
unfortunately it is not a mirrorring/expanded screen toggle issue... i used to work on both these modes without any problems.
only recently do i encounter the problems. what I did was that I opened system preferences > displays, and clicked on 'gather windows' to get the external display window displayed on my macbook... i did the necessary changes and still nothing happens.
by the way, when i used to use mirror displays, my external display would just crop the top and bottom of the screen to maintain the correct aspect ratio of my macbook widescreen.
cheers...any more ideas?

Similar Messages

  • MacBook will not display on external monitor in clamshell mode

    System information:
    13 in. MacBook (2.4Ghz Intel 2-Core)
    10.6.7
    External Display connected with Apple DisplayPort VGA adapter
    Apple Wireless Keyboard
    Generic wireless mouse that connects to a USB stick plugged into the MacBook
    This is dirving me nuts because it was working perfectly until about 2 weeks ago. I was following the pocess outlined here. http://support.apple.com/kb/HT3131
    Here is what happens now:
    MacBook display and external monitor are in mirroring mode. All devices are powered on and plugged in.
    Close MacBook lid. MacBook goes to sleep. Blinking LED.
    Hit spacebar on the Apple Bluetooth keyboard. The LED changes to steady on. However, the external display never shows the desktop. I've tried Command-F1... nothing.
    If I open the lid again... the MacBook goes back to sleep.
    I then have to pull out the DisplayPort VGA adapter to wake the MacBook up again.

    You could try resetting the SMC and see if that helps.

  • Can I use an external monitor in portrait mode?

    I do not yet own a Mac, but I am doing up-front research to know what to expect.
    I currently have a Samsung 204T LCD monitor (DVI) which allows rotating the display into portrait mode.
    I know that OS X supports using an external monitor to extend or mirror the desktop. Can an external monitor be configured for operating in portrait mode? I would expect that this requires the video driver to rotate the display before sending it to the monitor.

    I will leave this answer to my original question.
    I called Apple and was completely disappointed with their answer. They indicated that they would not answer such a question, since they deemed it to be "outside of the scope of Apple support" since my question was deemed "not a consumer-oriented
    question."
    So yesterday, I took my Samsung SyncMaster 204T monitor to the local Apple retailer to try it out on an actual system. I specifically tried it out on the 24" iMac with the nVidia 7300GT graphics card, since that is the system I was interested in.
    It turned out that this monitor works beautifully in portrait mode with the above system using Tiger 10.4.8.
    So, I went and bought it!!

  • External monitor not working after ML upgrade

    I have a late 2008 Unibody Macbook and normally use it in clamshell mode with a Samsung 2043NW monitor if I'm in the office. Previously working fine in 10.5.8 through mini display port adapter. Upgraded via fresh install of 10.6.8 to ML, and the monitor flickered on occasionally but otherwise would not work - when it did display it showed the same resolution as the macbook screen i.e. 1280 X 800 instead of 1680 X 1050.
    There's a thread here related to this: https://discussions.apple.com/thread/2387462?start=15&tstart=0  but this software was not the answer. I can now view the screen, but it is still being sent a resolution of 1280X800, rather than 1680X1050 (i.e. a fuzzy mess). It also will not work in clamshell mode at all, and just goes to sleep when the case is shut.
    Anyone have a solution for this, or have I been 'obsolesced'? Does anyone have a unibody Macbook that DOES work with an external monitor?

    OK, now here's an interesting thing - the macbook has begun to work in clamshell mode. This is REALLY weird. Tried again this morning in the hope of getting back the monitor control icon in the toolbar and it booted straight into clamshell mode with the lid shut.
    When I first had this running 10.5 it would only work in clamshell mode if you pressed the power button and immediately closed the lid before the screen lit up grey. More recently it has been perfectly happy to enter clamshell mode after a period of use normally, just plugging in the monitor and shutting the lid. It would be nice if this behaviour were to start again soon.

