External monitor not showing up

Hi,
  I recently bought a Macbook pro 2.4 gHz  OS 10.6.4. I am trying to use an external monitor with it. I bought a Mini display to dvi connector.  When I connect it, it sees the monitor as my Dell ST2010, but won't display. I now about mirroring and stuff. I'm thinking it might be a bad mini display adaptor, but it sees the monitor name as the Dell. So not sure.
any suggestions?
thanks, Jason

Hi Jason,
First, run all the updates in Software Update and repair permissions.
If that doesn't do it, try an SMC reset:
http://support.apple.com/kb/HT3964

Similar Messages

  • External Monitor not showing.

    Good Day All,
    I seem to be having problems with setting up my external monitor...
    I have a JVC tape deck, I forgot the model, and a SONY TV(forgot the model).
    What I did was I used a firewire plugged it to the back of my g5 then onto my tape deck. From my tape deck to my TV.
    Then I set my stuff all up in FCP.
    1. VIEW> Using FIREWIRED DV PAL
    (As a note my FCP recognizes the FIREWIRE becoz when I unplug the firewire the FCP notices and gives a warning)
    2. VIEW> Set to ALL FRAMES.
    3. Mirrored on Desktop.
    And when I Log and Capture I see the footage on the TV and on my monitor and yes I closed the Log and Capture window before i do anything.
    I also turned on the tv and the tape deck then i turn on the FCP and it recognizes it.
    These equipment I've used before and WAS working, but the office moved so the stuff was moved. But now, nothing i do works...PLS I NEED HELP. I'm Making a presentation so I need my monitor.
    Pls and TNX!!!
    If it helps... I also have 2 CPU monitors attached to my G5(my secondary and primary).When I set my playback to Digital Main/Secondary they work. I've also tried disconnecting the other monitor incase that hampers the process.
    Thank you very much!

    Shane's Stock Answer #8: External Monitor Viewing
    If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/Monitor via RCA or S-Video.
    Then start up your camera and tv, then open fcp.
    Go to the View Menu, choose > External video > all frames
    VIEW>Video playback should be Apple firewire NTSC (If you are using an NTSC set)
    VIEW>Audio playback should be Audio follows Video
    Techinially, this should send synched video to your TV
    If for some reason you can't view your timeline on your external monitor, there are a few things to try:
    1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
    2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
    3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
    4) Click in the % box above the image and select FIT TO WINDOW.
    5) Go to VIEW->refresh A/V devices
    6) Make sure the Log & Capture window is closed
    If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
    If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
    If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
    The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.
    Shane

  • W540 + Ultradock: External monitors not showing correct maximum resolution

    I have three 20" LCD monitors and the Ultra Dock.  I am connecting them as: 1 with VGA, 1 with DisplayPort to DVI cable and 1 with DVI cable. 
    The ones one the DisplayPort and one with DVI both show a max resolution of 1280x1024 even though the monitor has a native resolution of 1600x1200.  The VGA connected monitor shows the correct maximum resolution.
    When I connect the DVI cable to into the mini-displayport connection on the laptop itself, that same monitor shows the proper 1600x1200 resolution.
    Is there some limitation here preventing me from using the full 1600x1200 resolution through the dock?
    Solved!
    Go to Solution.

    Solved!
    My dock already had the same version as the update file.  Plus, the description of item fixed did not match my issue.  I had no blinking or missing screens, I had too low of resolution.
    ...But I have found the solution on my own.
    Surprisingly I have not see it discussed anywhere on this forum.  I found the answer here:
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gjde49ww.txt
    It contains the following information:
    In Standard mode, all dock displays uses Integrated Graphics as display output
    and is limited to a maximum of 3 displays including Computer's LCD.
    While in Advanced mode, all dock displays uses Discrete Graphics as display
    output and it increases the maximum number of displays to 6 including Computer's LCD.
    Also:
    ThinkPad W540 (Standard Mode)
    Intel HD Graphics
    - (Computer's LCD)
    - Computer's analog VGA connector
    - Computer's DisplayPort connector
    - Docking Station's analog VGA connector
    - Docking Station's DVI connector(s)
    - Docking Station's DisplayPort connector(s)
    - Docking Station's HDMI connector
    NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
    - No display is connected to this display adapter.
    ThinkPad W540 (Advanced Mode)
    Intel HD Graphics Family
    - (Computer's LCD)
    - Computer's analog VGA connector
    - Computer's DisplayPort connector
    NVIDIA Quadro K2100M or NVIDIA Quadro K1100M
    - Docking Station's analog VGA connector
    - Docking Station's DVI connector(s)
    - Docking Station's DisplayPort connector(s)
    - Docking Station's HDMI connector
    Something about this really prevents the resolution I wanted.
    I switched to advanced mode in the BIOS as such:
    The procedure below allows user to select "Standard mode" or "Advanced mode"
    1. Power off the computer.
    2. Power on the computer.
    3. While the "To interrupt normal startup, press Enter" message is displayed
    at the lower-left area or lower-center area of the screen, press the F1 key.
    The ThinkPad Setup menu will be displayed.
    4. Choose "Config" then "Display" to show the menu.
    5. Select "Video Mode on Dock" and press Enter.
    6. Select "Standard" or "Advanced" for your preference
    7. Press F10 key and select "Yes" to save and exit from Setup menu. Then the
    computer is restarted.
    After a few reboots, I have proper resolution on all displays.
    Not sure if there are any downsides to advanced mode, but it certainly feels like it is my solution.  This gets me back to what just worked fine with the W530 I had before this.

