External Notifications problem

I have just installed the new device software version 4.6.0.180 on my 8220 after the which the external notification screen has just stopped displaying messages or messenger alerts. Before installing this upgrade I was getting notifications on new mails as well as blackberry messenger messages. I have reinstalled the software a number of times and the problem is not resolved. The red light still blinks if there is message but the external screen only displays the T Mobile logo. Any ideas on how to fix this problem will be appreciated.

I am using version 4.6.0.180 on T-mobile also but I am not experiencing the problem that you mention so it may be that you have something else going on besides the software. James
I hope that this informatiion helps you to solve the problem!
James
Please remember to resolve your thread. Put the checkmark in the green box that contained your answer! Thanks!

Similar Messages

Possibly mundane Mini-DVI to VGA into an external monitor problem

Hi,
I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
Thanks if you can help!
Jack

You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
Joy joy hallelujah.
Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
Hope that helps.
~r

External Display Problem with x301

Hi everybody,
I have a external display Problem with my x301.
Ether direct attachment or via Lenovo USB Display Port Device, the external monitor (22" Benq LCD) starts to flickr after a couple of minutes and the external display shuts off.
Any ideas on this?
Thanks a lot
Chris

i have the same problem with X200 and the X200 ultrabay Docking station.
No idea yet ...

Incorrect Link of Execute Work item in External Notification

Hello Experts,
I am working with the HCM Processes and Forms and used Standard Task TS17900101 in workflow, for Approve/Reject Forms.
Everything is working fine (form gets approved/rejected from UWL).
Now I configured, SWNCONFIG for sending the external notifications, and notifications are also being sent. But when pressing the "Execute Work Item" link from external inbox, I am getting the error:
===========================================================
"Service cannot be reached".
What has happened?
URL http://xyz.abc.com:1234/webdynpro/dispatcher/sap.com/pa~asr~formstep/ApproveFormApp call was terminated because the corresponding service is not available.
===========================================================
Since, the task seems to be bound with Java web Dynpro application ApproveFormApp by looking at SWFVISU task visualization, Do I need to do any kind of addition in Services (SICF).
Or I am missing something in SWFCONFIG.
Kindly suggest asap.
Thanks & Regards,
Jimit Vadher

Hi Rob,
Thanks for the note number.
Let me tell you one more thing is, I have created customized Web Dynpro ABAP application, bound it with the newly created custom Task (for User decision), and used inside the Workflow.
So when I am sending the Notification of this custom task to External email, Correct link is being generated and working fine for agent.
But this is not working only for the standard task (TS17900101), I mentioned in my question above.
So still any service activation is pending? As per the Note, I checked ICF service and found it inactive.
Is activation required for ICF service, as custom notifications are already going & working fine.
Please suggest.
Thanks & Regards,
Jimit.

Serious external drive problems after installing Mavericks

OK, so now I am seeing multiple external drive problems. Here is my setup: A GTech 4TB drive connected to MacBook Pro via Firewire, formatted of 2 partitions of 2TB each (called GT1 and GT2). This is then daisy chained to two WD drives of 2TB each, called WD1 and WD2.
After installing Mavericks everything worked fine (in fact I have an amazing speed increase). However, after restarting my machine this morning I have the following issues:
The GTech is now a single partition called MyBook (obviously a hangover from the WD drives. I suspect the WD drive managment software) with NO data files. Interestingly it shows the following USED 1,106,870,272 bytes (1.11 GB on disk). This suggests that one of the partitions has disapeared completely.
Whilst WD 1 launces ok, WD 2 causes the Finder to relaunch whenever selected, meaning I can't get to the files. I remember having this problem before when I upgraded to SL, and it having something to do with hidden files that needed to be deleted via the terminal. However, I have searched the web and can't find the solution again.
Given that WD 1 and 2 are my backups of GT 1 and 2, then I now have a situation where I cannot access my primary or backup files for GT 2. Very impressive - not!
Can anbody remember the hidden file solution for the finder relaunch?
Can anybody help me get back my GT1 and 2 partitions (as they have the latest work on them)?