  • Ultra dock + three external monitors not working

    Hardware:
    W540 + Ultra Dock (170W)
    2x 24" LCDs @ 1920X1200 (DVI only)
    1x 30" LCD @ 2560x1600 (DVI only)
    1x Display Port to DVI Active Converter (for the 30" LCD)
    What I want to have is four displays: W540 LCD + 3 external monitors as described above. However, I can only get two of the external displays to turn on regardless of how many chickens I sacrifice. Note: I've searched extensively to see if others have had this problem, which they obviously have, but none of the solutions worked. 
    I think the issue is the 'advanced' mode, but I already turned it on in the BIOS. The laptop LCD works correctly (2880x1620), the 30" LCD works correctly with the display port to DVI active adapter (2560x1600), and one of the 24" LCDs works correctly (1920x1200). However, the other 24" LCD isn't available in Windows as a detected display unless I start swapping cables, which will then enable it while disabling the other 24" LCD.
    For reference, the connections are as follows:
    Laptop LCD (built-in)
    30" LCD: DisplayPort to DVI (active); Ultra Dock DisplayPort 0
    24" LCD number 1: DisplayPort to DVI cable (passive); Ultra Dock DisplayPort 1
    24" LCD number 2: DVI to DVI; Ultra Dock DVI Port 0
    It's my understanding that the K1100M discrete graphics card should be driving all three of the external displays, but that isn't the case right now. I see one 24" and the 30" displays in the Nvidia Control Panel and I see all three working monitors (including the laptop LCD) in botht he Nvidia Control Panel and the Windows Display area.
    Things I've tried:
    Uninstalled + reinstalled Nvidia Quadro drivers
    Uninstalled + reinstalled Intel 4600 drivers
    Enabled Advanced mode in BIOS
    Restarted 5,000 times
    Swapped cables until my fingers started to bleed
    Updated the firmware of the Ultra Dock (it was already fully updated)
    According to this page, I should be able to connect six displays including the built-in LCD. When I first looked at it, I thought I could use both Ultra Dock DisplayPort ports as well as the Ultra Dock DVI port, but it's very unclear if that's actually the case. What does it mean by DP or HDMI and DP or DVI? Does that mean I can use both DisplayPorts (which I'm currently doing and it works) only? Does it mean I can use both DisplayPorts as well as HDMI and DVI? Does it mean if I want to use HDMI and DVI that I can't use either DisplayPort? Does it mean DVI and HDMI both share an output with one of the DisplayPorts so only one of each can be used at a time? TERRIBLE DOCUMENTATION.
    Any help would be greatly appreciated as this has been extremely frustrating. I have a feeing the solution is going to be a disappointment as well because it's probably going to involve buying yet another adapter and/or using the Mini-DP output on the laptop instead of, you know, actually being able to use the expensive Ultra Dock...
    [rant]
    I have no idea how to tell if everything is working because the graphics card situation is extremely confusing. I didn't realize when I bought the laptop that the discrete card couldn't drive the laptop's built-in LCD, which is very annoying. Or, maybe that's not true, but the documentation is so confusing that I can't be sure either way. Also, and this really pissed me off, the Ultra Dock DVI connector can't drive a dual link display. What the hell??? Why was this not clearly annotated somewhere? I really hated needing to purchase a DisplayPort to DVI active adapter to make my brand new laptop dock work as advertised. UGH.
    [/rant]

    I'm struggling with a very similar problem. (Thinkpad W540, K2100, Ultradock 170W)
    I am using 2 external monitors right now in bios display standard mode - it's the only way they work at all for me right now. I have tried uninstalling graphics drivers, enabling advanced mode, and restarting, but none of the external displays are detected. I've also tried updating the dock's firmware, but it doesn't seem to be updating (this may have already been updated).
    Current working setup:
    - 2 x 22" external LCDs connected to Ultradock via DP -> DVI cables
    - Laptop integrated LCD
    Related but not quite as equally frustrating, the integrated LCD does not resume when waking the computer from a sleep state. Only a reboot brings the display back.
    I'd like to connect another 24" display over HDMI, but don't have any confidence of it working since advanced mode is utterly worthless for me at the moment. I'm quite dissatisfied especially since I purchased an extended warranty and last time I called for support Lenovo tried to sell me an additional support plan claiming that software was not covered under my current warranty.

  • External Monitor not displaying correct resolution.

    I just hooked up my Viewsonic 19" widescreen display (1440x900) to my MacBook Pro. Ive closed the lid of my laptop and set the resolution to 1440x900 (60hz) in System Preferences yet the external display is still fuzzy. I looked in the monitors menus and it says its currently displaying 1152x864!!!!
    When i tried mirror mode it looks like it thinks the external monitor is a different size but both screens have the same native resolution.
    I've tried a bunch of different resolutions but none of them seem to use my monitors native resolution. I'm using the included DVI to VGA adaptor into the monitor. The monitor works fine if I plug it into my old Dell XP Laptop or XP desktop.
    Does anyone have any suggestions?

    Same "fuzzy" picture on external LCD attached to MacBook Pro here (2GHz, 2GB RAM, 10.4.11). Been using a mediocre NEC LCD72vx for along time and figured that was the reason, but I tried a stellar ViewSonic VG191b that I use with my Windows desktop for layout and found the same slightly fuzzy picture, despite also noting that the resolution setting was the native one. Note, I use the external display rotated 90, but I saw no change at 0 rotation. Straight DVI on both.
    Half of the fun of having DVI out is its usefulness for layout in publishing. Powerful MBP, poor external display quality. I think some sort of fix is indicated here.

  • External monitor not recognized!

