EXTERNAL SCREEN ON 8220 PEARL NOT WORKING

Well, I lost my OS in the middle of December. Thanks to everybody's help I managed to get a generic OS reloaded and then I went back to the Blackberry Desktop Manager and reloaded my phone provider's (Orange) specific OS. I've also managed to reinstall my backup data and reloaded various apps. Hooray!
However the external screen is completely blank. The only time that it displays anything is when I turn off the phone and then it briefly displays the "T Mobile" logo. (it was originally a T Mobile phone)
How do I get the external screen to turn back on please?
Thanks,
Simon

Try backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT
Make sure to test for the issue before restoring any data from your backup file. Then do a selective restore as shown here: http://bbry.lv/bhaArf making sure to restore essential data only such as contacts and calendar.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
Thanks

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

External display monitor suddenly is not working; power is on

Hello,
My LG external monitor display suddenly is not working today. It powers on, and it says "analog power saving mode", and it is detected by my ibook G4. When I go to preferences, and show displays, it shows that two displays are active, my laptop "Color LCD" and my external, "L1932Tq". If the external is plugged in, it indicates that that is the system in use, though the external monitor is black and unresponding (except for power light which is on). I replaced all cords - the power cord and the mini VGA cord and it's connecting cord to the monitor, and there are no changes.
Is this monitor just suddenly broken, perhaps through it's internal connection devices??
Thanks!!
alidocs

Dear Shankar,
Issue is solved. It was Program Error from SAP side.
Now All the buttons are working fine and I am able to print PDF also.
Solution is implement the note 2031585 - SAP NWBC ABAP Runtime Patch 40.
System Details : ECC 6.0 NetWeiver 7.4 ,
EHP 7 , SP-Level 06
Thanks a lot for all your suggestions.
Regards,
Namsheed.

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import

I cannot seem to load raw images into LR 2.5. I've been using this for years. I always load from memory card, but it gives me an unknown error message. I tried to load from camera, hard drive, & external drive and still will not work. I checked import menu and nothing has changed. I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card. Any thoughts?

The error message probably said "unsupported or damaged"
The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

My external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working..

my external hard disk ( TRANSCEND ) is not working when i connect to usb..before it was working.

1. These are the iphone forums. So what does your question have to do with iPhones?
2. Contact Transcend for support.

Power /screen lock button does not work

Hello
I've bought an İphone 5 on january 2013 from NY,USA.But it's power/ screen lock butto does not work since last week. Now I'm in Turkey. What can I do for service support?Is it possible to get guarantee benefit in Turkey?I'm so desperate about this issue battery runs out so quickly, unwilling calls...please guide me to solve this problem...

Hi aslsfr,
If you are looking for more information on the service options for your iPhone in Turkey, you may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=Turkey&product=iphone
Regards,
- Brenden

My screen lock password is not working

my screen lock password is not working? please help!

if you can't remember the passcode, there is only one thing you can do. DFU the iPad, restore it and set it up as a new device, you can't restore from backup because the backup will have the passcode in it. You will lose all data on the iPad. If your lucky, there will be a backup from before you put the passcode on it and you won't lose all of your data.

IChat screen sharing and video not working on MacBook but works on Mac pro

I have a MacBook and MacBook pro. Both have the lion os 10.7.2. I can use iChat on the MacBook pro for screen sharing, video chat, and text chatting, with others remote to me. However, I can only do texting with the MacBook. I can do screen sharing via Finder between my MacBook and MacBook pro. I can do FaceTime between both systems. I can also do FaceTime between the MacBook and anyone remotely.
I also tried installing teamviewer on the MacBook, and on a remote MacBook..... And I get the same results where I cannot share the screen, from the one that has not been working.
I have checked the settings under system preference and made sure screen sharing was enabled. I have checked under iChat under video to make sure screen sharing was checked.
The macbook that is having this problem is configured for AIM for iChat
I have run out of ideas. Any suggestions on what I might try?
Thanks

