External SATA USB drive not playing fair...

I have a 1TB Samsung SATA drive, that was installed in my PC. The PC is going, and I've now put the SATA into an external USB enclosure. Everything was installed, wired up, connected and plugged in. The drive was found OK.
It showed up as a removable drive, with the safe to remove icon in systray, and appeared in explorer. I was able to access it, no problems. It's partitioned into three drives, and I copied data from two of the partitions onto a NAS drive. However,
after powering down the laptop and the drive I can no longer get it to be recognised in Vista.
The lights come on on the front of the drive enclosure, so there's power getting to it. But, it doesn't show up.
It doesn't show up in the 'Disk drives' section of Device Manager. I can't see it anywhere else in device manager. I can't see it in explorer. As far as I know, from what Vista is telling me...it doesn't exist. However, I'm sitting
looking at the drive just now. It's connected and plugged in. But nothing.
So, has anyone any ideas why this is happening? What can I do to get the drive to show? Where should I be looking?

You may want to reach out to a data recovery service/company. Expect to spend few hundred bucks
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Similar Messages

How do I convert the MP4 files in itunes back to MP3 files so they can be downloaded on a usb drive to play on a CD player?

I am not a computer genius. Somehow, my Itunes files are now in MP4 format. How do I convert the whole library back to MP3 so I can download on a usb drive to play on the CD player? Help!!!

iTunes: How to convert a song to a different file format - http://support.apple.com/kb/HT1550 - including information about different formats and discussion about compression.
In iTunes11: File > Create New Version

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

When i connect my ipod to my macbook it shows up as a usb drive not in itunes

When i connect my ipod to my macbook it shows up as a usb drive not in itunes. I have latest MAC OS updates 10.7.5. Latest itunes. Also at some point it must have worked because my music library is on the ipod.
Help!!

Disabling disk use MAY work... my Mac OS X is not that new so I really don't know. Go in itunes on the ipod summary page and go to the check boxes to do that. ??? good luck

Iomega external USB drive not working

Hello, I have a K8n neo4f board, 1.9 bios, AMD64x2 4400. For some strange reason my external USB drive doesn't work with this setup. I get i/o or insufficient resource errors, and the system will hang. This is puzzling since I have plenty of system resources available (2G ram), and my USB inputs work with other devices. I currently have a dvd drive, ir receiver,memory card adapter, and a cordless mouse receiver plugged in. All of these devices work flawlessly. There is nothing wrong with the external drive, it works with my Dell Inspiron 8200 Laptop. Is this a bios issue, should I upgrade to the latest 1b ? I'm hesitant of doing so, because of the horror stories I've read in this forum of systems becoming unuseable. Maybe someone with a similar problem can help me out.

Are you sure this is not software related .
Ref:
https://iomega-eu-en.custhelp.com/cgi-bin/iomega_eu_en.cfg/php/enduser/std_adp.php?p_faqid=16552&p_sid=7UzKoC4i&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD0xOTgmcF9wcm9kX2x2bDE9MyZwX3Byb2RfbHZsMj0zNSZwX2NhdF9sdmwxPTUwJnBfcGFnZT0x&p_li=

External USB Drive Not Shown in Finder... HELP!!!

After upgraded to the latest OS X Lion, external USB drives plugged to my macbook pro (named A) won't show anything. I've tried cmd+opt+r+p twice but no luck; however, i am able to see it in Disk Ultilities and Storage in About This Mac...
Another same macbook pro of mine (named B) did the upgrade and it is working just fine - external drive is shown as normal whenever plugged.
Help please because my daily work depends largely on document on external usb drive!!!???

I've surfed around already before having my problem posted here because it's so frustrated…
AnaMusic: I've tried that but it isn't worked
Eric Ross: it's checked
LexSchellings: I did run "verify disk" and "repair disk" -> but no luck… My hard drive isn't mounted to Lion as shown in status. Is it something to do with NTFS format? I came across some forum and read that Lion is design to natively support NTFS..
Are there any ways around???

