External sound doesn't play when connected to Mac Book Pro:

I plugged an external mp3 player into the audio input on my MB Pro, and in the sound system preferences it shows the input signal level responding but there is no sound coming out of the built in speakers on the Mac.  Nothing is muted and the volumes are all up.  I tried this on two different MB Pro's and the result is the same.  The audio is coming in, but no sound is heard. Does anyone know how to get the sound to work?  Thanks,
Matt

You're right. I just tried it & get the same as you described.
Here are 2 possible solutions:
http://www.ambrosiasw.com/utilities/wiretap/
http://www.rogueamoeba.com/freebies/

Similar Messages

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • I bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.\\\\\

    i bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • We have a router at home supposed to support 10 devices but when i try to connect my mac book pro it says another device is using your computer's ip address

    we have a router at home that is supposed to support 10 devices but when i try to connect my mac book pro it says another device is using my computer's ip address

    Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?

  • Error (200400) occurs when I try to connect my Mac Book Pro to Apple TV

    Every time I try to connect my Mac Book Pro to Apple TV error 200400 occurs.
    It connected once and functioned perfectly well. When I tried again the same error occurs. Again, and again.
    What is the issue?
    (My mac is new from 2012)

    Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?

  • Hi, i tried to connect my mac book pro on my tv. I can't clci kon mirror displays

    Hi, i tried to connect my mac book pro on my tv with my hdmi cable but when i click on displays, "arrangement" doesn't appear . Even if i click on detect displays, it doesn't work. Mirror displays doesn't appear on my screen. Does anybody get any idea ?
    Thanks a lot for your help
    Victoria

    Hello Victoria,
    It sounds like you are connecting your MacBook Pro with your television, but you are not getting additional options for your external display.
    I found an article with steps to troubleshoot issues with displays.  This article is for internal and external displays, so you can skip any steps referring to the internal display.  I recommend reviewing the section titled "No video or no signal, image distortion, 'snow,' or flickering" in the following article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • DVDPlayer not recognizing DVD. I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and will not recognize/play a dvd movie...it thinks it is a blank dvd.  The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4).

    IMAC DVD Player does not recognizing dvd movie . I have an IMAC (10.7.4) using DVDPlayer (vers. 5500.26.11) and it will not recognize/play a dvd movie...it thinks it is a blank dvd. The IMAC will play rented dvd movies.   The dvd movie plays fine on my Mac Book Pro (10.6.8) on the Pro's DVDPlayer (vers.5.4) abd in my external Sony DVD Player  The dvd move was made/burned on a PC.   Why will a dvd movie play on my Macbook Pro and not my IMAC?

    Hello:
    This is not an area I have much experience in......I rarely insert DVDs and I have never had a similar problem.
    When the DVD is in the drive (and DVD players is open) click on File>get disk info.
    Barry

  • What do i need to connect my mac book pro to the tv with the thunderbolt on the mac to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

    what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

    Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
    In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
    When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
    You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
    Thank everybody, especialy Zyriab, ne was the closest.
    High regards to everybody

  • How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
    Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

  • How do I connect my Mac book pro to Apple TV wireless

    I am not sure how to connect my Mac book pro to the tv with Apple TV wirelessly

    You need to enable home sharing in iTunes on MBP and Apple TV. You will also choose which photos to share within iTunes.
    Setting up Home Sharing for Apple TV (2nd generation and 3rd generation) - Apple Support
    Any movies would need to be imported to iTunes or pointed to it if on external drive.
    Back up your iTunes library by copying it to an external drive - Apple Support
    The movies would also need to be compatible with Apple TV
    H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    They would then be accessed by going to the Computers icon on Apple TV.
    Note: Computer needs to be on with iTunes running.

  • Which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

    which cable do I need to connect my Mac Book Pro to my Panasonic PV-GS150 video camera for transferring video to iMovie?

    I totally understand.
    Check some things from here, I have 2 and they have been great so far.
    Check here, lots of storage and reasonable prices. Also great support, you get to speak to a person
    Clean off your on the G5 drive and off you go.
    I suggest buying a second drive and setting it up for a back up, Time Machine or Carbon Copy Cloner, or SuperDuper (both "bootable" back up) All searchable on the web.
    http://eshop.macsales.com/search/elite+pro
    You can talk to a person for REAL advice, Phone: 800.275.4576  Ask about exporting to your G5 and and exporting to your existing OSX, you may only need a small inexpensive drive for this.
    Quick delivery and willing to help.
    Hope this makes you back up and running :-)
    Do get a back up drive, as it is not ""whether my drive will fail, as much as "when my drive fails"
    All the best

  • How to connect my mac book pro to network printer Canon IR 2010f?