  • USB External drive not showing in Finder, or on Desktop

    I have two USB external drives from the same manufacturer. One is for regular storage, the second is for Time Machine and movies.
    The first one shows everywhere, on the desktop, in finder and in Disk Utility.
    The second drive shows in Disk Utility only. However, it is functioning fine with Time Machine. So it is mounted. I have tried several repairs, and it reports no fault found. So it is certainly functioning correctly, but a setting or error in the operating system is not allowing it to be viewed in finder, or on the desktop.
    Any suggestions.

    Correction: Title should be Firewire External drive not showing in Finder, or on Desktop.

  • External drive not showing in sidebar

    I have set my Finder Preferences for the Sidebar to show connected servers and external drives. However, I can not get a mounted external drive to show under Devices in the sidebar. It has appeared previously, but now I can't get it to stick on the sidebar when dragging the external drive from the finder window to the sidebar. Noticed some older posts on the Internet from others experiencing this issue. Is there a fix?
    MacBook Pro RD, early 2013, OS 10.8.5, with attached Dell external monitor.

    Can you see it in Disk Utility? If so, try the mount command in the top menu bar.
    You can also try deleting the Finder .plist.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
    Re-launch Finder by logging out/in and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it  from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • External monitor not working after ML upgrade

    I have a late 2008 Unibody Macbook and normally use it in clamshell mode with a Samsung 2043NW monitor if I'm in the office. Previously working fine in 10.5.8 through mini display port adapter. Upgraded via fresh install of 10.6.8 to ML, and the monitor flickered on occasionally but otherwise would not work - when it did display it showed the same resolution as the macbook screen i.e. 1280 X 800 instead of 1680 X 1050.
    There's a thread here related to this: https://discussions.apple.com/thread/2387462?start=15&tstart=0  but this software was not the answer. I can now view the screen, but it is still being sent a resolution of 1280X800, rather than 1680X1050 (i.e. a fuzzy mess). It also will not work in clamshell mode at all, and just goes to sleep when the case is shut.
    Anyone have a solution for this, or have I been 'obsolesced'? Does anyone have a unibody Macbook that DOES work with an external monitor?

    OK, now here's an interesting thing - the macbook has begun to work in clamshell mode. This is REALLY weird. Tried again this morning in the hope of getting back the monitor control icon in the toolbar and it booted straight into clamshell mode with the lid shut.
    When I first had this running 10.5 it would only work in clamshell mode if you pressed the power button and immediately closed the lid before the screen lit up grey. More recently it has been perfectly happy to enter clamshell mode after a period of use normally, just plugging in the monitor and shutting the lid. It would be nice if this behaviour were to start again soon.

  • External monitor not detected

    I just got a Samsung SyncMaster 2033 SW Plus monitor and tried connecting through the DVI port of my MacBook Pro, but its not getting detected. I'm using the mini display port to DVI adapter to connect. The monitor seems to work perfectly when I connected to the VGA port of my PC, but its not even been detected on the mac. I checked system profiler and it says no external monitor connected. Please help!!

    I have a similar problem with my new MBP. I have tried to connect it to my ViewSonic VP920b via the Mini DisplayPort to DVI, but get no video on the external monitor. The system profile shows it as connected, and if I turn mirroring on/off, my MBP monitor changes resolution to mirror (or not) the external, but there's no picture, just black screen.
    I've tried
    •closing the lid, connecting the external Mini DisplayPort, then waking without opening the lid,
    •changing the energy saver preferences to each of the 2 graphics card (Graphics Card: better battery life/better performance),
    •changing the external monitor resolution through all the possibilities,
    •restart with the external monitor connected
    •restart without the external monitor, then connect.
    Current settings:
    VIDIA GeForce 9400M:
    Chipset Model: NVIDIA GeForce 9400M
    Type: GPU
    Bus: PCI
    VRAM (Total): 256 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0863
    Revision ID: 0x00b1
    ROM Revision: 3448
    gMux Version: 1.8.8
    Displays:
    Color LCD:
    Resolution: 1440 x 900
    Pixel Depth: 32-Bit Color (ARGB8888)
    Mirror: On
    Mirror Status: Hardware Mirror
    Online: Yes
    Built-In: Yes
    VP920 Series:
    Resolution: 1280 x 1024 @ 60 Hz
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: On
    Mirror Status: Master Mirror
    Online: Yes
    Rotation: Supported
    Since the System Profile software can contact the monitor, and since the MBP screen changes in response to connecting or disconnecting the external monitor, I believe it's safe to assume there is no problem with the DVI cable or the MiniPort Display dongle. I just have no video displayed on the external monitor
    Any suggestions?

