External service operation with PO associated with it.

hi Gurus,
If a PR - PO is created with reference to external service operation of a maintenance order, then do system allow to delete this operation ? Is it standard SAP practice ?
I have observed in our case that, system is allowing external service operation to delete even though a PO is created with reference to the operation.  System only gives a confirmation prompt ( PO is associated with this operation ) , if we select yes then operation gets deleted.
Is it logical when a operation is deleted though a PO is created with ref to it ?
For a non stock item , system does not allow the component to be deleted if a PO is created .
Kindly reply at the earliest.
Thanks
Maneesh

Hi,
In standard :- System does not allow you to delete external operations & components when PO is there ..
I think in ur system for external operation they might have change the error message IW 707  to warning or no message ..
Check this in config under spro >pm>maintenance and service orders -->message control -->Here for IW -707 , make as Cat -E Error message ..
Then try it up
regrds
pushpa

Similar Messages

  • Changing print format for the Shop papers -External service operations

    Hi Friends ,
    We want print outs for the external service operations in our PM orders .
    The standard format available with shop papers is displayed with some extra info .
    We want to remove those info and add some extra info .
    Can we change the printing format for these and how much effort it rquires .
    Regards
    AM

    Hi,
    In OIDF, define the Shop Paper specially designed for External Service Operations.
    In Order, in Print option, go to Operation Selection, select the required operation & select the print layout which is designed for External Service, so that, you can get the print out according to additional fields requirements.
    regards,
    Maheswaran.

  • Ways to configure VISA properties associated with the EOS character in LabVIEW

    I am having a great deal of trouble reading consistently from an instrument (HP5328A Universal Counter) and am investigating the EOS character. In ibic, there are 6 properties of interest accessed through the ibconfig command. The following are the properties and their default settings:
    Board level
    - IbcEOSchar EOS character is 0 (zero)
    - IbcEOSrd EOS is ignored during read operations
    - IbcEOSwrt EOI not asserted when EOS sent
    Device level
    - IbcEOSchar EOS character is 0x0A (set in ibdev)
    - IbcEOSrd EOS ignored during read operations
    - IbcEOSwrt EOS not asserted when EOS sent
    I would like to be able to programmatically set these at the beginning of my LabVIEW
    program. The only relevant VISA properties in the INSTR or GPIB BoardInterface classes I can find are:
    - Send End Enable
    - Suppress End Enable
    - Termination Character
    - Termination Character Enable
    The defaults in my LabVIEW program for both VISA classes mentioned are: Send End Enable is true; Suppress End Enable is false; Termination Character is \10 (Line Feed); and Termination Character Enable is false.
    The only property I change is setting the Termination Character Enable to true for both classes. Is there anything else I can do with properties associated with the EOS char? Is there a property like the IbcEOSwrt that may have a part in generating a service request?
    Just to confirm, the last two bytes of the instrument's ouput are \CR and \LF. I am using \LF as the EOS. Is this correct or should I be incorporating the \CR in the EOS somehow?
    ANY input is appreciated,
    Chris

    Chris:
    VISA "Termination Character" = NI-488 "IbcEOSchar"
    VISA "Termination Character Enable" = NI-488 "IbcEOSrd"
    VISA "Instr" or "GPIB Instr" = NI-488 "Device level"
    VISA "GPIB BoardInterface" = NI-488 "Board level"
    VISA cannot automatically add the termchar to the end of the written data (like IbcEOSwrt).
    Unless you specifically need to do board-level communication, which is considered advanced, I suggest ignoring that, and sticking to the device-level calls.
    If the instrument's ASCII data responses always end in \LF, then yes, just using \LF as the termchar is the correct thing. In fact, with most 488.2 devices you don't need to worry about the termchar, because the final byte of a response also contains EOI. EOI causes the driver to s
    top reading from the instrument because it knows that is the end of the response.
    You say you're having trouble, but you don't say what the symptom is. Is the read timing out? You might also want to use NI Spy to get a snapshot of what is going wrong.
    I hope this helps some.
    Dan Mondrik
    Senior Software Engineer, NI-VISA
    National Instruments

  • 1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id's and I can't log in and access those purchases.  I want to get back to being able to use one i

    1) I have multiple accounts at the iTunes store and none are now associated with my purchases...I think because passwords have been associated with various id’s and I can’t log in and access those purchases.  I want to get back to being able to use one id and password and be able to access those purchases.
    2) When I upgraded my iPhone 3gs, to the latest version 5.0.1 (9A405), is when I noticed that i couldn’t update my applications.  There are two names/accounts on the phone and prior to the update there was just the one.  I have tried entering every conceivable password that I have ever used and get the incorrect password error every time. The apps on the iPhone are apparently associated with several/different accounts.  I just want to get everything back to the way it was.  One id and one password with purchases associated with just one account that can be updated on my computer as well as my iPhone.

