External power button?
My family wants to use my Powerbook (its screen is dying) in closed-lid mode with an external display. Is there any keyboard or other USB device with a power button that can start up my generation of Powerbook?
15" Powerbook G4 1.5 GHz Mac OS X (10.4.8)
Welcome to the Apple Discussions!
Make sure the computer is plugged in on the AC power adapter. (this is because the power requirements are higher for an external display.)
- Close the PowerBook's display. The PowerBook will go to sleep.
- Connect the external monitor.
- Turn on the external monitor.
- Connect an external Apple USB keyboard and mouse.
- Now the PowerBook will wake from sleep.
Next time when you want your Powerbook to sleep use the "sleep" option from the Blue Apple menu (on the left top).
Hopefully this is helpfull or solved your problem. Consider rewarding some points!
Please see the "helpfull" and "solved" button's on top off this message! Apple: Why reward points?
Similar Messages
-
Can i add an external power button to my mac?
I've got a Mac Pro early 2008 2.8ghz 8 core, I'm going to be putting my mac in another room, how can I add an external power on button?
Are there USB options? Or are there inputs inside the mac that I can connect too?
Many Thanks
MattYes I was going to Hide it under the stairs, and then have the basics on my desk in the attempt to cut down amount of cables.
I realise I can use sleep mode, but I want to avoid it being in standby to save on the electricity bill.
At the moment I don't have it all set up, but I think I may have just remember, but I have the 30" cinema display, I know its got a Power Button, can this be reprogrammed to Power the machine on and Off? I remember the option for sleep.
If anyone has it to check i'll be grateful.
Many thanks
Matt -
Testing keyboard connector with external power key
My PowerBook recently would not wake from sleep. I was unable to use the usual cmdctrlpwr to reboot it, so I removed the battery. Since then, it has not responded in any way to my pressing the power key. (The battery has all its LEDs and the power adapter turns colors when plugged in.)
I've had a few keyboard connector problems recently, so I tried reseating the connector to no avail. Additionally, an external USB keyboard's power key had no effect. My question is this: should the PowerBook G4 17" 1.33GHz respond to a power key on an external keyboard? If it should, then I can stop working on the keyboard connector and think about the power system and logic board.
I can't find any listing of computers on which this behavior is supported; if I missed something, please let me know. Thanks!most likely it's not supposed to work with the external power button on the keyboard.
if you are removing top case, there are "power button" contacts in the lower middle of the logic board which can be used for testing.
no power issue could be caused by bad keyboard/keyboard cable, since the power button connects thru the keyboard cable.
any taking aprt of laptops at home is risky though and could cause more damage. -
when i click on my external hard drive the screen goes dark and a msg pops up saying i have to shut down my computer by holding the power button and then restart it. when i do that i get the same result every time. it worked perfectly last night..
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Ifou don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
JohnHi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated! -
I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report: 1
Anonymous UUID: B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both! -
I have no external devices connected to my Mac mini but still everytime I use it after about half hour to an hour in whatever I'm using wether it's the Internet or iPhoto or iTunes the beach ball appears and I cannot get it to stop I always have to press and hold the power button and force it to switch off I then do a safe reboot and it starts up again fine but same thing again after a certain amount of time it will freeze. I have also had on some occasions a bright white screen with a folder and a flashing question mark appear but it's not because of any external devices as they have all been removed please can someone help me as I have no idea why this keeps happening to my computer and I'm worried that there's something seriously wrong it's only about 6 months old and I have no experience in dealing with computers ??
EtreCheck version: 2.1.8 (121)
Report generated 13 February 2015 15:33:46 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
LG TV spdisplays_1080p
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:11:35
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (398.54 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/AVG AntiVirus.app
[loaded] com.avg.Antivirus.OnAccess.kext (2015.0 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
[running] com.avg.Antivirus.gui.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.avg.Antivirus.infosd.plist [Click for support]
[running] com.avg.Antivirus.services.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
5% WindowServer
1% AVG
0% AppleSpell
0% fontd
0% cloudpaird
Top Processes by Memory: ℹ️
215 MB com.apple.WebKit.WebContent
125 MB avgd
107 MB Safari
90 MB Messages
69 MB WindowServer
Virtual Memory Information: ℹ️
171 MB Free RAM
1.68 GB Active RAM
1.53 GB Inactive RAM
637 MB Wired RAM
1.34 GB Page-ins
2 MB Page-outs
Diagnostics Information: ℹ️
Feb 13, 2015, 03:20:28 PM Self test - passed
Feb 6, 2015, 08:08:07 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-06-200807_[redacted].panic [Click for details] -
My Ipod nano power button wont work while headset are in, how do i fix it?
