External Programs not working

When I click on "Edit Original" or "Edit with" nothing happens. This has only been happening since I went from a Windows XP to a Windows 7 computer at work. IT can't figure out what is set wrong. Any ideas?

This was a clean install of CS6 (monthly cloud version) on a brand new machine. Our IT department sets up machines with a lot of restrictions, and we're an XP environment other than this machine, so we've already found one or two settings for Win7 that had to be changed. IT guy and I suspect this is another one of those, but have no idea where to look. I tried replacing the prefs, and that made no difference.

Similar Messages

External program not available

Hallo,
I cannot send a photo in Lightroom 4 to an external program as Photoshop Elements for example. I've tried the menu and cmd-alt-E, nothing works. What is wrong what can I do?
Thank you for any help.
Peter

Re: External program not available
created by c.frans w in Photoshop Lightroom - View the full discussion
Can you make a screenshot of Preferences/External Editing ?
Frans
Here is it! Thank you for looking at it!
Peter

My macbook pro external speaker not working! help please

My macbook pro external speaker not working! help please

1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
     Pllug in the speakers.
     Do they show up?
     Make sure that Mute is not enabled.
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

'Program not working' - panorama

When I attempt to create a panorama using Photoshop Elements 9 on my recently purchased Windows 8.1 pc I get a message saying 'Program not Working' and I have to close the editor. This function was ok on my old Windows XP pc. Can anyone help?

First, quit the editor, then restart it while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do. Note that if you have set the welcome screen to automatically open the editor, it won't work from that shortcut. Use the actual .exe/application file or the buttons in the organizer or on the welcome screen.

My adobe is not working with Windows 7 it says "program not working"

My adobe does not worked with I have tried 9 & 10 both versions. It does not seem to work with Windows 7.

Adobe Reader X works very well on Windows 7.
Please give us the exact error message you're getting; "program not working" is not a message that Windows or Adobe Reader would issue.

Java program not working using newer version of scheduler (AutoSys)

A little background: I'm in the middle of trying to upgrade our AutoSys server (scheduler) to the latest version (version R4 to R11) and have to do regression testing to ensure our jobs will work in the new version. There's a small java program that is not working supposedly due to the following error:
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: com/f1j/swing/common/JDKAdapter
at com.f1j.swing.common.Adapter.<clinit>(Adapter.java:86)
at com.f1j.swing.engine.ss.JBook.<init>(JBook.java:3032)
at com.f1j.swing.engine.ss.JBook.<init>(JBook.java:3096)
at com.test.Foo.performScan(Foo.java:122)
So in the old version (R4), it runs fine. In R11, I get the exception above. The CLASSPATH matches and I've verified that by echoing it in the shell script that calls the java program. Here's how it's called in the shell script.
echo $CLASSPATH
${JAVA_HOME}/bin/java com.test.Foo
So the Foo class was written by me, which makes use of this external library called f1j11swing.jar (for spreadsheet creation).
The source of the error is from this line in Foo (line 122):
book = new com.f1j.swing.engine.ss.JBook();
The funny part is JDKAdapter (the missing class) is in the same jar file as JBook, so it definitely finds the library in the classpath. But for some reason, this new AutoSys version is spitting out this error. I've exhausted many approaches to resolving this, but I'm still stuck.
Here's the layout of how things are called (should be same for R4 and R11):
1. AutoSys server logs into client machine XYZ as user arnold
2. arnold (AutoSys client) on XYZ executes shell script to call java program
The only significant difference I see is that the AutoSys server in R4 is HP while the R11 server is Sun. However, it shouldn't matter because the client server they're logging into to execute the script is the same linux server.
Does anyone have any ideas? I've already started dialogue with the vendor and it seems kind of in limbo at the moment. Please let me know if you need more info. Thanks.