USB drives not mounting after sleep

I've started to experience a frustrating problem whereby any connected USB drive fails to mount after the Mac has been to sleep. Rather alarmingly I get an error message saying "disk not ejected properly"
The set-up I have is two USB drives connected to my early 2011 MacBook Pro via a D-Link mains powered USB hub. I'd planned to have the Mac wake up at 2am for SuperDuper to perform a backup but it's proving impossible as the drive is never available and I have to do a restart before the Mac sees it again.
I've tried a few solutions I've seen online such as installing Jettison (didn't work) and making sure Spotlight isn't indexing the drives (didn't work either).
Can anyone suggest anything else?
THANKS

You can boot OS X from USB2 or FireWire as well as internal drives. There are also two unused SATA ports hidden away inside that OS X can use, but Vista/XP won't see. There is a $24 kit from NewerTech to connect SATA cable, run out PCI slot adapter, and use eSATA shielded cable to a 2-drive enclosure ($67+).
I always boot from an alternate boot drive before ever doing an Mac OS update - repair the drive, do backup, other maintenance. And even sometimes apply the update from there (requires using a standalone downloaded combined update, which is preferred method). Never apply an update w/o a working bootable backup. Something that requires multiple licenses I suspect with XP/Vista.
I have external backup and restore drives for Vista, Mac OS boot drive, 2-drive RAID for Vista, and Vista boot drive.
All of my drives are GUID. Vista is 64-bit, and has some support for EFI (SP1 will bring better support for UEFI).
Disk arbitration has been updated and improved and some products even had to wait for later versions (10.4.8 introduced a number of fixes I understand). I would be more concerned with make of drives and whether they have GUID/GPL or MBR partition tables.

How do I get iTunes songs which were downloaded from external back-up drive to play on new computer and is there a way to get my play lists back?

When I try to play a song from my re-installed iTunes library, I get the error message: "Song xxx could not be played because original file could not be found. Would you like to locate it?" > "Locate" or "Cancel." When I click on "Locate" I can't figure out how to get the song to play from any of the places that were "located." The path is C:\users\Janet\libraries\music\iTunes
However, iTunes songs chosen from my library will play in iTunes (current version) when I have the external back-up drive plugged in! I recently copied my backed-up iTunes library from my external back-up drive to a new computer.
Most of the songs, but not all, magically appear in Windows Media Player and I can play those just fine.
I can see my iTunes library in the newest version of iTunes, recently downloaded to new computer, but can't play songs without connecting to the external back-up drive - so maybe there is something else on that external drive that needs to be on my C: drive?
I am using an HP Pavillion Notebook, Windows 7, 64-bit. My previous computer was Windows Vista. Before Vista, I had XP.
Back when I had XP, I wanted to purchase some songs to download to my computer. Because iTunes had the ability, I used it to create a massive library of songs, most of which were ripped from my CDs. I don't have an iPod and iTunes worked fine for creating playlists and then burning them to CDs.
Also, I'd like to know if there is a way to get back my playlists.
And another thing - in the older version of iTunes, there was a folder in the lists on the left-hand side of the screen where I could click to see all the songs I had purchased. I'd like to get that ability back if possible.
In hindsight, iTunes was probably not the best choice for me to build my music library in a Windows operating system, but it seemed to be the best choice at the time. I really wish I could convert all the songs to mp3 format.
I have been working with computers since the days of DOS, black and white screens, and no mice. The first computer I bought for my own use at home was a Mac and it had "Flying Toasters" as a screensaver. (I miss that screensaver.) It did not have a tower and I believe they called it a laptop, even though the thing was as big as a suitcase and probably weighed around 30 pounds. However, I am by no means a computer expert. In other words, pretend you're trying to tell your mother how to do what I am asking. =)
Many thanks in advance to anyone who can help me.

I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!"

MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue?

Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

How to import m4a files in a USB drive and play them using iTune?

I have set the target directory of iTune to that USB drive, iTune just does not play them. The length of the playing is awful long. But in reality , they are merely 1min long reading when I listen to them using Window Media Player.

