External Service Mangement Service Pricing Procedure not picking up in PO

Hi ,
We have an issue with External Services pricing procedure:
In SPRO->MM->External services Management->Maintain Conditions for Service
Have defined and assigned Schema for Services , but when I make a PO entry the pricing procedure is not picked.
I have maintined condition types , and defined schema procedure for services and there after have assigned service pricing procedure to document type for PO.
I get a message 'Conditions for service price determination incomplete'. And the conditions which are populated are from a different pricing procedure.
Please help me sort the issue.
Thanks

Hi,
This error triggers in case of own pricing procedure or changes to standard pricing procedure. Other reasons could be the price calculation schema is not set up for External Services Management or calculation schema not adopted from client 0 when system configured. Please refer following notes. Thanking you.
SAP Note No. 25357 MM-SRV: Error in the case of service conditions
SAP Note No. 27024 MM-SRV: Setting up components (services)

Similar Messages

Pricing procedure not determind

Hi Gurus,
I was creating a Sales order but i cannont save the sales order and getting a error message as
Pricing procedure not determined.
Please help.
Thanks,
Dardo

Hi Dardo
Check in OVAZ wheather the sales document type is assigned to the sales area or not . But , after creation of sales order if you are getting this error Pricing procedure not determined. then go to OVKK and maintain the data sales area + Cupp + Dupp =Pricing procedure and then check, if you are still getting error then maintain sales area + Cupp + - = Pricing procedure
Regards
Srinath

Service entry sheet:Pricing condition not showing

Hello Experts,
Greetings.
My issue is while printing the SAA (Service entry sheet) it does not show other values (i.e VAT AMOUNT,ADDITIONAL COST) which we have entred during time of purchase order creation.It shows only basic-gross price only.
Can anybody please advice what could be the problem.We want every condition to shown in SAA print out.
Any help would be highly appriciated.
Best Rgds
Nitin

Thanks for your reply.I have ticked against the country code by going through transection OLMSRV.But what happenes is that while making any new SPO(Service Purchase Order) it does not catch the vat element.
Actually what the problem is that while making any service entry sheet sometimes we do require to add vat for some specified services and we need to add some additional cost too.Now while making the saa it does not show either vat or additional cost on SAA.
As a result while parking invoice through MIR7,the additional cost which we have entered in PO does not reflect in invoice resulting less payment to vendor.
Please suggest how to overcome with this issue.
Thanks & Best Rgds
Nitin

Pricing procedure not getting determined in sales order

Hi All
I have did all the configuration settings for determining the pricing procedure in the sales order,but it is not getting in the order.
The assignment sales area + customer pricing procedure + document pricing procedure are fine
And in the customer master the customer pricing procedure is maintained properly
And in document type TA,the document pricing procedure is maintained properly.
Without IPC is it not possible to get the prcing procedure of CRM in to the sales transaction.
I dont have IPC installed on my system.
Appreciate ur help
Regards
Sreekar M

Thanks Shalini for the information
Then i think i cant create a billing document in CRM with reference to sales order...as the sales order is incomplete
Is creation of delivery possible in CRM?
Regards
Sreekar M

Pricing procedure not showing up in Inquiry

Hi All,
I have developed a very simple pricing procedure for inquiry. It has only one condition type i.e. PR00. I just want to enter price to update the value of inquiry on saving. It works fine if i mention material ode in inquiry, but if i do not mention material code and enter qunatity with some description, then the condtion type PR00 does not show up in the conditions TAB. How can i record my inquiry with quantity and amount for text items.
SAPXPT

I suggest you ask this question in an SD forum, this here is about technical questions running a SAP system on SQL Server.
Markus