Hi DrClap,
I just checked jre/lib/ext of my $JAVA_HOME and verified that there doesn't exist any library with a class named "Adapter." We don't put anything in this directory other than what came with the original installation. I've tried isolating the jars before as well, by doing something like (to no avail):
java -cp /users/test/lib/f1j11swing.jar:/users/test/lib/Foo.jar com.test.Foo
If I remove the f1jswing11.jar path in the above command, it will complain about other things. Also, for fun, I tried dropping f1j11swing.jar into the ext folder and removing it from the CLASSPATH and it yielded the original error. Running it directly from the shell and old version of autosys works fine.
I hope I understood your suggestion correctly and please let me know if you have any other ideas. I'm surprised why java would act differently with a different version of an AutoSys client logging into the same machine and environment. Thanks.
xiarce - I haven't heard anything regarding this, but I'll bring it up. Thanks.
Edited by: user4170063 on Apr 13, 2011 2:25 PM

Urgent! External Displays not working due to "USB Devices Disabled"

I use a Matrox DualHead2Go ME for two external displays. Suddenly, I got a message: "USB Devices Disabled... Unplug the device using too much power to re-enable device." Though the DualHead2Go (DH2G) works, it stops functioning seconds later. I tried resetting PRAM and SMC. The ports are fine as I can use them for other devices. If I unplug the DH2G and re-plug, my external monitors work for a few seconds, then the DH2G shuts off per internal light winking out.
I don't think this is a problem w/my DH2G so much as my macbook pro early 2011. I don't know if there is a connection, but this all seemed have happened suddenly when I fidgeted with iTunes and my iPhone 4S. I really need my external monitors for work. HELP!
I also run a lot of programs, but I've been doing this forever and I've never had problems w/my two externals usingDH2G for some time now. I have 16gigs, external HD, 500gig HD. Thank you to anyone who can help. Figures Matrox is closed on the weekends.

It's working. I have no idea why, but I'm not complaining.
Thanks,
John

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

External Display not working (descriptive details in post)

Hello
Background:
I have been using a black Macbook (last year's model - before the aluminum ones came out) and connecting it to a VIZIO VW22L HDTV10T (television/monitor) via a mini-DVI to VGA adapter.
This setup always worked, although it was a bit finicky (I'd have to plug it in before closing the display to get in to work in clamshell mode, for example). I get the feeling from reading other forum posts that this is the normal case, though (which so far has been my only real gripe with OS X).
Anyway, back a couple months ago I wondered if this finicky-ness was partially caused by a messed-up preference file, so I decided to try and fix this. In the ensuing tweaking, I somehow caused my Display preferences to disappear.
After much effort trying to fix the problem, I eventually called Apple support, which ultimately recommended that I reinstall OS X. I didn't do that, and continued to work at the problem. I eventually was able to bring it back by going into my Time Machine backups and restoring all the Display preference files (I used old preferences from back when I got the external HD, so I knew they'd be "uncorrupted). However, now I'm having problems with my external display, namely that it is not working.
This problem started early this year, so it might have been caused by the 10.5.5 update, but since I had all these other problems going on, I'm not sure if that was the case.
Problem:
The Macbook doesn't seem to recognize the display, or is having problems routing video to the display, or something.
If I plug the display into the Macbook while it is running normally, the Macbook LCD will flash blue (like it picked up a new display), but them come back to normal. The monitor will go out of sleep mode for a second, but then display a "No signal" message. If I attempt to "Detect Displays" the Macbook screen will either flash blue (as before) or just do nothing.
If I have the display plugged in when I start up the Macbook, everything will proceed as normal until the time the desktop would be displayed. Instead of this, I just see a blue screen (like some generic desktop before any background is applied). The menu bar, the dock, and icons do not show up. However, I can hear various audio cues telling me the computer is running fine except for htis problem (email notifier going off, etc.).
I know the problem is not faulty hardware, because when I boot my Macbook into Windows, everything works perfectly. It therefore follows that it is an OS X problem. I downloaded both Cocktail and Applejack and run various repairs on them (most notable repairing preferences), but nothing has changed.
Any suggestions about how to try fixing this? If there's any technical detail I've missed, let me know.
Thank you in advance to everyone who tries to help.
-Richard

I have same problem. MacBook Pro (new, 2014) upgraded to Yosemite. Had been running with ViewPoint high-resolution, 27" monitor, HDMI. I tried Thunderbolt connection -- it connected, but it would not allow the external monitor to run at its native resolution (2560x1440). It would only display properly using HDMI. Just 3 days ago after I installed the latest OSx software update, and my external monitor problems started. On startup, my MacBook screen flickers non-stop. I can fix problem eventually (after several tries) by disconnecting the HDMI cable, turning OFF the external monitor power, turning external monitor back ON and then plugging in the HDMI to my MacBook Pro. This is very inconvenient.
I will try using the Thunderbolt cable. When I tried it in the past, it connected, but it wouldn't display the native resolution of my external monitor (which is 2560x1440). Can only get this resolution now with HDMI.

