External Monitor--Stalling and skipping, rendered cross disolves.
I am watching my video on an external monitor. Every now and then during playback, the video freezes and the audio continues, only to start up again after a few seconds. I have remedied this problem by exporting the video once it is done to a Quicktime movie, but it is somewhat annoying during playback. Any ideas?
Second, after I render, I am viewing the video on the external monitor and cross disolves skip irregularly. A transition will skip, I will go back and replay it, and it won't skip again. After exporting, the skips are gone, but it doesn't help during proofing of video. Is there any setting that can remedy this problem.
Thanks for the help.
The first thing Iwould look at would be the RT settings in the timeline. Click on the RT dropdown and make sure you are in "unlimited RT" rather than "Safe RT". Also you might lower the playback quality. I've seen this in Imac G5's with not enough RAM
Mac OS X (10.4.6)
Similar Messages
-
I just bought a new external monitor (ASUS), and it have DVI and VGA plugs. I bought the DVI adapter to connect with my macbook pro laptop. But the external monitor remain black… so I turn it off then turn it back on, it said "No VGA signal". Does it means I have to use VGA adapter instead? I am not sure how it work, I am very new to it… I hope you can help me out!
Thanks!Use the Transfer Purchases command in the File menu of iTunes.
(60931) -
T440 external monitor options and resolution
Hi
I note that the T440 has VGA and DP external monitor ports
Can anyone tell me...
1. How many external monitors can I attach and use simultaneously?
2. What is the maximum external resolution of those monitors?
ThanksThe best connection is DisplayPort. DP 1 and 2 are no different. DVI is also a digital connection and high quality. VGA is fine for most people but is not able to display some of the high end resolutions.
You can only use one connection in each of the numbered connection blocks. For instance, you can use DP1 and DP2 at the same time. You cannot use DP1 and DVI1 at the same time. Nor can you use DP2 and DVI2 at the same time. -
External Monitor, iBook, and SwitchResX
I recently got a 19" external monitor for my ibook this Christmas. The screen image is blurred and stretched. I called both the monitor company and apple, but neither one was helpful.
I saw some discussions about SwitchResX. I downloaded it and have been tinkering with it, but am very confused. Can anyone help me?
ibook g4 Mac OS X (10.3.9)The best connection is DisplayPort. DP 1 and 2 are no different. DVI is also a digital connection and high quality. VGA is fine for most people but is not able to display some of the high end resolutions.
You can only use one connection in each of the numbered connection blocks. For instance, you can use DP1 and DP2 at the same time. You cannot use DP1 and DVI1 at the same time. Nor can you use DP2 and DVI2 at the same time. -
Why does my external monitor name and resolution change when I close the lid?
When I close my lid on my early 2001 MBP, the external monitor reverts to a lower resolution. I am not even able to select the proper resolution.
I am using VGA (I need VGA for my KVM). When the lid is open, the monitor sees the correct monitor, and I can set the correct resolution. When the lid closes, it only shows a genertic VGA monitor and defaults to a lower resolution. I am not able to change the resolution up when I have the lid closed as well. Does anyone have any insight into this?Show Hard Drive on Desktop...
Finder > Preferences > General > Show these items on the Desktop. -
Turning Off LCD when on External Monitor - BootCamp and XP OS
Hello,
Not sure why, but after updating to BootCamp 1.4, the latest Radeon video drivers, and the latest Mac firmware, my MBP no longer shuts off the LCD when hooked up to an external monitor (Samsung 193P on 15 pin analog). Have tried using the CCC program provided by ATI, to no avail. The XP settings also do not seem to make any difference...any thoughts, clues greatly appreciated. Looks like the system sees both the LCD and external as one and the same (listed as monitor one, instead of LCD as one, and external as two).
SteveWhy leave it open?
I don't know about the OP, but when I use my MBP for watching movies on my external LCD TV, I know the space above the F keys gets crazy hot. I don't want to risk closing the LCD screen which lays right on top of that furnace, potentially exposing it to damage--especially since movies are around 2 hours in length.
So I'd rather have my lid open when I watching a movie to let the MBP breathe, but I'd rather not see the MBP's screen lit up (distracts from the movie).
That's my personal reasoning. -
Macbook, External Monitor (TV) and Windows
I have been trying (for ages) to get Windows to display on the TV. I can do it on the Mac side, with a DVI connector, but Windows doesn't work. No that I have upgraded to Leopard, I had hopes. Is there some setting I need to make this work? The Macbook says it is using Intel Mobile adapter.
When the DVI is hooked up in Windows my screen flashes. The external monitor 2 will not accept that it is there.
ThanksAs far as I know, Apple only sells one kind of DVI connector for around $20. Based on your statement about inputs to your TV, you should get an Apple Mini DVI-->DVI cable. Then, you'll need a DVI to HDMI cable to plug into your TV. I don't know your setup, but you probably should get one that is 6' unless you need a longer one.
You will also need a separate audio cable with jacks at each end similar to the kind that fit into your headphone out from your MB. In order to get sound, you will need a audio input that is tied in with your HDMI input. I don't know if your set has this setup. I have a Sony with 3 HDMI inputs, but only one of them has a separate audio input jack. If you don't have this audio input jack, you can run your audio to a separate stereo amp. Or you can go with the Component option which will definitely have an audio input. -
Closed Screen, External Monitor, Heat, and Fans
We have our MBP connected to an external Dell Ultra 22" dvi monitor (awesome!). We use apple BT keyboard and mighty mouse (again awesome!). Now, my concerns:
1. Screen damage from keyboard - I've read (to my disbelief) that mac laptop/portable machines can't be closed without some type of material laid on the keyboard to protect the screen. Is this true? If yes, does this cause a heating problem?
