External Pioneer 116 Burner Not Recognized

My Pioneer 116 (Firewire) in a Bytecc case is now not recognized. Anyone else having difficulties? Printers work, don't see why this should have issues, but now I'm stuck using the internal Matshita, which I really don't want to use.

Same problem with my Pioneer DVR-111D, tried the suggestion of switching from Firewire to USB, it works. Burned CD in iTunes, OK. Have not tried to burn DVD in The Burn Folder (my homemade iMovies). However, I did make 4 nice coasters last night until I found this post. OS 10.6 needs to work with Firewire connection.

Similar Messages

DVD burner not recognized in Leopard by iDVD 7.0.1

Not exactly the same problem I found in my searches, so made a new topic.
Setup: G4 tower, dual Giga Design 1.8 GHZ, 1.5 MB RAM, Pioneer 109 burner.
System Profiler shows ability to burner everything including +r DL.
I had to use a 3rd party hack to get iMovie 7.1 installed. Leopard did not recognize my 1.8 processor as legitimate. It would recognize it if downgraded to 1.7 GHZ, but I chose not to do so. iMovie 7.1 (iLife 08) now launches and works, but I used iMovie HD to make this project.
1. I have burned other DVDs in Leopard with this DVD burner successfully, including a usable (proven) backup of my Tiger and Leopard DVDs, both DL.
2. I have over 100 GB space available on my Startup drive as well as 80 GB on another internal drive that is storing the iMovie project. The imovie project in question is 15 GB.
3. After creating the project in iMovie HD, I exported ("shared") to iDVD 7.0.1, chose a built-in theme and started the burn process. All was going well, so I went to bed. G4 set never to sleep for this project.
4. Next AM found that "error - .... disk not burned due to burner not recognized (error xxxxx). Didn't get the exact error number, but the iDVD project, when saved to Desktop was only 137 MB. The iMovie HD project is 15 GB, so iDVD should have created a project about 3 + GB.
5. Have NOT tried Apple Hardware test. Doesn't make sense to do so when the burner works fine in Leopard for other projects.
Is this problem due to iDVD 7.0.1 failing to be compatible with my G4 configuration like iMovie 7.1? Got no warning when installing or launching iDVD from iLife 08.
Any suggestions? I hope I've given enough useful info.
Incidentally, I'm not in a corner, as I copied the iMovie Hd project to a fW drive, and then used iDVD 7.0.1 on my MB Core Duo to render and burn it. Just want to find out what the problem is with my G4.

I'll try that. It may work as it is not iDVD making the determination if the optical drive is "qualified" but DU. As I said in my original post, I have burned DVDs in this internal burner using Leopard and a Finder Burn Folder. It is only iDVD that is between me and success.
I did manage to get the iMovie HD project burned using iDVD 7 on my Intel iMac. I will try editing another iMovie HD project, exporting to iDVD7, and saving as a disk image to a FW drive. I will report back the results, but it may be a day or two before that happens.
I should also probably try the same routine that failed on the chance that it was just a fluke.

My external hard drive is not recognized by my computer.

My external hard drive is not recognized by my computer. I used it earlier and it was fine however my computer froze and I unplugged my hard drive without properly ejecting it. Now when I plug it in nothing pops up. I've tried on three different computers and no luck. I hope this is fixable! Please help.

Care to share which OS you are using?
Repair permissions & restart your computer.
Zap the PRAM

New Pioneer DVD drive not recognized in profiler

I have used these forums many times to solve my problems so a big thanks to everyone who contributes. I've never had to actually ask a specific questions until now so here goes....
I have an e-mac running 10.3.9. My superdrive started to get flakey (not recognizing some DVD's, spitting them out, etc.). I followed all the advice here but no luck so I finally replaced the original drive with a Pioneer DVR-118. My problems still exist and the system profiler is telling me I have a Pioneer DVR-106. Did I do something wrong on the install? Shouldn't the profiler recognize the new drive?
A big thank you to anyone who can help me through this.