PL/SQL program not working when connect database via SqlNet

Hi,
This is a segment of a PL/SQL program before opening a cursor using input descriptor. It is working fine ( to get the value of unOutputCount ) without connect to a database via SqlNet, can anyone tell me why it is not working ( unOutputCount return 0)while connecting to a database via SqlNet and how to make it work without opening a cursor before DESCRIBE OUTPUT ...?
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'input_111'
WITH MAX 100;
EXEC SQL ALLOCATE DESCRIPTOR GLOBAL 'output_111'
WITH MAX 100;
EXEC SQL PREPARE STMT1 FROM :psSqlStatement;
EXEC SQL DECLARE CURSOR1 CURSOR FOR STMT1;
EXEC SQL DESCRIBE INPUT STMT1
USING DESCRIPTOR GLOBAL 'input_111';
/* Get count of input parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'input_111' :unInputCount = COUNT;
EXEC SQL DESCRIBE OUTPUT STMT1
USING DESCRIPTOR GLOBAL 'output_111';
/* Get count of output parameters in statement */
EXEC SQL GET DESCRIPTOR GLOBAL 'output_111'
:unOutputCount = COUNT;

Hi,
Welcome to Oracle OTN Forums!
I changed your code a little. I think this help you
CREATE OR REPLACE
PROCEDURE xx_test
IS
v_pid VARCHAR2(100);
v_cn VARCHAR2(100);
v_id VARCHAR2(1000);
v_val VARCHAR2(1000);
CURSOR C1
IS
    (SELECT product_id, 'PRODUCT_ID' cn
        FROM product1 );
BEGIN
    FOR V1 IN C1
    LOOP
      FETCH C1 INTO v_pid, v_cn;
      dbms_output.put_line('==== '||v_pid||'==== '||v_cn);
      EXECUTE IMMEDIATE
      'SELECT product_id, DECODE(COUNT (product_id),1,MAX (product_id))||'''||V_CN||''' as val
        FROM product1
       WHERE product_id =:a
       GROUP BY product_id)' INTO v_id, v_val USING v_pid;
      dbms_output.put_line('==== '||v_id||'==== '||v_val);
      EXECUTE IMMEDIATE 'UPDATE product2 SET '||v_cn||' = ' ||''''|| v_val ||''''|| ' WHERE product_id = :b' USING v_pid;
      dbms_output.put_line('++++ '||v_cn||'++++ '||v_val||'++++ '||v_pid);
    END LOOP;
END xx_test;

Mail program not working since upgrading to Leopard 10.5.6

We have loaded the new Leopard system now twice, and both times the Mail program fails to launch from the taskbar, but stays open in the background. The program will not close, and fails to open to even try to check email. It seems other programs are working just fine, but nothing right with Mail. Anyone know if there is a fix to this?
Thanks,
lldowney

Hello, and welcome to the Discussions.
While the other poster's cited article references certain issues with 10.5.6, they are when updating a system that was already on Leopard. If, as it appears, you were Upgrading an earlier version of OSX, such as 10.4.11, then the relevant article is:
http://support.apple.com/kb/TS2537
Where an even earlier OSX than Tiger once generated the Mail folder, two other MessageSorting files will need to be removed, also.
Ernie

External drive not working on iMac, but works on Macbook Pro

I have read a few different threads relating to this question, with no real luck of a permanent solution.
I have an external drive that works perfectly on my Macbook Pro. My new iMac will not show the drive though (both with the current software).
The drive itself shows a power light and appears to be running/powered by the USB port.
I have tried several ports.
It does not show in Disk Utility.
The option in settings is set to show the drive in finder and on the desktop (I have checked this).
I have tried restarting the iMac.
I have also had this problem after the iMac has been turned off overnight, and turned on in the morning (and then plugging the drive in after powering on).
I resolved this issue once by turning off the iMac, removing the power cord for a few minutes, and powering it up again.
I don't think it should be something I have to do every time I would like to use the drive though - It would be very irritating if I had to do that every time.
Any advice or options here?
The iMac has only been used since Christmas day, 2014 - and has had this problem since that day (in which i solved it by the turn off/unplug thing).
Sorry, I am aware this question has been asked a lot. I haven't come across anything that is giving me a long-term solution to this problem.
Happy new year!

