External Monitor Not Working After Upgrade

Hello friends.
I upgraded computer and software (Production Premium CS5.5). I use an external deck that is connected through Firewire. Premiere Pro sees the deck but does not output the image/video to it. I even managed to capture from the deck into Premiere without a problem. No matter what I've tried Premiere won't export to the NTSC monitor. It did in Production Studio Premium. With the Premiere software I had before it would export any SD NTSC image or video. I produce a weekly television show and my external NTSC monitor is a must for color calibration. Any help would be greatly appreciated.
CS5.5 Production Premium
Dual DVI monitors
Quadro 2000 video card
Windows pro 7 - 64bit
i7 with 16 gigs ram

>reply below
If you are talking about a different message, saying see "below" or "above" will have zero meaning just as soon as someone posts another message
Post the link to the message... this message is http://forums.adobe.com/thread/960405

Similar Messages

External monitor not working - software upgrade

Use an external LG monitor with my Macbook at work - has worked like a charm. There was an Apple software upgrade this weekend - today, when I came back to work, I can't get my external monitor to work. The Mac doesn't see that it's there and the monitor's stuck in Power Save Mode.
Thoughts?

I have reset the PRAM and confirmed that the monitor and cable are functioning properly, but still no change.

External monitor not working after ML upgrade

I have a late 2008 Unibody Macbook and normally use it in clamshell mode with a Samsung 2043NW monitor if I'm in the office. Previously working fine in 10.5.8 through mini display port adapter. Upgraded via fresh install of 10.6.8 to ML, and the monitor flickered on occasionally but otherwise would not work - when it did display it showed the same resolution as the macbook screen i.e. 1280 X 800 instead of 1680 X 1050.
There's a thread here related to this: https://discussions.apple.com/thread/2387462?start=15&tstart=0 but this software was not the answer. I can now view the screen, but it is still being sent a resolution of 1280X800, rather than 1680X1050 (i.e. a fuzzy mess). It also will not work in clamshell mode at all, and just goes to sleep when the case is shut.
Anyone have a solution for this, or have I been 'obsolesced'? Does anyone have a unibody Macbook that DOES work with an external monitor?

OK, now here's an interesting thing - the macbook has begun to work in clamshell mode. This is REALLY weird. Tried again this morning in the hope of getting back the monitor control icon in the toolbar and it booted straight into clamshell mode with the lid shut.
When I first had this running 10.5 it would only work in clamshell mode if you pressed the power button and immediately closed the lid before the screen lit up grey. More recently it has been perfectly happy to enter clamshell mode after a period of use normally, just plugging in the monitor and shutting the lid. It would be nice if this behaviour were to start again soon.

External Monitor Not Working after Mavericks upgrade

I just upgraded to Mavericks and my USB external monitor & VGA external monitor is not being recognized.

I just upgraded to Mac 10.9.
My Sony KLV-32S300A LCD HDMI TV is no longer recognized as external display (neither in mirror nor in 2nd window mode).
External display used to work flawlessly under Mac 10.8.5.
My hardware: MacBook 13-inch, aluminum, late 2008.
So far I have found no workarounds.

IMac external monitor not working after lion upgrade

Hi,
I have had an external monitor hooked up to my 09' imac for over a year now. I upgraded to Lion and ever since then it hasnt worked but one other random time when I moved and hooked everything back up. Im very tech savy, but this just doesnt make sense. Have combed google to find a solution. I have a Samsung 22in moniter and all the blue power button does is blinks at me. I am using a miniDisplay to DVI connection.
Does anyone have any suggestions other than resetting the ram?

I guess it's possible you've got some kind of hardware problem.... but not likley given it started with you installed your OS.
Here's a few things to try:
1. see if you can borrow another monitor just to be sure your monitor isn't the problem.
2. in System Prefs, and the Displays pane, click on the Detect Displays, then then the Gather Displays. If you get two diffenet display panes, that would lead me to think it's a monitor problem.
3. Lastly, disconnect your 2nd display, and restart. Then Shutdown, reconnect it, and see if that helps.
and of course..
4. make sure that all of your connections and adaptors are tight.