Since your computer's Apple Hardware Test is on a disc and the built-in optical
drive won't work, you may have to see if an external optical drive capable of
being used as a boot, is available. This of course would be a FireWire combo
type drive that can read & write DVD & CD media and boot Macs.
You may have to see if you can archive anything worth saving from that eMac
and put it on media via another computer; if the eMac can be booted into
Target Disk Mode where it is seen by another computer as a FireWire drive.
In fact, you could see (in a reverse scenario, perhaps?) if another computer's
optical drive could be used by your eMac, if a second healthy computer is
available & then boot it into FireWire Target Disk Mode to see if you can use
the optical drive in there as though it were a peripheral. - This may not work.
I've not had to really use FireWire Target Disk Mode, but do have cables,
and an externally enclosed LaCie FW HDD which is partitioned for clones.
There are times where a FireWire externally enclosed superdrive is handy.
There may be some damage on the logic board or some circuit that does the
controlling of ATA devices on one of the buses in the computer. That would
be a possible cause of the issue. If the identity of this drive can be changed
by the user before it is installed, be sure that is set correctly for use in eMacs.
{The three eMacs I've owned, had issues early on and I got rid of them in mere
days of first purchase; at considerable distance and effort by me. Then I got
an iMac which was an unholy terror to debug after an 'authorized service' ctr
did their best to kill logic boards and sell me defective store-brand RAM they
were authorized to install in a place I was not. ThreeThousand Miles and Six
Months later, I finally got my iMac back, repaired. Only because Apple told
them to read my test notes - & just install the parts I said it originally needed.}
Do you have a second Mac nearby (presuming yes, and using it online) which
may be used to attempta further diagnostic or testing of the eMac?
Not sure if an Apple Hardware Test would be sufficient to tell the issues in
your computer; if you have a way to make use of it via external FW. Hope-
fully someone with more extensive eMac and drive experience will advise.
Good luck & happy computing!

External hard drive is not recognized after attempt to format

I just got a new macbook and couldn't use my external hard drive because it was formatted on a PC and only allowed me to read the data. I backed up the data on the 250gb hd and then used Disk Utility to erase the hd and format it as "Mac OS extended (journaled)." After beginning, Disk Utility stopped working and showed up as "not responding" in the Activity Monitor.
Now the hd does not show up on the desktop and can only be seen in Disk Utility. If I try to erase again or partition the hd the utility stops responding. If I try to zero out the drive it continues to say "preparing to zero" indefinately. Now the hd is also not recognized by windows except in the windows disk utility, but it does not even give the option of formatting/initializing it, so that is not an option.
Has anyone ever seen anything like this before, or have any idea of something that I haven't tried yet. I really want to get the drive working and have exhausted all the ideas I can come up with. The internet has not provided too many ideas either.
Thanks so much for your help.
Black MacBook Mac OS X (10.4.6)

I have crazy solution to format it to FAT 32, it work a couple times on my several MAxtor, and Western Digital HD. But this is the last resort and if you are not handy and familiar, don't do it.
It happen on my external HD, so I crack the enclosure open, pulled the HD out and attached it as internal HD on a PC after adjusting the jumper to master and make sure no other HD attached to the motherboard. Make sure the motherboard detected (you can see it from bios menu).
Insert a bootable installer disk before XP ('98, ME, or 2000), and start from there until a promt comes, and type fdisk and you delete the old partition and create a new partition and restart once using the disk still and format it using FAT 32.
After that you put it back to the enclosure, and mount it to MacBook as a new HD with default factory format.
If you don't have the installer disk, this might help :
http://www.bootdisk.com/
But if your maxtor still under warranty better talk to them first and they might willing to reformat it for you.
Hope this help your external back and let you use it on your MacBook.

