External Presenter removed from meeting after 1 hour of presenting

Any time we have give presentation rights to an external customer who is coming in as a guest and using the web access to the meeting, and they are presenting for over 1 hour they are removed from the meeting while still actively presenting content.
They must then rejoin the meeting and start presenting again.
If the meeting organizer is presenting material to these same types of connection, they are not removed when they are just viewing what is being presented.
It is only when they are presenting for more than 1 hour, that the external presenter is removed.
It has got to be some sort of timer, just not sure where to look to find it.
Any thoughts or suggestions?
Thanks, Mike
Mike

Hi,
I test the issue as a guest with Lync Web App, but not face the same issue.
Please check if all users meet the same issue or just happen once.
Please make sure Lync Server update to the latest version and then test the issue again.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Similar Messages

Removing user access after hours

All,
We are running Oracle 10g. What is the best way to remove user access after hours say from 5:00 pm to 6:00 am? I have searched this site and the only thread that I found was Can I limit user access to Oracle DB based on time?? which is not helpful to me. My manager wants users to access the Database only during the user's work hours which is M-F 8:00 am - 5:00 pm. Any suggestions would be greatly appreciated.
Seyed

>
Creating a logon trigger will need a restart of the database, but I think it is the best approach.
Am not sure why restart would be required?
Possibly creating a seperate listener entry on a different port especially for the users could also be a solution.
Then after 05:00 pm, stop that perticular listener only
HTH
What if I know the port number of another listener?
FJFranken
My Blog: http://managingoracle.blogspot.com
If this answer satifies your question, mark the question as answered and award the points. It is appreciated!Regards
Anurag

HT204022 I have owned an ipad for a few months and taken photos without synching to Photstream. Having just done this I now see photos are removed from iCloud after 30 days. Are these recoverable or lost for good?

I have owned an ipad for a few months and taken photos without synching to Photstream. Having just done this I now see photos are removed from iCloud after 30 days. Are these recoverable or lost for good?

Please see the following:
iCloud- Photo Stream FAQ
iCloud- Photo Stream limits
The 30 day limit, as I understand it, prevails after you reach one of the prevailing number limits. I've yet to reach one of those limits over the past few years and my PhotoStream is still intact.
However, it's a good idea to move your photos into iPhoto which is your on-disk library. And, this library can be backed up locally, thus, preserving your photos.

ITunes album artwork randomly removed from iPhone after sync.

iTunes 12.1.0.50. IOS 8.1.3. iPhone 5. 23GB free space on iPhone.
Album art is randomly removed from iPhone after sync. This seems to be new to the recent version of iTunes.
Removed and reinstalled all music. No help, problem still occurs.
Restored iPhone as a new iPhone and reinstalled all music. At first, all artwork was installed, but on later sync, random artwork was removed or missing. Problem reoccurs.
This appears to be a bug in the software somewhere.
Anyone having similar problems?

welcome to my world....
i have had this at least three times now in the past month.
I too had to do a factory reset and set up a a new phone.
i read an article about it being a known issue and something to do with duplicate tracks causing it to hang during sync. it then fills up the available space with the dreaded "other" data and hey ho you have no music.
have a look at this, hope it helps and hope Apple get it fixed as it is affecting a lot of people
http://robservatory.com/a-nasty-little-itunesios-bug-may-be-causing-media-sync-i ssues/

Workflow 2013 is not removed from library after retract

Hello.
I created a test workflow 2013 in VS 2013, while adding this workflow to the project I selected document library for it and also selected pre-created tasks and history lists.
I deployed the worklow from VS project menu, then started it manually in the library, worflow completed successfully.
After it I called "Retract" from VS project menu, it completed without errors, but teh workflow stayed in library. Then I deployed it again, went to the library workflow settings, removed the workflow, retracted it again using VS project menu.
But, now when I go to library - workflow setings - add workflow, I still can see there my workflow option (though the solution is retracted and feature is removed from site collection).
What should I do to remove it?