2. We use the MBP for email, web surfing, calendar, etc. Nothing very heavy at all. The fan comes on after 20-30 minutes of working and the machine is very hot (iStat 140F for processor and graphics processor).
Since moving over to mac at the release of the intel processors, I've bought 4 (17" imac, 20" imac, 24" imac, and now a 15" MPB). I do love the look and the OS but some of the issues are kinda silly. I can't believe we tolerate it so well.
Anyway, thanks for looking and any suggestions are greatly appreciated.
Leo1. Screen damage from keyboard - I've read (to my disbelief) that mac laptop/portable machines can't be closed without some type of material laid on the keyboard to protect the screen. Is this true? If yes, does this cause a heating problem?
While many of us use some fabric that sits between the keyboard and the screen, such as ScreenSavrz its not needed. There is some clearance between the keys and the screen. I like it there just to be sure As for creating heating problems I don't keep the fabric on the keys while its own.
2. We use the MBP for email, web surfing, calendar, etc. Nothing very heavy at all. The fan comes on after 20-30 minutes of working and the machine is very hot (iStat 140F for processor and graphics processor).
My MBP runs between 50 and 60c which is right in the ball park of your temps. Ambient temperatures also effect how quickly the MBP will warm up. That is, if its 32c (90f) then the mbp is going to get hotter quicker. I recommend a little app called SmcFanControl It gives you the ability to set the fan speed and thus provide better heat management on your MBP.
Since moving over to mac at the release of the intel processors, I've bought 4 (17" imac, 20" imac, 24" imac, and now a 15" MPB). I do love the look and the OS but some of the issues are kinda silly. I can't believe we tolerate it so well.
Well all computers and operating systems have their own idiosyncacies. Overall I think Macs and OSX are so much superior to windows and Dells that I don't mind some of the stuff we need to put up with -
External Monitoring...how is it for you and what for the future (CS5)
With the prospect of CS5 on the horizon and many of us considering it as the opportunity to up spec O.S,, software and hardware simultaneously (largely due to 64-bit)...I am wondering how everyone is getting on with their external monitoring solutions and what the expectation is for CS5.
In my opinion the way it is now (in CS4) is less than professional and needs sorting out (hopefully in CS5).
Issues are : Video / audio / synching internal and external devices so all play together.
Premiere Pro runs two playback / preview systems : One for scrubbing and source monitoring; the other for Program playback /preview.
(Example : Observe how and when audio plays through the audio mixer or observe what and when video plays through external or internal monitor...then note what happens when you PUSH PLAY - spacebar)
Without repeating the problems in depth, I would like to say how I wish it worked for me as an editor in a Pro environment with clients that sit in my suite as we work together.
I have a two monitor NLE set up plus one external for client viewing (and also for grading /CC).
I need the External Monitor (Video & Audio) and the Internal Monitor (Video and Audio) to playdown together. I dont want one to stop and the other to function.
I want them both working simultaneously playing video and audio. Am I supposed to get out of my chair to wander over to the client monitor to see the changes we just discussed then I actioned in the timeline? !!!!!!
A feature request : I would also like to be able to access the Playback Monitoring via Shortcut keys or On Screen buttons. It is very handy to be able to playback on the second monitor but it should be defaulted at 100% (Not Fit - as per the Program Monitor)
As regards HD. One should not have to install 3rd Party cards to monitor HD externally. The problem with that is one then needs to use the Presets from that card manufacturer. The Presets , eg P2 work so well in PPRO...so why do we need to mess with 3rd party drivers just to monitor.Exactly!
I just like to let people know where is the origin of that shortcut (in previous CS editions it was in PROJECTS menu bar tab, and since CS4 it is in SEQUENCE menu bar tab....
I was trying to figure out what do you thing my "atom like button" )))
Finally figured out that it is the RGB icon (which is more the molecule then atom), but you gave me a hard time looking for atom!!! I thought it is in 3rd place, somewhere, as well - but "Atom" almost remained misteri
Anyway, interestingly enough, I just succeeded in getting my picture out on EXTERNAL CRT monitor through DV-monitoring in playback settings - FireWire through my scope (deck) and to TV....
And picture appeared.... But stood still.... Wouldn't move.... except when scrubbing... But when press PLAY it froze both on external DV monitor and PPRO program monitor in software!!!
Maybe it is my old ATI 3850 HD VGA - and maybe it just can't work!!!!
This pisses me off a bit!!!
I have unpacked copy of new AVID MEDIA COMPOSER 5 - which I have decided not to install until I am through with searching all new possibilities in CS5....
But now, I feel more and more like opening and installing it ----- Just to see how is it managed there!!!
It is hard for me ---- even to think to leave ADOBE ------ it is already enough that 80% of my Clients first ask me "DO YOU HAVE AVID".... and then, to half of them I somehow explain that it is gonna be better if we give ADOBE a chance, and the other half is just hard on their flexibility --- they've heard everything in Hollywood is edited in AVID, so they want their project to be the same....
And I was having a real hard time defending PPRO for years, preventing my Clients to make me switch to AVID - and look what ADOBE did to me now - ADOBE made me reach for my AVID MC v5 and install it and have it ready to take over any project, including the one I am working on right now!