    I have a Philips 180P2 external monitor hooked up to my iMac 2.8 GHz, 24", which was running fine until my upgradte to SL this afternoon. Now (among other little "quirks") the external monitor can't recognize the signal from the iMac ... or rather, the iMac won't display there...
    What's odd is that I had, for example, Safari on the external monitor and, when I start that browser, it won't show as it running on the external Philips monitor ... which isn't running (yes, power is on and cable is plugged in). When I unplug the monitor adapter from the back of the iMac it switches to one-display mode again and Safari is shown on the iMac.
    The system preferences show the monitor and its position fine ... what's going on?!
    Any and all help is REALLY appreciated. Thanks!

    I've had similar problems (see http://discussions.apple.com/thread.jspa?threadID=2132912&tstart=0) with my second monitor. When I downgrade the display of the external to 1600x1000, then the internal monitor of the imac to 1600x 1200, the display on the external is not very good. However, if I then revert the external to 1680x1050 and the internal to 1900x1200 I can get both back to what things were before updating to snow leopard. However, when I then switch off the imac for a while and then switch back on again the external switches back and forward between no display and a fleeting glimpse of the desktop.

  • External monitor not going full resolution on extended desktop

    Hello,
    I have a Gateway widescreen 1680x1050 resolution monitor plugged into my 13" Macbook Aluminum computer. When I have both my external and built in display turned on extended mode, my external monitor only goes up to 1600x1000 resolution, which is obviously lower than full-res. When I close the lid of my Macbook (and run the external display only), the external display goes up to full 1680x1050 resolution. Could someone please help me solve the problem of my Gateway external display going to less than full res on extended display mode.
    Thanks a lot!
    Adrian

    There is a clue here in what might be going on. Note that the MacBook's 1280x800 display is a 16:10 aspect ratio (exactly). Now, the external resolution that is reported by shmootz is 1600x1000 which is also a 16:10 ratio. It looks to me that the system is running as if it is in the mirrored mode. The video driver will force the displays to the same aspect ratio when running as mirrored displays.
    I'd try a few things to see if you can reset the display options. First, try toggling the "Mirror Displays" option in System Preferences -> Displays -> Arrangement. Second, you may want to try a reset of your PRAM and the SMC.
    Here is a link to Apple's support article on resetting the PRAM:
    http://support.apple.com/kb/HT1379
    Here is a link to Apple's support article on resetting the SMC:
    http://support.apple.com/kb/HT1411

  • External Monitor Not Working after Mavericks upgrade

    I just upgraded to Mavericks and my USB external monitor & VGA external monitor is not being recognized.

    I just upgraded to Mac 10.9.
    My Sony KLV-32S300A LCD HDMI TV is no longer recognized as external display (neither in mirror nor in 2nd window mode).
    External display used to work flawlessly under Mac 10.8.5.
    My hardware: MacBook 13-inch, aluminum, late 2008.
    So far I have found no workarounds.

  • External monitor not detected on Thinkpad W530 intel-virtual-output

    I'm having problems with connecting my ThinkPad W530 to external monitors since a few months. I'm using NVIDIA Optimus and bumblebee/optirun since the VGA and Mini DisplayPort connectors are only wired to the NVIDIA card om this laptop. For a long time I have executed:
    $ optirun true
    $ intel-virtual-output
    Then I have started the Screens GUI tool in Gnome to setup the placement of the external screen but now the external screen is not present in the GUI tool and xrandr gives me:
    Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
    LVDS1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
    1920x1080 60.00*+ 50.00
    1400x1050 59.98
    1280x1024 60.02
    1280x960 60.00
    1024x768 60.00
    800x600 60.32 56.25
    640x480 59.94
    VGA1 disconnected (normal left inverted right x axis y axis)
    VIRTUAL1 disconnected (normal left inverted right x axis y axis)
    If I select "Discrete mode" and select startup screen as VGA in the BIOS the BIOS and the Grub screens shows on the external monitor but the screen locks on the screen that shows that the system is booting with the linux-ck kernel. This has never worked for me in Arch Linux so that is no surprise. In Ubuntu everything everything worked fine the last time I tried.
    How can I debug this? Why is the external screen not detected any more?