OK, here are the log entries for solution deploy and retract:
Updating SPPersistedObject SPFeatureDefinition Name=FeatureDefinition/15/90531efa-67c7-45e6-8272-a061cc856924. Version: -1 Ensure: False, HashCode: 21145693, Id: 643508a2-1da2-4b52-99d5-1855c34bbee6, Stack: at Microsoft.SharePoint.Administration.SPPersistedChildCollection`1.Add(T newObj, Boolean ensure) at Microsoft.SharePoint.Administration.SPFeatureDefinitionCollection.AddCore(SPFeatureDefinition featdef, SPSite site, String solutionHash, Boolean fForce, Boolean fDoValidation, String pathToFeatureAndElementManifestXsdFile) at Microsoft.SharePoint.Administration.SPFeatureDefinitionCollection.AddInternal(String relativePathToFeatureManifest, Int32 compatibilityLevel, String pathToFeatureAndElementManifestXsdFile, Guid solutionId, String solutionHash, SPSite site, Boolean force, Boolean fDoValidation, SPFeatureDefinitionContext featureDefinitionContext) at Microsoft.SharePoint.Administration.SPSolutionPackage.AddFeatureDefinitions(SPFeatureDefinitionCollection featdefCollection, SPFeatureDefinitionContext context, Boolean force, SPSite site, SPWeb web, Int32 compatibilityLevel) at Microsoft.SharePoint.Administration.SPUserCodeSolutionPackage.AddFeatureDefinitions(SPSite site, SPWeb web, Boolean force, SPUserSolution solution) at Microsoft.SharePoint.SPUserSolutionCollection.<>c__DisplayClass7.<AddOrUpgrade>b__6() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPUserSolutionCollection.AddOrUpgrade(SPUserCodeSolutionPackage solutionPackage, Int32 solutionGalleryItemId, SPUserSolution existingSolution) at Microsoft.SharePoint.SPUserSolutionCollection.AddOrUpgrade(SPListItem item, SPUserSolution existingSolution) at Microsoft.SharePoint.SPUserSolutionCollection.Add(Int32 solutionGalleryItemId) at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) at System.Delegate.DynamicInvokeImpl(Object[] args) at Microsoft.VisualStudio.SharePoint.Commands.SharePointCommand.Execute(SharePointContext sharePointContext, CommandFlags flags, Byte[] serializedParameter, ISharePointCommandLogger logger) at Microsoft.VisualStudio.SharePoint.Commands.CommandManager.ExecuteCommand(SharePointContext sharePointContext, String commandId, CommandFlags flags, Byte[] messageBody) at Microsoft.VisualStudio.SharePoint.Commands.RemoteCommandService.ExecuteCommand(String commandId, CommandFlags flags, Byte[] messageBody)
Feature Installation: Installing Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') into the farm.
Entering monitored scope (Feature Installation: Installing Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') into the farm.). Parent No
Feature Installation: Calling FeatureInstalled method for Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924', Compatibility Level: 15).
Leaving Monitored Scope (Feature Installation: Installing Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') into the farm.). Execution Time=0.163841146451115
Feature Activation: Activating Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') at URL http://devsrv.
Calling 'FeatureActivated' method of SPFeatureReceiver for Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924').
Feature Activation: Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') was activated at URL http://devsrv.
Leaving Monitored Scope (Feature Activation: Activating Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') at URL http://devsrv.). Execution Time=1961.3532869094
Feature Deactivation: Deactivating Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') at URL http://devsrv.
Calling 'FeatureDeactivating' method of SPFeatureReceiver for Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924').
Feature Deactivation: Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') was deactivated at URL http://devsrv.
Feature Uninstallation: Uninstalling Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') from the farm.
Entering monitored scope (Feature Uninstallation: Uninstalling Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') from the farm.). Parent No
Feature Installation: Calling FeatureUninstalling method for Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924', Compatibility Level: 15).
Leaving Monitored Scope (Feature Uninstallation: Uninstalling Feature 'TestWorkflows_Feature1' (ID: '90531efa-67c7-45e6-8272-a061cc856924') from the farm.). Execution Time=0.0583684084232099
Deleting the SPPersistedObject, SPFeatureDefinition Name=FeatureDefinition/15/90531efa-67c7-45e6-8272-a061cc856924.
Looks OK.

