External Number Error in MM01

Dear Gurus,
I tried creating a new material A00001212 in MM01 (Material Master Record), Select material type HAWA, press enter.
System keeps displaying or the systems changes A00001212 in to material 99990 and error shows  " Number 99990 not defined for material type HAWA".
I already have assigned HAWA in MMNR - Groups - With External Number. Still the same problem.
from where this 99990 coming from?
Anyone care to share their experiences on this. Thank you.
Regards,
Ber

Hi,
The issue you are getting material type HAWA not assigned to proper Number Range Group text.
Now find out " Number range group text" for external numbering  for example:A00001212. In t.code:MMNR,double click HAWA material type and select check box of your "Number Range Group text"  and click Element/Group in the Application Bar ( view your HAWA material type  is assigned to Number Range Group text) and Save.
You can now create  new material A00001212 in MM01 (Material Master Record) by selecting material type HAWA.
For more, refer
Number range for material type
No external number assignment possible for mat. type Semifinished Product
Regards,
Biju K

Similar Messages

  • CUCM 8.6 Call Forwarding to External Number Issue

    Hello,
    Call forwarding worked without problems, we could forward our phones to external numbers and everything was ok, when somebody called to my phone, I could  got the call to my cell phone.
    But now when I forward my phone to external number and try to call to my phone I get busy trigger.
    We didn't change configuration or install any update.
    I think its my ISP-s problem, to whom we have SIP Trunk.
    I don't understand log file, so can you tell what is the problem?
    Here is log:
    057729XXXX is called party, cell phone number
    original calling party number is 240XXXXX, but it is forwarded to 2484XXX
    INVITE sip:2484XXX@ISP-IP:5060 SIP/2.0
    Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
    From: <sip:057729XXXX@MY-CUCM>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP-IP>
    Date: Wed, 18 Dec 2013 13:34:18 GMT
    Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Supported: X-cisco-srtp-fallback
    Supported: Geolocation
    Cisco-Guid: 0383266432-0000065536-0000191815-2219117834
    Session-Expires:  1800
    P-Asserted-Identity: <sip:057729XXXX@MY-CUCM-IP>
    Remote-Party-ID: <sip:057729XXXX@MY-CUCM-IP>;party=calling;screen=yes;privacy=off
    Contact: <sip:057729XXXX@MY-CUCM-IP:5060>
    Max-Forwards: 68
    Content-Type: application/sdp
    Content-Length: 215
    v=0
    o=CiscoSystemsCCM-SIP 4052091 1 IN IP4 MY-CUCM-IP
    s=SIP Call
    c=IN IP4 MY-CUCM-IP
    t=0 0
    m=audio 29790 RTP/AVP 8 101
    a=rtpmap:8 PCMA/8000
    a=ptime:20
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    |2,100,56,1.173711429^MY-CUCM-IP^MTP_3
    17:34:18.526 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 2|2,100,56,1.173711429^MY-CUCM-IP^MTP_3
    17:34:18.526 |EnvProcessUdpHandler::fireSignal - SEND: index = 2, handler = 0xb2d59c98|*^*^*
    17:34:18.526 |EnvProcessUdpPort::fireSignal - SEND, destination = ISP-IP:5060|*^*^*
    17:34:18.526 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 1172, ISP-IP:5060)|*^*^*
    17:34:18.536 |EnvProcessUdpHandler::handle_input - handle = 334|*^*^*
    17:34:18.536 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 2|*^*^*
    17:34:18.536 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 358 from ISP-IP:[5060]:
    [12623361,NET]
    SIP/2.0 100 Trying
    Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
    CSeq: 101 INVITE
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
    Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
    Server: CISCO-SBC/2.x
    Content-Length: 0
    |2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/Info/0x0/ccsip_spi_get_msg_type returned: 2 for event 1|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/Transport/0x0/context=(nil)|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/Transport/0x0/gConnTab=0xf484290, addr=ISP-IP, port=5060, connid=2, transport=UDP|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/Info/0x0/Return existing connection for port 5060 connId 2|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/Info/0x0/Checking Invite Dialog|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/Info/0xb1b50c90/INVITE response with no RSEQ - disable IS_REL1XX|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_TRYING value=500 retries=3|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/Stack/States/0xb1b50c90/0xb1b50c90 : State change from (STATE_SENT_INVITE, SUBSTATE_NONE)  to (STATE_RECD_PROCEEDING, SUBSTATE_PROCEEDING_PROCEEDING)|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_stop_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|2,100,230,1.4901096^ISP-IP^*