    Thanks, I am not sure exactly how to read the logs but I cannot find anything that is obviously wrong
    Below is my log with an external screen connected via Mini DisplayPort and after running:
    $ optirun true
    $ intel-virtual-output
    a few times, no more logs seem to be added when I connect/disconnect the monitor or when I run the above two commands more times.
    ╰─➤ cat /var/log/Xorg.0.log 1 ↵
    [ 2.616]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2.616] X Protocol Version 11, Revision 0
    [ 2.616] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2.616] Current Operating System: Linux ethuil 3.13.9-1-ck #1 SMP PREEMPT Fri Apr 4 15:50:10 EDT 2014 x86_64
    [ 2.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet rcutree.rcu_idle_gp_delay=1
    [ 2.616] Build Date: 09 January 2014 08:47:24AM
    [ 2.616]
    [ 2.616] Current version of pixman: 0.32.4
    [ 2.616] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.616] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.616] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 22:09:08 2014
    [ 2.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2.627] (==) No Layout section. Using the first Screen section.
    [ 2.627] (==) No screen section available. Using defaults.
    [ 2.627] (**) |-->Screen "Default Screen Section" (0)
    [ 2.627] (**) | |-->Monitor "<default monitor>"
    [ 2.628] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2.628] (==) Automatically adding devices
    [ 2.628] (==) Automatically enabling devices
    [ 2.628] (==) Automatically adding GPU devices
    [ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2.638] Entry deleted from font path.
    [ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2.638] Entry deleted from font path.
    [ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2.638] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 2.638] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.638] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.638] (II) Loader magic: 0x804c80
    [ 2.638] (II) Module ABI versions:
    [ 2.638] X.Org ANSI C Emulation: 0.4
    [ 2.638] X.Org Video Driver: 15.0
    [ 2.638] X.Org XInput driver : 20.0
    [ 2.638] X.Org Server Extension : 8.0
    [ 2.639] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 3.588] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
    [ 3.588] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
    [ 3.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 3.589] Initializing built-in extension Generic Event Extension
    [ 3.589] Initializing built-in extension SHAPE
    [ 3.589] Initializing built-in extension MIT-SHM
    [ 3.589] Initializing built-in extension XInputExtension
    [ 3.589] Initializing built-in extension XTEST
    [ 3.589] Initializing built-in extension BIG-REQUESTS
    [ 3.589] Initializing built-in extension SYNC
    [ 3.589] Initializing built-in extension XKEYBOARD
    [ 3.589] Initializing built-in extension XC-MISC
    [ 3.589] Initializing built-in extension SECURITY
    [ 3.589] Initializing built-in extension XINERAMA
    [ 3.589] Initializing built-in extension XFIXES
    [ 3.589] Initializing built-in extension RENDER
    [ 3.589] Initializing built-in extension RANDR
    [ 3.589] Initializing built-in extension COMPOSITE
    [ 3.589] Initializing built-in extension DAMAGE
    [ 3.589] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3.589] Initializing built-in extension DOUBLE-BUFFER
    [ 3.589] Initializing built-in extension RECORD
    [ 3.589] Initializing built-in extension DPMS
    [ 3.589] Initializing built-in extension Present
    [ 3.590] Initializing built-in extension DRI3
    [ 3.590] Initializing built-in extension X-Resource
    [ 3.590] Initializing built-in extension XVideo
    [ 3.590] Initializing built-in extension XVideo-MotionCompensation
    [ 3.590] Initializing built-in extension XFree86-VidModeExtension
    [ 3.590] Initializing built-in extension XFree86-DGA
    [ 3.590] Initializing built-in extension XFree86-DRI
    [ 3.590] Initializing built-in extension DRI2
    [ 3.590] (II) "glx" will be loaded by default.
    [ 3.590] (II) LoadModule: "dri2"
    [ 3.590] (II) Module "dri2" already built-in
    [ 3.590] (II) LoadModule: "glamoregl"
    [ 3.593] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 3.615] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 3.615] compiled for 1.15.0, module version = 0.6.0
    [ 3.615] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 3.615] (II) LoadModule: "glx"
    [ 3.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 3.618] (II) Module glx: vendor="X.Org Foundation"
    [ 3.618] compiled for 1.15.0, module version = 1.0.0
    [ 3.618] ABI class: X.Org Server Extension, version 8.0
    [ 3.618] (==) AIGLX enabled
    [ 3.618] Loading extension GLX
    [ 3.618] (==) Matched intel as autoconfigured driver 0
    [ 3.618] (==) Matched intel as autoconfigured driver 1
    [ 3.618] (==) Matched modesetting as autoconfigured driver 2
    [ 3.618] (==) Matched fbdev as autoconfigured driver 3
    [ 3.618] (==) Matched vesa as autoconfigured driver 4
    [ 3.618] (==) Assigned the driver to the xf86ConfigLayout
    [ 3.618] (II) LoadModule: "intel"
    [ 3.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 3.623] (II) Module intel: vendor="X.Org Foundation"
    [ 3.623] compiled for 1.15.0, module version = 2.99.911
    [ 3.623] Module class: X.Org Video Driver
    [ 3.623] ABI class: X.Org Video Driver, version 15.0
    [ 3.623] (II) LoadModule: "modesetting"
    [ 3.624] (WW) Warning, couldn't open module modesetting
    [ 3.624] (II) UnloadModule: "modesetting"
    [ 3.624] (II) Unloading modesetting
    [ 3.624] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 3.624] (II) LoadModule: "fbdev"
    [ 3.624] (WW) Warning, couldn't open module fbdev
    [ 3.624] (II) UnloadModule: "fbdev"
    [ 3.624] (II) Unloading fbdev
    [ 3.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 3.624] (II) LoadModule: "vesa"
    [ 3.624] (WW) Warning, couldn't open module vesa
    [ 3.624] (II) UnloadModule: "vesa"
    [ 3.624] (II) Unloading vesa
    [ 3.624] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 3.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 3.624] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
    [ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
    [ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
    [ 3.624] (++) using VT number 1
    [ 3.625] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
