External monitor not recognized after upgrading to win 10

After upgrading to Windows 10, my external Samsung monitor isn't recognized. Not sure if I need new drivers from HP or Samsung (they say they don't have anything for me, of course).

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

Similar Messages

External Monitor Not Working After Upgrade

Hello friends.
I upgraded computer and software (Production Premium CS5.5). I use an external deck that is connected through Firewire. Premiere Pro sees the deck but does not output the image/video to it. I even managed to capture from the deck into Premiere without a problem. No matter what I've tried Premiere won't export to the NTSC monitor. It did in Production Studio Premium. With the Premiere software I had before it would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for color calibration. Any help would be greatly appreciated.
CS5.5 Production Premium
Dual DVI monitors
Quadro 2000 video card
Windows pro 7 - 64bit
i7 with 16 gigs ram

>reply below
If you are talking about a different message, saying see "below" or "above" will have zero meaning just as soon as someone posts another message
Post the link to the message... this message is http://forums.adobe.com/thread/960405

External monitor not working after ML upgrade

I have a late 2008 Unibody Macbook and normally use it in clamshell mode with a Samsung 2043NW monitor if I'm in the office. Previously working fine in 10.5.8 through mini display port adapter. Upgraded via fresh install of 10.6.8 to ML, and the monitor flickered on occasionally but otherwise would not work - when it did display it showed the same resolution as the macbook screen i.e. 1280 X 800 instead of 1680 X 1050.
There's a thread here related to this: https://discussions.apple.com/thread/2387462?start=15&tstart=0 but this software was not the answer. I can now view the screen, but it is still being sent a resolution of 1280X800, rather than 1680X1050 (i.e. a fuzzy mess). It also will not work in clamshell mode at all, and just goes to sleep when the case is shut.
Anyone have a solution for this, or have I been 'obsolesced'? Does anyone have a unibody Macbook that DOES work with an external monitor?

OK, now here's an interesting thing - the macbook has begun to work in clamshell mode. This is REALLY weird. Tried again this morning in the hope of getting back the monitor control icon in the toolbar and it booted straight into clamshell mode with the lid shut.
When I first had this running 10.5 it would only work in clamshell mode if you pressed the power button and immediately closed the lid before the screen lit up grey. More recently it has been perfectly happy to enter clamshell mode after a period of use normally, just plugging in the monitor and shutting the lid. It would be nice if this behaviour were to start again soon.

External Monitor Not Working after Mavericks upgrade

I just upgraded to Mavericks and my USB external monitor & VGA external monitor is not being recognized.

I just upgraded to Mac 10.9.
My Sony KLV-32S300A LCD HDMI TV is no longer recognized as external display (neither in mirror nor in 2nd window mode).
External display used to work flawlessly under Mac 10.8.5.
My hardware: MacBook 13-inch, aluminum, late 2008.
So far I have found no workarounds.

External hd not recognized after 8.1 upgrade

my 3 tb seagate external is not being recognized after 8.1 upgrade. plugged in bothe sides of usb ports still no response. lights up when plugged but thats about it. Please help, thanks.

Hi
Is there any specific error message when you plug in your external HDD?
May I know when you upgrade OS to 8.1, this external HDD still attached?
So before your upgrade your OS, this external HDD working fine?
Did you try to attached your external HDD to another PC or laptop?
did you check inside device manager whether your external HDD detected?
may I know the details your external HDD spec and PC spec?
Please provide as much as information that related to this issue

IMac external monitor not working after lion upgrade

Hi,
I have had an external monitor hooked up to my 09' imac for over a year now. I upgraded to Lion and ever since then it hasnt worked but one other random time when I moved and hooked everything back up. Im very tech savy, but this just doesnt make sense. Have combed google to find a solution. I have a Samsung 22in moniter and all the blue power button does is blinks at me. I am using a miniDisplay to DVI connection.
Does anyone have any suggestions other than resetting the ram?

I guess it's possible you've got some kind of hardware problem.... but not likley given it started with you installed your OS.
Here's a few things to try:
1. see if you can borrow another monitor just to be sure your monitor isn't the problem.
2. in System Prefs, and the Displays pane, click on the Detect Displays, then then the Gather Displays. If you get two diffenet display panes, that would lead me to think it's a monitor problem.
3. Lastly, disconnect your 2nd display, and restart. Then Shutdown, reconnect it, and see if that helps.
and of course..
4. make sure that all of your connections and adaptors are tight.

S440 External Monitor not detected after Windows 10 upgrade

Since upgrading from 8.10 to 10 my S440 no longer detects external monitor. Has anyone else encounterred this and have you found a solution?

Hi: See if performing the procedure in Resolution Step 5 at the link below resolves the problem. https://support.microsoft.com/en-us/kb/314060

External monitor not recognized (X200)

Hi,
I have an X200 with Vista
When I connect an external monitor (or projector) it is not recognized. Shift-F7 results in a message that no external monitor is detected. However, if I leave the monitor connected, put the system in standby and then resume, it recognizes the external display.
Any thoughts to how I can get it to recognize without this work-around? Thanks

I had the same problem. I think it's a vista device driver issue. Try this-
Power down your laptop. Plug in the external monitor. Boot the computer - it should default to the external monitor, and Windows should recognize it. Then, shut down normally.
Pull the monitor cable, boot your laptop regularly, reattach the cable, and give it a try.
It worked for me.

