External Number Range setting for Equipment Not working

As per the Requirement I have assigned A00000000000 - ZZZZZZZZZZZZ to an equipment category through OIEN.
but I am getting the error message in the IE01 screen whenever I try to create an equiment with some external number for this category.
Equipment category does not allow alphanumeric equipment number
Can some one help whether anyother settings are needed.
(It is to be noted that system gives correct error message if I try to create equipment without giving external number - No internal number range defined for equipment category)
Regards
Jogeswara Rao

Hi Jogeswara Rao,
Check you other post for reply
Plant Maintenance & Customer Service->Master Data in Plant Maintenance and Customer Service->Technical Objects->Equipment->Equipment Categories >>>> Maintain Equiment Category >>>> select your category and check whether you have ticked "No Alphanumeric Equipment Numbers" or not.

Similar Messages

  • Locale setting for spanish not working in flex plugin

    I am using the following flex compiler setting in Flex builder 3 and it works fine to support Spanish Locale.
    -locale=en_US,es_US
    But the same setting is not working in eclipse installed with flex4 plugin running on flex 3.5 SDK. I am unable to build project with this setting. If i remove es)US then it works fine.
    Here is my whole compiler setting
    -locale=en_US,es_US -allow-source-path-overlap=true -source-path=locale/{locale}

    you might have to restart eclipse but you shouldn't have too.
    I'd check that Eclipse is actually looking at the sdk you think it is (Eclispe might be pointing to a different sdk than FlashBuilder 3)
    otherwise I am out of ideas
    do you have the error message?

  • Incoming email setting for Calendar not working

    Hello -
    I want to be able to send a meeting request from Outlook and have it show up on my SharePoint calendar.
    I followed the steps in this link to configure email for a 2013 farm:
    https://technet.microsoft.com/en-us/library/cc262947.aspx
    Basically I installed the SMTP server on my SP web server and configured the relay to accept all.     In Central admin, I enabled incoming email using Automatic mode. and set it to accept mail from all e-mail servers.
    My SharePoint site is http://sharepointdev.   SharePoint server is SPDEV1.     Maybe I am not setting my email server display address correctly?  I have that set up as <mylist>@sharepointdev1.com   (I don't
    think it matters what you call it here).
    I have also verified that under the Calendar list setting, under Communications > Incoming email settings, it is allowed to accept incoming email.  The email to use is <[email protected]  
    When I send the meeting invite, I get an outlook undeliverable on the above email.  Details are:
    Remote Server returned '550 5.7.0 Proxy session setup failed on Frontend with '554 5.4.4 SMTPSEND.DNS.NonExistentDomain; nonexistent domain''
    I must be missing a step somewhere.   Any other suggestions?   I've tried everything in the links below.  thanks
    https://support.office.com/en-in/article/Enable-and-configure-e-mail-support-for-a-list-or-library-dcaf44a0-1d9b-451a-84c7-6c52e7db908e
    https://social.technet.microsoft.com/Forums/en-US/8d767ef4-ba8f-47a4-9fa9-bb0115092079/can-i-configure-incoming-email-to-a-calendar-in-sharepoint-online-2013?forum=sharepointgeneral

    Hi XRS,
    Based on the error message, the email could not be routed correctly.
    What environment did you send email to SharePoint list? Is it an internal environment or external external environment?
    If it is internal environment, you need to make sure the domain is same with email address’s domain, and SharePoint server can parse the domain.
    If it is external environment, the email address’s domain need to be a public domain, SharePoint server must have public IP and the domain for SharePoint server must have correct MX record to ensure email can be routed correctly
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • External Number range for Production Order with additional logic

    Hi gurus,
    My requirement is -
    I have two products - for my Local and Export
    I have made two Order type for local and Export - say LOCL and EXPO
    My LOCL order no will start with L and EXPO with E
    I can do this with external number range set for each order type..
    Now my question is -
    My client wants Production Order in this fashion -
    L20111------
    L is local, 2011 is year, 1 is jan (1 to 9 - Jan to Sept, A - Oct, B- Nov, C - Dec) followed by a serial number
    How can we address this in SAP?
    Any clues?
    Thanks for your suggestion in advance.
    Regards,
    Srinivas

    Hai,
    You need to use User exit for this.  kindly contact your ABAP team.

  • External number range for Int Orders

    We want to define statistical internal orders employee-wise.  For each employee, we want to define statistical internal orders with the same employee number for monitoring the low-valued assets given to them. 
    My query is can we have external number range assignment for intrnal order type for this purpose ?