    17:34:18.536 |//SIP/SIPHandler/ccbId=0/scbId=0/sip_start_timer: type=SIP_TIMER_EXPIRES value=180000 retries=0|2,100,230,1.4901096^ISP-IP^*
    17:34:18.561 |EnvProcessUdpHandler::handle_input - handle = 334|*^*^*
    17:34:18.561 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 2|*^*^*
    17:34:18.561 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 396 from ISP-IP:[5060]:
    [12623362,NET]
    SIP/2.0 403 Forbidden
    Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
    CSeq: 101 INVITE
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
    Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
    Server: CISCO-SBC/2.x
    Content-Length: 0
    Contact: <sip:ISP-IP:5060>
    [12623363,NET]
    ACK sip:2484XXX@ISP-IP:5060 SIP/2.0
    Via: SIP/2.0/UDP MY-CUCM-IP:5060;branch=z9hG4bK1003a84126249
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052091~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP-IP>;tag=sip+1+b3a00013+867def6a
    Date: Wed, 18 Dec 2013 13:34:18 GMT
    Call-ID: 16d82e80-2b11a45a-c43e7-84450d0a@MY-CUCM-IP
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: presence
    Content-Length: 0
    INVITE sip:2484XXX@ISP's-Other-IP:5062 SIP/2.0
    Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP's-Other-IP>
    Date: Wed, 18 Dec 2013 13:34:18 GMT
    Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence
    Supported: X-cisco-srtp-fallback
    Supported: Geolocation
    Cisco-Guid: 0383266432-0000065536-0000191816-2219117834
    Session-Expires:  1800
    P-Asserted-Identity: <sip:057729XXXX@MY-CUCM-IP>
    Remote-Party-ID: <sip:057729XXXX@MY-CUCM-IP>;party=calling;screen=yes;privacy=off
    Contact: <sip:057729XXXX@MY-CUCM-IP:5062>
    Max-Forwards: 68
    Content-Type: application/sdp
    Content-Length: 215
    v=0
    o=CiscoSystemsCCM-SIP 4052092 1 IN IP4 MY-CUCM-IP
    s=SIP Call
    c=IN IP4 MY-CUCM-IP
    t=0 0
    m=audio 29792 RTP/AVP 8 101
    a=rtpmap:8 PCMA/8000
    a=ptime:20
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    |2,100,56,1.173711431^MY-CUCM-IP^MTP_3
    17:34:18.567 |EnvProcessUdpPort - EnvProcessUdpHandler::fireSignal() varId = 0|2,100,56,1.173711431^MY-CUCM-IP^MTP_3
    17:34:18.567 |EnvProcessUdpHandler::fireSignal - SEND: index = 0, handler = 0xa6b4d7c0|*^*^*
    17:34:18.567 |EnvProcessUdpPort::fireSignal - SEND, destination = ISP's-Other-IP:5062|*^*^*
    17:34:18.567 |EnvProcessUdpPort - EnvProcessUdpHandler::send(buff, 1177, ISP's-Other-IP:5062)|*^*^*
    17:34:18.569 |EnvProcessUdpHandler::handle_input - handle = 335|*^*^*
    17:34:18.569 |EnvProcessUdpHandler::handle_input   Status: 0, Id: 0|*^*^*
    17:34:18.569 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 394 from ISP's-Other-IP:[5062]:
    [12623365,NET]
    SIP/2.0 100 trying -- your call is important to us
    Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900;rport=5062
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP's-Other-IP>
    Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
    CSeq: 101 INVITE
    Server: kamailio (3.3.1 (x86_64/linux))
    Content-Length: 0
    17:34:18.587 |//SIP/SIPUdp/wait_UdpDataInd: Incoming SIP UDP message size 375 from ISP's-Other-IP:[5062]:
    [12623366,NET]
    SIP/2.0 403 Forbidden
    Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900;rport=5062
    Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP's-Other-IP>;tag=dc6a4ae7
    CSeq: 101 INVITE
    Reason: Q.850;cause=0;text="unknown"
    Content-Length: 0
    |2,100,230,1.4901099^ISP's-Other-IP^*
    [12623367,NET]
    ACK sip:2484XXX@ISP's-Other-IP:5062 SIP/2.0
    Via: SIP/2.0/UDP MY-CUCM-IP:5062;branch=z9hG4bK1003a95b8f3900
    From: <sip:057729XXXX@MY-CUCM-IP>;tag=4052092~294be736-ce3b-450f-a7f1-c801f3cc9a7e-27746002
    To: <sip:2484XXX@ISP's-Other-IP>;tag=dc6a4ae7
    Date: Wed, 18 Dec 2013 13:34:18 GMT
    Call-ID: 16d82e80-2b11a45a-c43e8-84450d0a@MY-CUCM-IP
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: presence
    Content-Length: 0