FIrewire & Thunder bolt drives are having issues with Mavericks, avoid same until a fix is issued if you can.
many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a very long line of USB HD on Mavericks, all seem fine.
Recommend anyone DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).
I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

I reset my iPhone 4 Network settings to fix the push notification problem, but I lost my internet connection. How do I fix it?

I tried to solve the "connect to iTunes to receive push notifications"-problem by resetting my network settings, but it only caused me to lose my internet connection when using 3G. Now I can't do anything with this stupid phone. How do I fix it? I don't want to reset anything anymore, I'm sick of this new iOs update, it seriously messed up my phone and I can't do anything properly anymore. Any help?
And btw, I would also like to get the push notifications back on. Connecting to iTunes did absolutely nothing. Resetting the network settings only made my situation worse. Help please!

Hi there Julia,
Ahh The iPhone isn't "stupid" it's been called "stupid" because you are frustrated at the situation , but try
Load iTunes. Backup your phone. Make sure it is backed up !! Run restore. This will get rid of the error! And please what ever you do , do not skip the back up!
Thanks,

Beats audio android app external sound problem.

Hey guys,
Recently i downloaded the Beats Audio Android app for my Optimus 2. At first it worked fine, the external sound was good, as well as the headphone output. Very shortly after the external sound became very fuzzy and loud, with the headphone output still working perfectly. The only feature that would play sound without fuzz was speakerphone while in a call. I decided to factory default my phone thinking it would fix the problem, i was already going to do it anyway. Come to find out everything got wiped including beats audio, but the same old external sound problems persisted. I'm not sure how to fix it and it is very annoying and sometimes randomly goes off. Help is greatly appreciated, thanks.
-Tyler
Maybe it has something to do with the master volume? Although i'm not sure how to access that either..

Hello,
I see that you are having trouble with the beats audio app on your phone. I would suggest that you post your issue here as well for assistance. The link will take you to the android forum for your phone.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Aperture 3.5 + Mavericks external storage problems

Aperture 3.5 + Mavericks external storage problems
After upgrading to 3.5 and Mavericks, all my projects referencing files stored on NAS show blurry or black and not responding to edit commands. Sometimes Aperture crashes. The projects/photos were okay before upgrade. Also new projects on NAS show blurry or black or fail totally to import photos. If I move the same photos to the local drive, everything is just fine.
I am using NFS to access the NAS.
Reading through this forum I found some reports of similar behavior from people storing photos on USB external drives.
This seems to be only when referencing files located on an external drive. No problems if files are copied to the Aperture library.
Any similar experience?

Referenced files on a NAS was always an gray area. While it worked for most users most of the time it wasn;t clear that Apple supported the configuration.
The Apple documents on Aperture and non-locally attached drives can be read in a number of different ways. Of course the library definitely had to be on a local drive (and even here some users reported success with the library on a NAS) but referenced masters were never explicitly mentioned either way.
Most users had success with the originals on a NAS but even with earlier version of Aperture and the OS there were always the occasional report of problems. When push-came-to -shove if moving the referenced originals to a local drive fixed the problems there wasn;t much else that could be done.
Since the release of 3.5 and Mavericks it does appear that referenced originals on a NAS do not work at all in most cases. The best we can do here, being just users like yourself, is to suggest you contact Apple and try to get through to the Aperture team and see if you can get a definitive answer.
As for problems with referenced originals on locally connected drives, I'm not aware of any widespread problems. In the few cases I've seen it has come down to some issue with the OP's system.
Having your whole workflow and setup knocked out from under you like this is really bad, unfortunately there isn't much anyone here can do for this problem.
regards

Configuring Receive Connectors for External Notifications while still displaying Site Name

This is closely related to the issue we 'resolved' in
this blog
Our SharePoint notifications would not display the Site Name in the Display Name. i.e. If an Expense Request was approved, we wanted the display name of the email to come from "Accounting"
To resolve, we went to the receive connector and made sure only "Anonymous Users" was checked under Permission groups. The workflows and notifications immediately started displaying the site they originated in the Display Name, but...
All notification emails going to external users (outside our primary domain) ceased. We has to check 'Exchange Servers' under permission groups and then we lost the display name but gained email to external users.
Does anyone know how to get both working at the same time?
Thanks!!
Devster