External Hard Drive suddenly not recognized

I have a WD 500GB external hard drive that I use to back up my data. I only have one hard drive as I'm currently living abroad and couldn't bring a 2nd with me.
I plugged in my external last night to back up my MacBook Pro and it backed everything up. I even went into Time Machine to go back and restore a file or two and that worked without problem. I have been using this drive for about a year to back up everything on my Mac and, although sensitive, it seems to work okay.
I plugged it in this morning and nothing. My Mac will not recognize that the drive is not plugged in in Time Machine or in Finder. If I go to Apple Logo > About This Mac > More Info... > Storage tab, it just shows my internal hard drive and my CD/DVD drive. If I click on Disk Utility with the drive plugged in, it shows my Hard Drive (Macintosh HD) with two icons, one inset below the other and both in black font, and then my external hard drive has two underneath, but only the top one is black font - the one underneath is greyed out.
It goes like this:
250.06 GB Hitachi...
     Macintosh HD
500.08 GB WD My Passport
     Time Machine Backups (greyed out)
Superdrive (greyed out)
When I clicked on the 500GB one and told it to repair/verify it said the disk was working fine. I tried unplugging and replugging in the drive (it is not recognized in Finder so I could not properly eject the disk). I restarted my Mac with it unplugged and plugged it in afterward and nothing.
The HD itself is working, the light is blinking (not solid) and I can feel the hard drive spinning, but I'm at a loss as to what to do to get my Mac to recognize it again.
Any suggestions would be helpful.
Thank you!

I also wanted to add, when I click on the greyed out Time Machine hard drive that's listed and then click "Info", this is what it says:
Name : Time Machine Backups
Type :           Partition
          Disk Identifier :           disk1s2
          Mount Point :           Not mounted
          File System :           Mac OS Extended (Journaled)
          Connection Bus :           USB
          Device Tree :           IODeviceTree:/PCI0@0/EHC2@6,1
          Writable :           Yes
          Universal Unique Identifier :           56EF6088-FFCE-300B-81D7-3E0986532AB5
          Capacity :           499.74 GB (499,735,552,000 Bytes)
          Owners Enabled :           No
          Can Turn Owners Off :           Yes
          Can Be Formatted :           Yes
          Bootable :           Yes
          Supports Journaling :           Yes
          Journaled :           No
          Disk Number :           1
          Partition Number :           2

My external USB drive is not recognized by Win XP

Hi!
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Thanks for any help!
/ Anders

Hi Anders and welcome to Discussions,
I have an external USB drive that is HTF+ formatted. It is not recognized by Windows XP. If I start the windows disk manager it gives me the option to initialize the drive. Do I dare to do this? Will it not erase the information on the drive?
Yes it will !!
Although with the BootCamp 3.0 Drivers (from the OSX Snow Leopard DVD) and the 3.1 Driver update (downloadable) Apple has introduced read-access to HFS+ partitions from Windows this feature seems to have some serious problems for some people.
Personally I see this feature as "experimental" at the moment.
XP itself knows nothing and therefor can not use/see HFS+ partitions and GPT (GUID partition table) harddisks.
You might wanna have a look (or buy) at MacDrive http://www.mediafour.com/products/macdrive/ which right now is the better solution.
Thanks for any help!
/ Anders
Hope it helps
Stefan

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

My external hard drive is not recognized

I have the apple external disk drive. I have used it numerous times. I just plugged it in and the computer is not recognizing it. I have tried both USB ports. How can I fix this?

A: USB desktop or 2.5" port powered?
B: did you just install mavericks
C: DOES IT show in disk utility?
Can you confirm it on another Mac?
Apple doesnt make HD, what HD is it marked as?
Likely its a dead SATA bridge card, a very very common problem with USB and external HD
see here:
Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
report back with more info

The external hard drive is not recognized by my macbook pro (yosemite).

The external hard drive that was recognized by my older iMac (snow lion), is not recognized by my new macbook pro (yosemite).
Can anyone help me with this? Thank you!