Why, Adobe, Oh, Why!? -
External monitor and home cinema
Hi. I would like to set my macbook air to a external monitor/television and home cinema. please advise how this is done
thanks
nickIn all the the first 2008 MBair, it's done with a Mindisplay port to HDMI adapter and a HDMI cable. that assumes you have a spare HDMI port on the TV.
Here's the adapter.
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er -
MacBook Pro and Mac Air - "external monitor"
Is it possible to connect MacBook Pro and Mac Air and use one as an "external monitor"? And if so, which cable would I need?
Hi Hello1852,
Thank you for using Apple Support Communities.
To use another Mac as a secondary display with your Mac, it will need to be an iMac, not a portable Mac. To learn more about using another Mac as a secondary display, take a look at the article below.
Target Display Mode: Frequently Asked Questions (FAQ)
Cheers,
Alex H. -
Does digital vga cable link from ipad2 to external monitor work with pages and numbers
Are you able toutilize pages and numbers on an external monitor with and ipad2 by utilizing a digital VGA cable
Hi ederg:
You may want to download/update: Monitor file for Windows 7 (Thinkpad)
The reason I say that is because the readme it states, "If you use the preload environment, you do not need this package. This package is required when you install Windows OS without the preload image."
Since you setup the Thinkpad with Windows 7 Pro CD and no longer have the preload image, this may fix the problem.
Also, have you checked the website for the displayport manufacturer? They may have updated drivers there that wouldn't have been on the update tool you used.
*Edit* You can also check the: External monitors issues section here. It goes over some basic troubleshooting you may want to try first (I just came across it now)
Let us know how it turns out!
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem. -
I use KDE and have a HP ProBook 6560b with a dock/port replicator. My problem is that signal to my external monitor doesn't automatically work on login rather it be via VGA or DVI (currently hooked up over DVI). I tinkered around with it and got it to work sometimes but not consistently.
Edit: This also seems to happen in Gnome using Gnome's display config tool.
That aside, my even bigger issue is when I click KRandRTray down in the system tray and change the display settings to what I want, my external monitor goes to sleep and says "no signal." The settings I want are for my laptop's attached LCD panel (LVDS1) to be "Disabled" (since I keep my laptop lid closed in the dock) and I want my externally attached monitor (HDMI2) to be set to 1680x1050 (Auto). The even stranger part of this is I can eventually get this to work if I start it dual monitor, pick my secondary external monitor (HDMI2) and set it's resolution to 1680x1050 (Auto), set primary display to HDMI2, hit apply then go back in and set LVDS1 to "Disabled" and hit apply again.
To add to this, if at any point in time the external monitor goes to "no signal" mode and the settings restore after the countdown, the external monitor will never show signal until I drop out to a console and killall X and it restarts KDM, etc.
I don't have any Xorg.conf (or config files in /etc/X11/xorg.conf.d) that relates to video settings.
The following is my graphics card that is integrated into my Core i5:
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Also, the xf86-video-intel version:
xf86-video-intel 2.15.0-2
This is the entire Xorg.0.log file up to the no signal situation on the external monitor:
[ 13.026]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 13.040] X Protocol Version 11, Revision 0
[ 13.040] Build Operating System: Linux 3.0-ARCH x86_64
[ 13.040] Current Operating System: Linux nathan-cbts 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 13.040] Kernel command line: root=/dev/mapper/vgroot-lvroot ro i915.modeset=1
[ 13.040] Build Date: 17 September 2011 07:42:58AM
[ 13.040]
[ 13.040] Current version of pixman: 0.22.2
[ 13.040] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.040] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.040] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 5 09:06:26 2011
[ 13.074] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.093] (==) Automatically adding devices
[ 13.093] (==) Automatically enabling devices
[ 13.131] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.131] Entry deleted from font path.
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.147] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.147] Entry deleted from font path.