Hi
Devster,
Check outgoing email settings in SharePoint Central Admin > System Settings
Let us know your results, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

ICal Notifications (problems)

I'm having a heck of an introduction into the world if notifications, and I can honestly say, I'm frustrated, so I apologize if this comes off sounding short.
I received an important notification from a business partner of mine with all of the details of the meeting enclosed in an iCal Invitation attached to an email from them. The attachment seemed fine, the icon displayed inline with the attached message. (using Mail.app). I clicked on it, and was taken to iCal.
The notification appeared in the notification box in iCal.
Clicking on the invite, iCal spat back the error: "Someone invited you to an event using an email address that isn’t on your “me” card in Address Book. Find your email address in the following list and add it to your card in Address Book."
Unfortunately there is no email address listed for me to add to my Me card. I've looked all over the web, and no one seems to have a fix.
1. Tried recreating card in Address book and re-associating it to me
2. Tried making a card with JUST the email address the invite was sent to
3. Searched the web and found a few references on how frustrating it is, no answers
4. Submitted a bug report to Apple (4/29/07)
Any help would be most appreciated.

I have this exact same problem, and I cannot figure out what to do. My "me" address card now includes 3 versions of the e-mail address receiving he invitation:
[email protected]
<[email protected]>
My Name <[email protected]>
iCal still will not recognize it, and will not accept the invitation.
What can I do?

2011 Macbook Pro External Monitor Problems

Hi all,
Looking through some of the threads, it appears that getting macbook pros to work with an external monitors is a big issue.
I've just bought a phillips 27" monitor and I'm having no luck whatsoever getting my MBP to see it. I've tried both HDMI and DVI using Apple's own mini adapters, but no matter I do, the monitor fails to detect any kind of signal and goes into sleep mode.
I occassionally get the blue screen flicker on my MBP as though it's trying to connect, but the monitor does nothing!!
I've tried most of the suggestions in other threads, which relate to earlier OSX versions, but nothing has helped.
I'm running 10.8.4 on a 2.2 GHz Intel Core i7.
If I fire up my Apple TV, I can use mirroring and the monitor displays my desktop no problem, but the picture quality is poor. So I guess the monitor works. I want to use a bigger screen as I use Logic Pro, so clarity is pretty essential when it comes to picture quality.
Any help would be most appreciated.
Best Regards
Phil

Hello Phil,
The following article provides a number of troubleshooting steps that I'd recommend looking into, especially testing with another display if possible, and resetting the MacBook Pro's parameter RAM and SMC.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

External display problems with snow leopard

I just upgraded from Leopard to Snow Leopard on my Macbook and it's created lots of problems with my LCD external display:
- The display won't work at its native resolution (1680x1050) - it will flash up an image for 1/10 of second and then go black. I can only get it to work at a lower resolution, which looks AWFUL.
- If I try to start up my Macbook with the lid closed and the display connected, the display won't work at all (it jams on the start up screen). It only works if I keep both of them running
I never had these problems when using Leopard. I've searched lots of forums and found that many people are having similar problems with external displays. Apple still haven't fixed the bug after repeated efforts from people to get if fixed.
Here are some threads (now closed) on this if you're looking for solutions:
http://discussions.apple.com/thread.jspa?threadID=2132912&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2136455&tstart=1
http://discussions.apple.com/thread.jspa?threadID=2132837&tstart=0
http://discussions.apple.com/thread.jspa?messageID=10084332
Common suggested fixes are:
- Force OS X to use LCD font smoothing (does not work for me)
- Clear the PRAM on start-up (does not work for me)
- Delete /Library/Preferences/com.apple.windowserver.plist (does not work)
- Change energy management setting to high performance (only works on graphics cards in Macbook 15" and 17").
From reading these forums it appears that this is a well-know bug. Has anyone else got any suggestions to fix this? And why hasn't Apple fixed this yet after so many people bringing it to their attention? It's clearly a bug that wasn't in Leopard.