Is it possible to know when the sim card was removed from iPhone after been stolen?

My iphone got stolen and I could see that my ipad got trouble with itunes and icloud. Is it possible to know when the sim card was removed from iphone?

no,

Consolidate Library to External HD & Remove From Internal

My daughter has an MacBook and her internal hard drive is full -- she keeps getting "your startup disk is full" warnings. Her music is 60 or 70 GB and is obviously throwing things off.
I bought her an external HD and moved all her music over but it seems I missed something else.
Things are more complicated as she is away at school so I'm trying to help her remote.
Over the holidays she traveled with her laptop and no external and added some music -- obviously to her internal.
So now we need some help. How does she:
1 -- consolidate the music on her laptop and on her external so she ends up with one copy of everything in a library on the external.
2 -- remove the music from the internal to free up space.
3 -- make sure iTunes knows that the external is her home library and that any new music / podcasts / videos / ... will load there and not to her internal.
and in the long run ...
4 -- how can she travel with the laptop -- temporarily load music from the master (external) library so she can have music on the road -- what I call "using the MacBook like an iPod.
The internal capacity is something like 150 GB and the external is a 500. I partitioned the external and have directed her to back up everything now on her internal (including all that music) to one partition. The other partition on the HD is where I set her library. The music did move once but obviously I missed something.
Any thoughts?
She is running the latest iTunes 9.0.2 on an intel 13" MacBook with OS X 10.4.11
Thanks

greetings James !
see if this read points you in the right direction.

IPhone5 Notes removed from phone after syncing with iTunes

This morning my wife came to me with her iPhone5 complaining that her notes in the Note app have disappeared. After investigating on her laptop we found them in her Yahoo folders but they weren't on her phone. Strange. I had all my notes on my iPhone5. So we went to work and I researched the issue. Found out that there are a lot of people out there with this same issue. This evening I backed up my iPhone5 wirelessly to my computer. I restored my wife's phone to her last back up that she said had her notes. No good - not there. So I reset her phone back to factory setting and restored from her backup. In the mean time, I plugged my phone in to my computer to check on some setting. Lo and behold, my notes have disappeared too! Of course they are all in Yahoo, but what's strange is that not all of my Yahoo notes disappeared. So it has something to do with syncing with iTunes with the wire, not wirelessly. I just restored my phone to today's backup and I suspect that since I'm tethered to my computer, the restore put them back and iTunes removed them. Since I cannot see the Notes folder in the email app - what good is it to sync them to Yahoo? Ridiculous. So the key is to NOT tether your phone to iTunes and sync wirelessly. Now I am going to have to go through the process of emailing all my notes back to myself and copy them into Notes.
Any one have a better cost-effective solution?

Follow up to my earlier post. It appears that the notes that "disappeared" from my iPhone fit in a certain date range. Seems to be June and July. A note I created in August didn't disappear. So I just emailed the notes from June and July to myself. I created new notes on my iPhone in the Notes app for my Yahoo account. Automagically they appeared in my Yahoo folder and didn't disappear from my iPhone when I synced again. Solution?