External monitor not recognized after upgrading to win 10

After upgrading to Windows 10, my external Samsung monitor isn't recognized. Not sure if I need new drivers from HP or Samsung (they say they don't have anything for me, of course).

Hello I managed to solve my problem of brightness key not working by Installing the Intel HD Graphic 3000 Driver from Intel official site. So if your Graphic card is Intel HD 3000 Graphic and your system is 64 Bit OS then you can follow the below link to download it and install.....https://downloadcenter.intel.com/download/24971/Intel-HD-Graphics-Driver-for-Windows-7-8-64-bit Note :- This Graphic driver only support the following intel Processor And If Your Are still running the built in intel graphic card, then only download it and install at you own risk.Supports Intel(R) HD graphics on: 2nd generation Intel(R) Core(TM) i3 processor 2nd generation Intel(R) Core(TM) i5 processor 2nd generation Intel(R) Core(TM) i5 vPro(TM) processor 2nd generation Intel(R) Core(TM) i7 processor 2nd generation Intel(R) Core(TM) i7 vPro(TM) processor Intel(R) Pentium(R) Processor 900/B900/G600/G800 Series Intel(R) Celeron(R) Processor 700/800/B700/B800/G400/G500 Series

3 DVI monitor not working after upgrade

I have three monitors connected to my new Mac pro via Active Minidisplay port to DVI adapters. They are all Dell 24" (1 2407,and 2 2405) they worked fine on 10.9.2 but after the upgrade to 10.9.3 only two monitors will work now. Verfiied that I was following Apple's document on connecting the three monitors. If I Disconnect one of the two working monitor the previous blank one would automatically go active.

This issue is caused by a bug in OS X 10.9.3. The following steps have been reported to resolve it in some cases (not all.) If none of them works for you, the only other option is to revert to 10.9.2, which can be done by restoring a pre-update backup. You may prefer to wait for Apple to release another update, but I don't know when that will happen.
1. Reset the System Management Controller.
2. Reset the PRAM.
3. Install the Combo updater.

External Monitor Not Working after 10.9.3

I have two Macs which are not working with an external monitor anymore through the thunerbolt port. I have tried different types of connections (HDMI and DVI) and two different external monitors in an attempt to determine the issue. The only common denominator to the issue is the update to 10.9.3 OS X. I have also reset PRAM and changed between mirroring and non mirroring to no avail.
Mac #1:
MacBook Pro8,1
Intel Core i5
2.4ghz
Intel HD Graphics 3000 512MG
External Monitor: Resolution 1920X1080 @60hz
32 Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotatino: Supported
Mac#2:
MacBookAir6,2
Intel Core i5
1.3ghz
Intel HD Graphics 5000
External Monitor: No information as it's not connected at this time.

Well low and behold I tried clearing PRAM again and I reset my monitor to factory defaults. Reconnected my monitor and the thing works now. Very strange but I'm Happy that it's working again. *WHEW*

External monitor not working after installing latest NVIDA drivers

I have a mid-2010 MacBook Pro. I installed bootcamp and Windows 7 x64. I performed all the Windows updates then installed the Apple Bootcamp driver CD. Everything was working fine and I was able to connect an external LCD monitor using a mini display port to HDMI cable (the LCD only has HDMI ins).
I then came across a piece of Windows software that requires the latest production NVIDIA drivers so I went to the NVIDIA web site and downloaded their installer for the GT330M which is the chipset in this MacBook Pro.
The NVIDIA installers ran fine and installed version 275.33 of their drivers, however, when I hook up the external display the primary display goes black and the external monitor simply cycles through all the inputs like it can't find a signal. When I unplug the mini display adapter from the MBP the MBP screen returns to normal.
Thoughts?
TIA,
-Noah
PS. Windows 7 *****. Took over 3 hours to install and apply all the Windows updates with countless reboots. Lion took under 20 minutes to fresh install.