    [ 3.625] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 3.625] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 3.625] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 3.625] (==) intel(0): RGB weight 888
    [ 3.625] (==) intel(0): Default visual is TrueColor
    [ 3.625] (**) intel(0): Framebuffer tiled
    [ 3.625] (**) intel(0): Pixmaps tiled
    [ 3.625] (**) intel(0): "Tear free" disabled
    [ 3.625] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 3.625] (II) intel(0): Output LVDS1 has no monitor section
    [ 3.625] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 3.625] (II) intel(0): Output VGA1 has no monitor section
    [ 3.625] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 3.625] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
    [ 3.625] (==) intel(0): DPI set to (96, 96)
    [ 3.625] (II) Loading sub module "dri2"
    [ 3.625] (II) LoadModule: "dri2"
    [ 3.625] (II) Module "dri2" already built-in
    [ 3.625] (==) Depth 24 pixmap format is 32 bpp
    [ 3.627] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    [ 3.627] (==) intel(0): Backing store enabled
    [ 3.627] (==) intel(0): Silken mouse enabled
    [ 3.628] (II) intel(0): HW Cursor enabled
    [ 3.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 3.628] (==) intel(0): DPMS enabled
    [ 3.628] (II) intel(0): [DRI2] Setup complete
    [ 3.628] (II) intel(0): [DRI2] DRI driver: i965
    [ 3.628] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 3.628] (II) intel(0): direct rendering: DRI2 Enabled
    [ 3.628] (==) intel(0): hotplug detection: "enabled"
    [ 3.628] (--) RandR disabled
    [ 3.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 3.650] (II) AIGLX: enabled GLX_ARB_create_context
    [ 3.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 3.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 3.650] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 3.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 3.650] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 3.650] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 3.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 3.650] (II) AIGLX: Loaded and initialized i965
    [ 3.650] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 3.652] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 3.665] (II) intel(0): Setting screen physical size to 508 x 285
    [ 3.732] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 3.732] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.732] (II) LoadModule: "evdev"
    [ 3.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 3.734] (II) Module evdev: vendor="X.Org Foundation"
    [ 3.734] compiled for 1.15.0, module version = 2.8.2
    [ 3.734] Module class: X.Org XInput Driver
    [ 3.734] ABI class: X.Org XInput driver, version 20.0
    [ 3.734] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.734] (**) Power Button: always reports core events
    [ 3.734] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 3.734] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.734] (--) evdev: Power Button: Found keys
    [ 3.734] (II) evdev: Power Button: Configuring as keyboard
    [ 3.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 3.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 3.734] (**) Option "xkb_rules" "evdev"
    [ 3.734] (**) Option "xkb_model" "pc104"
    [ 3.734] (**) Option "xkb_layout" "se"
    [ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.754] (**) Video Bus: always reports core events
    [ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.754] (--) evdev: Video Bus: Found keys
    [ 3.754] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
    [ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 3.754] (**) Option "xkb_rules" "evdev"
    [ 3.754] (**) Option "xkb_model" "pc104"
    [ 3.754] (**) Option "xkb_layout" "se"
    [ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.754] (**) Video Bus: always reports core events
    [ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.754] (--) evdev: Video Bus: Found keys
    [ 3.754] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
    [ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 3.754] (**) Option "xkb_rules" "evdev"
    [ 3.754] (**) Option "xkb_model" "pc104"
    [ 3.754] (**) Option "xkb_layout" "se"
    [ 3.755] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 3.755] (II) No input driver specified, ignoring this device.
    [ 3.755] (II) This device may have been added with another device file.
    [ 3.755] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 3.755] (**) Sleep Button: Applying InputClass "system-keyboard"
    [ 3.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 3.755] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 3.755] (**) Sleep Button: always reports core events
    [ 3.755] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 3.755] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 3.755] (--) evdev: Sleep Button: Found keys
    [ 3.755] (II) evdev: Sleep Button: Configuring as keyboard
    [ 3.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
    [ 3.755] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 3.755] (**) Option "xkb_rules" "evdev"
    [ 3.755] (**) Option "xkb_model" "pc104"
    [ 3.755] (**) Option "xkb_layout" "se"
    [ 3.755] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 3.755] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
    [ 3.756] (**) Integrated Camera: Applying InputClass "system-keyboard"
    [ 3.756] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 3.756] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 3.756] (**) Integrated Camera: always reports core events
    [ 3.756] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
    [ 3.756] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
    [ 3.756] (--) evdev: Integrated Camera: Found keys
    [ 3.756] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 3.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
    [ 3.756] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 3.756] (**) Option "xkb_rules" "evdev"
    [ 3.756] (**) Option "xkb_model" "pc104"
    [ 3.756] (**) Option "xkb_layout" "se"
    [ 3.756] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.756] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.756] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.756] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.757] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event8)
    [ 3.757] (II) No input driver specified, ignoring this device.
    [ 3.757] (II) This device may have been added with another device file.
