External mySAP SRM-Feed via XI

Hi Board,
I'm interested in the option to create shopping carts via external input file. The requirement is to interface an external webshop application which provides shopping carts to a SRM Server system. I could influence the file structure provided for input at least a little.
Are there possibilities to feed shooping cart data via XI/XML in SRM server? As I'm really new to that topic I'm open to any suggestions or ideas.
Systems used are mySAP SRM 4.0 with XI 3.0 in extended classic scenario.
May regards, Richard

I'm interested in the option to create shopping carts via external input file
>>>
I guess there should be a BAPI/IDOC involved in creation of a shopping cart. So in an XI prespective it is a
File (ext. sys) -> XI -> BAPI/IDoc(SRM) scenario.
Some extra pointers on SRM & XI. It can be an interesting read for you.
SAP has pre-delivered content for SRM, so it comes with mappings
and design time objects.
More documentation https://websmp207.sap-ag.de/ibc and search for
SRM in the Left Menu.
Some configuration guides-
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf

Similar Messages

Will Premiere Pro capture from an external feed via HDMI?

I need to capture a feed via HDMI? Can I capture external sources in Premiere Pro?

You will need to use 3rd party hardware and a software 'driver' to link P-Pro to the hardware device
I don't use that workflow, so can only suggest using Google to find the hardware

Is it possible that iMac corrupts connected external hdd-s drive via USB?

Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

What is true business proposition for SAP XI being mandatory for mySAP SRM

Hi,
Would like to know the true business/technical propostion which makes SAP XI the mandatory middleware for mySAP SRM business scenarios
1. Plan-Driven Procurement, and
2. Catalog Content Mangement
Appreciate a reason beyond single vendor/TCO dope we all know...
tnx,
renji

Hi Ranjan,
Solution Manager is not mandatory for SRM 7 implementation.
Only thing is Solution Manager contains best pratices for Project implementation e.g AS is process , to be process, blue print etc.
It is just a guilde. All things might not be required for your project.
We did it without solution Manager except that we used it for generating installation key & for maintainance opt.
Best Wishes,
Tushar.

HT5219 Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?

Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?

Which keys to I need to switch my macbook air display to an external thunderbolt display connected via mini port?
If you just bought the external Thunderbolt Display, you may be able to return it for the LED Display.

How can I import my music CD from an external drive (other PC) via LAN?

How can I import my music CD from an external drive (other PC) via LAN?
I have tried by "add..." but without success.

Hello DIRP,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/ht1347
Best of luck,
Mario

Performance issue in mysap SRM

Hi,
We are facing the performance issue in mySAP SRM system. User when logs onto mySAP SRM and confirms a purchase order it takes a very long duration. Can you please suggest as to how to analyze the performance issue. Do we have anything similar to STAD which we use for ABAP to analyze the response time.
Thanks in advance.
Regards,
Subhram

In the note: https://service.sap.com/sap/support/notes/856803
Execute this report BBP_GETLIST_INDEX_FILL and activate indexes.
Also
Check note, https://service.sap.com/sap/support/notes/721358
apply the index recommendations to BBPD_PD_INDEX_H, BBPD_PD_INDEX_I tables. Also updating DB stats on these parameters will improve the performance.
Regards
SM

Can I extend time capsule by adding external drive connected TC via USB?

Hi,
I use my TC drive for backups, i's now full. Can I extend time capsule backup drive by adding external drive connected TC via USB? If yes, how do I his? I have 1TB WD external drive connected via the TC's USB, I can see the WD drive in the finder and the TC set-up...but I don't know where to go from here...
Thanks for your help
Steveru

Welcome to the discussions, Steveru!
I think what you are asking is can you simply continue Time Machine backups by adding the new USB drive, correct? The answer is not exactly. See below for details.
To use the new USB drive for Time Machine backups, you'll need to Open System Preferences (gear icon) on the dock and open Time Machine. Click on Select Disk and click your USB drive to highlight it, then click Use for Backup. Here's the rub....Time Machine will make a new full complete backup of everything on your Mac's hard drive. There's no way to avoid this. After that, it will continue to make scheduled incremental backups just like it did before on the Time Capsule.
If you ever need to go back to your original backups on the Time Capsule, you'll need to right-click the Time Capsule icon on the dock and choose Browse Other Time Machine Disks.
When the USB drive start to fill, you may decide that you no longer need all the old backups on the Time Capsule disk since you should have a good history of backups on the USB drive at that point.
So, you could erase the Time Capsule disk and then start backing up to the Time Capsule disk again. At that time, it will also make a complete backup on the first pass and then normal incremental backups from that point forward. When the TC begins to fill again, then you could erase the older backups on the USB drive and start backups again on that drive. Then switch to the other drive in the future to keep things going indefinitely. If you go with this type of flip flop plan, you should always have a solid history of many months of backups at any given time.
Will a plan like this work? I don't answer a question on the forum unless I've done it myself. This has been working well for me for almost 3 years.
Pondini, the resident expert on Time Machine and Time Capsule affairs, may have some comments on this as well. If you haven't already seen his excellent guide, Using Time Machine with a Time Capsule or +Time Machine FAQ+, these are the best available sources of information on this subject on the Internet.
Or, if you don't want to erase any your backups, you could of course keep adding a new USB drive when the current drive is about to fill.