I'M FED UP WITH APPLE! They've always been a little shady, but the last half of 2010 took the cake!
First it was the iPhone 3g "upgrade" to IOS4 which was garbage and killed my ability to use the 3g until I figured out how to crack the software, wipe the thing clear then reinstall the original software. Next up was purchasing the iphone 4 as a Christmas gift for someone running tiger on their mac, only to find out that the iphone 4 doesn't work on tiger when they tried to sync their contacts - and then having to rush out and purchase snow leopard so that they could enjoy my gift. Then I install Snow Leopard (note - I purchased the family pack) onto my own leopard-running(10.5.+) powerbook only to have the external LCD display I've been using for years suddenly stop working.
Oh, okay, to be fair, it works IF I RESIGN MYSELF TO SET it to "mirror image" (which defeats the purpose of having multiple displays) and drop the resolution down to a pathetic, unsharp, nearly distored setting that is almost painful to look at knowing that this monitor was just A COUPLE OF DAYS AGO showing me crystal clear images.
Then I exhaust myself trying to find a fix only to discover that APPLE in their infinite brilliance (AKA - their torture of loyal customers) knows of the issue - worked it out - then created an update that created the issue all over again. I'm so done! No more macs. I'm going back to the evil land of PCs. At least there, you know you're getting crap, it doesn't sneak up on you after getting you to trust it time and time again.

External Display problem

Hi all,
I've been using an LCD TV as the primary display with my macbook display closed as described in http://support.apple.com/kb/HT1308.
However, one day I messed with the display resolution, selected an input that my TV doesn't support, and this whole system I got set up got messed up. This is only a problem when my macbook is closed. If the lid is open, my LCD TV still works as a dual monitor.
I was wondering if there's a way I could set the resolution back to the default so that I could use my LCD TV as the primary display when I close my macbook.
Thanks!

If you start the MacBook in Safe mode, with the lid down, you should get a useable screen on the TV and then you can reset to the original resolution and restart normally The resolution selection made while under Safe mode should persist for the normal restart. But starting in Safe mode requires that the shift key be held down during the startup process, which means an external USB keyboard is needed since the lid needs to be down.
Another clever fellow, that only had a bluetooth keyboard available, stacked up some coins and put them on the shift key on the MacBook, hit the power button and then closed the lid on the coins so that they held the shift key down. Neat idea but I would put some kind of protective layer between the screen and the coins if I were gonna try that. Or maybe just fold up something like a matchbook cover so you have something a little more soft and springy.
Once the message appears on the TV that the Mac is starting safe, the lid can be lifted for access to the keyboard and mouse.

Extended notifications problem

Hi experts,
I am trying to configure extended notifications for around 7 to 8 different taks
pertaining to different workflows.
I could successfully do it for 1 task.
Then after successful testing I did add more filters to the same configuration
under same subscription and delivery.
I even created new schedules for the new filters. But unfortunately it is not working.
I could debug the standard program SWN_SELSEN and found that the particular WAPI call to
select the delta Work Items from SWWWIHEAD and SWWWIHIST is failing because of some
timestamp mismatch.
Can you please provide me some help regarding this ?
Thanks,
Deb

Hi Purvesh,
You can find the step by step procdure in the following blog.
How to get Work items @ your Outlook Inbox
You can find all the definitions and theories in the SAP Help link provided in the same blog.
I initially followed the above and could successfully do it for 1 task.
However, I was stuck in achieving the same for multiple task belonging to different workflows.
Here is how I did it:
1) Do the configuration in SWNCONFIG as per the blog and SAP Help
     A) Create your own delivery schdule
     B) Create your own subscription using the above delivery schedule
     C) Create your own filters
     D) Create your own selection schedule
2) Then run the report SWN_SELSEN to do the actual selection and delivery based on the schedules    you created.
The key is creating the filters. Follow the SAP Help link closely and try it. If you face any problems
the please let me know.
Please award appropriate points.
Thanks & Regards
Deb
Edited by: debabrata mohanty on Dec 10, 2008 11:26 AM

External Notifications problem

Similar Messages

Maybe you are looking for