Can you see the drive in Disk Utility?
See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

New Pioneer DVR110D/Burn not supported

Systems Profiler: ATA-Bus 3, Pioneer DVD-RWDVR-110D, Revision 1.11, Drive Type CD-RW/DVD-RW, Disc Burning Not Supported, Removeable Media Yes, Detachable Drive No, BSD Name Disk 1, Protocol ATAPI, Unit Number 0, Socket Type Internal, OS9 Driver No. I have a Mac Power Graphics G4, OS 10.3.9. Disk Utility says DVD-RW is read only. I have installed Patchburn and Dragon Burn. I have reset PRAM and NVRAM. The computer does not show a CD when inserted in the 110D. The DVD disks OWC sent with my order result in "Disc drive not supported" and a long error number. I opened iLife 06 (a DVD) in the computer, copied it to my desktop, but don't dare install it until I can make a DVD copy of my photo library. I can burn nothing. I went back through 3 months of Apple DVD forum discussions, looking for answers. What do I do NOW? Thanks for any suggestions.

After running PatchBurn (for Panther) AppleSystemProfiler should report the drive as disk burning; supported (with a profile path listed). If this is not the the case, you need to run it again. The drive will not work with any Apple software without this profile.
3rd party apps don't need PatchBurn to function. You may in fact have a bad drive. If you cannot do a basic burn from the Finder after PatchBurn using media they supplied, I would ask for a replacement.
Check SysPref/Hardware/CD's&DVD's settings for blank media; if it is set to "IGNORE", the system will do just that.
DVD-/+R/RW can be burned from the Finder DVD-/+R DL can only be used in Tiger's Finder, or with 3rd party apps in Panther. iPhoto 5 does not append library burns like iTunes, so you have to manually choose the albums that fit within the 4.2GB disc capacity. maybe iPhoto 6 fixes this, I don't have it yet myself to check.

DVD content/burn not recognized

Approx half of my previously recorded DVD's content not recognized. The DVD is recognized as recordable (unused) when inserted, but actually has been burned and contains content. Content is mixed... RAW files/Aperture projects. Running on OS 10.6.8, 17" MBP.
Any suggestions?

If you can't boot from a recovery disc by turning the machine on, the drive is malfunctioning. Time for a repair.
If you simply can't see it in My Computer, see this document.
CD / DVD drive missing from 'My Computer' (Windows Explorer)
-Jerry

My external hard drive is not recognized on my new MacBook Pro, even though it is recognized on my older MacBook and other computers. Help?

Please help me find a solution to my new MacBook Pro not recognizing my hard drives. Yes, thats two hard drives I have that don't seem to work on this computer but both work on my older MacBook and many other computers.

It is formatted for both PC and Mac
I have tried finding it in Disk Utility, no dice...
Tried both USB Ports
And a reboot is still unsuccessful..

External hard drive is not recognized in Migration Assistantt

I had my hard drive replaced on my iMac, Mac OS 10.4.11, Snow Leopard.
I backup my computer using Time Machine onto an external hard drive.
In Migration Assistant, the external hard drive does not show up. There are no choices to choose to migrate from.
Any suggestions please!

See Pondini's TM FAQs, for starters.

External keyboard and mouse not recognized after waking from sleep

This started happening all of a sudden. It was working fine before that. When I disconnect the power cable, keyboard, and then connect them back, its not recognized. To make it recognize the keyboard and mouse, I have to logout and login or restart the laptop. I looked at this related post, but the PRAM reset fix did not work for me : http://forums.macrumors.com/showthread.php?t=870482
Any idea how to fix it?
OS version: 10.9.2
MacBook Pro 13-inch Mid 2012
Processor 2.9 GHz Intrel Core i7
Memory 16GB 1600 MHz DDR3

I have a similar problem on our G3 iBook with Panther. Most of the keys don't work, and of the four or five that do, they print only gibberish.
For a while I had control of the "C" key, and I was able to start from the Installation CD-ROM. I ran Disk Utility. It found and repaired a whole bunch of permissions and reported no problem with the hard disk. But I still cannot use the keys, and since then I've lost the use of the "C" also.
Because I cannot use the keyboard, I cannot type in my administrator's password, and for that reason I cannot use System Preferences to start from the Installation CD-ROM. I did not see the Hardware Test on the CD-ROM, but it sounds interesting.
Any ideas on how to get back to the CD-ROM when my keyboard doesn't work?

External Pioneer 116 Burner Not Recognized

Similar Messages

Maybe you are looking for