Hello, I got myself a iPod nano 6th gen. and I'm already having problems with it. I got it from ebay and it was working all good, expect one day the power/sleep button just stop working when the headset are plugged in.
so this is how I can somewhat make it work on it but it still stinks to work with it like this. When I have no head set plug in, it works all fine. The power/sleep button is okay, the volume button is okay, and the touch screen is okay, but once I plug the headset set in, if shut off after 1 second, and cant turn it back on, then if i plug my power cable in then I can use the touch screes, but the power/sleep button doesn't work as well the volume buttons. Now if I do a soft reset with the power button and down volume and get the apple logo on, I can quickly get the headset plug in and play the music with out the power cable in, but still cant use the button at all. Also when I have it plug in to the power cable then plug in the headset, it shut off until I replug in the power cable or remove the headset to turn it back on.
How can I fix this? I tried the factory reset through iTunes, and it didn't help. I try the diagnostic and that didn't help. Should I just send it in and pay for the repair cost or what?The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an Apple store or call the Apple iPod tech support if still under warranty or you have Apple Care. -
How do I get the backlight to stay on, when connected to charger / external power ?
Hi,
Is there a way of setting the backlight on my 8900 Curve so that when it is connected to the USB or Mains charger,
( and therefore not draining the battery ) the backlight stays on ?
I can only find settings in Options / Screen/Keyboard, which I have set to leave the backlight on for 90 seconds, and dim automatically ?
Obviously I don't want to leave the backlight on for longer than necessary when it is NOT connected to external power,.
I was hoping that there are either some separate settings that I haven't discovered,
which only apply when connected to external power, or failing that maybe an App that will do the job ???
Thanks,
If you found my answer ( or anyone else's ) to be helpful, don't forget to click the Kudos button !Coconut wrote:
Hi,
Is there a way of setting the backlight on my 8900 Curve so that when it is connected to the USB or Mains charger,
( and therefore not draining the battery ) the backlight stays on ?
I can only find settings in Options / Screen/Keyboard, which I have set to leave the backlight on for 90 seconds, and dim automatically ?
Obviously I don't want to leave the backlight on for longer than necessary when it is NOT connected to external power,.
I was hoping that there are either some separate settings that I haven't discovered,
which only apply when connected to external power, or failing that maybe an App that will do the job ???
Thanks,
When you first plug your phone in, it should go to the clock and that does stay lit. Other than that, there is no way to set the phone so that balcklight stays on. -
P35 Platinum: I have to press the power button multiple times to start
Hello fellow MSI customers,
as written in the subject, I have a problem with starting my PC. When I press the power button, the computer powers on, but there is no output to the screen. In fact, my LCD stays in standby mode. I can hear the fans running, so something is going on. According to the LEDs on the mainboard, it is a memory problem.
Now I turn the computer off, using the power button (have to hold it for a few seconds). When off, I start again and everything runs as it should.
After starting, I ran memtest86 multiple times without any errors. I ran a few games, compiled some programs, installed Vista 64bit, Linux, all without any crashes or hangups. It is just the starting that makes problems. After booting it is very stable.
Seeing that it could be a memory problem, I brought another pair of memory, just to be sure. I couldn't reproduce the problem on that day! Any type of memory I put in (the one before, or the newly brought home) the computer always started on the press of the button. So I thought, OK, maybe they were not seated correctly. But, alas, two days later it is again only starting by pressing the power button three times.
What I tried:
1. Boot using only 1 piece of memory stick
2. Boot using only 1 piece of memory, but different one
3. Use another pair of memory <- worked, but on that day it also worked using my original memory
4. Disconnected everything except graphics card, to make sure it is not a power supply issue (minimized power usage)
5. Tried all of the above with a different processor
6. Used another power supply
Any other ideas?
Here are my specs:
MSI P35 platinum
Core2 Q6600
Nvidia 7900GT
4GB V-Data DDR2 800MHz <--- I think this is the problem, any experiences?
Enermax Liberty 400W
a few other things (HDDs, XFi, DVD-RW)
By the way, how can I boot from an external DVD-RW? It doesn't show in the menu when I press F11 (boot menu).