Adobe Connect user dropping from Meeting after ~30sec

We have a lot of users using Adobe Connect from multiplae sites around the country. One particular site (and one site only) is having difficulty staying connected to a meeting. They are able to successfully log into the meeting and can see the meeting room. After ~30 seconds each time they are booted from the room. Is this a common problem that anyone has seen? The only other problem we have come accross is users getting stuck at the loading screen and the meeting never launching but thet had to do with not allowing the FMS ip address through firewalls.
Had anyone else experienced users being disconnected after ~30 seconds. It happens every time they try to connect. Apparently it goes to a "Connection lost, waiting to connect" screen. I know they are not physically losing connection as other services stay online. Some idea we had were packet inspection or time to live settings. Any ideas?

It sounds to me like there is some other issue with their connectivity. It could be an IT policy that monitors for streaming traffic and intrupts it (to keep people from watching movies or such), or it could even be a saturation of their network, and Connect doesn't have priority so it gets dropped. From your description it definitly sounds like there is something happening at that location that is preventing individuals from attending the meetings.

Tv episodes removed from iPod after syncing

I'm a complete novice when it comes to the whole iPod/iTunes thing. So maybe this is just a setting thing, but can anyone tell me why everytime I plug my iPod up to my laptop to charge and of course iTunes opens up and does it's whole syncing thing. Well everytime it syncs it takes away various tv episodes off my iPod. From what I can tell it removes the ones I've watched and leaves the new ones alone.
I tested my theory by marking them all new on iTunes and resynced and all the episodes reappeared.
Can anyone tell me why? Is there some setting change I need to make? Any help would be much appreciated.

When you iPod is plugged in, go to the TV Shows section on the sync screen. It should let you choose certain things, and yours probably says "Sync Only Unwatched Episodes". You can change it by selecting somethings else and saving your changes. Hope this helps.
-*thisismyname.

Events removed from calendar after 6 weeks

I have noticed that events are deleted from my calendar on iphone and macbook air after 6 weeks, can I resolve this?

Go to Settings --> Mail, Contacts, Calendar, scroll down to the point Calendars. There must be the tab Sync. Switch it to All Events. Do this aswell in preferences of your mail on you mbAir

Podcasts not removed from iPhone after playing

Hi
Since updating to iOS 5 on my iphone 4, I've been having a few issues with the syncing of podcasts. For some, not all, of them, once I've fully listened to them on my iPhone, syncing with my macbook pro doesn't remove them, even though itunes on the mac has them shown as played, and the iPhone's podcast settings within itunes are set to only sync the last 10 unplayed podcasts, with the individual podcast episodes in question no longer being ticked in the podcasts settings page. Coincidentally, or perhaps not, on the iPhone, these podcasts have no date held against them and also have weird running times of like 0:02 or 0:03, when in iTunes on the Mac they're detailed correctly.
This isn't a massive issue, but it's becoming a pain in the neck. Has anyone else encountered it, or actually found a reason / fix?
Thanks

welcome to my world....
i have had this at least three times now in the past month.
I too had to do a factory reset and set up a a new phone.
i read an article about it being a known issue and something to do with duplicate tracks causing it to hang during sync. it then fills up the available space with the dreaded "other" data and hey ho you have no music.
have a look at this, hope it helps and hope Apple get it fixed as it is affecting a lot of people
http://robservatory.com/a-nasty-little-itunesios-bug-may-be-causing-media-sync-i ssues/

Images not removed from memory after being disposed of

I am trying to load an image, take a thumbnail of the image, store the thumbnail in an arraylist and then discard the image before moving on to the next one.
Here is some compilable sample code. it brings up a open file dialog. select a few images and watch as the memery usage goes through the roof (make sure they are decent size, i am using 1600x1200)
I think the reason it is not working is because the image isnt being flushed after the thumbnail is taken as there is still a reference to it in mem.
any body any ideas?
<code>
import java.awt.Image;
import java.io.File;
import java.util.ArrayList;
import javax.imageio.ImageIO;
import javax.swing.ImageIcon;
import javax.swing.JFileChooser;
import javax.swing.JOptionPane;
public class Thumbnail {
public Thumbnail(){
File[] files;
int i=0;
ArrayList list = new ArrayList();;
JFileChooser fc = new JFileChooser("C:/");
fc.setMultiSelectionEnabled(true);
int returnVal = fc.showOpenDialog(null);
if (returnVal == JFileChooser.APPROVE_OPTION) {
files = fc.getSelectedFiles();
for(i=0; i<files.length; i++) {
list.add(openImage(files));
JOptionPane.showMessageDialog(null, "Added " + i + " images", "Done", JOptionPane.ERROR_MESSAGE);
System.exit(0);
public ImageIcon openImage(File file){
Image tempImage = null;
try{
tempImage = ImageIO.read(file);
} catch (Exception e){}
return new ImageIcon(tempImage.getScaledInstance(-1, 100, 0));
public static void main(String[] args) {
new Thumbnail();
</code>
thanks
kevin

