External number range for storage units

I have been trying to set this up without success.
1. If I set up an external number range and assign it, then the system tells me to set up an internal number range.
2. If I set up an internal number range the system does not allow manual input (external assignment from internal number range not allowed).
I have allowed internal and external assignment for the warehouse.
This is the error that I get when trying scenario 2.
"External assignment of numbers from an internal number range not allowed
Message no. L3212
Diagnosis
The external storage unit number to be issued is in an internal number range.
Procedure
Unlike other applications, external number ranges in the WM system are not explicitly defined.  Instead, they are taken from the unused numbers in the internal number ranges when the "Issue type" switch in the Customizing application allows external numbers to be issued for the warehouse number."
So does this saying that external number assignment is not possible? Or is it saying that I have to use internal range even for external numbering? What is the solution?

Please have a look at OSS note no. 14881.
Best regards,
Christiane Schnellenbach

Similar Messages

  • External Number Range for Handling Unit in COWBPACK Transaction

    Dear All,
    I need to activate external number range for handling units in COWBPACK transaction.
    i have tested but its not possible in standard SAP.
    i want to know any USEREXIT or BADI or BAPI for the same, so that we can use external number range for HU in COWBPACK.
    with regards
    Azeez.Mohd

    Hi,
         Thry this BADI
    BADI_HU_MAIN
    BADI_HU_SAVE
    Regards
    GK.

  • Extrernal Number Ranges for Handling Units in COWBPACK

    Dear Friends,
    I need to activate external number range for handling units in COWBPACK transaction.
    When I run COWBPACK, I don't get any field to enter Handling Unit Number.
    Can anybody suggest the way out.
    Regards,
    Harsh

    OK

  • Any FM for create an external number range for equipment number ????

    Hi all,
    Any FM for create an external number range for equipment number??????
    thanks & regards
    indu.

    Hi
    you can use below FM to get number range
       CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = 'Z1'
         object                        = 'ZTEST'
         object                        = 'ZFIREC'
         quantity                      = '1'
         subobject                     = p_compcd
         toyear                        = p_fisc
       IMPORTING
         number                        = v_seqno.
    thanks & regards,
    bhupal.

  • External Number Range for Invoice

    Hi All,
    If we  use USEREXIT_NUMBER_RANGE - RV60AFZZ to specify  external number then can we enter alpha-numeric or only numeric value.
    regards
    Debasish

    Debasish,
    Few things a wish to suggest you,
    1. SAP always says try to avoid External number ranges for invoices, as it has legal as well as technical compliances.
    2. By using user exit, even though you will enter the external numbers but in case of several and multi user systems there may be chances of inconsistencies.
    Anyway if you have decided to do this then Yes its possible you can use Alphanumeric numbers also
    Thanks,
    Raja

  • External Number Range for Billing Documents

    Hi Friends,
    Can any pls tell me how to create external number ranges for billing documents. We are trying to Map the Invoice nos from POS system to create and match the billing nos in both the systems. Pls help on how can I do this.
    Thanks
    Raj

    Check this thread
    [Re: Customize Billing Number Format|Re: Customize Billing Number Format]
    thanks
    G. Lakshmipathi

  • External number range for service items?

    I want to create Purchase order with services using BAPI. Is it possible to set external number range for the extrow / introw, so that if I need to change a service line item, I will be able to find out which service item needs to be changed.

    It depends on whether you have a service master or not.
    1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
    2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
    Makes sense?
    A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
    Regards,
    Ravi
    Message was edited by: Ravikumar Allampallam

  • External number range for billing document (Invoices)

    Hi guys,
    I have a requirement from one of client to implement external number range for billing documents.
    I can only see a provision for internal number range in customising for Billing document type.
    Please can you assist me with detailson how to set up external number range for billing documents (Invoices).
    Thanks, Felix

    Hi Felix
    I think the similar requirement is in Venezuela also.
    So pl. check the SAP Note 849438 . As per the note :-
    The solution is delivered in the indicated support packages. In case you can not implement the correspondin support package for your release immediately, please follow the procedure described below:
    1. In the Data Dictionary Editor (transaction SE11) please open the definition of domain J_1AOFFNREL, go to the fixed values and add value 'P' with description 'Number Assingment using Prenumbered Forms' in a position so that the possible values remain sorted alphabetically.
    2. In the Message Editor (transaction SE91) please go to message class ICC_CN and add the new message 837 with text '&1: Official doc. numbering is not available for delivery documents!'.
    3. If you are implementing the note in release 4.6C, please create the following function modules:
    o     OFF_NUMBER_LOCAL_ASSIGN_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_ASSIGN_TW
    o     OFF_NUMBER_LOCAL_NUMBERING_VE in function group FIN2, and then copy the interface (all parameters and exceptions) of the function module OFF_NUMBER_LOCAL_NUMBERING_TW
    o     XBLNR_BUILD_AND_SPLIT_VE in function group IDSDCNUTIL, and then copy the interface (all parameters and exceptions) of the function module XBLNR_BUILD_AND_SPLIT_PECL
    4. Implement the source code corrections as shown below.
    The following customizing actions should be also executed when the solution by delivered by the corresponding support package. If you applied the solution manually, then please use the IMG activities listed in the section Cross-Application Components -> General Application Functions -> Cross-Application Document Numbering -> Taiwan as a reference. After the installation of the corresponding support package the customizing node for Venezuela can be used.
    1. Enable the use of business place for country Venezuela as described in the OSS Note 726537.
    2. Define the necessary document classes and configure the document types you would like to get an official document number as relevant for official document numbering in the desired mode. Please check the OSS Note 571376 for some explanations about the meaning of the different settings.
    3. Define the necessary number ranges and intervals and assign them to the combination of company code, business place, document class and validity period. If you use the customizing activity for Taiwan, then please leave the prefix field empty.
    Regards
    Amitesh

  • EXTERNAL NUMBER RANGE FOR INVOICES

    Dear Gurus,
    Plz tell me how do we put external number range for billing documents.
    this option is not there in VOFA.