CS4 is much older than Windows 8. CS4 is meant to work on XP or Vista. Getting it to run on Windows 7 was a bit of an issue, so I'm pleasantly surprised to hear that you have CS4 running on Windows 8 at all.
It's also possible that a new camera records in a codec that such an old version of AE doesn't understand.
Make sure you're running the latest update to your version of AE. You're on version 9, so make sure you've run the Adobe After Effects CS4 9.0.3 Update (I would not suggest updating in the middle of a project though, as any changes might break AE). I would like to reiterate: you're running a version that was released six years ago on an operating system that was released much more recently. So, be careful how you tread. However, if you're not running 9.0.3, you're missing some bug fix updates that might solve your problem.
I would suggest upgrading to a newer version of AE.
That being said, as Dave mentions, CS4 and earlier had lots of trouble with MPEG-4 and other codecs that used interframe compression. Can you open the files in your version of Premiere? If so, you can use Premiere or the Adobe Media Encoder to convert to a proper intermediate codec. MOV is just a container format. QuickTime with the PNG codec will work in After Effects CS4 with no problems as will the other codecs Dave mentions.

USB Drives not always showing Finder

I currently have two USB Drives connected through a powered hub and they do not always show in the Finder window. Also when I pug in a USB memory stick it does the same thing.
I am new to Mac, I love it but this really bugs me. is there a setting somewhere, what is happening? If I disconnect then re-plug in the memory stick it shows up. What is really funny, that doing this also causes the missing USB drives to show up......

I tried that, but still no go with a thumbdrive. I can go to "Computer", and the USB drive shows up under that. All my other USB external HDs, my iDisk, and even FireWire drives show up on the left pane of the finder, just not the USB stick.
Any ideas?

I cannot mount a external DVD usb drive

Hello,
I am trying to install a extenal DVD usb in a sparc enterprise t5220 with Solaris 10. After connecting the device i got this message:
WARNING: Device /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/cdrom@2/disk@0,0 failed to power up.
WARNING: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/cdrom@2/disk@0,0 (sd3):
Command failed to complete...Device is gone
I rebooted the server and used different ports but i still got the same message several times.
Is there some one that can tell me if this is a hardware problem or is there any procedure to install and/or mount this external device?
Thanks

USB drives can not be used to boot a PowerPC Mac so you will not be able to install new OS X; recover in the event of a major problem or repair the hard disk if it become corrupt to name a few examples if you purchase a USB drive.
Firewire performance on the Mac is also far superior to USB2.0 performance.
mrtotes

USB Drive not mounting on Mac Pro, mounts on other Macs?

Hello.
I have a USB drive that mounts on just about every Mac (just about because I haven't tried on them all) in our studio. Intel & PPC, 10.5.6 and 10.4.11. But, when I try and mount it on my Mac Pro, it won't mount. The only difference (other than it being a Mac Pro) is that it's running 10.5.7 — though, I have an iMac at home running 10.5.7 and it mounts there no problem as well?
I've confirmed the USB ports working (all of them), but for some reason, this drive doesn't mount (can't see it in Disk Utility or other 3rd party drive utilities)?
Anyone have any suggestions?
Regards,
Kristin.

Yea, I've already tried both of those things and neither have worked.
So weird. I've read a lot of reports on these boards about 10.5.7 and USB not playing well together, but the fat that I've been able to get it to mount on a 10.5.7 machine...?
k.