    Hello sadiepix,
    The following article details several things that can be done to quell iTunes' constant need for authorization.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Allen

  • Does anyone else have two Apple IDs? I can't get rid of one of them. It's associated with my iCloud account and I can't fix it. The password doesn't work.

    So, apparently I have two Apple IDs associated with my iPhone. One is an old aol address that got hacked and was shut down. Even aol doesn't recognize the email address anymore, and the password doesn't work. It's associated with my iCloud account, so now I can't access that account. My other Apple ID is with everything associated with my iPhone and everything works just fine. But now I can't get to my iCloud stuff. Has this ever happened to anyone else. The guy at the Apple store says he's never heard of it.

    Does the alert refer to "Local Items?"

  • Program associated with the creation of a virtual instrument of Lab View. Please help me

    I have a question with program associated with the creation of a virtual instrument of Lab View. 1.Create of virtual instrument based on the NI 9401 module fitted to the chassis NI Compaq DAQ (Ni-cDAQ-9172). Creating a virtual tool needed to implement the following counting impulses in impulse series, visualization of data through a digital indicator, comparing the number of impusite with pre-set value, that value can be assigned by the user. Indicator light when reaching in reaching the set number of pulses, the opportunity to reset the meter of a button on the front panel. Switch to digital output in reaching the set number. I hope someone can help me.
    Solved!
    Go to Solution.

    What is your question? You've described what the program is supposed to do, but it's not clear what you're asking about. Do you need help getting started? If so, have you gone through the LabVIEW tutorials? You and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free. Have you looked through the many examples that ship with LabVIEW for data acquisition?

  • Slow initial association with WRT54GS w/WRE54G

    I have 2 laptops and both are having problems with initial association with the WRT54GS and WRE54G.
    I had some initial problems with the WRE54G but have fallen back to a default install with no security for troubleshooting.
    However even with this default install, both laptops will do the initial attempt to associate with my SID, fail to acquire IP, and then grab an IP about 2 minutes or so after failure.
    Does anyone have an idea as to what would cause this and how do I speed up the acquisition of a valid IP?
    Thanks,
    GimmeFive

    I'm new here, too, and looking for solution to exact same problem. Starts at 54 mbps and then very quickly drops down to 11 then 2 then 1!  I've done no updates or changes since buying it.  I have V7.2.  My very old D-Link 524 worked better than this!  Sure hope someone has a solution. Keep in mind that I don't know what all the special language is, and since I work 60 hrs per week at 3 businesses, don't have time for much more than I'm doing.  So hope you explain VERY clearly what needs to be done if you have a solution.  Thanks so much for any help to any of us... : )

  • Wrong app associated with account

    I purchased a single app account and somehow ended up with photshop associated with it. I need InDesign, how do I fix it?

    Contact Adobe Support either by chat or via phone.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Leads and its associations with Custom Objects 4-15

    I have been trying to create a Real time report with Lead associating with Custom Objects 3 and 5. But the report does not show up any data. I know that we cannot associate Custom objects 1,2 and 3 with Lead. I wanted to know if we can associate Lead with Custom Objects 4-15 or not ?

    Yes. You have to define them in CO5 Layout.
    You should see Name, Contact and Custom Object 04 (you may have renamed it). Not the Id field.
    Then when you add THE CO5 layout to Contact Related section, you can add new association between Contact and CO4.
    Don't forgot to enable the Access Profiles in Contact, CO4 and CO5.

  • External Services in Task List Question.