[ 13.147] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.147] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 13.147] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.147] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.147] (II) Loader magic: 0x7d6160
[ 13.147] (II) Module ABI versions:
[ 13.147] X.Org ANSI C Emulation: 0.4
[ 13.147] X.Org Video Driver: 10.0
[ 13.147] X.Org XInput driver : 12.2
[ 13.147] X.Org Server Extension : 5.0
[ 13.148] (--) PCI:*(0:0:2:0) 8086:0116:103c:1619 rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 13.148] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.148] (II) LoadModule: "extmod"
[ 13.149] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.155] (II) Module extmod: vendor="X.Org Foundation"
[ 13.155] compiled for 1.10.4, module version = 1.0.0
[ 13.155] Module class: X.Org Server Extension
[ 13.155] ABI class: X.Org Server Extension, version 5.0
[ 13.155] (II) Loading extension MIT-SCREEN-SAVER
[ 13.155] (II) Loading extension XFree86-VidModeExtension
[ 13.155] (II) Loading extension XFree86-DGA
[ 13.155] (II) Loading extension DPMS
[ 13.155] (II) Loading extension XVideo
[ 13.155] (II) Loading extension XVideo-MotionCompensation
[ 13.155] (II) Loading extension X-Resource
[ 13.155] (II) LoadModule: "dbe"
[ 13.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.156] (II) Module dbe: vendor="X.Org Foundation"
[ 13.156] compiled for 1.10.4, module version = 1.0.0
[ 13.156] Module class: X.Org Server Extension
[ 13.156] ABI class: X.Org Server Extension, version 5.0
[ 13.156] (II) Loading extension DOUBLE-BUFFER
[ 13.156] (II) LoadModule: "glx"
[ 13.156] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.160] (II) Module glx: vendor="X.Org Foundation"
[ 13.160] compiled for 1.10.4, module version = 1.0.0
[ 13.160] ABI class: X.Org Server Extension, version 5.0
[ 13.160] (==) AIGLX enabled
[ 13.160] (II) Loading extension GLX
[ 13.160] (II) LoadModule: "record"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.161] (II) Module record: vendor="X.Org Foundation"
[ 13.161] compiled for 1.10.4, module version = 1.13.0
[ 13.161] Module class: X.Org Server Extension
[ 13.161] ABI class: X.Org Server Extension, version 5.0
[ 13.161] (II) Loading extension RECORD
[ 13.161] (II) LoadModule: "dri"
[ 13.161] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.172] (II) Module dri: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.0.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension XFree86-DRI
[ 13.172] (II) LoadModule: "dri2"
[ 13.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.172] (II) Module dri2: vendor="X.Org Foundation"
[ 13.172] compiled for 1.10.4, module version = 1.2.0
[ 13.172] ABI class: X.Org Server Extension, version 5.0
[ 13.172] (II) Loading extension DRI2
[ 13.172] (==) Matched intel as autoconfigured driver 0
[ 13.172] (==) Matched vesa as autoconfigured driver 1
[ 13.172] (==) Matched fbdev as autoconfigured driver 2
[ 13.172] (==) Assigned the driver to the xf86ConfigLayout
[ 13.172] (II) LoadModule: "intel"
[ 13.177] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.187] (II) Module intel: vendor="X.Org Foundation"
[ 13.187] compiled for 1.10.2, module version = 2.15.0
[ 13.187] Module class: X.Org Video Driver
[ 13.187] ABI class: X.Org Video Driver, version 10.0
[ 13.187] (II) LoadModule: "vesa"
[ 13.187] (WW) Warning, couldn't open module vesa
[ 13.187] (II) UnloadModule: "vesa"
[ 13.187] (II) Unloading vesa
[ 13.187] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 13.187] (II) LoadModule: "fbdev"
[ 13.187] (WW) Warning, couldn't open module fbdev
[ 13.187] (II) UnloadModule: "fbdev"
[ 13.187] (II) Unloading fbdev
[ 13.187] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 13.187] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 13.187] (++) using VT number 7
[ 13.197] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 13.198] drmOpenDevice: node name is /dev/dri/card0
[ 13.198] drmOpenDevice: open result is 8, (OK)
[ 13.198] drmOpenByBusid: drmOpenMinor returns 8
[ 13.198] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 13.198] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 13.198] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 13.198] (==) intel(0): RGB weight 888
[ 13.198] (==) intel(0): Default visual is TrueColor
[ 13.198] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 13.198] (--) intel(0): Chipset: "Sandybridge Mobile (GT2)"
[ 13.198] (**) intel(0): Relaxed fencing enabled
[ 13.198] (**) intel(0): Framebuffer tiled
[ 13.198] (**) intel(0): Pixmaps tiled
[ 13.198] (**) intel(0): 3D buffers tiled
[ 13.198] (**) intel(0): SwapBuffers wait enabled
[ 13.198] (==) intel(0): video overlay key set to 0x101fe
[ 13.208] (II) intel(0): Output LVDS1 has no monitor section
[ 13.208] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 13.208] (II) intel(0): Output VGA1 has no monitor section
[ 13.231] (II) intel(0): Output HDMI1 has no monitor section
[ 13.270] (II) intel(0): Output DP1 has no monitor section
[ 13.395] (II) intel(0): Output HDMI2 has no monitor section
[ 13.418] (II) intel(0): Output HDMI3 has no monitor section
[ 13.456] (II) intel(0): Output DP2 has no monitor section
[ 13.496] (II) intel(0): Output DP3 has no monitor section
[ 13.496] (II) intel(0): EDID for output LVDS1
[ 13.496] (II) intel(0): Manufacturer: SEC Model: 4351 Serial#: 0
[ 13.496] (II) intel(0): Year: 2008 Week: 0
[ 13.496] (II) intel(0): EDID Version: 1.3
[ 13.496] (II) intel(0): Digital Display Input
[ 13.496] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 13.496] (II) intel(0): Gamma: 2.20
[ 13.496] (II) intel(0): No DPMS capabilities specified
[ 13.496] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.496] (II) intel(0): First detailed timing is preferred mode
[ 13.496] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 13.496] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 13.496] (II) intel(0): Manufacturer's mask: 0
[ 13.497] (II) intel(0): Supported detailed timing:
[ 13.497] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 13.497] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1480 h_border: 0
[ 13.497] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 780 v_border: 0
[ 13.497] (II) intel(0): Unknown vendor-specific block f
[ 13.497] (II) intel(0): SAMSUNG
[ 13.497] (II) intel(0): 156AT05-307
[ 13.497] (II) intel(0): EDID (in hex):
[ 13.497] (II) intel(0): 00ffffffffffff004ca3514300000000
[ 13.497] (II) intel(0): 00120103802213780a87f594574f8c27
[ 13.497] (II) intel(0): 27505400000001010101010101010101
[ 13.497] (II) intel(0): 010101010101121b567250000c303020
[ 13.497] (II) intel(0): 250058c2100000190000000f00000000
[ 13.497] (II) intel(0): 00000000001eb4027400000000fe0053
[ 13.497] (II) intel(0): 414d53554e470a2020202020000000fe
[ 13.497] (II) intel(0): 00313536415430352d3330370a200017
[ 13.497] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 13.497] (II) intel(0): Printing DDC gathered Modelines:
[ 13.497] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 13.497] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 13.497] (II) intel(0): Printing probed modes for output LVDS1