Pricing procedure not to bill customer but revenue recognition

I'm looking for guidance on how to setup a pricing procedure conditions. First let me explain the situation. What happens is the customer buys say 2000 software licenses on a sales order. The customer is billed and the customer account is debited and a deferred account is credited. Now the customer activates one of the licenses. The pricing from the sales order is copied to a contract. This contract has a start and end date for the license. Now that license can start to be recognized based on the period of the line item contract dates.. The issue we have is that normally for deferred revenue billing takes places. Problem is customer was already billing on the sales order. Somehow the pricing procure has to credit the deferred account that was posted on the sales order and then credit the revenue recognition account that can be used by transaction VF44.
So on the invoice associated with the sales order Invoice from sales order
Dr Customer $1000
Cr 2370 $1000
The account 2370 is the deferred account. This part is fine.
Now we activate 1 of the licenses.
So the pricing procedure has to do the following with no billing to the custo0mer account Invoice from contract
Dr 2370 $120
Cr 2371 $120
This is the problem part. crediting the deferred account 2370 and then posting into the revenue recognition account 2371
Rev Rec – VF44 for Period1
Dr 2371 $10 Cr 4340 $10 Any ideas would be appreciated

Hi
In SD billing documents customer is always debited or credited based on nature of transaction. For posting in two different G/Ls instead of customer account there is only one possible way which I know. In free goods pricing system can post debit and credit entries to different G/Ls and these G/Ls are controlled through account keys which you assign to condition types in pricing procedure.
Do you have any Idea of free goods pricing and its posting? Explore this and give it a try. I am not sure about this because I didn't test this. You can test and see if it helps.
In this for contract item category you have to use free goods pricing which you set in item category settings in VOV7.
Thank$

Pricing Condition not picking from Info record

Dear Sapians
We have made all the Changes for Higher Education Cess. Now while creating PO some conditions are not picking from info record(only for some materials). In Dev. server Everything working fine.
What could be the problem?
Warm Regards
Sukumaran.E

Hi Sukumaran,
You need to go to PO -> item conditions -> press analysis button.
double click on the pricing condition on left hand side screen. You will get proper analysis. Like "PBXX 111 Condition ignored (requirement 005 not fulfilled)"
These descriptions will give clear hint on the reason of price not being picked up.
- Sanjeev

Wrong Pricing Procedure getting picked up in Value Contract

While creating Value Contract, when we maintain conditions, the condition type which we want to maintain are missing.
During a year, PO is made a for a value of around 15 crores. So we need to make contract which will pick up the same pricing procedure which is picked up for all those PO's. The pricing procedure was specially created for these PO's.
Now while we create contract it should pick up that same pricing procedure which it picks up in the PO.
The vendor, material & Purchase Org is same in our contract as it is there in the PO.
So I feel when we create a contract it should pick the same pricing procedure as it does for PO's, but our contract picks some other pricing procedure.
what is the configuration to be done specially for Value contract.
Regards,
Karthik

Hi,
The pricing procedure is determined differenetly for contract & PO .
For PO, pricing procedure is determined by the Vendor Schema Group and Purchase Org Schema Group.
But in case of Contract the pricing procedure is based on condition supplements of condition type PB00.
Condition type PB00 is considered as master condition type in case of Pricing procedure of contract.
In std SAP contract system picks up RM0001or RM1001 because these pricing procedures are maintained in the Condition Supplements of PB00.
If you want to have pricing procedure other than RM0001 or RM1001 then you need to maintain that pricing procedure in the Condition Supplement of condition type PB00.
Regards

Pricing procedure not determined

HI
When i tried to create sales order with sales area lg11/lg/lg.I am getting the error that pricing procedure is not determined,because no entry with keys lg11/lg/lg 'a' 'v' exists in table 683v.
I am not able to move further. Can u pls help me.
Thanks&Regards
Prasad.G

Hi,
This is nothing but the problem in pricing determination.
Go to OVKK.
And maintain the required entries for your sales organisation, distribution channel, division, customer pricing procedure , document pricing procedure and the required pricing procedure that you want to get triggered when once enter this sales area with the other combinations.
Customer pricing procedure comes from customer master data .(sales area data sales tab) and document pricing procedure comes fromthe controls of order document(VOV8)
Mohan
Award points if it adds information.

Invoice pricing procedure not using alt calc type from the pricing procedur

The sales order has the same pricing procedure as the invoice but when the invoice is created it is not using the alt calc type that is on the pricing procured like it is on the sales order. This is causing one of the condition types to have different values on the sales order vs. invoice.
I am not sure what other areas to check to see why this is happening. Any thoughts?