Ok,
I will list the ports in greater detail and point out when iChat uses them.
AIM Login and 1-1 Text Chatting
iChat version 1 through 5 will Log in to the AIM server on port 5190 (TCP Protocol) by default.
Since iChat 2 we have been posting here that the AIM servers allow a Login on almost any port and have been suggesting port 443.
This is used by both Web Browsers for secure Login to some sites and by the Mail app with some mail servers.
It is also below port 1024 (most domestic routers have the ports above this figure closed) In some campus situations using port 443 will normally allow at least Login and Text chatting.
iChat 6 uses port 443 by default.
File Transfers (AIM)
When doing File Transfers with AIM Buddies iChat will move to using Port 5190 on the UDP Protocol.
This cannot be changed. (This invokes the little Message about Starting Direct IM in an open Chat)
It also uses this port for Pics-in-chats, dropping Files on a Buddy's name with out a Chat or sending other files that are not pics.
In the case of Port Forwarding some devices don't like port 5190 being forwarded "twice" which is another reason for moving the login and Text chat port.
Jabber Logins
No matter what Jabber server you use ichat will use one of two ports (5222 and 5223)
Which one it uses is dependent on whether it needs and is using an SSL Login or not.
SSL Logins use port 5223 and NON SSL one use 5222 (ticking or Unticking the SSL box on a Jabber account will automatically change the port).
Google Talk is the exception in that it allow a Login on port 443 as well.
The First Apple Doc I linked you to says iChat uses port 5220 in Jabber.
I run Little Snitch and have never seen any version of iChat use this port at any time.
Bonjour
Any Mac to Mac Connection or Mac to any Bonjour able peripheral will be on port 5353.
This is normally opened (Preset) in the Mac Firewall for the Finder/System side of Sharing.
iChat needs and uses two other ports (5297 UDP and 5298 on both TCP and UDP)
As they an LAN Side connections the router would normally pass them.
At iChat 3 there were issues with the Mac Firewall (it included UDP set up and the preset in the firewall only listed them and TCP so we had people add all the iChat ports (you had to manually enter them in Tiger)
A/V Chats
No matter which Buddy List you start from iChat will do A/V chats the same way.
The Visible Invite you or your Buddy sends is on port 5678 (UDP)
In iChat 3 and earlier iChat then moves to port 5060 to send the SIP Connection Process invite behind the scenes (SIP = Session Initiation Protocol)
Port 5060 is one of 4 ports internationally agreed for SIP (How VoIP phones connect) (5060-5063).
Although ISPs were not supposed to block Through traffic many started blocking End users and then Charging them to open these ports (Many ISP were telecom companies that were losing long distant Telephone calls monies).
The SIP process then in iChat 3 contacts a server run by Apple for this purpose (Snatmap.mac.com to give it it's full name).
This acts like a old fashioned telephone operator connecting the call.
SIP is a text based process.
Your end "Calls" the operator.
The Operator "Calls" Buddy.
Buddy Accepts
iChat then negotiates the ports to be used.
In iChat 2 and 3 it uses 4 ports (vid in Vid out, Audio In and Audio Out) from "the group of 20" starting at the bottom (16384 to 16387 normally)
Three and 4 way chats uses more ports (which is why 20 are set aside)
In iChat 4 Apple realised the issue with the 5060 port and changed the way iChat worked
Since then it has Sent the invite on Port 5678 but then moved to port 16402 (it starts at the top of a smaller group of 20)
All Video and Audio traffic is also now on one port (so no need for 20 ports and iChat now lists 10).
NOTES so Far.
File Sharing during a Chat converts the Chat to Direct IM for AIM Logins
This is Peer-to-Peer in AIM
A/V Chats are Peer-To-Peer and you can actually log out of the Buddy list and continue the chat. (The exception is using iChat 6's AIM Video relay option)
Screen Sharing
Screen Sharing is an Audio Chat with a VNC connection along side.
Both bits have to wok to avoid the Pop-up to send to Apple and the Log that contains.
The Audio part is on port 16402 and the VNC part is random. (So random it is different every time you do it)
The reason it is classed as an Audio Chat+ is so the AppleScript for Auto Accept can filter out Screen Sharing connection and Not Auto Accept them.
This does have a knock on effect as far as your Router is concerned as already mentioned earlier.
You cannot Forward or Trigger the random Port so you have to use UPnP in your router to open the ports.
NOTES
Jabber File sharing may possibly be on port 1080 as listed in the Server Article I linked you to (I have also seen it written about in other stuff I have come across)
However Little Snitch does not seem to confirm this either.
Most time it will be peer-to-peer like the AIM connections for this.
However some Jabber servers do not seem to allow this and have this Jabber65 Proxy set up which passes things Server to Server in between it leaving your end and arriving at a Buddy.
This on Port 7777 but you do not need to open this port (unless you are running a Jabber server)
I have yet to test File Transfers using a Yahoo Buddy List in iChat 6.
AppleCare and Geniuses.
Previously I have been contacted by Geniuses in Stores asking to test customer's iChat.
They and the Applecare people have details about Apple wants an designed the App to work.
What they don't have is the knowledge about what it takes to set it up in the "real world".
There are literally thousands of Makes and Models of routers.
Some like the Thomson-Alcatel brand state they are SIP/VoIP ready but this means the router strips out all SIP Data trying to send it to a Phone.
Early models of Alcatels can get around this with a tweak. Later models can't.
Motorola devices tend not to have UPnP.
Apple Base Stations have Port Mapping Protocol instead of UPnP and this needs setting up.
The Zyxel range definitely does not like the dual use of port 5190 and does much better using UPnP (You almost certainly have to do your AIM login on port 443 with these).
1. I have two computers (MacPro and MacBook Pro) that are both running Lion 10.7.2 and both running iChat 6.0.1. <<-- Fine
2. The Netgear router model is: WNDR3700.    <<<<--- With any Brand there are exceptions and I do wonder about this one
3. The firewall for both Macs is turned on and in the advanced area iChat is listed as being "allowed." <<<<---- Fine
4. In iChat, under the video options, "Screen Sharing Allowed" is checked.                                        <<<<<---- Fine
5. In System Preferences, "Screen Sharing" is checked and this is for "All Users" at present.               <<<<<---- Not Required
6. There are two separate AIM accounts being used for iChat purposes.                                            <<<<<---- OK
7. In iChat preferences, each AIM account is "Enabled" under "Account Information" and the "Server Settings" show the Server as "api.oscar.aol.com" and the Port is "443" and "Use SSL" is checked.                                <<<<---- As it should be
From this and the other info in the first port it was only the router set up that seem to throw some light on a possible cause (Port Forwarding and UPnP conflict)
If just doing Port Forwarding the ports listed would have covered things (Except the Screen Sharing's random port)
Regarding your latest post.
I have table similar to that on my Sagem 2504Fast Modem/router combined device and it too seems to list a different port on the external side on occasions.
I would try the router with the Disable SIP ALG unticked (so it is not disabled). If the Help info on the right gives any info about what this Netgear version does it would be helpful.
Some are like the Thomson-Alcatels I was talking about in that it points the SIP data to a specific place (Possibly a Phone socket on the device)
Others seem to provide an "boost" to enable SIP to work and don't seem to get in the way of iChat.
Try adding the Names in Table 1 from this page and see if you can Video to those.
There are 6 names in total (I am actually only seeing one on Line as I type)
9:19 PM      Wednesday; January 25, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