    Hi Niki
    The common practice is to Define the IO as the Employee No with a prefix of E.. It helps you to search the IOs easily as E*
    If the employee is also given a Mobile phone, Vehicle, laptop etc and you wanna track all of them and book all such relevant expenses in the same IO, then use exit COOPA003.. You can add Z fields in the IO Master for Mobile, Laptop No, Vehicle no etc
    You can also ask your ABAP team to create a search help (F4 help) based on these fields so that you can search the IO based on mobile no etc
    br, Ajay M

  • Measuring point External Number range

    Dear Masters,
    I am trying to create the external number range for one of my measuring point type. Is it not possible to do so? If no why? If yes how?
    Thanks to all in advance.

    Hello Vaibhav,
    I have already followed the steps given by you only I cannot find the assignment of measuring point category to the number range. I have also done the number range assignment for equipment and functional location but there it exists here it does not.
    It is also showing me the error of external number while creating the new measuring point. Please do guide about the assignment to the number range.
    Thanks again.

  • Some external number range are not valid for equipment creation

    Hi All,
    What could be the reason even though the external number range is maintained for equipment category as a combination of ALFA Numeric, for certain combinations, system accepts while creating Equipment and for certain combination of ALFA numeric number, system is throwing error " equipment number not in external number interval".
    Waiting for your valuable inputs..
    Thanks
    Surya

    Hi
    As your define No. Range is :000AAA-1000 to 000ZZZ-9999.You can Not use No which Involves the Alphbatic Value as "AAA" As it is begaining of your number range .You can Check another upcomimg number which just fall after "AAA" is "ABA"it will accept.Number which come with "AAA" will not accept by system.So you need to start your numbering form the next number of your Define Lower Limit(starting point) value that is "ABA-....."
    Regards,
    Rakesh

  • The external number range for Equipment master

    Dear Experts,
    My client has requirement to use KKS code as Equipment number as they want to create Notification and Maintenance order using the KKS code.
    For example 10H, 10BEB, 20BHB04, 10LBG10AA001, 10HLA13AA001A, 10ETG10AN001-E  etc.
    All these KKS codes has different character length hence it's not fit in any number range.
    can anyone suggest the external number range that I can use for above requirement?
    Thanks.

    Parag,
    I have checked again. It is working correctly. Remember that the following setting the check box below the column A should be empty. This allows Alphanumeric characters in the numbers.
    SPRO Path to above setting
    My Equipment category of External Numbers is 'A'.
    KJogeswaraRao

  • Alphnumeric External Number range for Equipment category

    Hi,
    Is there any other option that I can restrict length of external alpha numeric number range except that exit IEQM0003? This exit only applicable or restrict when you save the equipment.
    Requirement is like external number range should be like AAA-000 to ZZZ-999. System must not allowed any other equipment number which is out of this range. ( must be 7 character)
    As far as my understanding , system use string comparison once you use alphanumeric number range and you can create equipment with 18 char length except special character if above range is maintained.
    Please correct me if i am wrong and suggest.
    Thanks
    Anish Ahya

    Hi Zenith,
    Its not available in Standard SAP, please use the user exit and tell the ABAPER to check the Equipment numbering (count) before entering into Creation screen. In IE01,entering equipment Number, Category and date after completion of this activity when we enter continue icon there u can put a condition to check the length of equipment number. I implemented that user exit and i got the result. its working fine. User Exit: IEQM0003.
    regards
    Jalu

  • Any FM for create an external number range for equipment number ????

    Hi all,
    Any FM for create an external number range for equipment number??????
    thanks & regards
    indu.

    Hi
    you can use below FM to get number range
       CALL FUNCTION 'NUMBER_GET_NEXT'
        EXPORTING
          nr_range_nr                   = 'Z1'
         object                        = 'ZTEST'
         object                        = 'ZFIREC'
         quantity                      = '1'
         subobject                     = p_compcd
         toyear                        = p_fisc
       IMPORTING
         number                        = v_seqno.
    thanks & regards,
    bhupal.