Thank you for any help, muro
And just to let a bit of steam off:
1. I had major problems with the RAID controller (not MSI fault, rather intel) - I put two disks into a RAID 0, then RAID 1 and they always failed after a few boots - member missing on both disks. I was getting angry, so I put them as normal (non RAID) disks and everything is fine since, although no RAID.
2. Installing anything except windows with an IDE DVD-RW is very hard. It took me ages until I got Ubuntu booting (there are guides on the net, google is your friend), and much longer to get grub (boot loader) working. Long story short - if you have multiple disks, use the Linux disk as the bootable, do NOT put grub on the disk where Vista is installed.
3. I have no idea, how to update the BIOS, if I had to. I'm using 1.1 that came on the board. I use 64bit Vista and Linux, none of which is supported to upgrade the BIOS. Any hints how to do it (if I needed to)?Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro -
A few days ago my G5 started to freeze up while in use. It doesn't matter if in Safari, iTunes, Pages, etc. The cursor will not respond nor does any keystroke, force quit, escape, etc. I have to hold the power button down to shut the computer down. Then, try to restart. Sometimes restart will work and the computer will work for a while and then freeze again. Other times on restart, instead of the Apple logo at start up, I get a Zero with a line thru it, have to power off and restart again. When it does restart, the "spinning gear" takes a lot longer than normal to spin up and take me to the login screen. Have been told it may be my hard drive getting ready to fail. Have looked at disk utilities, S.M.A.R.T looks fine, "verified" and have verified disk, and repaired permissions. In case it is the hard drive, I bought external hard drive and hooked it up to Time Machine. The backing up to a long time, overnight, about 10 hours because it kept freexing up and I would have to shut down and try restarting again. Finally got everything backed up.
Any help or suggestions greatly appreciated!!! Could it be my hard drive is dying? Is the the normal chain of events or is it something else???Ok, to copy the Drive from one to another, get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Believe it or not, anything on the Desktop uses 3 times the Resources of the Mac than if stored elsewhere, I can note a slowdown from just 30 items on the Desktop on a really fast Mac, so the less the better on the Desktop.
DW will not tell you about Bad Sectors, it's just the very best at Repair Directory damage & such.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process. -
Hi I have an Imac I5 21.5 inch.It was working perfectly.Then i didnt use that for about 2 months. Week ago when i want to start the Imac ,it didnt start.
When press and hold or keep on pressing the power button then i hear the fans are working and i get a continuous beep( but low freqency tone).
But screen does not turn on.Please help me to rectify this problem.Best Regards. By the way I am an electronic technician.So if there are any technical things to be done, Pls let me know.I can do it my self.Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
Wife's Mac Book Pro locked up. She shut it down by holding power button unitl it shut down, when she powers it up now it will not allow her to log in on the log in screen. Any suggestions?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I am trying to factory restore my macbook air, I tried following a youtube video performing the option + power button and am only getting the macintosh HD option not the recovery HD option. Is there another way to reset the computer?
The proper shortcut is COMMAND-R, not COMMAND-PowerButton. See the following:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Maybe you are looking for
-
Any examples of a data template using multiple data sources?
I'm looking for an example report using multiple data sources. I've seen one where they do a master/detail but I'm just looking to combine results in sorted order (sorted across all data sources). The master/detail used a bind variable to link the tw
-
When I use the oracle text search in UCM, I get an error: !csUserEventMessage,Administrador,lgcucmlabdev1.cpd.edinfor.pt:16200!$!csSearchUnableToReturnResults intradoc.common.ServiceException: !csSearchUnableToReturnResults *ScriptStack GET_SEARCH_RE
-
Migrating OBIEE 11.1.1.7 RPD and CATALOG
Hi Gurus, We have two environments in our project DEV and TEST where OBIEE 11.1.1.7 is installed. We are using weblogic Internal Security in DEV and we have 3 users and a role by name App in DEV. Now after Migration I am having 3 issues: 1) After dep
-
We are connected to a Xerox DocuColor 240 using the LPD protocol and we are experiencing very long spool times for everything we print. It doesn't matter what application. I can print from other Macs to this same printer and the documents sail right
-
hi, i created back up through SBO Backup (SAP Business One Service Manager ) i got the Back up files and all Attachments folders. But i want to restore this (.bu) and .zip files into existing company database while creating time i got these files: on