    SIP/2.0 403 Forbidden error
    If your router is sending a SIP/2.0 403 Forbidden error to the SIP server you are registered to, there is a good chance your  router is blocking the incoming call due to the toll-faud prevention  feature that was added to IOS version 15.1(2)T.
    How to Identify if TOLLFRAUD_APP is Blocking Your Call
    If the TOLLFRAUD_APP is rejecting the call, it generates a Q.850       disconnect cause value of 21, which represents ‘Call Rejected’. The       debug voip ccapi inout command can be run to       identify the cause value.
    Additionally, voice iec syslog can be       enabled to further verify if the call failure is a result of the toll-fraud       prevention. This configuration, which is often handy to troubleshoot the origin       of failure from a gateway perspective, will print out that the call is being       rejected due to toll call fraud. The CCAPI and Voice IEC output is demonstrated       in this debug output:
    %VOICE_IEC-3-GW: Application Framework Core: Internal Error (Toll fraud call rejected):
    IEC=1.1.228.3.31.0 on callID 3 GUID=F146D6B0539C11DF800CA596C4C2D7EF
    000183: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/ccCallSetContext:
       Context=0x49EC9978
    000184: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/cc_process_call_setup_ind:
       >>>>CCAPI handed cid 3 with tag 1002 to app "_ManagedAppProcess_TOLLFRAUD_APP"
    000185: *Apr 30 14:38:57.251: //3/F146D6B0800C/CCAPI/ccCallDisconnect:
       Cause Value=21, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
    The Q.850 disconnect value that is returned for blocked calls can also       be changed from the default of 21 with this command:
    voice service voip
    ip address trusted call-block cause
    How to Return to Pre-15.1(2)T Behavior
    Source IP Address Trust List
    There are three ways to return to the previous behavior of voice       gateways before this trusted address toll-fraud prevention feature was       implemented. All of these configurations require that you are already running       15.1(2)T in order for you to make the configuration change.
    Explicitly enable those source IP addresses from which you would like           to add to the trusted list for legitimate VoIP calls. Up to 100 entries can be           defined. This below configuration accepts calls from those host           203.0.113.100/32, as well as from the network 192.0.2.0/24. Call setups from           all other hosts are rejected. This is the recommended method from a voice           security perspective.
    voice service voip
    ip address trusted list
      ipv4 203.0.113.100 255.255.255.255
      ipv4 192.0.2.0 255.255.255.0
    Configure the router to accept incoming call setups from all source           IP addresses.
    voice service voip
    ip address trusted list
      ipv4 0.0.0.0 0.0.0.0
    Disable the toll-fraud prevention application completely.
    voice service voip
    no ip address trusted authenticate
    Two-Stage Dialing
    If two-stage dialing is required, the following can be configured to       return behavior to match previous releases.
    For inbound ISDN calls:
    voice service pots
    no direct-inward-dial isdn
    For inbound FXO calls:
    voice-port
    secondary dialtone