    Hi Anil,
    Hi,
    Number Ranges are maintained in T.Code: SM30.
    Provide the Table/ View, say Bill_Num for example.
    In Tab: Restrict data Range, Click Radio button: No restrictions and Click Tab: Maintain.
    In new window, maintain all the combinations for Columns: Sales Org, dist. Channel & Bill type and no values in IntNR.
    Save the data.
    I hope this will work.
    Regards,
    Amit

  • External number range for GR document

    Hello,
    1.  Is it technically possible to create external number range for GR document (material document) - Note, PO is also having ext number range
    2.  Is it adviseable to create ext num range for material docs?
    Thanks
    Regards

    hi,
    1. it is possible to create external number ranges for GR document.
    in spro config settings:  use transaction OMBT and in that enter a number range and check that external number range check box.
    2. it is not advisable to have external number range for material docs --> because for every movement of the material end user has to giva an entry for material document.
    hope this may help you,
    regards,
    srinivas

  • External number range for material master

    Dear sap guru i want to create external number range for msterial master but i am facing problem .i used T.code MMNR but i am not able to tick external number small squar window . can anybody help me and tell me step by step
    regards
    rohit

    Hi
    In tcde MMNR select groups in the application tool bar a pencil like icon click that
    Then go to group in the top menu bar
    In that if you choose insert
    Then a dialogue box will open
    In that give text and
    there will be two lines
    First is for internal no range
    second is for external no range with the check box ticked in grey
    In that you have to choose the second one and give only the range interval
    External tick is already there ready made in the system
    If you are sure that your settings are correct in MMNR
    IMG-L.G-MATERIAL MASTER-BASIC SETTINGS-MATERIAL TYPE---DEFINE ATTRIBUTES OF MATERIAL TYPES
    in this choose your material type and click on its details
    in the general data tab there is a external no assignmentw/o check a check box is there
    Pls tick that and try to do your process by giving external no
    Regards
    raja
    Edited by: ramanathan raja on Dec 4, 2008 2:27 PM

  • External number range for measuring point

    Hi experts,
    How to assign external number range for measuring point ?
    Regards
    Shashi

    I have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
    This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
    SAP documentation as follows:
    Create Number Ranges for Measuring Points
    In this step you define number ranges for measuring points.
    Notes
    As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
    Jim
    Edited by: JamesPetrie on Feb 28, 2012 2:45 PM

  • External number range for rebate agreement

    hi experts !!!
    can we give
    external number range for rebate agreement
    e.g . ab0039
    this number i want give for one of rebate agerrment
    please guide
    and is it possible the customer no and rebate agreement no are same
    ponts will be reward

    thanks friend
    i already did this by creating external number range AAA  -
    ZZZZZZZ
    and system allow me to give no like AB0056 
    and if  now i create new record by VBO1
    IF  i give external no system accept
    AND  if i don't give system generate his own no
    can u tell me exactly where i have to assign this number
    but there is no number object LIKE in t.code VNO1 there is no  01 or 18 so that i can mention in sales document type
    like......
    so how and where i have to assign
    points will reward

  • External number range for equipment number

    Hi All,
              How to maintain external number range for equipment number?( t-code IE01)
    Thanks in advance,
    Soumyendu

    Dear ,
    Go to...
    spro -
    pm/cs -
    master data in pm/cs ---technical objects ---equipment -equipment categoriesdefine number ranges
    Regards,
    Ishwar

  • External Number Range for Customer Master

    Hi,
    If we give External Number Range for a Customer Account Group in SPRO, Can we let the System to generate the Customer Number(Internal)? Or always we should provide a Number for the customer?
    Thanks,
    Sekhar.J

    Hi,
    System will not consider two Number Range Assignment, simultaneously.
    Here are few links:
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/01/a9b191455711d182b40000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/53/c9864aca3711d2b494006094b9114a/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/ea/cffb3aebc63b61e10000000a11402f/frameset.htm
    Best Regards,
    Amit

Maybe you are looking for

  • Problematic Thread in JVM and Weblogic

    My weblogic server crashes with this message. # HotSpot Virtual Machine Error, Internal Error # Please report this error at # http://java.sun.com/cgi-bin/bugreport.cgi # Error ID: 53484152454432554E54494D450E435050013E # Problematic Thread: prio=1 ti

  • Error 16 for Adobe Acrobat XI

    I have moved from old Mac Book Pro Leopard to new Mac Book Pro OS9. All Adobe aps work except for Adobe Acrobat XI which has error 16.

  • Why do I get a ClassCastException using JNDI between ears?

    This is an issue that has bothered me for almost a year. It comes up every once in a while and usually I can find a workaround, but I need to understand what is causing the failure. Here is the problem description as an abstract example: I have two W

  • Can't download patch 2.6.17-beyond1

    Hi, I want to build my custom kernel 2.6.17 with beyond patch but it looks like there is no possible to download this patch. It's strange becouse kernel-2.6.17-beyond1 is in extra repo! I looked on CVS: source=(ftp://ftp.kernel.org/pub/linux/kernel/v

  • Beats Audio cannot find startup file (HP Omni 220)

    When I try to access Beats Audio, I receive an error message stating that the startup file cannot be found. Product name: HP Omni 220-1020a OS: Windows 7 64-bit This question was solved. View Solution.