  • External monitor not recognized!

    I have a Philips 180P2 external monitor hooked up to my iMac 2.8 GHz, 24", which was running fine until my upgradte to SL this afternoon. Now (among other little "quirks") the external monitor can't recognize the signal from the iMac ... or rather, the iMac won't display there...
    What's odd is that I had, for example, Safari on the external monitor and, when I start that browser, it won't show as it running on the external Philips monitor ... which isn't running (yes, power is on and cable is plugged in). When I unplug the monitor adapter from the back of the iMac it switches to one-display mode again and Safari is shown on the iMac.
    The system preferences show the monitor and its position fine ... what's going on?!
    Any and all help is REALLY appreciated. Thanks!

    I've had similar problems (see http://discussions.apple.com/thread.jspa?threadID=2132912&tstart=0) with my second monitor. When I downgrade the display of the external to 1600x1000, then the internal monitor of the imac to 1600x 1200, the display on the external is not very good. However, if I then revert the external to 1680x1050 and the internal to 1900x1200 I can get both back to what things were before updating to snow leopard. However, when I then switch off the imac for a while and then switch back on again the external switches back and forward between no display and a fleeting glimpse of the desktop.

  • External monitor not detected on Thinkpad W530 intel-virtual-output

    I'm having problems with connecting my ThinkPad W530 to external monitors since a few months. I'm using NVIDIA Optimus and bumblebee/optirun since the VGA and Mini DisplayPort connectors are only wired to the NVIDIA card om this laptop. For a long time I have executed:
    $ optirun true
    $ intel-virtual-output
    Then I have started the Screens GUI tool in Gnome to setup the placement of the external screen but now the external screen is not present in the GUI tool and xrandr gives me:
    Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
    LVDS1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
    1920x1080 60.00*+ 50.00
    1400x1050 59.98
    1280x1024 60.02
    1280x960 60.00
    1024x768 60.00
    800x600 60.32 56.25
    640x480 59.94
    VGA1 disconnected (normal left inverted right x axis y axis)
    VIRTUAL1 disconnected (normal left inverted right x axis y axis)
    If I select "Discrete mode" and select startup screen as VGA in the BIOS the BIOS and the Grub screens shows on the external monitor but the screen locks on the screen that shows that the system is booting with the linux-ck kernel. This has never worked for me in Arch Linux so that is no surprise. In Ubuntu everything everything worked fine the last time I tried.
    How can I debug this? Why is the external screen not detected any more?