On screen lock screen, the keyboard does not work, switching to the switch-user screen the keyboard works again

Mac OS-X 10.7.5, Mac Air.
This began about 5 to 7 days ago.
Steps to reproduce:
Step 1:
Close the lid, or the system 'powers down', or goes to the screen saver mode.
Step 2:
Open the lid, press the power button, or what ever to wake up the Mac Air
The "Enter your password" screen is presented.
They keyboard is not responsive, I cannot type anything.
The touch pad works, I can power on/off the machine.
They keyboard is not functional.
Result: I cannot log in again.
Expected behavior: The keyboard should be working I should be able to unlock the screen.
Workarounds:
Then click on my name, or any other user of the machine and it works fine.
I can now unlock the screen and return to where I was.
Expected behavior:
I should not have to go to the "Switch User Screen" to log back in.

More detail: Some keys on the keyboard do work, ie: caps lock toggles the led, and the function keys across the top seem to work {that is I can adjust brightness, and so forth}
the letter and numbers, and perhap others do not work.

Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

Hi,
I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
Thank you in advance for any help,
Łukasz
Solved!
Go to Solution.

Hi Lukasz,
Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

IPad touch-screen sensor the does not work on one part of displey

I have problem with a part of the screen on my iPad. It seems like the sensor on the screen does not work. When draging items or webpages through that section, the dragging stops. It looks like the screen is not detecting my fingers on that part. Part of the screen that is not working is about 1 cm wide. iPad is 1 month old.
Message was edited by: micronola

Had the same issue with a 1cm strip from top to bottom (portrait) not responding. I did a backup, a complete factory reset, and then a restore of the backup. So far it seems to be working again!!

Question: How to connect my iPad with iTunes since it show that in iPad screen while it is not working?

My iPad not working and show message in the screen to connect to iTunes, So how i can connect to iTunes while it is not working is through my computer and do i need to download iTunes first?
Thank you

When your iPad wants to be connected to a computer with itunes, yes itunes need to be on the computer. Click here to Down Load iTunes.

Screen sharing and vnc not working

OSX Lion Screen Sharing
I was using screen sharing on OSX Leopard using VNC Viewer. Even after upgrading to OSX Lion this worked ok. But then the other day there was an update to screen sharing which I applied. This first, switced screen sharing off, so I have switched it back on.
However now my VNC client no longer works with Screen Sharing. I get the new login screen but at that point all keyboard and mouse input is ignored and is therefore unusable.
This was working ok before the screen sharing update.
Anyone else had this issue?

Thanks but that is talking about using VNC on a Mac rather than connecting to a Mac with a VNC, my VNC client is running on windows. Also, since my original post, TightVNC has also experienced the same issues with OSX Lions Screen Sharing so its not just a RealVNC issue.
I did manage to connect once, just after rebooting OSX and that session worked fine, subsequent sessions exhibited the same issue though.

I have a new mac book pro (sept 2014) and am suddenly stuck on the log-in screen. Keyboard input not working to enter my password. Already tried a basic restart and a cmmnd/ cntrl/ pwr troubleshoot to no effect.

I have a new mac book pro (sept 2014) and am suddenly stuck on the log-in screen. Keyboard input is not working to enter my password. Seems to be a log in issue as keyboard works for forced troubleshooting. (And b/c when I first noticed the problem, I was able to enter my log in password but then everything sort of froze. Now, no ability to enter the password.) Already tried a basic restart and a cmmnd/ cntrl/ pwr troubleshoot to no effect.

Reset PRAM: http://support.apple.com/kb/PH14222
Start up in Safe Mode.
http://support.apple.com/kb/ph14204
A new Mac is in warranty for 1 year from the date of purchase.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare or take it to the Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best.

EXTERNAL SCREEN ON 8220 PEARL NOT WORKING

Similar Messages

Maybe you are looking for