    Hi,
       I have defined PMSV control key (for external services) in the PM Task list. Now this task when invoked creates a Purchase requision automatically with Account Assignment "F" and Item Category "D" (Service). The Item category "D" is greyed out in the purchase requision. Is there a way to create a purchase req with item catogary  "B" (Blanket order) automatically instead of "D" when the external services operation is invoked from the task Iist?
    Thanks,
    Ajay

    Hi Virendra,
          Thank you for your email so quickly. I do not want to change the document type and the account assignment. All i want to change is the Item category associated to the control key PMSV that creates a purchase requision with item category "D". I want the system to automatically create a pur req with item category "B".
    In the PM path you mentioned....i can only change the account assignment and document type
    In the MM path you mentioned i can just allow or disallow the item categories.
    Thanks
    Ajay

  • PM - External Services

    Dear Expert in PM,
    I'm interested to know about PM.
    Can i know How to procure External Services in PM module?
    What's the external services can purchase - must be raw material only or can be services ?
    If yes , how can we control all this purchasing in PM?
    point will given for your solution.
    Thnk you.

    Hi,
    External Operation:
    Equipment will be sent outside for the service. In this case, mostly service & spare parts will be given by service provider & they will charge the company in whole. So In operation, we need to mention the control key as PM02. In Maintain Control Key config, for PM02, externally processed operation should have been selected.
    So it will create the PR for the Operations & components. If company is providing spare parts to service provider, then component can be defined as L - Stock Item.
    Control key is the important input at operation level to decide following things.
    1. Operation => Internal / External
    2. Scheduling required or not
    3. Cost Calculation is required or not
    4. Confirmation required or not
    External Service Operation:
    Here, service provider will come to the site & he will provide the service. Here control key will be PM03. In this control key config, Service check box should be ticked.
    In this case, Service Master will be created & assigned to Maintenance Order. Against that, PR & PO will be created. Based on PO, Service Entry sheet will be created.
    Here also, either service provider or company will provide the spare parts. Based on that, item category should be maintained as N or L.
    Purchase Requisition
    This is based on the control key for the operations. For Materials, this is based on config Define Change Docs, Collective Purc. Req. Indicator, Operation.
    Regards,
    Maheswaran.

  • Firefox doesn't know how to open this address, because one of the following protocols (itms-service) isn't associated with any program or is not allowed in this

    Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
    You might need to install other software to open this address."
    tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
    trying to download an app related to a rewards gift card
    firefox and os versions are up to date on MacBook Air

    Hello!
    Would you please provide the link you were trying to visit?
    Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
    I hope we can help you solve your problem.

  • Binded fields associated with separate Web Service requests

    Hi,
    I'm attempting to create a Data Connection that allows the user to select from approximately 2000 attributes. Presently, my web service operation request takes in an ID value and returns an object encapsulating these 2000 attributes.
    If for example I have a "firstName" attribute is it possible to have 2 instances of this field on my form but associated with different request IDs?
    If so, how do I go about this?
    Thanks.

    I'm sorry but I'm not sure I'm grasping this fully.
    I see if I drag on 2 firstName fields onto the form that one has an instance number of 0 and the other an instance number of 1.
    But as these fields both belong to the same Web Service operation then surely they will contain the same values on population when the response is returned?
    I want them to contain different values, say "David" if the workItemID in the request is 245 and "John" if the workItemID in the request is 467 etc.
    Is it possible to configure this approach? Just want to clarify this.

  • HT1369 Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed and mobile programs associated with my non apple cellpho

    Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.

    I had this problem too and my roommate solved it!
    Go to 'Settings'
    'Music'
    Scroll to the bottom and enter your password to log onto your home sharing
    Then connect to iTunes and sync!

  • Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

    Hi Lync gurus,
    I have a weird issue:
    Just installed a Lync Standard 2013. 
    Everything works except I keep getting this error in Log: every 30 minute or so.
    First an Error:  Event 47067
    A server did not respond to HTTP request
    Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
    https://lyncserver.domain.local:444/LiveServer/UserPinService.
    Cause: Server might be down or the network path between servers might not be properly configured.
    Resolution:
    Please ensure that the server can be connected on the target port using telnet and then re-try.
    Then I get a Warning: Event 47068
    GetAndPublish web service failed.
    Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
    Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
    Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
    Resolution:
    Please ensure that the user services is reachable and the database is up and running.
    Thanks for any help

    Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
    Try to regenerate a new certificate for Lync Front End Server.
    Check all the services on Lync Front End Server are started.
    Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
    For the detailed steps:
    Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for