    Thanks, I am not sure exactly how to read the logs but I cannot find anything that is obviously wrong
    Below is my log with an external screen connected via Mini DisplayPort and after running:
    $ optirun true
    $ intel-virtual-output
    a few times, no more logs seem to be added when I connect/disconnect the monitor or when I run the above two commands more times.
    ╰─➤ cat /var/log/Xorg.0.log 1 ↵
    [ 2.616]
    X.Org X Server 1.15.0
    Release Date: 2013-12-27
    [ 2.616] X Protocol Version 11, Revision 0
    [ 2.616] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2.616] Current Operating System: Linux ethuil 3.13.9-1-ck #1 SMP PREEMPT Fri Apr 4 15:50:10 EDT 2014 x86_64
    [ 2.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet rcutree.rcu_idle_gp_delay=1
    [ 2.616] Build Date: 09 January 2014 08:47:24AM
    [ 2.616]
    [ 2.616] Current version of pixman: 0.32.4
    [ 2.616] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2.616] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2.616] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 22:09:08 2014
    [ 2.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2.627] (==) No Layout section. Using the first Screen section.
    [ 2.627] (==) No screen section available. Using defaults.
    [ 2.627] (**) |-->Screen "Default Screen Section" (0)
    [ 2.627] (**) | |-->Monitor "<default monitor>"
    [ 2.628] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2.628] (==) Automatically adding devices
    [ 2.628] (==) Automatically enabling devices
    [ 2.628] (==) Automatically adding GPU devices
    [ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2.638] Entry deleted from font path.
    [ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2.638] Entry deleted from font path.
    [ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2.638] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 2.638] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2.638] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2.638] (II) Loader magic: 0x804c80
    [ 2.638] (II) Module ABI versions:
    [ 2.638] X.Org ANSI C Emulation: 0.4
    [ 2.638] X.Org Video Driver: 15.0
    [ 2.638] X.Org XInput driver : 20.0
    [ 2.638] X.Org Server Extension : 8.0
    [ 2.639] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 3.588] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
    [ 3.588] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
    [ 3.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 3.589] Initializing built-in extension Generic Event Extension
    [ 3.589] Initializing built-in extension SHAPE
    [ 3.589] Initializing built-in extension MIT-SHM
    [ 3.589] Initializing built-in extension XInputExtension
    [ 3.589] Initializing built-in extension XTEST
    [ 3.589] Initializing built-in extension BIG-REQUESTS
    [ 3.589] Initializing built-in extension SYNC
    [ 3.589] Initializing built-in extension XKEYBOARD
    [ 3.589] Initializing built-in extension XC-MISC
    [ 3.589] Initializing built-in extension SECURITY
    [ 3.589] Initializing built-in extension XINERAMA
    [ 3.589] Initializing built-in extension XFIXES
    [ 3.589] Initializing built-in extension RENDER
    [ 3.589] Initializing built-in extension RANDR
    [ 3.589] Initializing built-in extension COMPOSITE
    [ 3.589] Initializing built-in extension DAMAGE
    [ 3.589] Initializing built-in extension MIT-SCREEN-SAVER
    [ 3.589] Initializing built-in extension DOUBLE-BUFFER
    [ 3.589] Initializing built-in extension RECORD
    [ 3.589] Initializing built-in extension DPMS
    [ 3.589] Initializing built-in extension Present
    [ 3.590] Initializing built-in extension DRI3
    [ 3.590] Initializing built-in extension X-Resource
    [ 3.590] Initializing built-in extension XVideo
    [ 3.590] Initializing built-in extension XVideo-MotionCompensation
    [ 3.590] Initializing built-in extension XFree86-VidModeExtension
    [ 3.590] Initializing built-in extension XFree86-DGA
    [ 3.590] Initializing built-in extension XFree86-DRI
    [ 3.590] Initializing built-in extension DRI2
    [ 3.590] (II) "glx" will be loaded by default.
    [ 3.590] (II) LoadModule: "dri2"
    [ 3.590] (II) Module "dri2" already built-in
    [ 3.590] (II) LoadModule: "glamoregl"
    [ 3.593] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 3.615] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 3.615] compiled for 1.15.0, module version = 0.6.0
    [ 3.615] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 3.615] (II) LoadModule: "glx"
    [ 3.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 3.618] (II) Module glx: vendor="X.Org Foundation"
    [ 3.618] compiled for 1.15.0, module version = 1.0.0
    [ 3.618] ABI class: X.Org Server Extension, version 8.0
    [ 3.618] (==) AIGLX enabled
    [ 3.618] Loading extension GLX
    [ 3.618] (==) Matched intel as autoconfigured driver 0
    [ 3.618] (==) Matched intel as autoconfigured driver 1
    [ 3.618] (==) Matched modesetting as autoconfigured driver 2
    [ 3.618] (==) Matched fbdev as autoconfigured driver 3
    [ 3.618] (==) Matched vesa as autoconfigured driver 4
    [ 3.618] (==) Assigned the driver to the xf86ConfigLayout
    [ 3.618] (II) LoadModule: "intel"
    [ 3.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 3.623] (II) Module intel: vendor="X.Org Foundation"
    [ 3.623] compiled for 1.15.0, module version = 2.99.911
    [ 3.623] Module class: X.Org Video Driver
    [ 3.623] ABI class: X.Org Video Driver, version 15.0
    [ 3.623] (II) LoadModule: "modesetting"
    [ 3.624] (WW) Warning, couldn't open module modesetting
    [ 3.624] (II) UnloadModule: "modesetting"
    [ 3.624] (II) Unloading modesetting
    [ 3.624] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 3.624] (II) LoadModule: "fbdev"
    [ 3.624] (WW) Warning, couldn't open module fbdev
    [ 3.624] (II) UnloadModule: "fbdev"
    [ 3.624] (II) Unloading fbdev
    [ 3.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 3.624] (II) LoadModule: "vesa"
    [ 3.624] (WW) Warning, couldn't open module vesa
    [ 3.624] (II) UnloadModule: "vesa"
    [ 3.624] (II) Unloading vesa
    [ 3.624] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 3.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 3.624] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
    [ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
    [ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
    [ 3.624] (++) using VT number 1
    [ 3.625] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
    [ 3.625] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
    [ 3.625] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 3.625] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 3.625] (==) intel(0): RGB weight 888
    [ 3.625] (==) intel(0): Default visual is TrueColor
    [ 3.625] (**) intel(0): Framebuffer tiled
    [ 3.625] (**) intel(0): Pixmaps tiled