Yosemite dual external monitors not recognized?

I upgraded my Macbook Air this morning to Yosemite 10.10 from Mavericks. Now, my Mac only recognizes one of my two external monitors. By this I mean that only one of my two external monitors appears in the Arrangement tab of the Display settings dialog box. This setup worked previously under Mavericks though the mouse motion was jerky on the USB monitor. Is this a bug or does Yosemite not support 2 external monitors? The external monitor that works for Yosemite is connected through the DVI port. The one that no longer works is connected through a USB port via an HDMI to USB adapter. I've rebooted my Mac and the monitor several times and tried the second USB port on my Mac. Both monitors are Samsung though they are different models. Suggestions?

Same issue - but I fixed it! I had the same issues with my MBP while running Mavericks. I tried updated to Yosemite (my co-worker runs Yosemite and has no monitor issues) to no avail. It still did not want to acknowledge any external monitors. Finally I did away with the HDMI connections altogether. I bought to DVI to Thunderbolt cords (Cable Matters, Gold Plated) from Amazon and BOOM! Fixed. Both monitors fire right up every time I plug it up.
I know its not a real fix...its still an issue that Apple needs to address, but it seems to be a great way to get around it until they do. Ive been using these cables for a couple of weeks now and still rocking. I hope this helps someone!
A little history for other to compare to.
MacBook Pro (Retina, 15-inch, Refurbished Late 2013)
Scenario 1: Mavericks 10.9.5
                    Monitor 1: HDMI to HDMI
                    Monitor 2: HDMI to HDMI via Mini to Thunderbolt Adapter
Scenario 2: Mavericks 10.9.5
                    Monitor 1: HDMI to Thunderbolt
                    Monitor 2: HDMI to Thunderbolt
Scenario 3: Yosemite Update
                    Monitor 1: HDMI to Thunderbolt
                    Monitor 2: HDMI to Thunderbolt
Scenario 4: Yosemite Update
                     Monitor 1: DVI to Thunderbolt
                     Monitor 2: DVI to Thunderbolt

Brightness key not working after upgrading to win 10

MY laptop has been upgraded to win 10, but after the update brightness key is not working.

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

BIAS SoundSaver Input Level Not Working after upgrade from Win 8 to 8.1

Have been using BIAS SoundSaver for INport software to digitize music LPs and cassette tapes to load on MP3 player. Worked fine with Windows 8. However, now that I have upgraded to Win 8.1, I can get sound of LPs and cassette tapes but the Input Level that controls the recording level on the software no longer functions. My computer is an HP ENVY Phoenix h9-1355 Desktop Computer with IDT High Definition Audio CODEC. I am wondering if the problem may be with the audio drivers installed on the computer.
This question was solved.
View Solution.

Hi @Alkay
I see that you are having sound issues after your 8.1 upgrade. Did you update to the 8.1 versions of the drivers?
They may be found here: HP ENVY Phoenix h9-1355 Desktop PC Drivers
Is it only the one application seeing this problem?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

Hello need help on weird happenings to my keyboard..
Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
All keys on keyboard is working and touchpad is also working.
But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
what do you think is the problem??
Hardware Issue? or Driver Issue?
please help thank you..

Hello @MysticDragon ,
Welcome to the HP Forums!
I understand some of the keys on your keyboard are not working after installing Windows 7.
I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
Try this:
1. Click Start.
2. Click Control Panel.
3. Click Clock, Language, and Region.
4. Click Region and Language.
5. Click the Keyboards and Languages tab.
6. Click Change keyboards...
7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
8. Click on any other keyboards in the Installed services list.
9. Click Remove.
10. Repeat for all other non-English (United States) keyboards.
You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
Let me know if this works!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

External Monitor Not Working after 10.9.3

I have two Macs which are not working with an external monitor anymore through the thunerbolt port. I have tried different types of connections (HDMI and DVI) and two different external monitors in an attempt to determine the issue. The only common denominator to the issue is the update to 10.9.3 OS X. I have also reset PRAM and changed between mirroring and non mirroring to no avail.
Mac #1:
MacBook Pro8,1
Intel Core i5
2.4ghz
Intel HD Graphics 3000 512MG
External Monitor: Resolution 1920X1080 @60hz
32 Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotatino: Supported
Mac#2:
MacBookAir6,2
Intel Core i5
1.3ghz
Intel HD Graphics 5000
External Monitor: No information as it's not connected at this time.

Well low and behold I tried clearing PRAM again and I reset my monitor to factory defaults. Reconnected my monitor and the thing works now. Very strange but I'm Happy that it's working again. *WHEW*

External monitor blue screen after upgrade

My external monitor has a blue screen with menu bar after updating 10.6.8 to Yosemite. I can't apply a wallpaper as before. Is there a fix?

>reply below
If you are talking about a different message, saying see "below" or "above" will have zero meaning just as soon as someone posts another message
Post the link to the message... this message is http://forums.adobe.com/thread/960405

External monitor not working - software upgrade

Use an external LG monitor with my Macbook at work - has worked like a charm. There was an Apple software upgrade this weekend - today, when I came back to work, I can't get my external monitor to work. The Mac doesn't see that it's there and the monitor's stuck in Power Save Mode.
Thoughts?

I have reset the PRAM and confirmed that the monitor and cable are functioning properly, but still no change.

External monitor not recognized after upgrading to win 10

Similar Messages

Maybe you are looking for