I have checked and in the copy controls for Delv type = LF and target Bill type = F2 the Pricing Type = G (copy pricing elements unchanged and redetermine taxes). Condition types such as ZPR2 where there is condition record copy in correctly to the invoice. It is condition type ZZIF where it is determined from a routine, not a condition record, where I am having this issue.
Is there another place in config that I should be making a setting so that condition types determined by routines are copied to the invoice without being redetermined at invoice create?

Standard Pricing Procedures not found

Hi Experts,
We have been migrating from ECC4.5 to ECC6.0, Now when i check the Standard Pricing Procedures in SPRO settings in Define Calculation Schema, I am not finding Lot of the default Standard Pricing Procedures which Usually appear in ECC6 of Fresh Installation. Could any one help me is there any Patches or Notes to be applied on that.
Advice your valuable inputs.
Best Regards
Javeed

i think you have to import from the client 000 or 001.
ask your basic consultant to create a user in this client and go to this client ,m/08 ,select the procedures and control data ,create Transport request via menu bar table view -- Transport and save . after that select all the condition types in that procedure and at the top you can see * include in the transport * ,include all selected entries and save .repeat for all the procedures.
goto your actual development client import it via SCC1 transaction
Same way you have to import all the condition types also in M/06

Pricing procedure not completed

Hi genius,
In sales & distribution i am entering new person. The pricing procedure should not be completed.for creation of Inquiry.
send the Correct Answers .
Regards,
A.sithanandan

Hi,
You can maintain your pricing condition Like price/Tax/ Dismounts as mandatory in pricing procedure. This will not allow you to save the document till all pricing details are entered.
Also you can use Incompletion procedure.
regards,
Siraj

SRV: pricing condition not picked up in service confirmation

Hi gurus,
We maintained the service scenario with R/3 billing, and using service contracts. When we enter a service order,
the contract is determined, and discounts (on spare parts) are taken into the pricing. When copying the item
to the confirmation, the discount is copied as well. So far everything works as desired.
However, when entering a spare part directly into the confirmation, the discount is not taken into pricing. Contract determination works fine. So the contract is determined, but the discount is not found.
Please help us solving this matter.
regards,
Wim Olieman

Hi,
Please check the Copy conditions tick in the SPRO path for Copy control for item categories between the contract item and the confirmation item for spare parts.
Regards,
PP

Update Pricing is not picking the latest price!.

We have a pricing type ""X" Copy manual pricing,frieght,upcharge and Redetermine Others.User is expected to get the latest price using this option ?.
when tried to use this X , system does not get the latest price but it is picking from the sale order.What is the difference between X and C copy manual pricing element and redetermine others.If we use c it is picking the latest price.
Thanks for your support!.
Bless

Hi,
It lokks like that, you have used your own pricing type 'x'. wherein you coded based on your requirement. please check that type for your coding.
Whereas C is the std one, it will do redetermine. hence the new price will come.
Check with the help of your abaper in finding the code on 'x'
Rgds
Rheya

Pricing procedure in service PO

dear all,
i have created a service PO using pricing procedure zlocal where as when i created service entry sheet i saw another pricing procedure MS0000 PERFORMANCE PROCEDURE which is picked by the system automatically. i dint saw this procedure MS0000 in m/08. can anybody tell me pls where this MS0000 pri pro might be defined and assigned or at least how to get my own pri pro zlocal in the service entry sheet.
thanking you
ujwal

Hi,
you can only maintain variable calculation schema fro the documents Request for Quotation
Purchase Requisition, Purchase Order and Contract within the customizing of services conditions.
I could not see a possibility to maintain an extra pricing schema for entry sheets. The same schema is used in the entry sheets as in the reference document was used.
You can assign to your purchasing documents your own pricing schema in customizing of External Services Management -> Maintain Conditions for Services -> Variable Calculation Schema for Services -> assign it for document category and type.
Regards,
Edit

External Service Mangement Service Pricing Procedure not picking up in PO

Similar Messages

Maybe you are looking for