[ 13.497] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 13.497] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.497] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 13.497] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.497] (II) intel(0): EDID for output VGA1
[ 13.521] (II) intel(0): EDID for output HDMI1
[ 13.560] (II) intel(0): EDID for output DP1
[ 13.685] (II) intel(0): EDID for output HDMI2
[ 13.685] (II) intel(0): Manufacturer: HWP Model: 2848 Serial#: 16843009
[ 13.685] (II) intel(0): Year: 2011 Week: 24
[ 13.685] (II) intel(0): EDID Version: 1.3
[ 13.685] (II) intel(0): Digital Display Input
[ 13.685] (II) intel(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 13.685] (II) intel(0): Gamma: 2.20
[ 13.685] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 13.685] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 13.685] (II) intel(0): Default color space is primary color space
[ 13.685] (II) intel(0): First detailed timing is preferred mode
[ 13.685] (II) intel(0): redX: 0.641 redY: 0.335 greenX: 0.298 greenY: 0.611
[ 13.685] (II) intel(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 13.685] (II) intel(0): Supported established timings:
[ 13.685] (II) intel(0): 720x400@70Hz
[ 13.685] (II) intel(0): 640x480@60Hz
[ 13.685] (II) intel(0): 800x600@60Hz
[ 13.685] (II) intel(0): 1024x768@60Hz
[ 13.685] (II) intel(0): Manufacturer's mask: 0
[ 13.685] (II) intel(0): Supported standard timings:
[ 13.685] (II) intel(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 13.685] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 13.685] (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 13.685] (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 13.685] (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 13.685] (II) intel(0): Supported detailed timing:
[ 13.685] (II) intel(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 13.685] (II) intel(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 13.685] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 13.685] (II) intel(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 13.685] (II) intel(0): Monitor name: LA2205
[ 13.685] (II) intel(0): Serial No: 3CQ124N20C
[ 13.685] (II) intel(0): EDID (in hex):
[ 13.685] (II) intel(0): 00ffffffffffff0022f0482801010101
[ 13.685] (II) intel(0): 18150103802f1e78ee36c5a4554c9c25
[ 13.685] (II) intel(0): 125054a10800814081809500a940b300
[ 13.685] (II) intel(0): 01010101010121399030621a274068b0
[ 13.685] (II) intel(0): 3600d9281100001c000000fd00324c18
[ 13.685] (II) intel(0): 5311000a202020202020000000fc004c
[ 13.685] (II) intel(0): 41323230350a202020202020000000ff
[ 13.685] (II) intel(0): 003343513132344e3230430a202000d3
[ 13.685] (II) intel(0): Printing probed modes for output HDMI2
[ 13.685] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 13.685] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 13.685] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 13.685] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 13.685] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 13.685] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 13.685] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 13.685] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 13.685] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 13.709] (II) intel(0): EDID for output HDMI3
[ 13.746] (II) intel(0): EDID for output DP2
[ 13.786] (II) intel(0): EDID for output DP3
[ 13.786] (II) intel(0): Output LVDS1 connected
[ 13.786] (II) intel(0): Output VGA1 disconnected
[ 13.786] (II) intel(0): Output HDMI1 disconnected
[ 13.786] (II) intel(0): Output DP1 disconnected
[ 13.786] (II) intel(0): Output HDMI2 connected
[ 13.786] (II) intel(0): Output HDMI3 disconnected
[ 13.786] (II) intel(0): Output DP2 disconnected
[ 13.786] (II) intel(0): Output DP3 disconnected
[ 13.786] (II) intel(0): Using fuzzy aspect match for initial modes
[ 13.786] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 13.786] (II) intel(0): Output HDMI2 using initial mode 1024x768
[ 13.786] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 13.786] (II) intel(0): Kernel page flipping support detected, enabling
[ 13.786] (**) intel(0): Display dimensions: (340, 190) mm
[ 13.786] (**) intel(0): DPI set to (76, 102)
[ 13.786] (II) Loading sub module "fb"
[ 13.786] (II) LoadModule: "fb"
[ 13.787] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.802] (II) Module fb: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.0.0
[ 13.802] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.802] (II) Loading sub module "dri2"
[ 13.802] (II) LoadModule: "dri2"
[ 13.802] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.802] (II) Module dri2: vendor="X.Org Foundation"
[ 13.802] compiled for 1.10.4, module version = 1.2.0
[ 13.802] ABI class: X.Org Server Extension, version 5.0
[ 13.802] (==) Depth 24 pixmap format is 32 bpp
[ 13.802] (II) intel(0): [DRI2] Setup complete
[ 13.802] (II) intel(0): [DRI2] DRI driver: i965
[ 13.802] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 13.805] (II) UXA(0): Driver registered support for the following operations:
[ 13.805] (II) solid
[ 13.805] (II) copy
[ 13.805] (II) composite (RENDER acceleration)
[ 13.805] (II) put_image
[ 13.805] (II) get_image
[ 13.805] (==) intel(0): Backing store disabled
[ 13.805] (==) intel(0): Silken mouse enabled
[ 13.805] (II) intel(0): Initializing HW Cursor
[ 14.399] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.400] (==) intel(0): DPMS enabled
[ 14.400] (==) intel(0): Intel XvMC decoder enabled
[ 14.400] (II) intel(0): Set up textured video
[ 14.400] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 14.400] (II) intel(0): direct rendering: DRI2 Enabled
[ 14.400] (==) intel(0): hotplug detection: "enabled"
[ 14.400] (--) RandR disabled
[ 14.400] (II) Initializing built-in extension Generic Event Extension
[ 14.400] (II) Initializing built-in extension SHAPE
[ 14.400] (II) Initializing built-in extension MIT-SHM
[ 14.400] (II) Initializing built-in extension XInputExtension
[ 14.400] (II) Initializing built-in extension XTEST
[ 14.400] (II) Initializing built-in extension BIG-REQUESTS
[ 14.400] (II) Initializing built-in extension SYNC
[ 14.400] (II) Initializing built-in extension XKEYBOARD
[ 14.400] (II) Initializing built-in extension XC-MISC
[ 14.400] (II) Initializing built-in extension SECURITY
[ 14.400] (II) Initializing built-in extension XINERAMA
[ 14.400] (II) Initializing built-in extension XFIXES
[ 14.400] (II) Initializing built-in extension RENDER
[ 14.400] (II) Initializing built-in extension RANDR
[ 14.400] (II) Initializing built-in extension COMPOSITE
[ 14.400] (II) Initializing built-in extension DAMAGE
[ 14.498] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 14.498] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 14.498] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 14.498] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 14.498] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 14.498] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 14.498] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 14.498] (II) intel(0): Setting screen physical size to 270 x 203
[ 14.799] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.799] (II) LoadModule: "evdev"
[ 14.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (II) Module evdev: vendor="X.Org Foundation"
[ 14.811] compiled for 1.10.0, module version = 2.6.0