Some USB-powered drives are just crappy. They require too much current from the USB and cause the bus to fail or the bus can't provide enough power for it to fully spin up. You can often hear or feel them clicking periodically (like once a second) as they are trying to spin up.
If this is the case, a powered Hub, external power supply, or Y-cable will be necessary to consistently use the drive.

External Monitor Not Working With Macbook Pro

My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
I need to get this problem fixed ASAP, any help is appreciated.
Kind Regards,
Sergee237

I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

Macbook air stuck in No bootable device, external keyboard not working.

Hello.
Yesterday tried to install Windows 7 via Bootcamp. As everyone else got to "No bootable device - insert boot disk and press any key."
After few seconds I realized that keyboard is not working. Googled it and found out that I need to buy an external keyboard.So I did.
Guess what,external keyboard is not working too. Tryed with different PC, it worked with them.
So what now?

The Formatted test drive did not have Any OS on it. I just thought that since that was how I installed it originally, that it would work.
I put in SSD straight out of package, connected Firewire drive with SnowLeopard install, and it booted to it and asked me for to install to which drive, I choose SSD and it took off..
So what your saying is, do the same thing but hang SSD from broken Mini onto working Mini and boot up with same Firewire drive, and have it install OS back onto Broken SSD drive.
Assuming all of this works correctly, why would plugging it back into broken Mini work? Wont the Broken Mini still be looking for BootCamp to finish what it started? (just seems that way from what I've experienced so far)

Program not working ib background

Moderator message: background/foreground/GUI problems = FAQ, please search before posting.
Hi All,
I have a program which is not working in background.It actuly takes the file and using GUI_upload i upload it into ITAb and then modify the database table based on this. But when i process this in foreground it working and updating the table.But when i scedule in background the job is getting over in 1-2 sec and not updating the table.
Please help me. below is the code for your refrence:
data:begin of i_tab occurs 0,
      Bp1 like DATAbase table,
      Bp2 like database table,
     trf1 type string,
     trf2 type string,
     status type string,
end of i_tab.
data: BP_ver type STANDARD TABLE OF DATAbase table      with header line ,
      w_ver type ZVERS_BUT050_CUR .
DATA: it_tab type filetable,
    gd_subrc TYPE i,
    file_name TYPE string,
    path TYPE string.
DATA : lw_file TYPE file_table.
DATA: LIN TYPE I.
*Input File
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR: file_name.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select only Text File'
      default_filename = '*.txt'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
READ TABLE it_tab INTO lw_file INDEX 1.
file_name = lw_file.
p_file = file_name.
START-OF-SELECTION.
*Upload the file
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = FILE_NAME
     FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
    TABLES
      DATA_TAB                    = i_tab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at i_tab.
    if i_tab-status = 'Yes'.
      i_tab-status = 'V'.
    else.
      i_tab-status = 'I'.
    endif.
    modify i_tab.
endloop.
if i_tab is not INITIAL.
    select * from DATAbase table into CORRESPONDING FIELDS OF TABLE BP_ver FOR ALL ENTRIES IN i_tab
      where PARTNER1 = i_tab-Bp1 and PARTNER2 = i_tab-bp2 .
endif.
*Update the table
loop at BP_ver .
    clear i_tab.
    read TABLE i_tab with key bp1 = BP_ver-PARTNER1 bp2 = BP_ver-PARTNER2 .
   if i_tab-bp1 = w_ver-PARTNER1 and i_tab-bp2 = w_ver-PARTNER2.
    BP_ver-PARTNER1 = i_tab-bp1 .
    BP_ver-PARTNER2 = i_tab-bp2 .
    BP_ver-Z_CURRENTLY_VALI = i_tab-status .
    modify BP_ver TRANSPORTING Z_CURRENTLY_VALI .
   endif.
endloop.
update DATAbase table from table bp_ver[] .
if sy-SUBRC eq 0.
    commit work.
    message 'Table DATAbase table Updated Sucsussfully' type 'S'.
else.
    message 'Table Not Updated !!! Check the file data or input' type 'S'.
endif.
Edited by: Thomas Zloch on Nov 12, 2010 11:03 AM

Hi,
     Look at the coding in FM GUI_UPLOAD ... This does not work in background ....
Batch mode is not supported
IF sy-batch = 'X'.
    MESSAGE ID 'FES' TYPE 'E' NUMBER '002' RAISING NO_BATCH.
ENDIF.
Regards,
Srini.

External Programs not working

Similar Messages

Maybe you are looking for