  • Error when loggong on for external ID "": Error during SAML 2.0 logon

    Hi,
    I'm getting be below error when trying to use SAML SSO for a ABAP Webdynpro page on a NW 7.4 system. When I access the page, it redirects to the identity provider, comes back to the page and it shows the logon page. I'm looking for any ideas of things I could look at.
    N  SAML20 SP (client 400): Incoming Response
    N  SAML20 Binding:          POST
    N  SAML20 IdP Name:         http://xxxxxx/adfs/services/trust
    N  SAML20 Status Code:      urn:oasis:names:tc:SAML:2.0:status:Responder
    N  SAML20 SP (client 400): Default ACS endpoint: https://xxxxxx/sap/saml2/sp/acs/400 , old default ACS endpoint
    N  SAML-Trace: CALL 'SAML login': SY-SUBRC = 222 , PWDCHG = 0
    N  *** ERROR => SAML-Trace: Path = /sap/bc/webdynpro/sap/oauth2_authority [sign.c       16519]
    N  {root-id=005056AD26DF1ED4B69880FF4BE51F68}_{conn-id=005056AD26DF1ED4B69880FF4BE53F68}_1
    N  *** ERROR => SAML-Trace: Returncode = 222 [sign.c       16519]
    N  *** ERROR => SAML-Trace: Message class = SAML number = 011 [sign.c       16519]
    N  *** ERROR => SAML-Trace: Message = Error when logging on for external ID "": Error during SAML 2.0 logon [sign.c       16519]
    I have updated the service to use alternate logon procedure and added the handler CL_HTTP_EXT_SAML20
    I have added the identity provider through transaction SAML2, but it does not seem to be working.
    Here is a decrypted SAML assertion:
    <samlp:Response ID="_9c844d84-8117-4851-8270-aeb12e935daf"
      Version="2.0"
      IssueInstant="2015-04-02T00:21:06.477Z"
      Destination="https://xxxxxxxxx/sap/saml2/sp/acs/400"
      Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified"
      InResponseTo="S005056ad-26df-1ed4-b699-c4c630853f68"
      xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"
      >
      <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://xxxxxxxx.com/adfs/services/trust</Issuer>
      <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
      <ds:SignedInfo>
      <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      <ds:SignatureMethod Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256" />
      <ds:Reference URI="#_9c844d84-8117-4851-8270-aeb12e935daf">
      <ds:Transforms>
      <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature" />
      <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
      </ds:Transforms>
      <ds:DigestMethod Algorithm="http://www.w3.org/2001/04/xmlenc#sha256" />
      <ds:DigestValue>08HK08VLpJC23JoQs+p+oHbDBvjRF+9NwBeowmlFTrY=</ds:DigestValue>
      </ds:Reference>
      </ds:SignedInfo>
      <ds:SignatureValue>xxxxxxx</ds:SignatureValue>
      <KeyInfo xmlns="http://www.w3.org/2000/09/xmldsig#">
      <ds:X509Data>
      <ds:X509Certificate>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</ds:X509Certificate>
      </ds:X509Data>
      </KeyInfo>
      </ds:Signature>
      <samlp:Status>
      <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Responder">
      <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:NoPassive" />
      </samlp:StatusCode>
      </samlp:Status>
    </samlp:Response>

    Hi Brian,
    I am not sure but you could check below thread and couple of sap note.
    Single Sign On - Sharepoint 2010 to SAP using ADFS
    1799402 - Automatic account creation for SAML 2.0 SP
    1257108 - Collective Note: Analyzing issues with Single Sign On (SSO)
    It may help you to resolve / identify the cause of the issue.
    BR
    AKJ