BRF Workflow Concept (mySAP SRM)

Hello SRM Gurus...
Wanted to know abt the new concept of BRF Workflow Concept (mySAP SRM) in srm 7.0,this has changed from the earlier versions on SRM 4.0 or 5.0 which were application wf's
Need some detailed documents on this part.how this is configured,
How this is differnet from the earlier WF conecpts
any good pointers appreciated.
Arshad

Hello Arshad,
Please find the link for Workflow guide for SRM 7.0.
https://websmp208.sap-ag.de/srm-inst
Useful thread:
Re: what is the diff bet SRM 5.0 WFL and SRM 7.0WFL?
Hope this helps.
Thanks
Ashutosh

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Sorry, but this article is about 4 years old, and was printed based on preliminary information at the time.
The bottom line here is that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
If it works for you, great.
You might want to review the Apple Support documents below, which are far more recent than the article you reference:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
http://support.apple.com/kb/HT2038
It is supported.....
This is NOT correct. Please do not post false information on the forums.

HT201250 I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please hel

I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please help

See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC
See the Second Chance to Use Setup Assistant here...
http://Pondini.org/OSX/SetupLion.html

MySAP SRM logo in shopping screen

We have managed to de SAP most screens by removing or changing the SAP logos the only one we cannot find out how to change and indeed where it is, is the mySAP SRM logo which is in the top left hand corner of the screen, does anyone have any ideas as to where it is.
TM

Hi,
Go to SE80> Internet Service> BBPGLOBAL> Images> Header-->Logo.gif.
Please try this and award the points accordingly.
BR,
Vijay Mittal

Principal functionalities which were added to the mySAP SRM 5.0

Hi everybody,
which are the principal functionalities which were added to the mySAP SRM 5.0 while comparing with mySAP SRM 2.0 ?
Thanks & Regards

Hi
Please go throuh the SAP Release Notes to get the detailed differences in Functionality ->
Ensure that you read the information contained in the Release Information Note (RIN) for the current support package.
Note 863532 - Release Restrictions mySAP SRM 2005
Note 852894 - SRM 5.0 SP-Stack 01 (10/2005): Release Information Note
Note 855306 Release note SRM Server 5.5 Support Package 01
Note 559048 - Support Package 04/Service Release 01 for SRM 2.0
http://help.sap.com/saphelp_srm50/helpdata/en/f5/b4bcdac7c40c4dba53e3695d18236c/frameset.htm
Hope this will help.
Regards
- Atul

Classic - SAME PO number ranges in SRM PO via SC as well as ECC PO via PR

Hi
for example we do have PO
existing
PO 54XXXXX number serial creates via SRM by shopping cart
PO 55XXXXX number serial created PO via ECC system
but business now wants same number ranges for Both system Purchase orders WHATERVER IT MAY BE.
54XXXXXX only for SRM created PO as well as ECC PO .
SC IN srm PO in ECC 54XXXXX
PR-PO in ECC 54XXXXX
is it possible? TO HAVE SAME NUMBER RANGE
*CUSTOMER EXPECTS LIKE BELOW.*
*FOR EX PO 540000001 CREATED FROM srm by Shopping cart
*PO 540000002 CREATED BY ECC SYSTEM.via Purchase request or direct me21n*
HOW CAN I MAKE INTERNAL AS WELL EXTERNAL VIS DOC TYPE.
THEY DO NOT WANT TO HAVE TWO SEPARATE NUMBER RANGES FOR ONE BUSINESS OBJECTS. aNY ONE ACHIEVED IN REAL TIME?
br
Muthu

Thanks much Ahmed for confirmation on this.Appreciate you Ahmed on this help.
why i have asked this question we do create some PR from APO system. but their APO Purchase request uses same number range in the ECC system.
for eg. APO creates PR -300001
ECC creates PR -300002
but i dont know how it achieved in APO -ECC scenario.
Muthu
Edited by: Muthuraman Govindasamy on Jan 16, 2010 3:01 PM

Problem to login into mySAP e-recruiting via webbrowser

Hi,
I did Google the whole web to find a solution for the following problem. I hope anyone of you can help me:
We installed mySAP e-recruiting 300 with the actual service packs in our SAP-System (SAP ERP Central Component 5.0) using the integrated webserver 6.40.
We did all of the necessary customizing.
The problem is: When I like to login as an external candidate via the url I created with the report RCF_GENERATE_URLS the browser shows me the login screen. After I entered the correct login data the screen is showed again... and so on...
It is possible for the user to login into the system via the SAPGUI. He has the role SAP_RCF_EXTERNAL_CANDIDATE.
This problem occurs also when I tried to login as a internal candidate, administrator...
The System works fine when I call the Candidate Registration (HRRCF_CAND_REG) all is working fine and a user is created in the system, which can create a application and can change his stetting. When I close the browser, the user is logged of.
I already checked all OSS. The profile parameters login/accept_sso2_ticket and login/create_sso2_ticket of the Web Application Server are both set to 1. (according the OSS 595109).
Does anyone has a solution for this problem?
Thank you very much for your help.
Philipp

Hi everyone-
It doesn't sound like an SP10 problem to me. I've used SP10 on multiple systems and it works great every time.
I've seen this issue before, but I can't remember what I did to resolve it. I would suggest starting with the basics. For example, go back into SICF and make sure all of the appropriate services are active and all of the necessary E-Recruiting services have the reference users assigned with the appropriate roles.
Next, as was already mentioned, make sure the SSO flags are set.
Lastly, feel free to provide an example URL, so that I can check my system and share the service logon details (obviously omitting your server name).
Good luck
Jon

External mySAP SRM-Feed via XI

Similar Messages

Maybe you are looking for