[ 14.811] Module class: X.Org XInput Driver
[ 14.811] ABI class: X.Org XInput driver, version 12.2
[ 14.811] (II) Using input driver 'evdev' for 'Power Button'
[ 14.811] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.811] (**) Power Button: always reports core events
[ 14.811] (**) Power Button: Device: "/dev/input/event3"
[ 14.811] (--) Power Button: Found keys
[ 14.811] (II) Power Button: Configuring as keyboard
[ 14.811] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.811] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 14.811] (**) Option "xkb_rules" "evdev"
[ 14.811] (**) Option "xkb_model" "evdev"
[ 14.811] (**) Option "xkb_layout" "us"
[ 14.829] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 14.829] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 14.829] (II) Using input driver 'evdev' for 'Video Bus'
[ 14.829] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.829] (**) Video Bus: always reports core events
[ 14.829] (**) Video Bus: Device: "/dev/input/event4"
[ 14.829] (--) Video Bus: Found keys
[ 14.829] (II) Video Bus: Configuring as keyboard
[ 14.829] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 14.829] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 14.829] (**) Option "xkb_rules" "evdev"
[ 14.829] (**) Option "xkb_model" "evdev"
[ 14.829] (**) Option "xkb_layout" "us"
[ 14.832] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 14.832] (II) No input driver/identifier specified (ignoring)
[ 14.833] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14.833] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.833] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.833] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.833] (**) Sleep Button: always reports core events
[ 14.833] (**) Sleep Button: Device: "/dev/input/event1"
[ 14.833] (--) Sleep Button: Found keys
[ 14.833] (II) Sleep Button: Configuring as keyboard
[ 14.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 14.833] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 14.833] (**) Option "xkb_rules" "evdev"
[ 14.833] (**) Option "xkb_model" "evdev"
[ 14.833] (**) Option "xkb_layout" "us"
[ 14.835] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event5)
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.835] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[ 14.835] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.835] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 14.835] (**) CHICONY HP Basic USB Keyboard: Device: "/dev/input/event5"
[ 14.835] (--) CHICONY HP Basic USB Keyboard: Found keys
[ 14.835] (II) CHICONY HP Basic USB Keyboard: Configuring as keyboard
[ 14.835] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.1/1-1.4.3.1:1.0/input/input5/event5"
[ 14.835] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD)
[ 14.835] (**) Option "xkb_rules" "evdev"
[ 14.835] (**) Option "xkb_model" "evdev"
[ 14.835] (**) Option "xkb_layout" "us"
[ 14.836] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event6)
[ 14.836] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 14.836] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 14.836] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.836] (**) Logitech USB Optical Mouse: always reports core events
[ 14.836] (**) Logitech USB Optical Mouse: Device: "/dev/input/event6"
[ 14.836] (--) Logitech USB Optical Mouse: Found 3 mouse buttons
[ 14.836] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 14.836] (--) Logitech USB Optical Mouse: Found relative axes
[ 14.836] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 14.836] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 14.836] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 14.836] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 14.836] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.3/1-1.4.3.2/1-1.4.3.2:1.0/input/input6/event6"
[ 14.836] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 14.836] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 14.836] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 14.836] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 14.837] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.837] (II) config/udev: Adding input device HDA Intel PCH Line In at Sep Rear Jack (/dev/input/event13)
[ 14.837] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Mic at Ext Right Jack (/dev/input/event14)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH Line Out at Sep Rear Jack (/dev/input/event15)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HP Out at Ext Right Jack (/dev/input/event16)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event17)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.838] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event18)
[ 14.838] (II) No input driver/identifier specified (ignoring)
[ 14.839] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP (/dev/input/event19)
[ 14.839] (II) No input driver/identifier specified (ignoring)
[ 14.840] (II) config/udev: Adding input device HP HD Webcam [Fixed] (/dev/input/event10)
[ 14.840] (**) HP HD Webcam [Fixed]: Applying InputClass "evdev keyboard catchall"
[ 14.840] (II) Using input driver 'evdev' for 'HP HD Webcam [Fixed]'
[ 14.840] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.840] (**) HP HD Webcam [Fixed]: always reports core events
[ 14.840] (**) HP HD Webcam [Fixed]: Device: "/dev/input/event10"
[ 14.840] (--) HP HD Webcam [Fixed]: Found keys
[ 14.840] (II) HP HD Webcam [Fixed]: Configuring as keyboard
[ 14.840] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input10/event10"
[ 14.840] (II) XINPUT: Adding extended input device "HP HD Webcam [Fixed]" (type: KEYBOARD)
[ 14.840] (**) Option "xkb_rules" "evdev"
[ 14.840] (**) Option "xkb_model" "evdev"
[ 14.840] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 14.843] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.843] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.843] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.843] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 14.843] (--) AT Translated Set 2 keyboard: Found keys
[ 14.843] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.843] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 14.843] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 14.843] (**) Option "xkb_rules" "evdev"
[ 14.843] (**) Option "xkb_model" "evdev"
[ 14.843] (**) Option "xkb_layout" "us"
[ 14.843] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 14.843] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 14.843] (II) LoadModule: "synaptics"
[ 14.843] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (II) Module synaptics: vendor="X.Org Foundation"
[ 14.850] compiled for 1.10.2, module version = 1.4.1
[ 14.850] Module class: X.Org XInput Driver
[ 14.850] ABI class: X.Org XInput driver, version 12.2
[ 14.850] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 14.850] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 14.850] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.850] (**) Option "Device" "/dev/input/event11"
[ 14.970] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5690
[ 14.970] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4854