  • SD - Billing - External Number Range

    Hi,
    I have two questions related to SD billing document numbering:-
    1. I am getting error message of [Please specify an internal number range Message no. NR752] while saving a billing document based on the delivery. I have checked only external number range box in VN01. Do I need to use any user-exit for this? If yes then there are 2 user exits available -
    a) USEREXIT_NUMBER_RANGE_INV_DATE USING US_RANGE_INTERN in program RV60AFZC
                              b) FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN in program RV60AFZZ
    but both the cases the variable is US_RANGE_INTERN which is not allowing external number range ID to pass. How this external no range works.?
    2. I have a business requirement for our Mexican company code on external alphanumeric number. There would be 3 billing types say, ZF2, YF2 and ZYF2. Mexican government provides Invoice numbers in advance.
    ZF2 Number range would be A001 to A999
    YF2 Number range would be B001 to B999
    ZYF2 Number range would be C001 to C999.
    All these Invoices would be created at same time. i.e. parallel processing. Also all these invoices would be transmitted thru EDI -IDOC. And accounting document should have same number as billing document will carry i.e. external govt provided numbers.
    How do I map this in systems. My experience says alphanumeric number range is not supported by SAP. Anybody may share his solution on this would be simply great.
    Thanks
    Subrata Das

    FORM USEREXIT_NUMBER_RANGE                                    *
          This userexit can be used to determine the numberranges for   *
          the internal document number.                                 *
          US_RANGE_INTERN - internal number range                       *
          This form is called from form LV60AU02                        *
    FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
    Example: Number range from TVFK like in standard
    US_RANGE_INTERN = TVFK-NUMKI.
    *{   INSERT         DEVK905392                                        1
    There was a need to check whether all the mandatory pricing
    conditions have been filled before creation of an invoice so that
    the invoice is released to accounting as and when it is created.
    Piece of code written below ensures the same. Field uvprs = 'X'
    in item table indicates that the item is incomplete with respect to
    pricing.
      LOOP AT xvbrp WHERE uvprs = 'X'.
        EXIT.
      ENDLOOP.
      IF sy-subrc EQ 0.
        MESSAGE e073(vf) WITH xvbrp-posnr.
      ENDIF.
    TABLES : zbd_nr_code.
    data : aa like zbd_nr_code-nr_code.
      IF sy-tcode = 'VF01'.
       SELECT SINGLE *
         FROM tvko
        WHERE vkorg = vbak-vkorg.
       IF sy-subrc EQ 0.
          SELECT SINGLE NR_CODE INTO ZBD_NR_CODE-NR_CODE
            FROM zbd_nr_code
           WHERE vkorg    = vbrk-vkorg
             AND werks    = vbrp-werks
             AND fkart    = vbrk-fkart.
          IF sy-subrc = 0 .
            us_range_intern = zbd_nr_code-nr_code.
          ENDIF.
       ENDIF.
      ENDIF.
    I feel this will help out.
    Regards

  • Find the Column Name which gives Invalid Number Error

    Hi,
    There are about 150 columns in a table and data to this table is from a external source like flat file. when these data are loaded to the table for a particular column it gives Invalid Number Error. So need to find for Which Numeric Column a String Value is about to be inserted.
    since we are sure not whether the proper Values are coming from Source in Front End we pass the Value within ' quotes.
    So how do we get the Column for which the error is raised :-)

    If you are using SQL*Loader, the log will tell you which row and column has the error.
    Otherwise you may need to code your own debugging statements.