    [ 3.757] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.757] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 3.757] (**) AT Translated Set 2 keyboard: always reports core events
    [ 3.757] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 3.757] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 3.757] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 3.757] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 3.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 3.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 3.757] (**) Option "xkb_rules" "evdev"
    [ 3.757] (**) Option "xkb_model" "pc104"
    [ 3.757] (**) Option "xkb_layout" "se"
    [ 3.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
    [ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 3.757] (II) LoadModule: "synaptics"
    [ 3.757] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 3.758] (II) Module synaptics: vendor="X.Org Foundation"
    [ 3.758] compiled for 1.15.0, module version = 1.7.4
    [ 3.758] Module class: X.Org XInput Driver
    [ 3.758] ABI class: X.Org XInput driver, version 20.0
    [ 3.758] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 3.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.758] (**) Option "Device" "/dev/input/event12"
    [ 3.783] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 3.783] (**) Option "TapButton1" "1"
    [ 3.783] (**) Option "TapButton2" "2"
    [ 3.783] (**) Option "TapButton3" "3"
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
    [ 3.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 3.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 3.794] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 3.794] (II) No input driver specified, ignoring this device.
    [ 3.794] (II) This device may have been added with another device file.
    [ 3.794] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
    [ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
    [ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 3.794] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 3.794] (**) ThinkPad Extra Buttons: always reports core events
    [ 3.794] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
    [ 3.794] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 3.794] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 3.795] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 3.795] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
    [ 3.795] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
    [ 3.795] (**) Option "xkb_rules" "evdev"
    [ 3.795] (**) Option "xkb_model" "pc104"
    [ 3.795] (**) Option "xkb_layout" "se"
    [ 3.799] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
    [ 3.824] (II) UnloadModule: "synaptics"
    [ 3.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 3.824] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.824] (**) Option "Device" "/dev/input/event12"
    [ 3.844] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 3.844] (**) Option "TapButton1" "1"
    [ 3.844] (**) Option "TapButton2" "2"
    [ 3.844] (**) Option "TapButton3" "3"
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
    [ 3.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 3.854] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
    [ 3.855] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
    [ 3.855] failed to find screen to remove
    [ 3.855] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
    [ 3.855] (II) config/udev: removing device Video Bus
    [ 3.863] (II) evdev: Video Bus: Close
    [ 3.863] (II) UnloadModule: "evdev"
    [ 3.863] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 3.863] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.863] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.863] (**) Video Bus: always reports core events
    [ 3.863] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 3.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.863] (--) evdev: Video Bus: Found keys
    [ 3.863] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
    [ 3.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 3.863] (**) Option "xkb_rules" "evdev"
    [ 3.863] (**) Option "xkb_model" "pc104"
    [ 3.863] (**) Option "xkb_layout" "se"
    [ 3.863] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
    [ 3.863] (II) config/udev: removing device Video Bus
    [ 3.870] (II) evdev: Video Bus: Close
    [ 3.870] (II) UnloadModule: "evdev"
    [ 3.870] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 3.870] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.870] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.870] (**) Video Bus: always reports core events
    [ 3.870] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 3.870] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.870] (--) evdev: Video Bus: Found keys
    [ 3.870] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
    [ 3.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 3.870] (**) Option "xkb_rules" "evdev"
    [ 3.870] (**) Option "xkb_model" "pc104"
    [ 3.870] (**) Option "xkb_layout" "se"
    [ 4.540] (II) intel(0): EDID vendor "LEN", prod id 16562
    [ 4.540] (II) intel(0): Printing DDC gathered Modelines:
    [ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
    [ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
    [ 7.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
    [ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
    [ 7.358] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 7.358] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 7.358] (**) Option "Emulate3Buttons" "false"
    [ 7.358] (**) Option "EmulateWheel" "true"
    [ 7.358] (**) Option "EmulateWheelButton" "2"
    [ 7.358] (**) Option "YAxisMapping" "4 5"
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 7.358] (**) Option "XAxisMapping" "6 7"
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.358] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event15"
    [ 7.358] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
    [ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 7.359] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
    [ 7.359] (II) No input driver specified, ignoring this device.
    [ 7.359] (II) This device may have been added with another device file.
    [ 20245.335] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 21030.923] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 21196.939] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 21209.255] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 24416.533] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 26177.657] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