With ImageIO, you can set subsampling rates and never create that original monster image:
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import java.net.*;
import java.util.*;
import javax.imageio.*;
import javax.swing.*;
public class AllThumbs {
    public static void main(String[] args) throws IOException {
        URL url = new URL("http://www3.us.porsche.com/english/usa/carreragt/modelinformation/experience/desktop/bilder/icon3_1600x1200.jpg");
        BufferedImage[] images = new BufferedImage[2];
        images[0] = readSubsampling(url.openStream(), url.getPath(), 240);
        images[1] = ImageIO.read(url);
        displayImages(images, new String[]{"thumbnail","original"});
    public static BufferedImage readSubsampling(InputStream in, String suffix, int maxSize) throws IOException {
        ImageReader reader = getReader(suffix);
        reader.setInput(ImageIO.createImageInputStream(in), true, true);
        ImageReadParam param = reader.getDefaultReadParam();
        int size = Math.max(reader.getWidth(0), reader.getHeight(0));
        int subsampling = size/maxSize + (size%maxSize != 0 ? 1 : 0);
        param.setSourceSubsampling(subsampling, subsampling, 0, 0);
        BufferedImage image = reader.read(0, param);
        System.out.println("Size = " + size + ", maxSize = " + maxSize + ", w = " +
            image.getWidth() + ", h = " + image.getHeight());
        reader.dispose();
        return image;
    public static ImageReader getReader(String path) throws IOException {
        String suffix = getSuffix(path);
        Iterator readers = ImageIO.getImageReadersBySuffix(suffix);
        if (!readers.hasNext())
            throw new IOException("No reader for suffix " + suffix);
        ImageReader reader = (ImageReader) readers.next();
        if (readers.hasNext())
            System.out.println("(There are more readers for suffix " + suffix + " )");
        return reader;
    public static String getSuffix(String path) throws IOException {
        int dotIndex = path.lastIndexOf('.');
        if (dotIndex == -1)
            throw new IOException("Suffix not found for " + path);
        return path.substring(1 + dotIndex);
    public static void displayImages(BufferedImage[] images, String[] titles) {
        JFrame f = new JFrame("total #images = " + images.length);
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        Box imagePanel = Box.createVerticalBox();
        for(int i=0; i<images.length; ++i) {
            JLabel label = new JLabel(new ImageIcon(images));
label.setBorder(BorderFactory.createTitledBorder(titles[i]));
imagePanel.add(label);
f.getContentPane().add(new JScrollPane(imagePanel));
f.setSize(450, 400);
f.setLocationRelativeTo(null);
f.setExtendedState(Frame.MAXIMIZED_BOTH);
f.setVisible(true);

Remove from ipod after FULLY played

I found the nice little setting of "update: only unplayed episodes" for uncluttering my ipod with episodes i've already listened to, but it seems a bit aggressive. It just goes and deletes any podcasts that i may have been in the middle of when i went to sync.
Can't there be a way to force it to keep it on the ipod until it has a play count of 1 or greater?