[SOLVED]Mounting usb drives "not authorized" with thunar-volman (XFCE)

Hi,
I'm new to Arch (even though I must be approximately at my 15th try at installing it properly) and I have a problem with thunar-volman.
Whenever I log in as user, and try to mount a usb drive with thunar, let's say I want to plug a drive labeled Ext3_8Go, I get the same message in a pop-up window : "Failed to mount Ext3_8Go (or anything close, not in English in the text), not authorized (that part is in English)"
My install is :
- net install
- partitions : 9Go for /, no swap, no separate /home
- packages : base and base-devel. The only modifications in the package list is that I remove ppp, pcmciautils, and xfsprogs.
- config : at the install stage I only modify rc.conf to change LOCALE and HOSTNAME, and pacman's mirrorlist to allow all French mirrors in addition to the one at the top.
When the usb installation is over, I run this script :
"installation_xfce.sh" (there may be some errors left, I modify this script as I learn) :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon
sed '/^# exec/c\' </etc/skel/.xinitrc >/tmp/.xinitrc
sed '/^# .../c\' </tmp/.xinitrc >/home/$var_username/.xinitrc
cat >> /home/$var_username/.xinitrc << EOF
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
I can mount as a user, no password asked, with :
udisks --mount /dev/sdb2
but the GUI method tells me "not authorized".
"groups user" outputs :
lp wheel games network video audio optical storage power users
the command "ck-list-sessions" outputs :
Session2:
unix-user = '1000'
realname = ''
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ':0.0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.716103Z'
login-session-id = '1'
Session1:
unix-user = '1000'
realname = ''
seat = 'Seat2'
session-type = ''
active = FALSE
x11-display = ':0.0'
x11-display-device = ''
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2011-08-15T08:56:03.573029Z'
login-session-id = '1'
For those who don't have time to read the installation script, DBUS is in the DAEMONS list of rc.conf, and .xinitrc launches : exec ck-launch-session startxfce4
Any idea ?
Last edited by choubbi (2011-08-15 15:05:04)