  • External number range for equipment number

    Hi All,
              How to maintain external number range for equipment number?( t-code IE01)
    Thanks in advance,
    Soumyendu

    Dear ,
    Go to...
    spro -
    pm/cs -
    master data in pm/cs ---technical objects ---equipment -equipment categoriesdefine number ranges
    Regards,
    Ishwar

  • External number Range with leading zeros for Handling Units

    Hi Experts
        My requirement is to use the External number for the Handling Units provided by vendor.That number starts with 2digits"00"+18  for Example:00123456789123456789
      I am Using HU_VEKP Object for no range and maintaining
    External No Range From 00000000000900000000 to 00000000000999999999.
    But When i am giving Number 00000000000900000001 its only taking
    900000001.
    Kindly suggest me the right way to take leading zeros.
    Rewards for answer sure if it works.
    rajesh

    Hi Laksmipathi
                          I am maintaining the number range for External number range coz its vendor supplied HU.
               But the prefix zeros has meaning for identifying the Handling unit Functionality.In realtime IF prefix contains Say "0000" it refers to carton
    If prefix contains say "0010" it refers to pallet.
               So i need to satisfy there requirement.For example If it is for material number we can maintain In OMSL by check box of leading zeros.
                But i am not able to find any setting for this Handling units.U can check this object HU_VEKP in SNRO tcode where i am maintaining Number range.
    Thanks give suggestion
    RajeshS

  • External number range for measuring point

    Hi experts,
    How to assign external number range for measuring point ?
    Regards
    Shashi

    I have just checked and the measurement point number is linked directly with tthe object for eaxample equipment and when I tried this I got the same result the system defaults the number based ont he internal number range.
    This being the case what is the business requirement that you need to use external numbering as this may help and someone may be able to assist either with an answer to the problem or an alternative solution.
    SAP documentation as follows:
    Create Number Ranges for Measuring Points
    In this step you define number ranges for measuring points.
    Notes
    As the numbers for measuring points are assigned internally, you should work with the standard settings. If you want to make changes, you should always use number range 01.
    Jim
    Edited by: JamesPetrie on Feb 28, 2012 2:45 PM

  • External number range for Billing Document

    Hi Gurus,
    Can you please let me know how to get the external number for the invoices? I know there is no standard way but if there is a way around to determine it. And the external number should be first 2 places are alphanumeric and dynamic and the next 2 places are also alphanumeric but constant and the rest of the digits should be a serial number of length 7. So, the total length of the number range should be 11. Please let me know if there is way to determine it this way.
    Example:
    AB + HY + 1000001
    CD + HY + 1000002
    Like wise.....
    Thanks in advance.
    Regards,
    Gangi

    hello, friend.
    you can define your number ranges using VN01.  in here, you can set up alpha numeric ranges and specify external.
    technically, you can assign this set to the billing type using VOFA. 
    however, it is not best practice to assign external number ranges to billing types, as it is possible to 'jump' the sequence of the numbering.  you do want to keep track of the sequence of billing docs.
    a possible exception is if you have an external billing software which generates a number, which you will then capture in SAP.  barring exceptions, it is best to retain internal assignment.
    regards.

  • External number range for SUSPO in SUS-MM

    Hello there,
    I'm running ECC 6.0 with SUS-MM 5.0 (SRM server 5.5). When transferring ECC purchase orders from ECC 6.0 to SUS-MM the resulting SUSPO is created using internal number assignment.
    Thus I'm having an ECC purchase order 45xxxxxxxx referring to a SUSPO 30xxxxxxxx.
    I do have an external number range of 45xxxxxxxx in SUS-MM.
    Any suggestions/comments very much appreciated.
    Cheers,
    Franz

    Hi ,
    This is what i got from HELP
    >
    Define Number Ranges for Purchase Orders
    Use
    In this IMG activity, you specify the number ranges for purchase orders in SAP Supplier Self-Services (SAP SUS).
    Only carry out this IMG activity if you create purchase orders locally in SAP SUS.
    Activities
    1. Choose Changes Intervals -> Insert Interval.
    2. Specify at least one number range.
    Note that you must enter the number ranges specified here when you edit the transaction types. For more information, see
    Vorgangsarten festlegen.
    3. If you set the External indicator, suppliers can enter their own numbers in SAP SUS. If  you do not set the indicator, the system generates numbers automatically  (internal number assignment).
    Further notes
    To export number range objects,  go to the Maintain Number Ranges screen and choose Interval -> Transport.
    Note that,  before the target system imports the number range objects from the source system it deletes all of the intervals for the selected number range objects. This means that after the import, the target system only contain intervals that were exported from the source system.
    You cannot transport or convert dependent tables.
    >
    so according to this , it should be possible to have external number , please check wether you have maintained customizing for SUS purchase order numbers at correct place.
    reward poins if usefull

Maybe you are looking for