[ 14.970] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 14.970] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 14.970] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 14.970] (**) Option "TapButton1" "1"
[ 14.970] (**) Option "TapButton2" "2"
[ 14.970] (**) Option "TapButton3" "3"
[ 15.076] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.076] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15.183] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[ 15.183] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 15.183] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 15.183] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 15.183] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 15.183] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 15.183] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 15.183] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event7)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.184] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 15.184] (II) No input driver/identifier specified (ignoring)
[ 15.186] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[ 15.186] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 15.186] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 15.186] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.186] (**) HP WMI hotkeys: always reports core events
[ 15.186] (**) HP WMI hotkeys: Device: "/dev/input/event9"
[ 15.186] (--) HP WMI hotkeys: Found keys
[ 15.186] (II) HP WMI hotkeys: Configuring as keyboard
[ 15.186] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 15.186] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 15.186] (**) Option "xkb_rules" "evdev"
[ 15.186] (**) Option "xkb_model" "evdev"
[ 15.186] (**) Option "xkb_layout" "us"
[ 39.891] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 39.891] (II) intel(0): Printing DDC gathered Modelines:
[ 39.891] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.300] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.300] (II) intel(0): Printing DDC gathered Modelines:
[ 52.300] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 52.625] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 52.625] (II) intel(0): Printing DDC gathered Modelines:
[ 52.625] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 54.852] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 54.852] (II) intel(0): Printing DDC gathered Modelines:
[ 54.861] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 70.112] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 70.113] (II) intel(0): Printing DDC gathered Modelines:
[ 70.113] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 72.893] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 72.893] (II) intel(0): Printing DDC gathered Modelines:
[ 72.893] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.662] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 82.662] (II) intel(0): Printing DDC gathered Modelines:
[ 82.662] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 82.951] (II) intel(0): Allocated new frame buffer 1088x770 stride 4608, tiled
[ 83.011] (II) intel(0): Allocated new frame buffer 1728x1052 stride 7168, tiled
[ 83.497] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.497] (II) intel(0): Using hsync ranges from config file
[ 83.497] (II) intel(0): Using vrefresh ranges from config file
[ 83.497] (II) intel(0): Printing DDC gathered Modelines:
[ 83.497] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.497] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.497] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.497] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.497] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.497] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.497] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.498] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.498] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 83.787] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 83.787] (II) intel(0): Using hsync ranges from config file
[ 83.787] (II) intel(0): Using vrefresh ranges from config file
[ 83.787] (II) intel(0): Printing DDC gathered Modelines:
[ 83.787] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 83.787] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 83.787] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 83.787] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 83.787] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 83.787] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 83.787] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 83.788] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 83.788] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.094] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.094] (II) intel(0): Using hsync ranges from config file
[ 84.094] (II) intel(0): Using vrefresh ranges from config file
[ 84.094] (II) intel(0): Printing DDC gathered Modelines:
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.094] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.094] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.094] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.094] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.094] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.094] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.094] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.094] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.219] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 84.276] (EE) intel(0): failed to set mode: Invalid argument
[ 84.467] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.467] (II) intel(0): Using hsync ranges from config file
[ 84.467] (II) intel(0): Using vrefresh ranges from config file
[ 84.467] (II) intel(0): Printing DDC gathered Modelines:
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.467] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.467] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.467] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.467] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.467] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.467] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.467] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.467] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 84.807] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 84.807] (II) intel(0): Using hsync ranges from config file
[ 84.807] (II) intel(0): Using vrefresh ranges from config file
[ 84.807] (II) intel(0): Printing DDC gathered Modelines:
[ 84.807] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 84.807] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 84.807] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 84.807] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 84.807] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 84.807] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 84.807] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 84.808] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 84.808] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.104] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.104] (II) intel(0): Using hsync ranges from config file
[ 85.104] (II) intel(0): Using vrefresh ranges from config file
[ 85.104] (II) intel(0): Printing DDC gathered Modelines:
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.104] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.104] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.104] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.104] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.104] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.104] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.104] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.104] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.447] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.447] (II) intel(0): Using hsync ranges from config file
[ 85.447] (II) intel(0): Using vrefresh ranges from config file
[ 85.447] (II) intel(0): Printing DDC gathered Modelines:
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.447] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.447] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.447] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.447] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.447] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.447] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.447] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.447] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 85.791] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 85.791] (II) intel(0): Using hsync ranges from config file
[ 85.791] (II) intel(0): Using vrefresh ranges from config file
[ 85.791] (II) intel(0): Printing DDC gathered Modelines:
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 85.791] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 85.791] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 85.791] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 85.791] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 85.791] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 85.791] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 85.791] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 85.791] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 86.169] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.169] (WW) intel(0): Page flip failed: Device or resource busy
[ 86.313] (WW) intel(0): flip queue failed: Device or resource busy
[ 86.313] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.047] (II) intel(0): EDID vendor "HWP", prod id 10312
[ 100.047] (II) intel(0): Using hsync ranges from config file
[ 100.047] (II) intel(0): Using vrefresh ranges from config file
[ 100.047] (II) intel(0): Printing DDC gathered Modelines:
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 100.047] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 100.047] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 100.047] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 100.047] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 100.047] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 100.047] (II) intel(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 100.047] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 100.047] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 100.156] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.156] (II) intel(0): Printing DDC gathered Modelines:
[ 100.156] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 100.464] (WW) intel(0): flip queue failed: Device or resource busy
[ 100.464] (WW) intel(0): Page flip failed: Device or resource busy
[ 100.472] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 100.790] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 100.790] (II) intel(0): Printing DDC gathered Modelines:
[ 100.790] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.081] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.081] (II) intel(0): Printing DDC gathered Modelines:
[ 101.081] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 101.435] (II) intel(0): EDID vendor "SEC", prod id 17233
[ 101.435] (II) intel(0): Printing DDC gathered Modelines:
[ 101.435] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1414 1446 1480 768 770 775 780 -hsync -vsync (46.8 kHz)
[ 190.516] (II) AIGLX: Suspending AIGLX clients for VT switch
Since this is a multi-part problem I guess my initial task is to understand why going directly to disabling the laptop's LCD and setting my external monitor to 1680x1050 (Auto) doesn't work without going through the other steps.
Last edited by nnelson123 (2011-10-05 13:48:19)[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out. -
How do I use two external monitors with my laptop?
I have a new Pavilion dm4-301 d cl Entertainment PC. My OS is Windows 7. I am used to using two external monitors with a docking station. This new laptop does not have a docking station. What do I need to get to use two external monitors?
This question was solved.
View Solution.Certainly not without a dock but even with, HP laptop docks pretty well limit you to one of the external monitor ports, even if there are two on the dock. We have used a device called an Atlona AT-HDPIX2 which is a usb to hdmi adapter. It provides a third monitor capability for a laptop....use the native external monitor port and the internal laptop display and then this device gives a third monitor which is full configurable from the Windows 7 display interface...clone, extend, etc. It allows full HD resolution and is responsive enough for even light gaming. HP makes no true docking station for your laptop.
-
MS Flight Simulator 2004 on a Satellite A100-451 & external monitor
Hello, I have a A100-451 running Vista plus an external 19" 1280*1024 monitor. I have loaded FS 2004 OK.
Has anyone here any experience of using FS on a laptop with an external monitor ?, and what is the best way of setting up the 2 screens ?
Thanks
KKHi again :)
hm, would you like to use the second screen as a extension for your cockpit?? Usually it should be possible. A friend of mine set a full cockpit view with 3 TFTs on his desktop machine,
but I dont know how it is just with two screens.
Here is a link which could maybe give you some ideas with gaming on multiple monitors:
http://www.wideview.it/
Have phun
Greets
Maybe you are looking for
-
What is the use of account modifier in automatic account
hi can someone explain the use of account modifier in automatic account
-
USB install of windows 7 on macbookpro 3.1?
I have a MacBook Pro which I would like to install windows 7 onto a bootcamp partition. However, the internal DVD drive is bust and spits out any DVD/cd inserted. Is there any way of installing windows 7 without fixing the internal DVD drive? I've tr
-
I share my iTunes Account with my family, we all have our own computers with libraries so this has never been an issue. However when iTuens updated the new verison has ALL of our music on my libary page, and it comes up in shuffle. How do i Remove
-
How do I set up speed dial? My contacts ported over from my old phone, but the speed dial settings are gone. I find nothing in the manual or online about speed dial.
-
Adding a dynamic weblink that pulls an image into a report
I am trying to create a report that pulls an image from a Sharepoint site (http) based a field value that is also in the report. It is an image of a product that shows based on the product number/unique ID. I have the dynamic link working within a we