    [ 3.625] (**) intel(0): "Tear free" disabled
    [ 3.625] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 3.625] (II) intel(0): Output LVDS1 has no monitor section
    [ 3.625] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 3.625] (II) intel(0): Output VGA1 has no monitor section
    [ 3.625] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 3.625] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
    [ 3.625] (==) intel(0): DPI set to (96, 96)
    [ 3.625] (II) Loading sub module "dri2"
    [ 3.625] (II) LoadModule: "dri2"
    [ 3.625] (II) Module "dri2" already built-in
    [ 3.625] (==) Depth 24 pixmap format is 32 bpp
    [ 3.627] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
    [ 3.627] (==) intel(0): Backing store enabled
    [ 3.627] (==) intel(0): Silken mouse enabled
    [ 3.628] (II) intel(0): HW Cursor enabled
    [ 3.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 3.628] (==) intel(0): DPMS enabled
    [ 3.628] (II) intel(0): [DRI2] Setup complete
    [ 3.628] (II) intel(0): [DRI2] DRI driver: i965
    [ 3.628] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 3.628] (II) intel(0): direct rendering: DRI2 Enabled
    [ 3.628] (==) intel(0): hotplug detection: "enabled"
    [ 3.628] (--) RandR disabled
    [ 3.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 3.650] (II) AIGLX: enabled GLX_ARB_create_context
    [ 3.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 3.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 3.650] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 3.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 3.650] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 3.650] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 3.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 3.650] (II) AIGLX: Loaded and initialized i965
    [ 3.650] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 3.652] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 3.665] (II) intel(0): Setting screen physical size to 508 x 285
    [ 3.732] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 3.732] (**) Power Button: Applying InputClass "system-keyboard"
    [ 3.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 3.732] (II) LoadModule: "evdev"
    [ 3.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 3.734] (II) Module evdev: vendor="X.Org Foundation"
    [ 3.734] compiled for 1.15.0, module version = 2.8.2
    [ 3.734] Module class: X.Org XInput Driver
    [ 3.734] ABI class: X.Org XInput driver, version 20.0
    [ 3.734] (II) Using input driver 'evdev' for 'Power Button'
    [ 3.734] (**) Power Button: always reports core events
    [ 3.734] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 3.734] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 3.734] (--) evdev: Power Button: Found keys
    [ 3.734] (II) evdev: Power Button: Configuring as keyboard
    [ 3.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 3.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 3.734] (**) Option "xkb_rules" "evdev"
    [ 3.734] (**) Option "xkb_model" "pc104"
    [ 3.734] (**) Option "xkb_layout" "se"
    [ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.754] (**) Video Bus: always reports core events
    [ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.754] (--) evdev: Video Bus: Found keys
    [ 3.754] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
    [ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 3.754] (**) Option "xkb_rules" "evdev"
    [ 3.754] (**) Option "xkb_model" "pc104"
    [ 3.754] (**) Option "xkb_layout" "se"
    [ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.754] (**) Video Bus: always reports core events
    [ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.754] (--) evdev: Video Bus: Found keys
    [ 3.754] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
    [ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 3.754] (**) Option "xkb_rules" "evdev"
    [ 3.754] (**) Option "xkb_model" "pc104"
    [ 3.754] (**) Option "xkb_layout" "se"
    [ 3.755] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 3.755] (II) No input driver specified, ignoring this device.
    [ 3.755] (II) This device may have been added with another device file.
    [ 3.755] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 3.755] (**) Sleep Button: Applying InputClass "system-keyboard"
    [ 3.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 3.755] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 3.755] (**) Sleep Button: always reports core events
    [ 3.755] (**) evdev: Sleep Button: Device: "/dev/input/event2"
    [ 3.755] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 3.755] (--) evdev: Sleep Button: Found keys
    [ 3.755] (II) evdev: Sleep Button: Configuring as keyboard
    [ 3.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
    [ 3.755] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 3.755] (**) Option "xkb_rules" "evdev"
    [ 3.755] (**) Option "xkb_model" "pc104"
    [ 3.755] (**) Option "xkb_layout" "se"
    [ 3.755] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 3.755] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
    [ 3.756] (**) Integrated Camera: Applying InputClass "system-keyboard"
    [ 3.756] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 3.756] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 3.756] (**) Integrated Camera: always reports core events
    [ 3.756] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
    [ 3.756] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
    [ 3.756] (--) evdev: Integrated Camera: Found keys
    [ 3.756] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 3.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
    [ 3.756] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 3.756] (**) Option "xkb_rules" "evdev"
    [ 3.756] (**) Option "xkb_model" "pc104"
    [ 3.756] (**) Option "xkb_layout" "se"
    [ 3.756] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.756] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.756] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.756] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
    [ 3.756] (II) No input driver specified, ignoring this device.
    [ 3.756] (II) This device may have been added with another device file.
    [ 3.757] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event8)
    [ 3.757] (II) No input driver specified, ignoring this device.
    [ 3.757] (II) This device may have been added with another device file.
    [ 3.757] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
    [ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 3.757] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 3.757] (**) AT Translated Set 2 keyboard: always reports core events
    [ 3.757] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 3.757] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 3.757] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 3.757] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 3.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 3.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 3.757] (**) Option "xkb_rules" "evdev"