    I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

    The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
    What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
    If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
    So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
    One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

  • How to connect my MAC Book Pro (2013) to a display?

    how to connect my MAC Book Pro (2013) to a display?

    When you have connected the monitor or the TV to the MBP, open System Preferences>Displays and it should show a category called Arrangement.  These links should give some of the details:
    http://support.apple.com/en-us/HT204154
    http://support.apple.com/en-us/HT202351
    Ciao.

  • How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    https://www.youtube.com/watch?v=72l_FLsXNAg
    I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
    also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

  • Is it possible to connect a mac book pro via thunderbolt and a dvi switchbox (multiple computers) to a thunderbolt display?

    Hi,
    I'm planning to buy a thunderbolt display.Since I have not only apple computers with a thunderbolt port I wonder if it's possible to connect my mac book pro via thunderbolt and a DVI switchbox via a "mini displayport to DVI connector" to the thunderbolt display at the same time. Thunderbolt is a bus architecture. Thus there must be an ingoing and an outgoing port on the display. The rearview of the display I've seen so far don't show this:
    If this is not possible then I must question the market chances of this product. Seems as if the product marketing guys exaggerated the launch of the thunderbolt technology.
    -ais-swiss

    ais-swiss wrote:
    How to connect windows laptop (vga) to thunderbolt display?
    AHHH??!!!!!!  Was that your original question??   I assumed you were trying to output FROM your computer (MacBook Pro w/ Thunderbolt) to the new display and then OUT to be the video source to a DVI switcher.
    MB Pro w/TB ---> TB Display ---> mDP-to-DVI adapter ---> DVI switcher
    So it seems as if it's not possible to use the thunderbolt display with the mini display port adapter to DVI you've mentioned.
    I did not understand that you were trying to use other PC's into a switcher and then THAT Video source to connect INTO the TB display.   If THAT is what you're trying to do, then NO....  You can NOT use the new TB Display to be used to display "FROM" a DVI switcher (and also can NOT be used to display from other Non-TB-Apple computers).
    I've also called apple. The statement was that one needs a computer with osx 10.6.x in order to connect the thunderbolt display. That makes it impossible to hook a windows pc or older mac to the new and shiny thunderbolt display.
    I wonder why apple doesn't state this in their technical descriptions...?
    -ais-swiss
    Actually, the state that information all over the Tech Specs on the Apple Store website.
    http://store.apple.com/us/product/MC914LL/A?mco=MTY3ODQ5OTY
    Here are two different statements from that webpage:
    So yes.... other NON-Apple PC's (or non-TB devices) do Not have the Thunderbolt technology (hardware/software) to be able to communicate with the TB display or other TB devices.

Maybe you are looking for

  • To make 10.4.11 boot disk

    I upgraded from 10.4.9 to .11 on my MacBook. Now I need to do a repair from utility, but my install .9 disk will not load. How can I download or create a .11 boot disk with repair option? I am in Africa and pay by the minute..! so I will only be able

  • [Ques]HANA BACKUP & Recovery ON CLOUD

    Even though SAP HANA database is a IN-Memory database ,i.e data residing in memory ,it has got its own persistency.Data is always saved from memory to disk at save points and data changes are written into redo log files.So that in case of failure the

  • Exception in SAP Application Integrator occured while proccesing HCM F&P

    Hi I am getting following error, while Start Process.It's part of the HR Administrator; HCM forms & Proccess. Open Process Portal Runtime Error An exception occurred while processing your request Exception id: 05:05_11/03/10_0004_9166150 See the deta

  • Aperture JPEG export behavior: How does it handle non-versioned JPEGs?

    I routinely export Aperture images as 98% JPEG. I understand what this does for my RAW images and I think I know what Aperture does for JPEG originals that I've edited. I wonder, however, what it does for my JPEG originals that I've not edited. I wan

  • How do managed servers share datasource?

    Hi all, my db is experience very high number of connections from my weblogic instance. I would reckon that the number of session configured in my db is too low. In view of this, i would like to find out the following: when i configure a particular a