Well low and behold I tried clearing PRAM again and I reset my monitor to factory defaults. Reconnected my monitor and the thing works now. Very strange but I'm Happy that it's working again. *WHEW*

Spiceworks Network Monitor not working after upgrading to version 1.2

It's the same with my upgrade. Look like we need some oil and vinegar for the pepper ;)

Hello,
I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
The above issue persists whatever restarting the services or rebooting the computer hosting this service.
I also noticed that the size of this release is 682KB which is obviously small compare to old version:
Anyone else experiences the same issue?
Thanks
This topic first appeared in the Spiceworks Community

Samsung External Drive Not Working After Upgrade to 10.9

Hi,
I upgraded to Mavericks (10.9) on Friday and now my external drive does not show up when I connect it to my Macbook Air (2GHz Intel Core i7, 4 GB 1600 MHz DDR3).
My external drive is a 1 TB Samsung S2 Portable Drive.
I am attaching how it appears in Disk Utility now.
Please please can you help me? I'm nervous that I have lost all my personal data.
Thanks,
Emmett

The drive may have some software on it that is incompatible with Mavericks. Not your files that are on the drive, but something from the manufacturer of the drive.
There may be some software on your mac, also from the drive manufacturer, that is usually used for accessing the drive, and this may be incompatible with Mavericks.
Or your drive may just have taken a very inopportune time to die.
I'd try:
a different USB or firewire cable
It would help to give us more information about your computer. If you can, use EtreCheck Etresoft: EtreCheck to generate a system report and paste it in a response here.
Try a safe boot (restart, hold down shift until you see the Apple logo). Then try to mount the drive. If this works, then you know the problem is with some 3rd party software on your mac, probably some utility from the drive manufacturer. Mac OS X: What is Safe Boot, Safe Mode?
TechTool may be able to repair the drive so that you could mount it. Techtool Pro 7
Look on the drive manufacturer's website for an update to the software.
If you have another computer with Mountain Lion on it, perhaps you can use this computer to copy the files, then erase the drive, and then put the files back, without the incompatible software.
Maybe the drive will mount in target mode on your mac or another mac, and you could transfer the files. How to use and troubleshoot FireWire target disk mode

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Ipohone 4 hotspot not working after upgrading to ios7.1 ?

my ipohone 4 hotspot not working after upgrading to ios7.1 but my some friends having iphone 4s its works fine and those having iphone 4 it's not working although we all have same operator and same operating system (i.e ios 7.1).I think this is problem only with iphone 4 users with ios 7.1 , so apple plz fix it in ur next update.

You don't like the answer?
Again it's not a bug, use a supported carrier if you want Personal Hotspot.
Read the list one more time, if carrier is not on the list, IOS7.1 patch the loophole.
Message was edited by: ckuan

Web Service is not working after Upgrade SAP EHP6

Hi ,
Recently we upgraded SAP ECC 6.0 to EHP 6.
We have a custom web service which is consumed in .NET Application to get the Sold To from Sales Order.
the service is working perfectly before upgrade and it is not working after upgrade to EHP6.
When I tested the Service in WS Navigator in SAP, it is working fine.
We raised a message to SAP and SAP analyze the Traces and confirm that the HTTP Request Header coming from .NET application is not having User ID and Password , so it is throwing exception from SAP as unauthorized.
But in service it is configuration as basic authentication and log on using user id and password and .NET application is calling service by passing user ID & Password.
Customer is not happy as it is working before Upgrade and SAP confirmed every thing fine in SAP, but the service is not working.
we did the below steps.
Regenerated the configuration
Re imported the Certificates
Activated the service in SICF.
Please let me know if anybody have same problem or if any steps we are missing.
thanks.
Uma

after changing the .NET Application , Service is working fine.

External Monitor Not Working After Upgrade

Similar Messages

Maybe you are looking for