    [ 3.757] (**) Option "xkb_model" "pc104"
    [ 3.757] (**) Option "xkb_layout" "se"
    [ 3.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
    [ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 3.757] (II) LoadModule: "synaptics"
    [ 3.757] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 3.758] (II) Module synaptics: vendor="X.Org Foundation"
    [ 3.758] compiled for 1.15.0, module version = 1.7.4
    [ 3.758] Module class: X.Org XInput Driver
    [ 3.758] ABI class: X.Org XInput driver, version 20.0
    [ 3.758] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 3.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.758] (**) Option "Device" "/dev/input/event12"
    [ 3.783] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 3.783] (**) Option "TapButton1" "1"
    [ 3.783] (**) Option "TapButton2" "2"
    [ 3.783] (**) Option "TapButton3" "3"
    [ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
    [ 3.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 3.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 3.793] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 3.794] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 3.794] (II) No input driver specified, ignoring this device.
    [ 3.794] (II) This device may have been added with another device file.
    [ 3.794] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
    [ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
    [ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 3.794] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 3.794] (**) ThinkPad Extra Buttons: always reports core events
    [ 3.794] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
    [ 3.794] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 3.794] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 3.795] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 3.795] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
    [ 3.795] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
    [ 3.795] (**) Option "xkb_rules" "evdev"
    [ 3.795] (**) Option "xkb_model" "pc104"
    [ 3.795] (**) Option "xkb_layout" "se"
    [ 3.799] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
    [ 3.824] (II) UnloadModule: "synaptics"
    [ 3.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
    [ 3.824] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 3.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.824] (**) Option "Device" "/dev/input/event12"
    [ 3.844] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 3.844] (**) Option "TapButton1" "1"
    [ 3.844] (**) Option "TapButton2" "2"
    [ 3.844] (**) Option "TapButton3" "3"
    [ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 3.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
    [ 3.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
    [ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
    [ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 3.854] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 3.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 3.854] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
    [ 3.855] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
    [ 3.855] failed to find screen to remove
    [ 3.855] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
    [ 3.855] (II) config/udev: removing device Video Bus
    [ 3.863] (II) evdev: Video Bus: Close
    [ 3.863] (II) UnloadModule: "evdev"
    [ 3.863] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
    [ 3.863] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.863] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.863] (**) Video Bus: always reports core events
    [ 3.863] (**) evdev: Video Bus: Device: "/dev/input/event13"
    [ 3.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.863] (--) evdev: Video Bus: Found keys
    [ 3.863] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
    [ 3.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 3.863] (**) Option "xkb_rules" "evdev"
    [ 3.863] (**) Option "xkb_model" "pc104"
    [ 3.863] (**) Option "xkb_layout" "se"
    [ 3.863] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
    [ 3.863] (II) config/udev: removing device Video Bus
    [ 3.870] (II) evdev: Video Bus: Close
    [ 3.870] (II) UnloadModule: "evdev"
    [ 3.870] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
    [ 3.870] (**) Video Bus: Applying InputClass "system-keyboard"
    [ 3.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 3.870] (II) Using input driver 'evdev' for 'Video Bus'
    [ 3.870] (**) Video Bus: always reports core events
    [ 3.870] (**) evdev: Video Bus: Device: "/dev/input/event14"
    [ 3.870] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 3.870] (--) evdev: Video Bus: Found keys
    [ 3.870] (II) evdev: Video Bus: Configuring as keyboard
    [ 3.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
    [ 3.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 3.870] (**) Option "xkb_rules" "evdev"
    [ 3.870] (**) Option "xkb_model" "pc104"
    [ 3.870] (**) Option "xkb_layout" "se"
    [ 4.540] (II) intel(0): EDID vendor "LEN", prod id 16562
    [ 4.540] (II) intel(0): Printing DDC gathered Modelines:
    [ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
    [ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
    [ 7.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
    [ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
    [ 7.358] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 7.358] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 7.358] (**) Option "Emulate3Buttons" "false"
    [ 7.358] (**) Option "EmulateWheel" "true"
    [ 7.358] (**) Option "EmulateWheelButton" "2"
    [ 7.358] (**) Option "YAxisMapping" "4 5"
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 7.358] (**) Option "XAxisMapping" "6 7"
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
    [ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 7.358] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event15"
    [ 7.358] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
    [ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 7.359] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
    [ 7.359] (II) No input driver specified, ignoring this device.
    [ 7.359] (II) This device may have been added with another device file.
    [ 20245.335] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 21030.923] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 21196.939] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 21209.255] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 24416.533] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
    [ 26177.657] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