Thanks a lot !
That worked !
I stumbled across this part of the wiki several times before, but didn't really understand so I had not tried.
If anyone's interested in the script, here's the corrected version :
#!/bin/bash
# expected environment : freshly installed archlinux, login : root.
echo "Are you connected to internet ? If not, please Ctrl+C and reload this script when connected"
echo "Otherwise, press ENTER to continue installation"
read var_dummy
echo "Creation of the user : please type in your user name :"
read var_username
useradd -u 1000 -g users -G audio,lp,storage,optical,video,wheel,games,power,network -d /home/$var_username/ -s /bin/bash -m $var_username
echo "You will now be asked to create the password for this user:"
passwd $var_username
# Add servers for pacman to find packages
cat >> /etc/pacman.conf << EOF
[multilib]
Include = /etc/pacman.d/mirrorlist
[archlinuxfr]
Server = http://repo.archlinux.fr/\$arch
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/\$arch
EOF
# Install packages
pacman -Syyu
pacman -S acpi acpid alsa-oss alsa-plugins alsa-utils catalyst catalyst-utils cpufrequtils cups dbus gstreamer0.10-base-plugins iptables laptop-mode-tools mesa net-tools netcfg ntp pm-utils rfkill rsync sudo ttf-dejavu vim wireless_tools xf86-input-evdev xorg-server xorg-utils xorg-xinit xorg-xinput yaourt conky gamin gnome-icon-theme gnome-keyring gvfs-afc network-manager-applet networkmanager slim slim-themes archlinux-themes-slim hicolor-icon-theme xfce4 xfce4-goodies
# If pacman failed, better stop the script here, and wait for a network connection
if [[ $?!=0 ]]
then
echo : failed to install packages - check your network connection, or review script
exit 1
fi
# Fix sound issue
cat > /home/$var_username/.asoundrc << EOF
pcm.!default{
type hw
card 1
device 0
ctl.!default{
type hw
card 1
device 0
EOF
chown $var_username:users /home/$var_username/.asoundrc
# Configure video settings for X to use Catalyst
if [[ ! -e /etc/X11/xorg.conf.d ]]
then
mkdir /etc/X11/xorg.conf.d
fi
cat > /etc/X11/xorg.conf.d/20-fglrx.conf << EOF
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
EndSection
EOF
sed -e 's/top_left/bottom_right/' -e '/alignment/i\double_buffer yes' -e '/CPU Usage/a\${color lightgrey}Temperatures:' -e '/CPU Usage/a\ CPU:$color ${hwmon 0 temp 1}°C' </etc/conky/conky.conf >/home/$var_username/.conkyrc
chown $var_username:users /home/$var_username/.conkyrc
# Install clickpad support
yaourt -S xf86-input-synaptics-clickpad
# Add french keyboard to X
sed '/MatchIsKeyboard/a\\tOption "XkbLayout" "fr"' </etc/X11/xorg.conf.d/10-evdev.conf >/etc/X11/xorg.conf.d/10-evdev.conf.new
mv -f /etc/X11/xorg.conf.d/10-evdev.conf.new /etc/X11/xorg.conf.d/10-evdev.conf
# Add new daemons, remove old ones, disable hwclock and remove netfs since I don't use it. add it if you need it
sed '/DAEMONS=/c\DAEMONS=(!hwclock dbus syslog-ng networkmanager laptop-mode acpid @alsa @cupsd @cpufrequtils ntpd crond)' </etc/rc.conf >/etc/rc.conf.new
mv -f /etc/rc.conf.new /etc/rc.conf
# Slim login manager ; change theme
mv /usr/share/slim/themes/archlinux-darch-grey /tmp/
mv /usr/share/slim/themes/default /tmp/
rm -r /usr/share/slim/themes/*
mv /tmp/archlinux-darch-grey /usr/share/slim/themes
mv /tmp/default /usr/share/slim/themes
sed '/^current_theme/c\current_theme archlinux-darch-grey' </etc/slim.conf >/etc/slim.conf
# XFCE login, and thunar launched as a daemon (note that the part with 'if [ -d /etc/X11/xinit/xinitrc.d ]" is not present, to avoid mounting problems when logged as regular user)
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc
# Boot to runlevel 5 now, and run slim then
sed -e 's/id:3/#id:3/' -e 's/#id:5/id:5/' -e 's|x:5:respawn:/usr/bin/xdm|#x:5:respawn:/usr/bin/xdm|' -e 's|#x:5:respawn:/usr/bin/slim|x:5:respawn:/usr/bin/slim|' </etc/inittab >/etc/inittab.new
mv -f /etc/inittab.new /etc/inittab
# Add colored prompt to user and root
sed '/^PS1/c\' </etc/skel/.bashrc >/root/.bashrc
cat >> /root/.bashrc << EOF
PS1='\[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;35m\]\w\[\e[m\] \[\e[m\] \[\e[0;32m\]\t -\[\e[m\] \[\e[1;31m\]\$ \[\e[m\] '
EOF
cp /root/.bashrc /home/$var_username/.bashrc
chown $var_username:users /home/$var_username/.bashrc
# How does one do that automatically ?
# Manually add user to sudoers
EDITOR="vim" visudo
# Reboot, because it's quick and I'm too lazy to learn how to start all the daemons and others.
reboot
The important part of the script to solve the problem is :
cat > /home/$var_username/.xinitrc << EOF
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
exec ck-launch-session startxfce4
thunar --daemon &
EOF
chown $var_username:users /home/$var_username/.xinitrc

USB Drive not showing up at all, not appearing in disk utility either

Hi, I am having a problem getting my USB drives to show up at all, namely my iPhone. When I plug my iPhone in, iTunes recongizes it, but I am unable to get it to appear in Finder, Desktop, or Disk Utility. I tried it on a Windows PC and it works perfectly fine. I am also having issues with USB thumb drives. However, my western digital external HD works fine.
Very strange problem, anyone have any solutions?

Now don't do that.
My only other thoughts on this was that there is something wrong with the cable or jack in your macbook. You said the iphone mounted in a windows pc. So it looks like the cable is ok. That may mean the jack has problems. On the other hand you also say plugging in the WD external works through that jack. So the cable and jack look ok. So much for that thought.
I also would suggest a pram reset but I doubt that would have any affect. Or is that why you did when you said you "flashed" pram?

External SATA USB drive not playing fair...

Similar Messages

Maybe you are looking for