  • External monitor not detected - Early 2015 MBA

    I am the IT admin at my company here. Recently, one of the employees started having severe problems with his Mid-2012 MBA, which would only operate in Safe Mode. Because he needs his computer at all times, my initial "solution" was to give him a new MBA, then try to work on the old one. I gave him a brand new "Early 2015" MBA.
    For one day, it worked without issue, but then this morning it stopped detecting the external monitor.
    I have done the following:
    1. Swapping hardware. I've tried this with a DVI to MDP cable, as well as an HDMI cable using an HDMI to MDP adapter and a DVI cable with a DVI to MDP adapter. I've also tries two different monitors, including a brand new one out of the box.
    Note that ALL of these configurations work flawlessly with the 2012 MBA, but the 2015 one doesn't even detect that anything has been plugged in (it does not do the familiar "flash" on the laptop screen).
    2. SMC Reset
    3. "Detect Displays" from the Displays system preference panel.
    4. Plugged another device (a hard drive) into the Thunderbolt/MDP. It works fine.
    Both laptops have OS version 10.10.3
    Any advice would be appreciated.

    I am the IT admin at my company here. Recently, one of the employees started having severe problems with his Mid-2012 MBA, which would only operate in Safe Mode. Because he needs his computer at all times, my initial "solution" was to give him a new MBA, then try to work on the old one. I gave him a brand new "Early 2015" MBA.
    For one day, it worked without issue, but then this morning it stopped detecting the external monitor.
    I have done the following:
    1. Swapping hardware. I've tried this with a DVI to MDP cable, as well as an HDMI cable using an HDMI to MDP adapter and a DVI cable with a DVI to MDP adapter. I've also tries two different monitors, including a brand new one out of the box.
    Note that ALL of these configurations work flawlessly with the 2012 MBA, but the 2015 one doesn't even detect that anything has been plugged in (it does not do the familiar "flash" on the laptop screen).
    2. SMC Reset
    3. "Detect Displays" from the Displays system preference panel.
    4. Plugged another device (a hard drive) into the Thunderbolt/MDP. It works fine.
    Both laptops have OS version 10.10.3
    Any advice would be appreciated.

  • MBP i7 15" - External Monitors not working

    Hi All,
    Ive been using HDTVs over HDMI and Dell Monitors over DVI fine for the last 2 months, but as of a few weeks ago. I cant get any output at all on either connection!
    When I plug in my Miniport adapter, the MBP screen blinks blue (as it usually did, when about to change display settings) but then nothing happens. No external monitor output at all, in any shape or form!
    Similarly, when I plug the HDMI/DVI into the TV, it auto-detects that something has been plugged in and begins trying to auto-detect a signal but to no avail (mean while the macbook screen flicks to blue as described above).
    I refuse to believe that my adapter is knackered, as when plugging and unplugging, both TV and MBP show signs that its trying to connect.
    I've rebooted, and done the SMC reboot, and even uninstalled gfxCardStatus in case that was affecting it, but no Joy.
    I have upgraded to 10.6.5 but I cant be sure when this actually occurred, and as to whether or not this caused the problem.
    Any help would be lovely.
    Kind Regards
    Oli

    I'm struggling with a very similar problem. (Thinkpad W540, K2100, Ultradock 170W)
    I am using 2 external monitors right now in bios display standard mode - it's the only way they work at all for me right now. I have tried uninstalling graphics drivers, enabling advanced mode, and restarting, but none of the external displays are detected. I've also tried updating the dock's firmware, but it doesn't seem to be updating (this may have already been updated).
    Current working setup:
    - 2 x 22" external LCDs connected to Ultradock via DP -> DVI cables
    - Laptop integrated LCD
    Related but not quite as equally frustrating, the integrated LCD does not resume when waking the computer from a sleep state. Only a reboot brings the display back.
    I'd like to connect another 24" display over HDMI, but don't have any confidence of it working since advanced mode is utterly worthless for me at the moment. I'm quite dissatisfied especially since I purchased an extended warranty and last time I called for support Lenovo tried to sell me an additional support plan claiming that software was not covered under my current warranty.

  • W520 external monitor not connecting properly

    W520, Windows 7 (64 bit), NVIDIA Quadro 1000M 2GB DDR3, purchased November 2011.  External monitor: HP 2511x.
    Haven't been able to find this issue in a previous thread.
    In Optimus (preferred) mode, when I plug an external monitor VGA, HDMI or DVI (via displayport) cable into the laptop or mini dock, the laptop LCD goes completely dark (black).  This happens whether the external monitor is turned on or off, for the VGA and HDMI plugs.  If the external monitor is turned off when the displayport plug is inserted, nothing happens:  the laptop screen stays on, but when the external monitor is turned on, with the displayport plug in use, the laptop LCD goes dark.When the plugs are removed, the laptop LCD comes back on, except when the displayport plug is removed (then, the laptop screen stays dark).
    In all cases, the external monitor is not recognized by the laptop, and if turned on at the time (the external monitor), shows a message which reads that it is going to sleep.
    Device Manager shows the Intel and NVIVIA display adapters and does not show the external monitor (because I cannot hook it up without darkening the laptop screen).
    A few months ago I had the Optimus arrangement working, using the NVIDIA control panel to set up a clone mode.  The external monitor worked beautifully.  Then I disconnected from the external monitor for several weeks, and now it will not work.
    The external monitor was used until very recently on a separate PC, which I no longer have, and the external monitor driver was reloaded this morning.
    I welcome sugestions on how to plug into the laptop without causing the laptop screen to go dark, which I think would then allow me to set up the external monitor as desired.
    Thanks,
    RR