  • MBP i7 15" - External Monitors not working

    Hi All,
    Ive been using HDTVs over HDMI and Dell Monitors over DVI fine for the last 2 months, but as of a few weeks ago. I cant get any output at all on either connection!
    When I plug in my Miniport adapter, the MBP screen blinks blue (as it usually did, when about to change display settings) but then nothing happens. No external monitor output at all, in any shape or form!
    Similarly, when I plug the HDMI/DVI into the TV, it auto-detects that something has been plugged in and begins trying to auto-detect a signal but to no avail (mean while the macbook screen flicks to blue as described above).
    I refuse to believe that my adapter is knackered, as when plugging and unplugging, both TV and MBP show signs that its trying to connect.
    I've rebooted, and done the SMC reboot, and even uninstalled gfxCardStatus in case that was affecting it, but no Joy.
    I have upgraded to 10.6.5 but I cant be sure when this actually occurred, and as to whether or not this caused the problem.
    Any help would be lovely.
    Kind Regards
    Oli

    I'm struggling with a very similar problem. (Thinkpad W540, K2100, Ultradock 170W)
    I am using 2 external monitors right now in bios display standard mode - it's the only way they work at all for me right now. I have tried uninstalling graphics drivers, enabling advanced mode, and restarting, but none of the external displays are detected. I've also tried updating the dock's firmware, but it doesn't seem to be updating (this may have already been updated).
    Current working setup:
    - 2 x 22" external LCDs connected to Ultradock via DP -> DVI cables
    - Laptop integrated LCD
    Related but not quite as equally frustrating, the integrated LCD does not resume when waking the computer from a sleep state. Only a reboot brings the display back.
    I'd like to connect another 24" display over HDMI, but don't have any confidence of it working since advanced mode is utterly worthless for me at the moment. I'm quite dissatisfied especially since I purchased an extended warranty and last time I called for support Lenovo tried to sell me an additional support plan claiming that software was not covered under my current warranty.

  • W520 external monitor not connecting properly

    W520, Windows 7 (64 bit), NVIDIA Quadro 1000M 2GB DDR3, purchased November 2011.  External monitor: HP 2511x.
    Haven't been able to find this issue in a previous thread.
    In Optimus (preferred) mode, when I plug an external monitor VGA, HDMI or DVI (via displayport) cable into the laptop or mini dock, the laptop LCD goes completely dark (black).  This happens whether the external monitor is turned on or off, for the VGA and HDMI plugs.  If the external monitor is turned off when the displayport plug is inserted, nothing happens:  the laptop screen stays on, but when the external monitor is turned on, with the displayport plug in use, the laptop LCD goes dark.When the plugs are removed, the laptop LCD comes back on, except when the displayport plug is removed (then, the laptop screen stays dark).
    In all cases, the external monitor is not recognized by the laptop, and if turned on at the time (the external monitor), shows a message which reads that it is going to sleep.
    Device Manager shows the Intel and NVIVIA display adapters and does not show the external monitor (because I cannot hook it up without darkening the laptop screen).
    A few months ago I had the Optimus arrangement working, using the NVIDIA control panel to set up a clone mode.  The external monitor worked beautifully.  Then I disconnected from the external monitor for several weeks, and now it will not work.
    The external monitor was used until very recently on a separate PC, which I no longer have, and the external monitor driver was reloaded this morning.
    I welcome sugestions on how to plug into the laptop without causing the laptop screen to go dark, which I think would then allow me to set up the external monitor as desired.
    Thanks,
    RR