  • Invalid Number Error for Decimal Field While Loading Data

    I am loading a delimited text file using the SQL* loader however I am reciving an error in my decimal fields. When a decimal field only has leading zeros before the decimal point I receive invalid number error. Below will clarify:
    i.e.) 00000000.30 [*Invalid number*]
    i.e.) 00046567.45 [*Valid number*]
    i.e.) 00000001.00 [*Valid number*]
    I've tried setting the precision/scale in the table, tried declaring it a decimal field instead of number, none of these methods fixed the issue. Any help I would really appreciate.
      POLICY_NUMBER             NUMBER,
      EFFECTIVE_DATE     DATE "YYYYMMDD"          NULLIF EFFECTIVE_DATE = '',
      TRANSACTION_DATE     DATE "YYYYMMDD",
      TRANSACTION_AMOUNT     DECIMAL EXTERNAL,   -- Tried TRANSACTION_AMOUNT DECIMAL EXTERNAL (10)  & TRANSACTION_AMOUNT NUMBER
      MF_TRX_CODE          NUMBER,
      USER_ID          CHAR,
      GROUP_NUMBER          NUMBER,
      EXPIRATION_DATE     DATE "YYYYMMDD"          NULLIF EXPIRATION_DATE = '',
      BILL_NUMBER          NUMBER,Any help is greatly appreciated. Thanks before hand.

    Hi,
    Connected to Oracle Database 10g Express Edition Release 10.2.0.1.0
    Connected as hr
    SQL> SELECT * FROM TEST;
    TRANSACTION_AMOUNT
    SQL> SELECT * FROM TEST;
    TRANSACTION_AMOUNT
              11000,00
                293,37
               2000,00
               1134,32
                  0,30
    SQL>Between the selects I loaded the table with sql*loader using...
    Load Data
    INFILE *
    APPEND
    INTO TABLE TEST
    FIELDS TERMINATED BY '|'
    TRAILING NULLCOLS
      TRANSACTION_AMOUNT     DECIMAL EXTERNAL
    BEGINDATA
    00011000.00
    00000293.37
    00002000.00
    00001134.32
    00000000.30The log is
    SQL*Loader: Release 10.2.0.1.0 - Production on Tue Dec 23 17:23:47 2008
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Control File:   test.ctl
    Data File:      test.ctl
      Bad File:     test.bad
      Discard File:  none specified
    (Allow all discards)
    Number to load: ALL
    Number to skip: 0
    Errors allowed: 50
    Bind array:     64 rows, maximum of 256000 bytes
    Continuation:    none specified
    Path used:      Conventional
    Table TEST, loaded from every logical record.
    Insert option in effect for this table: APPEND
    TRAILING NULLCOLS option in effect
       Column Name                  Position   Len  Term Encl Datatype
    TRANSACTION_AMOUNT                  FIRST     *   |       CHARACTER           
    Table TEST:
      5 Rows successfully loaded.
      0 Rows not loaded due to data errors.
      0 Rows not loaded because all WHEN clauses were failed.
      0 Rows not loaded because all fields were null.
    Space allocated for bind array:                  16512 bytes(64 rows)
    Read   buffer bytes: 1048576
    Total logical records skipped:          0
    Total logical records read:             5
    Total logical records rejected:         0
    Total logical records discarded:        0
    Run began on Tue Dec 23 17:23:47 2008
    Run ended on Tue Dec 23 17:23:50 2008
    Elapsed time was:     00:00:02.86
    CPU time was:         00:00:00.06Regards,

  • Invalid number error , number column as last field in my csv

    LOAD DATA
    INFILE 'test.csv' "str '#'"
    APPEND
    INTO TABLE esgapp.c_test
    FIELDS TERMINATED BY "," Optionally enclosed by '"'
    TRAILING NULLCOLS
    rstring,
    rtext char(12000) ENCLOSED BY '<start>' and '<end>',
    ruser,
    rid SEQUENCE(MAX,1)
    This control file is working good . But what i have done is i have altered my table *ruser* column which was earlier varchar now it is number . the data in the ruser is number , now i am getting an error while executing the the script
    it is throwing an invalid number error .
    i have tried this changes before i post this post in the control file but all are throwing the invalid number error
    ruser char "to_number(rtrim(ltrim(:ruser)))"
    and
    ruser decimal external
    csv file
    hello,<start>bla...bla...bla...bla,-996203
    error
    invalid number
    Edited by: user7955917 on Mar 5, 2012 9:34 AM
    Edited by: user7955917 on Mar 5, 2012 9:41 AM
    Edited by: user7955917 on Mar 5, 2012 9:42 AM

    But....If your Oracle version is 10g+, you can define the file as external table and use the "RECORDS DELIMITED BY '#'" parameter.
    :p

  • Measuring point External Number range

    Dear Masters,
    I am trying to create the external number range for one of my measuring point type. Is it not possible to do so? If no why? If yes how?
    Thanks to all in advance.