    But did you RUN the nVidia driver file that you downloaded???  It is an EXE, and you must RUN it after downloading.
    The fact that your Device Manager -> Display Adapters still shows "Video Controller(VGA compatible)" specifically tells us that you have NOT YET INSTALLED THE CORRECT DRIVER FOR YOUR VIDEO CARD!!!  You are still running with the vanilla generic Microsoft VGA drivers which will work generically and support only minimal capability for EVERY SINGLE VIDEO CARD MANUFACTURED.  It doesn't support all of the capabilities of the K1000M.
    YOU MUST ACTUALLY RUN THE DOWNLOADED DRIVER INSTALLATION FILE EXE, in order to perform the process of actually installing the driver for your "Video Controller(VGA compatible)" device, which of course is really the K1000M.
    Once that driver is correctly installed, it will now appear as "NVIDIA QUADRO K1000M", instead of "Video Controller(VGA compatible)" as you currently show.
    The reason your desktop icons are currently very big, and that everything else is currently very big/enormous, is because your desktop resolution is not set correctly... although it may be set as high as it can go for the moment.  Only when you finally install the true nVidia driver will your default resolution be presented at what the hardware monitor "recommended" resolution should be, which is likely at least 1920x1080 if not 1920x1200.  Then everything will appear "normal size", and at the very least will not appear to be ENORMOUS as you currently see.
    Also, I'm expecting that once you get the correct nVidia driver installed for the K1000M that your external monitor will now work perfectly, and will not black out.
    So... even while you're still using the current vanilla generic MS VGA driver (although again, your mission is to install the nvidia driver for your K1000M), just right-click on the desktop and select "screen resolution" from the popup menu, to get the "screen resolution" dialog window.
    Then click in the "screen resolution" dropdown list to get a dropdown (with a slider) offering you to change resolutions.  Pull the slider up to whatever you want and click, and then push the OK button. You'll then be offered a confirmation dialog window allowing you to click OK or CANCEL within 15 seconds to accept the resoluton change. Click OK to keep what you just set.
    Your desktop icons and everything else will now appear smaller (or at least "normal").  Temporarily, you've got things satisfactory at least.
    But you'll do the same thing again AFTER INSTALLING THE NVIDIA DRIVERS.  This time the dropdown "screen resolution" list will have a slider whose top value will show "recommended", and will probably be 1920x1080 or 1920x1200. Pull the slider all the way up to that value and click. Then again, push OK, and OK to the confirmation.
    Again, your absolute test goal is to see  "NVIDIA QUADRO K1000M" in Device Manager.  You should NOT BE SEEING "VIDEO CONTROLLER (VGA COMPATIBLE)".
    The installation of the nVidia driver will also get you "nVidia Control Panel", where you can then perform additional customizations, such as whether or not you want to use BOTH the laptop screen as well as external monitor configured in either "laptop screen only", or "clone mode" (i.e. duplicate of single desktop on both screens), or "extended mode" (i.e. double-wide desktop extending across both screens), or "external monitor only," (with laptop screen dark).
    Again... YOU MUST RUN THAT DOWNLOADED NVIDIA DRIVER INSTALLATION FILE EXE. It doesn't run itself, unless that's what you have set in your browser when offered the choice of RUN or SAVE.  But if you SAVE it, then you must yourself manually run it after the download completes.
    IT MUST BE RUN TO INSTALL THE DRIVER.  Then you'll see "NVIDIA QUADRO K1000M" in device manager. Until and unless you see that value, if you still see "VIDEO CONTROLLER (VGA COMPATIBLE)" then you have NOT YET DONE WHAT YOU NEED TO DO.
    Understood?

  • External Monitor Not Working With Macbook Pro

    My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
    I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
    I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
    My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
    I need to get this problem fixed ASAP, any help is appreciated.
    Kind Regards,
    Sergee237

    I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

  • External monitor not working

    Hello all,
    I have a PB G3 Series (Wallstreet), running OS 10.2.8. Having trouble running an external monitor. When I start up the computer, I get (on the external display) the Apple logo and the ticking dial for about 15 seconds, but everything after that is displayed on the PB display, and I can't find a way to switch the display in the Preferences.
    I'm sure I'm overlooking something obvious, so be kind, please! Any ideas?
    Thank you!
    Brad

    Brad,
    When you open up the System Preferences do you see a Displays pane?
    I hooked an external monitor to my Wallstreet running 10.3.9. When I opened the Displays preference I had settings for simulcast (mirroring), external and the laptop display in the resolutions window. After unhooking the monitor the only settings that remained where 640x480, 800x600, and 1024x768 resolutions for the laptop.
    Hope this is something new and not something you already know.
    Shane

Maybe you are looking for