    But did you RUN the nVidia driver file that you downloaded???  It is an EXE, and you must RUN it after downloading.
    The fact that your Device Manager -> Display Adapters still shows "Video Controller(VGA compatible)" specifically tells us that you have NOT YET INSTALLED THE CORRECT DRIVER FOR YOUR VIDEO CARD!!!  You are still running with the vanilla generic Microsoft VGA drivers which will work generically and support only minimal capability for EVERY SINGLE VIDEO CARD MANUFACTURED.  It doesn't support all of the capabilities of the K1000M.
    YOU MUST ACTUALLY RUN THE DOWNLOADED DRIVER INSTALLATION FILE EXE, in order to perform the process of actually installing the driver for your "Video Controller(VGA compatible)" device, which of course is really the K1000M.
    Once that driver is correctly installed, it will now appear as "NVIDIA QUADRO K1000M", instead of "Video Controller(VGA compatible)" as you currently show.
    The reason your desktop icons are currently very big, and that everything else is currently very big/enormous, is because your desktop resolution is not set correctly... although it may be set as high as it can go for the moment.  Only when you finally install the true nVidia driver will your default resolution be presented at what the hardware monitor "recommended" resolution should be, which is likely at least 1920x1080 if not 1920x1200.  Then everything will appear "normal size", and at the very least will not appear to be ENORMOUS as you currently see.
    Also, I'm expecting that once you get the correct nVidia driver installed for the K1000M that your external monitor will now work perfectly, and will not black out.
    So... even while you're still using the current vanilla generic MS VGA driver (although again, your mission is to install the nvidia driver for your K1000M), just right-click on the desktop and select "screen resolution" from the popup menu, to get the "screen resolution" dialog window.
    Then click in the "screen resolution" dropdown list to get a dropdown (with a slider) offering you to change resolutions.  Pull the slider up to whatever you want and click, and then push the OK button. You'll then be offered a confirmation dialog window allowing you to click OK or CANCEL within 15 seconds to accept the resoluton change. Click OK to keep what you just set.
    Your desktop icons and everything else will now appear smaller (or at least "normal").  Temporarily, you've got things satisfactory at least.
    But you'll do the same thing again AFTER INSTALLING THE NVIDIA DRIVERS.  This time the dropdown "screen resolution" list will have a slider whose top value will show "recommended", and will probably be 1920x1080 or 1920x1200. Pull the slider all the way up to that value and click. Then again, push OK, and OK to the confirmation.
    Again, your absolute test goal is to see  "NVIDIA QUADRO K1000M" in Device Manager.  You should NOT BE SEEING "VIDEO CONTROLLER (VGA COMPATIBLE)".
    The installation of the nVidia driver will also get you "nVidia Control Panel", where you can then perform additional customizations, such as whether or not you want to use BOTH the laptop screen as well as external monitor configured in either "laptop screen only", or "clone mode" (i.e. duplicate of single desktop on both screens), or "extended mode" (i.e. double-wide desktop extending across both screens), or "external monitor only," (with laptop screen dark).
    Again... YOU MUST RUN THAT DOWNLOADED NVIDIA DRIVER INSTALLATION FILE EXE. It doesn't run itself, unless that's what you have set in your browser when offered the choice of RUN or SAVE.  But if you SAVE it, then you must yourself manually run it after the download completes.
    IT MUST BE RUN TO INSTALL THE DRIVER.  Then you'll see "NVIDIA QUADRO K1000M" in device manager. Until and unless you see that value, if you still see "VIDEO CONTROLLER (VGA COMPATIBLE)" then you have NOT YET DONE WHAT YOU NEED TO DO.
    Understood?

  • External Monitor Not Working With Macbook Pro

    My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
    I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
    I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
    My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
    I need to get this problem fixed ASAP, any help is appreciated.
    Kind Regards,
    Sergee237

    I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

  • External HD not showing up on Desktop

    I've been using a WD 500gb Firewire HD for my Time Machine backup for some time now without problem. Just noticed that the WD disc is not showing up on my G5 iMac Desktop and the last backup was on March 8. I've tried unplugging the WD drive, disconnecting the firewire cable, etc., but I haven't figured out how to get the external HD to remount. This has happened occasionally in the past and some seemingly random combination of unplugging, disconnecting seems to get it to remount. When I go into Disc Utility it doesn't show up. Any advice appreciated.
    Thanks, Jim

    kaks4 wrote:
    i am having the same issue. the external HD appears in disk utility but not as a mounted drive
    when i run disk utility repair, its unable to repair it and gives me a "sibling link error"
    If Disk Utility can't repair it, a heavy-duty 3rd-party disk repair app might or might not. DiskWarrior is probably recommended here most often. It's about $100. There are some less expensive ones, for less money. Check with Google, VersionTracker.com, MacUpdate.com, and the like.
    If neither can repair it, you might be able to erase and re-use it with Disk Utility, but it's probably dead or dying.
    Is this a TM drive, or does it have other data on it?
    If it's other data, you do have it backed-up, don't you?

  • External HD not showing up on my new Macbook Air but works on iMAC

    Hi,
    I am struggling to get my new Air book 11" to work with my external drive. it is visible on my iMac but does not show up at all on my Air Book. Can some one advice? I have done all possible options including resets, reformat, preference check etc... but still invain. Please help? all other USB drives work normal.

    have you tried plugging the hard drive into a different usb drive. i mean you never know.

  • External drive not showing up on desktop

    I have an external hard drive (2T Newertech ministack). We had a power outage the other day. Even though the drive is on it no longer appears on the desktop. I went to Disk Utility and see if it could be repaired but the drive is not even showing up there. Does this mean the ministack was fried by the outage or is there another way I can save it? And yes, the finder preferences are on for external drives to show up on desktop.

    It's not likely it would be fried if it's connected to a UPS because then it would not lose power and crash. Have you tried disconnecting the device from the computer, rebooting the computer, then reconnecting the device?
    Since you have another Mac try directly connecting the device to it and using Disk Utility to repair the drive. Then give it a try on the other computer.

Maybe you are looking for