Here is a little applescript diddy I wrote based loosely on "Whack Current Track" on Doug's scripts site (http://www.dougscripts.com/itunes/)
Paste the following into script editor and save the script in your itunes script folder. I call it "Whack Finished Podcasts.scpt"
==== cut ===
global addenda
tell application "iTunes"
set addenda to ""
set deletedFiles to false
set ofi to fixed indexing
set fixed indexing to true
set playedCasts to (tracks of playlist "Podcasts" whose played count > 0)
repeat with oldPodcast in playedCasts
try
set dbid to database ID of oldPodcast
set cla to class of oldPodcast
try
set floc to (get location of oldPodcast)
end try
-- delete (some track of current playlist whose database ID is dbid)
try
delete (some track of library playlist 1 whose database ID is dbid)
end try
if cla is file track then
my deletethefile(floc)
end if
set deletedFiles to true
on error msg
if addenda = "" then
set addenda to "Some podcasts could not be deleted:"
end if
set addenda to addenda & "
• " & msg
end try
end repeat
set fixed indexing to ofi
if addenda ≠ "" then
display dialog addenda buttons {"Darn"} default button 1 with icon 1
else if deletedFiles then
display dialog "Done. Postcasts which you have completed playing are in the trash." buttons {"Thanks!"} default button 1 with icon 1
end if
end tell
to deletethefile(floc)
try
tell application "Finder" to delete floc
on error
set addenda to "Done. However, the file could not be moved to the Trash."
try
tell application "Finder" to open container of floc
end try
end try
end deletethefile
==== cut ===
MacBook Pro Mac OS X (10.4.6)
PowerBook G4 Mac OS X (10.4.6)

Oracle AQ: Message not removed from source queue after propagation

Hi.
I have been playing around with a test setup for a "fanning out"-propagation system.
I have created three queues, SRC_Q, DEST_Q and DEST2_Q.
The propagation seems to work fine, the messages that I put on the SRC_Q get propagated to the destination queues. However, after propagation the message does not get removed from the source queue. Could anyone tell me why?
I am using Oracle 10g.
Here is my setup:
--Test payload
CREATE OR REPLACE TYPE test_payload AS OBJECT(
test_id NUMBER,
test_dt DATE);
commit;
DECLARE
subscriber SYS.aq$_agent;
BEGIN
--- Create Originating Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'SRC_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'SRC_Q', 'SRC_MQT' );
DBMS_AQADM.start_queue( queue_name => 'SRC_Q' );
--- Create Destination Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest_Q', 'Dest_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest_Q' );
--- Create Destination Queue2 and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest2_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest2_Q', 'Dest2_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest2_Q' );
--- Add Subscribers and schedule propagation
subscriber := SYS.aq$_agent( 'test_sub', 'Dest_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE);
subscriber := SYS.aq$_agent( 'test_sub2', 'Dest2_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE );
--Propagation to queues
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest_Q' );
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest2_Q' );
commit;
END;
--Put something on the queue
DECLARE
message_handle RAW( 16 );
MESSAGE test_payload;
nq_opt dbms_aq.enqueue_options_t;
nq_pro dbms_aq.message_properties_t;
begin
nq_opt.visibility := dbms_aq.immediate;
nq_pro.expiration := dbms_aq.never;
MESSAGE := test_payload( 2, SYSDATE );
DBMS_AQ.enqueue( 'SRC_Q', nq_opt,nq_pro,MESSAGE, message_handle );
COMMIT;
END;
I am really stuck with this problem so I really hope somebody have some advice on what I am doing wrong.

I am also facing a similar issue. I have a multiconsumer queue. The message has been dequeued but the message is still present in the queue table and the message is also present in AQ$<queue_name> and the state is being shown as 'processed'.
This all was working fine few days back and somehow stopped working all of sudden. The DB version which I am using is - 11.1.0.7.0. Any help related to this will be greatly appreciated
-AA

External Presenter removed from meeting after 1 hour of presenting

Similar Messages

Maybe you are looking for