    Hello Vaibhav,
    I have already followed the steps given by you only I cannot find the assignment of measuring point category to the number range. I have also done the number range assignment for equipment and functional location but there it exists here it does not.
    It is also showing me the error of external number while creating the new measuring point. Please do guide about the assignment to the number range.
    Thanks again.

  • CIN:External number to ARE1 Form

    HI Experts
    We have maintained external number range for ARE1 document for object J_1IARE1 but during creation of ARE1 or change mode where should i enter external ARE1 Form number (Official Number).
    In change mode the form number field is visible in nonmodifiable mode.
    During posting i am getting error related to Form number.

    Hai Mangesh bhosale     ,
    The thread may give some more details regarding the Number ranges in ARE1 document
    ARE1 number range object
    Still further query please post
    Regards,
    Mani

  • Sd invoices posting with External number range

    Hi,
    i am a fico consultant and dont know the proceedure that how to post SD invoice thorugh Sales orders with external number  range?
    while posting it is giving error like use internal number range.how to over come this.help me
    Thanks
    Prathima

    Good Afternoon Prathima.
    Use tcode OBA7
    Look for Doc type RV Billing Doc trn.
    This doc is generally used for posting Billing doc to accounting.
    Here you would find Number range as external.
    Reason: As per standard, the Accounting doc number is similar to your the Billing account.So, that there would not be any difference in numbers of both, therefore for accounting doc - Billing doc trnsfer (RV) the number range is Internal number but the Billing doc type will havre internal number range.
    And as you are FI consultant, I don't feel I need to explain why or purpose these numbers should be similar from accounting point of view.
    Hope it solved your query. Kindly reward.
    Take care. JP.

  • External number ranges in LSMW

    Hi all,
    can anyone explain me that how to use external number ranges in LSMW.
    I have to upload data using MM01 in LSMW.
    one material number should be extended to 8plants.but the field values for some fields are varying.the material number should be same for 8plants
    For this issue, which method i should follow.

    exteernal ranges means you are going to extend this material in all 8 plant.
    material number remains same.
    that means just you have to pass material number by yourself in upload.
    upload file
    material        plant     qty ................
    1                  plant1
    1                  plant2
    1                  plant 3
    1                 plant 8.
    with this  material 1 is extended in 8 plants.
    reward if useful.
    Amit Singla

  • Some external number range are not valid for equipment creation

    Hi All,
    What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
    Waiting for your valuable inputs..
    Thanks
    Surya

    Hi
    As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
    Regards,
    Rakesh

  • Packing instructions - problem with external number range

    Hi Gurus:
    I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
    The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
    I appreciate your valuable input
    Tamas

    For further records:
    we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

  • External Number Range setting for Equipment Not working

    As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
    but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
    Equipment category does not allow alphanumeric equipment number
    Can some one help whether anyother settings are needed.
    (It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
    Regards
    Jogeswara Rao

    Hi Jogeswara Rao,
    Check you other post for reply
    Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

  • External number range for TDS certificate

    Dear SAP gurus,
    My client is downloading tds certificates from NSDL. Due to this, i would like to configure external number range of tds certificates in SAP. Is it possible?
    i tried to check the external number range box in the number ranges. It is giving error. It is accepting only internal number range.
    Please help.

    Hi,
    System will not consider two Number Range Assignment, simultaneously.
    Here are few links:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9b191455711d182b40000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/53/c9864aca3711d2b494006094b9114a/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/ea/cffb3aebc63b61e10000000a11402f/frameset.htm
    Best Regards,
    Amit

Maybe you are looking for